Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Containers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Electrochemistry of soluble UO 2 2+ from the direct dissolution of UO 2 CO 3 in acidic ionic liquid containing water

The direct dissolution of UO 2 CO 3 in neat and “wet” ionic liquid (IL) trimethyl-n-butylammonium bis(trifluoromethansulfonyl)imide [Me 3 N n Bu][TFSI] is examined. The ionic liquid serves as both the solvent for the direct dissolution of UO 2 CO 3 (s) and the electrolyte solution for the electrochemical analysis of the soluble uranyl species. The solubility data indicate that displacement of the CO 3 2- occurs slowly due to the low concentration of protons available from residual water in the pristine IL. Enhanced dissolution of UO 2 CO 3 through the formation of carbonic acid H 2 CO 3 is achieved after the addition of acid, bis(trifluoromethanesulfonyl)amide (HTFSI) and water. The soluble uranyl cation can then coordinate with the TFSI anion in place of the displaced CO 3 2- anion following the decomposition of carbonic acid and purging of CO 2 (g) and water from the IL. The solubility of UO 2 CO 3 was examined using liquid scintillation counting of 233 U for the pristine ionic liquid. The “wet” ionic liquid containing HTFSI and soluble UO 2 CO 3 was evaluated using UV/vis spectroscopy before and after dissolution. The electrochemical deposition of uranium species from ionic liquid was evaluated using cyclic voltammetry. The potential mediated deposition of uranium species was achieved and verified using scanning electron microscopy (SEM) and the solid uranium deposits were evaluated using energy dispersive X-ray emission spectroscopy (EDX).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deconvoluting sources of failure in lithium metal batteries containing NMC and PEO-based electrolytes

Solid-state lithium metal batteries (SSLMBs) containing polyethylene oxide (PEO)-derived polymer electrolytes and high-voltage (> 4 V vs. Li/Li + ) cathode materials suffer from three sources of failure: (1) instability between the polymer electrolyte and cathode at high voltage, (2) instability of the polymer electrolyte with Li metal, and (3) poorly-designed cathodes. In this study, these three sources of failure are deconvoluted by studying Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC, x ≥ 0.6) cathodes and a gel polymer electrolyte (GPE) derived from PEO. Initial cycling data reveals that rapid capacity fade occurs regardless of whether soft short circuits form due to Li dendrites. Cyclic voltammetry scans on cells featuring a Li metal electrode, GPE, and a NMC811 electrode free of additives suggest that there are no runaway reactions between the GPE and NMC811 up to 4.5 V vs. Li/Li + . Cathode/cathode symmetric cell cycling demonstrates that Li metal reactivity is a prime source of failure, though a poorly-designed cathode leads to subpar performance. A cathode with single-crystal NMC particles was demonstrated to achieve better initial capacity and longer cycle life, indicating room for improvement in SSLMB cathode design. Therefore, the sources of failure as enumerated may be ranked as follows from most to least concerning: 2 > 3 > 1.

25 ENERGY STORAGE↗
DOE OSTI2021

Reversible function switching of Ag catalyst in Mg/S battery with chloride-containing electrolyte

Rechargeable Mg/S batteries suffer from fast capacity decay because of the difficult re-oxidation of MgS. To tackle this problem, we used Ag catalyst in Mg/S cells with Cl- containing electrolyte, and achieved a greatly improved specific capacity of ~1200 mAh•g -1 and a long cycling life of 100 cycles. To understand the mechanism behind this improvement, we employed in-situ synchrotron radiation X-ray diffraction and in-situ X-ray absorption spectroscopy tools to study the reversible phase transitions during charge/discharge cycling. Additionally, the in-situ experiment results revealed that, at deeply charged state, Ag reacted with Cl- in the electrolyte to form the AgCl interfacial layer which prevented the physical contact of Ag with elemental S and avoided the formation of Ag 2 S; at early discharged state, AgCl transformed back to metallic Ag, which guaranteed its catalytic effectiveness for MgS decomposition. This reversible function switching mechanism of Ag catalyst is completely different from that in Mg/S cells using other catalysts or electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2018

Catalytic generation of methane at 60–100 °C and 0.1–300 MPa from source rocks containing kerogen Types I, II, and III

Low temperature (60 and 100 °C) and long-term (6 months to 5 years) heating of pre-evacuated and sterilized shales and coals containing kerogen Types I (Mahogany Shale), II (Mowry Shale and New Albany Shale), and III (Springfield Coal and Wilcox Lignite) with low initial maturities (vitrinite reflectance Ro 0.39–0.62%) demonstrates that catalytically generated hydrocarbons may explain the occurrence of some non-biogenic natural gas accumulations where insufficient thermal maturity contradicts the conventional thermal cracking paradigm. Extrapolation of the observed rate of catalytic methanogenesis in the laboratory suggests that significant amounts of sedimentary organic carbon can be converted to relatively dry natural gas over tens of thousands of years in sedimentary basins at temperatures as low as 60 °C. Here, our laboratory experiments utilized source rock (shale and coal) chips sealed in gold and Pyrex® glass tubes in the presence of hydrogen-isotopically contrasting waters. Parallel heating experiments applied hydrostatic pressures from 0.1 to 300 MPa. Control experiments constrained the influence of pre-existing and residual methane in closed pores of rock chips that was unrelated to newly generated methane. This study’s experimental methane yields at 60 and 100 °C are 5–11 orders of magnitude higher than the theoretically predicted yields from kinetic models of thermogenic methane generation, which strongly suggests a contribution of catalytic methanogenesis. Higher temperature, longer heating time, and lower hydrostatic pressure enhanced catalytic methanogenesis. No clear relationships were observed between kerogen type or total organic carbon content and methane yields via catalysis. Catalytic methanogenesis was strongest in Mowry Shale where methane yields at 60 °C amounted to ~2.5 μmol per gram of organic carbon after one year of hydrous heating at ambient pressure. In stark contrast to the earlier findings of hydrogen isotopic exchange between water and thermogenic methane in hydrous pyrolysis experiments above 300 °C, the hydrogen isotopic composition of added water exerted limited influence on the δ2H value of methane generated catalytically at low temperatures. We hypothesize that the catalytic sites responsible for methanogenesis are located in hydrophobic microenvironments with limited access to water. The δ13CCH4 values of methane generated catalytically at 60–100 °C range from ~–57.6 to –41.4‰ and are thus similar to typical thermogenic methane (δ13CCH4 >–50‰) and microbially generated methane (<–55‰). Future studies need to evaluate the possibility that clumped isotope characteristics of catalytically generated methane can diagnose the low-temperature regime of catalytic methanogenesis. Furthermore, testing of freshly cored anoxic rocks is needed to determine whether the use of archived, oxygen-exposed rocks in geochemical maturation/catalysis studies introduces artifacts in experimental hydrocarbon yields.

58 GEOSCIENCES↗
DOE OSTI2020

Coating adhesion of a chromate-containing epoxy primer on Al2024-T3 surface processed by laser-interference

In this work, the coating adhesion test results are presented for a primer that was coated on laser-interference structured surfaces of as-received Al2024-T3 specimens, i.e., without employing any polishing, cleaning, or any other surface alteration techniques. All of the laser-interference processing was performed by splitting the primary beam of a Q-switched Nd:YAG pulsed nanosecond laser into two beams and focused them to the same spot. The specimens were spray painted with a chromate-containing epoxy primer, CA7233, compliant to MIL-PRF-23377 Type I Class C2 specification. The adhesion of primer on Al surface with different treatments was assessed using the ASTM D3359 X-cut and cross-hatch tests. It was found that the laser processed specimens meet the performance requirements in the coating adhesion specifications by having a higher or identical ranking for coating adhesion specimens than those prepared with current state-of-the-art chemical conversion or sulfuric acid anodizing. The rastering with either 4 mm/s or 6 mm/s with a laser fluence of 1.78 J/cm2 is recommended to attain acceptable coating adhesion, even higher than that with the anodizing surface treatment.These results indicate that laser-interference shows significant potential as a non-chemical surface preparation technique for these coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2019

“The development of a through-plane reactive excitation technique for detection of pinholes in membrane-containing MEA sub-assemblies”

As markets for polymer-electrolyte-membrane fuel cells (PEMFC) expand, there continues to be a need for the development and implementation of in-line quality inspection techniques to enable high-volume manufacturing methods for membrane-electrode assemblies (MEAs). These techniques mitigate the potential impact of poor quality on the cost of MEA components by real-time identification of process-induced irregularities, which can result from the manufacturing process or subsequent handling of the material during assembly into a full MEA. A particular type of irregularity known to impact MEA lifetime is loss of membrane integrity, e.g. via a pinhole. In this work, we focus on development of a technique to detect pinholes in membrane-containing MEA sub-assemblies - as opposed to in just the membrane - using a reactive excitation strategy coupled with infrared thermography for detection. A specialized device is introduced and, using various MEA sub-assemblies, is shown to enable detection of pinholes in stationary samples. Multi-physics modeling is utilized to understand and predict the impact of various design and operational parameters of this technique. The feasibility of the technique is demonstrated through both modeling and in-situ results. For example, a detectable (≥1 degree C) thermal response for a membrane pinhole of approximately 90 um in diameter is measured in a fraction of a second. The observed detection time is considered to be appropriate for further exploration of the technique in an in-line configuration.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2018

In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning

Due to the excellent balance of strength and ductility exhibited by some Mg-Zn-RE (Y subgroup rare earth element) alloys, which contain icosahedral quasicrystalline precipitates, it is of interest to examine their deformation mechanisms. Furthermore, the internal strain evolution Mg-3at%Zn-0.5 at%Y with 4 vol% i-phase was measured using in-situ neutron diffraction. The extruded samples exhibit an initially weak <10.0> || extrusion direction “rod texture,” distinct from the normally strong texture of extruded Mg alloys, but the grain size is unexceptional (16.7 ± 2.1 μm). The initially weak texture contributes to a nearly symmetric yielding response between tension and compression. The hardening responses are asymmetric, however, since {10.2} extension twinning is significantly more active during compressive straining, despite the initially weak texture. In-situ neutron diffraction tension and compression experiments parallel to the extrusion direction, together with elasto-plastic self-consistent (EPSC) crystal plasticity modeling, reveal the strength and hardening behavior of individual slip and twinning modes. A model that was previously published about twinning-detwinning (TDT) is implemented within the EPSC framework, and it is proven effective for describing the observed, mild tension-compression asymmetry. This is not possible with previous EPSC-based models of twinning. Finally, the description of hardening within the TDT model is modified, in order to accurately describe the evolution of internal strains within the twins.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Thermoelectric Properties of Au- Containing Type-I Clathrates Ba8AuxGa16-3xGe30+2x

Type I clathrates, with compositions based on Ba8Ga16Ge30, are a class of promising thermoelectric materials due to their intrinsically low thermal conductivity. It has been demonstrated previously that the thermoelectric performance can be improved by transition metal substitution of the framework atoms. In this study, the effects of Au substitution for Ga/Ge on thermal and electrical transport properties of type I clathrate compounds have been investigated. Polycrystalline samples with a large range of Au content have been synthesized using conventional solid state techniques with the actual compositions of resulting materials approximately following Zintl-Klemm rules. The charge carrier type changes from electrons (n) to holes (p) as the Au content increases. The Seebeck coefficient (S) and power factor (S2/ where is the electrical resistivity) were improved by Au substitution and the resulting overall thermoelectric properties were enhanced by Au substitution with a thermoelectric figure of merit ZT ~ 0.63 at temperature T = 740 K for the composition Ba8Au5.47Ge39.96. The results presented herein show that Au-containing type I clathrates are promising p-type thermoelectric materials for high temperature applications.

Clathrates↗
DOE OSTI2015

Nano-twin Mediated Plasticity in Carbon-containing FeNiCoCrMn High Entropy Alloys

Equiatomic FeNiCoCrMn alloy has been reported to exhibit promising strength and ductility at cryogenic temperature and deformation mediated by nano-twining appeared to be one of the main reasons. We use the FeNiCoCrMn alloy as a base alloy to seek further improvement of its mechanical properties by alloying additional elements, i.e., interstitial carbon. Moreover, the effects of carbon on microstructures, mechanical properties and twinning activities were investigated in two different temperatures (77 and 293 K). With addition of 0.5 at% C, the high entropy alloy still remains entirely single phase face-centered cubic (FCC) crystal structure. We found that these materials can be cold rolled and recrystallized to produce a microstructure with equiaxed grains. Both strain hardening rate and strength are enhanced while high uniform elongations to fracture (~70% at 77 K and ~40% at 293 K) are still maintained. The increased strain hardening and strength could be caused by the promptness of deformation twinning in C-containing high entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High hardness and oxidation-resistant Cr-containing medium entropy ZrTaW diboride

This study reports the successful synthesis of a Cr-containing (Zr 0.30 Ta 0.34 Cr 0.06 W 0.30 )B 2 medium-entropy boride (MEB) via an in-situ reactive borothermal reduction route from oxide precursors. High-energy ball milling was employed to homogenize the precursor mixture prior to reactive densification. X-ray diffraction confirmed the formation of a predominantly AlB₂-type hexagonal diboride structure together with a secondary (W X , M 1-X )B monoboride phase. Microstructural characterization revealed compositional heterogeneity and localized W-rich regions associated with the secondary phase. The synthesized medium-entropy boride exhibited enhanced mechanical properties, which are attributed to lattice distortion and solid-solution strengthening effects. Thermogravimetric analysis revealed complex multistage oxidation behavior, and the oxidation resistance was compared with conventional ultra-high-temperature diborides. The results demonstrate the strong relationship between oxide-derived processing, compositional complexity, phase evolution, and oxidation behavior, highlighting the potential of medium-entropy borides for high-temperature structural applications

36 MATERIALS SCIENCE↗
DOE OSTI2023

Pyridine-containing substrate analogs are restricted from accessing the human cytochrome P450 8B1 active site by tryptophan 281

The human oxysterol 12α-hydroxylase cytochrome P450 8B1 (CYP8B1) is a validated drug target for both type 2 diabetes and nonalcoholic fatty liver disease, but effective selective inhibitors are not yet available. Herein, steroidal substrate-mimicking compounds with a pyridine ring appended to the C12 site of metabolism were designed as inhibitors, synthesized, and evaluated in terms of their functional and structural interactions with CYP8B1. While the pyridine nitrogen was intended to coordinate the CYP8B1 active site heme iron, none of these compounds elicited shifts in the CYP8B1 Soret absorbance consistent with this type of interaction. However, when CYP8B1 was cocrystallized with the pyridine-containing compound with the 3-keto-Δ4 steroid backbone most similar to the endogenous substrate, it was apparent that this ligand was bound in a channel leading to the active site, instead of near the heme iron. Inspection of this structure suggested that tryptophan 281 directly above the heme might restrict active site binding of potential inhibitors with this design. This hypothesis was supported when a CYP8B1 W281F mutation did allow all three compounds to coordinate the heme iron as designed. These results indicated that the design of next-generation CYP8B1 inhibitors should be compatible with the low-ceiling tryptophan immediately above the heme iron.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Alkali-activated slag (AAS) and OPC-based composites containing crumb rubber aggregate: Physico-mechanical properties, durability and oxidation of rubber upon NaOH treatment

Value-added utilization of waste tires in cementitious materials has been studied for decades, whereas the synergy between rubber and alkali-activated cements deserves more investigations. To this end, we compared physico-mechanical and durability properties of alkali-activated slag (AAS) and OPC-based composites containing NaOH-pretreated/as-received crumb rubber (CR). It was found that the incorporation of CR had both positive and negative effects on specimens due to its special attributes. CR reduced electrical conductivity which was associated with the ion transport ability, since it worked as an electrical insulator and increased hydrophobicity of pore walls. The sulfate expansion decreased with CR content because the flow of sulfate ions was demobilized, and the flexibility of CR relieved the internal stress. CR also improved the freeze-thaw durability of composites if the total CR content was less than 30% in specimens. However, the low Young's modulus of CR impaired the compressive strength and failed to effectively control the total shrinkage upon drying. The composites with CR must avoid high temperature exposure which resulted in the pyrolysis of rubber. In addition, the NaOH pretreatment enhanced adhesion between CR and hydrated cement and improved overall performances of composites. The FTIR spectra confirmed the NaOH-induced accelerated oxidation of CR surface and the generation of polar functional groups including carbonyl and carboxyl groups, increasing the total surface energy of rubber. More importantly, the alkali-activation process for AAS could treat the CR aggregate in the meantime, which means the use of CR in alkali-activated cements does not require the pretreatment of CR before blending.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Self-consistent solution of the Frank–Bilby equation for interfaces containing disconnections

The quantized Frank–Bilby equation can be used to identify interfacial line defect array configurations which relax the misorientation and/or misfit of a coherent crystalline interface. These line defect arrays may be comprised of dislocations and/or disconnections, which are interfacial steps with dislocation character. When an interface contains disconnections, solution of the quantized Frank–Bilby equation is complicated by the fact that the habit plane orientation is not known in advance because it depends on the unknown spacing of the disconnection array. We present a root-finding-based method for addressing this issue, enabling a self-consistent solution for arbitrary defect content. Our method has been implemented in an open-source code which enumerates all possible solutions given a list of candidate line defects. Two cases are presented employing the code: a misoriented FCC twin boundary and an FCC/BCC phase boundary with the Nishiyama-Wasserman orientation relationship. Both cases exhibit more than 10,000 solutions to the Frank–Bilby equation, with several hundred solutions categorized as ‘‘low energy’’ and thus plausible configurations for the actual interface. The resulting set of solutions can be utilized to predict and understand the properties of a given interface.

42 ENGINEERING↗
DOE OSTI2017

Synthesis and characterization of novel phosphate glass matrix nanocomposites containing polyhedral oligomeric silsesquioxane with improved properties

The preparation and characterization of novel tin fluorophosphate glass (Pglass) matrix nanocomposite materials containing nanoscale trisilanolphenyl polyhedral oligomeric silsesquioxane (POSS) prepared via classical glass synthesis was investigated here to accelerate efforts to develop novel hybrid Pglass/POSS nanocomposites with enhanced benefits in suitable diverse applications. The glass transition temperatures (T g ) of the obtained nanocomposites ranged from 121.6° to 147.6 °C to an extent that depends on the nano-POSS concentrations (≤ 10 wt% POSS) in the nanocomposites. The obtained scanning electron microscopy with energy-dispersive x-ray spectroscopy and atomic force microscopy results confirmed the homogeneous molecular level dispersion of the POSS cages in the continuous Pglass matrix of the nanocomposite. Chemical reaction (or bonding) between the constituents of the nanocomposites was confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and nuclear magnetic resonance spectroscopy. The rheological (storage and loss modulus) and nanomechanical (elastic modulus) properties of the nanocomposites significantly improved with increasing nano-POSS concentrations up to 10 wt% POSS. The molecular dispersion of the POSS and its strong physicochemical interaction with the continuous Pglass matrix can be tailored to satisfy requirements of a number of optomechanical applications where the pure glass is not useable.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ruthenium solubility and its impact on the crystallization behavior and electrical conductivity of MoO 3 -containing borosilicate-based model high-level nuclear waste glasses

The present study focuses on investigating the solubility of RuO 2 in a borosilicate-based model high-level waste glass and understanding its impact on the crystallization behavior and electrical conductivity of the resulting vitrified waste forms. The solubility limit of RuO 2 in the investigated glass composition has been determined to be 460 ppm by weight. The higher concentration of RuO 2 results in sub-micron sized Ru-rich inclusions in the glassy matrix, which eventually agglomerate to form needle-like and polyhedral RuO 2 crystals. It is observed that RuO 2 selectively promotes the crystallization of the rare-earth apatite phase over the powellite phase. The as-synthesized RuO 2 -containing glasses exhibit semiconducting behavior with a similar level of electrical conductivity below the glass transition. Here, the percolation of non-uniformly distributed RuO 2 inclusions may result in a formation of short-range low-resistive conduction pathways in the host glass matrix leading to an apparent metallic-like behavior of selected thin samples with the highest ruthenium content.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The S solubility of Cr and Al containing simulated low-activity waste glass

Here, the presence of sulfur-containing molten salt phases during vitrification is a particular problem which can be detrimental to the melter. Borosilicate compositions were designed to explore both the effects of a fixed amount of Cr, as Cr 2 O 3 or Na 2 CrO 4 , and the impact of Al 2 O 3 , on sulfur solubility as determined by progressively adding elemental S. The NABS series (with Al 2 O 3 ) has a higher SO 3 solubility of ~3.5 mol% while the NBS series (without Al 2 O 3 ) has a SO 3 solubility of ~2 mol%. Crystalline Cr 2 O 3 formed in the NABS series upon the addition of S but is not present in the NBS series. At the highest S addition, a separate salt phase always forms, and was identified as Na 2 (S,Cr)O 4 via electron dispersive spectroscopy, ultraviolet-visible spectroscopy, x-ray diffraction, and thermal analysis. Magic angle spinning nuclear magnetic resonance identified no change in the B coordination in either series as S is added, suggesting that the Na is scavenged from other locations, such as the Si sites, to charge compensate sulfate, whether in the glass or in the salt. The Cr precursor identity did not affect the observed overall behavior regarding sulfur, but did impact Cr redox as identified with Raman spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Crystal structure of high-Zr inclusions in an alloy containing U, Pu, Np, Am, Zr and rare-earth elements

Researchers commonly observe high-Zr inclusions in actinide-Zr alloys. As there is very little published data on the crystal structures of these inclusions, it has generally been assumed that the inclusions were impurity-stabilized a-Zr. However, new electron-diffraction data from two high-Zr inclusions in an alloy containing U, Pu, Np, Am, Zr, and rare-earth elements show that these inclusions are not a-Zr (which has a hexagonal structure) but instead have a face-centered cubic structure. This data is unique in that it combines single-crystal diffraction patterns and microchemical analyses from individual inclusions. More data on other high-Zr inclusions is clearly required. However, the present results suggest that caution is needed in assuming that all high-Zr inclusions in actinide-Zr alloys are a-Zr.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Evolution of ion damage at 773K in Ni- containing concentrated solid-solution alloys

Quantitative analysis of the impact of the compositional complexity in a series of Ni-containing concentrated solid-solution alloys, Ni, NiCo, NiFe, NiCoCr, NiCoFeCr, NiCoFeCrMn and NiCoFeCrPd, on the evolution of defects produced by 1 MeV Kr ion irradiation at 773 K is reported in this paper. The dynamics of the evolution of the damage structure during irradiation to a dose of 2 displacements per atom were observed directly by performing the ion irradiations in electron transparent foils in a transmission electron microscope coupled to an ion accelerator. The defect evolution was assessed through measurement of the defect density, defect size and fraction of perfect and Frank loops. These three parameters were dependent on the alloying element as well as the number of elements. The population of loops was sensitive to the ion dose and alloy composition as faulted Frank loops were observed to unfault to perfect loops with increasing ion dose. Finally, these dependences are explained in terms of the influence of each element on the lifetime of the displacement cascade as well as on defect formation and migration energies.

36 MATERIALS SCIENCE↗