Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Component amounts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Modeling a Typical Winter-time Dust Event over the Arabian Peninsula and the Red Sea

We used WRF-Chem, a regional meteorological model coupled with an aerosol-chemistry component, to simulate various aspects of the dust phenomena over the Arabian Peninsula and Red Sea during a typical winter-time dust event that occurred in January 2009. The model predicted that the total amount of emitted dust was 18.3 Tg for the entire dust outburst period and that the two maximum daily rates were ~2.4 Tg/day and ~1.5 Tg/day, corresponding to two periods with the highest aerosol optical depth that were well captured by ground- and satellite-based observations. The model predicted that the dust plume was thick, extensive, and mixed in a deep boundary layer at an altitude of 3-4 km. Its spatial distribution was modeled to be consistent with typical spatial patterns of dust emissions. We utilized MODIS-Aqua and Solar Village AERONET measurements of the aerosol optical depth (AOD) to evaluate the radiative impact of aerosols. Our results clearly indicated that the presence of dust particles in the atmosphere caused a significant reduction in the amount of solar radiation reaching the surface during the dust event. We also found that dust aerosols have significant impact on the energy and nutrient balances of the Red Sea. Our results showed that the simulated cooling under the dust plume reached 100 W/m2, which could have profound effects on both the sea surface temperature and circulation. Further analysis of dust generation and its spatial and temporal variability is extremely important for future projections and for better understanding of the climate and ecological history of the Red Sea.

Arabian↗

Partitioning of transition metals between diopside and coexisting silicate liquids. I - Nickel, cobalt, and manganese

Distribution coefficients have been found for the partitioning of Ni, Co, and Mn between calcium-rich clinopyroxenes and coexisting silicate liquids. Values are found for the 1110-1360 C temperature range. The breakdown of Henry's Law was not observed. The measured clinopyroxene/liquid distribution coefficients ranged from 1.5-14.0 for Ni, 0.5-2.0 for Co, and 0.3-1.2 for Mn. Analyses of pyroxenes grown from charges differing in the amounts of transition metals indicate that Ni and Co occupy the M1 site of diopside and that Mn occupies the M1 and M2 sites. Equilibrium constants were found in terms of the activities of the components in the liquid and solid phases. These activities are based on the mole fractions. An activity/concentration model was used for the liquid phase in order to explain the variations in the clinopyroxene/liquid coefficients due to bulk composition.

Lindstrom, D. J.↗

Advanced spacecraft: What will they look like and why

The next century of spaceflight will witness an expansion in the physical scale of spacecraft, from the extreme of the microspacecraft to the very large megaspacecraft. This will respectively spawn advances in highly integrated and miniaturized components, and also advances in lightweight structures, space fabrication, and exotic control systems. Challenges are also presented by the advent of advanced propulsion systems, many of which require controlling and directing hot plasma, dissipating large amounts of waste heat, and handling very high radiation sources. Vehicle configuration studies for a number of theses types of advanced spacecraft were performed, and some of them are presented along with the rationale for their physical layouts.

Price, Humphrey W.↗

Variation in energy balance components from six sites in a native prairie for three years

Six automatic stations were used to evaluate the surface energy and radiation balances on a native prairie near Manhattan, Kansas, using the Bowen ratio technique for a total of 300 days. Data were taken during the periods from May 26 to October 16, 1987, May 10 to September 18, 1988, and July 21 to August 13, 1989. The station site locations were selected to represent burned and unburned treatments on ridges, valley bottoms, and slopes with various aspects. The measured variables were (1) air and wet bulb temperatures at two heights, (2) net radiation, (3) solar radiation (up and down), (4) total hemispherical radiation (up and down), (5) diffuse radiation, (6) soil heat flow and soil temperature, (7) wind speed, (8) wind direction, and (9) precipitation. Energy balance components at the sites were compared for the 3 years. The variation between sites and years was small, even though some sites were as much as 10 km apart and the years had different rainfall amounts. The average values for the four summer intensive field campaigns (IFCs) were as follows: albedo, 0.2; ratio of net radiation to solar radiation, 62 percent; evaporation equivalent, 4 mm/d; Bowen ratio, 0.32; evaporation fraction, 70 percent; and the ratio of evaporation to solar energy, 40 percent. These values were different for the fall IFC. The latent and sensible heat fluxes were more variable than the radiation terms reflecting soil moisture differences between IFCs.

Fritschen, Leo J.↗

Infrared Measurements of Several Nitrogen Species Above the South Pole in December 1980 and November - December 1986

In December 1980 and November-December 1986, the University of Denver atmospheric spectroscopy group recorded numerous high-resolution infrared solar absorption spectra from the Amundsen-Scott south pole station. These spectra were obtained by Frank J. Murcray and Frank H. Murcray with a Michelson-type Fourier transform spectrometer and show absorption features of a number of minor and trace atmospheric gases with a minimum of atmospheric water vapor absorption. Quantifications of the total column amounts of O3, CH4, N2O, and H2O from the 1980 observations and RCI from the 1986 observations have been reported along with an atlas of the 750-960/ cm spectral region. In the present study, we report measurements of HNO3 total column amounts deduced from both data sets and NO, and NO2 total column amounts from the 1986 data set. Nitric acid may be important in the chemistry which creates the spring Antarctic ozone minimum, since it may condense in the cold winter polar stratosphere and become the dominant component of polar stratospheric clouds. The present measurements were obtained shortly after the austral spring ozone minimum and define for the first time the ambient levels of these nitrogen species immediately following the breakup of the polar vortex.

Murcray, F. J.↗

MSLICE Science Activity Planner for the Mars Science Laboratory Mission

MSLICE (Mars Science Laboratory InterfaCE) is the tool used by scientists and engineers on the Mars Science Laboratory rover mission to visualize the data returned by the rover and collaboratively plan its activities. It enables users to efficiently and effectively search all mission data to find applicable products (e.g., images, targets, activity plans, sequences, etc.), view and plan the traverse of the rover in HiRISE (High Resolution Imaging Science Experiment) images, visualize data acquired by the rover, and develop, model, and validate the activities the rover will perform. MSLICE enables users to securely contribute to the mission s activity planning process from their home institutions using off-the-shelf laptop computers. This software has made use of several plug-ins (software components) developed for previous missions [e.g., Mars Exploration Rover (MER), Phoenix Mars Lander (PHX)] and other technology tasks. It has a simple, intuitive, and powerful search capability. For any given mission, there is a huge amount of data and associated metadata that is generated. To help users sort through this information, MSLICE s search interface is provided in a similar fashion as major Internet search engines. With regard to the HiRISE visualization of the rover s traverse, this view is a map of the mission that allows scientists to easily gauge where the rover has been and where it is likely to go. The map also provides the ability to correct or adjust the known position of the rover through the overlaying of images acquired from the rover on top of the HiRISE image. A user can then correct the rover s position by collocating the visible features in the overlays with the same features in the underlying HiRISE image. MSLICE users can also rapidly search all mission data for images that contain a point specified by the user in another image or panoramic mosaic. MSLICE allows the creation of targets, which provides a way for scientists to collaboratively name features on the surface of Mars. These targets can also be used to convey instrument-pointing information to the activity plan. The software allows users to develop a plan of what they would like the rover to accomplish for a given time period. When developing the plan, the user can input constraints between activities or groups of activities. MSLICE will enforce said constraints and ensure that all mission flight rules are satisfied.

Powell, Mark W.↗

Low transient thermal stress turbine engine components

A turbine vane includes a platform; and at least one airfoil mounted to the platform and having a trailing edge and a leading edge, wherein the vane is composed of a functionally graded material having a first material and a second material, wherein the trailing edge includes a greater amount of the first material than the second material, and the leading edge includes a greater amount of the second material than the first material.

42 ENGINEERING↗

Development of an integrated BEM approach for hot fluid structure interaction: BEST-FSI: Boundary Element Solution Technique for Fluid Structure Interaction

As part of the continuing effort at NASA LeRC to improve both the durability and reliability of hot section Earth-to-orbit engine components, significant enhancements must be made in existing finite element and finite difference methods, and advanced techniques, such as the boundary element method (BEM), must be explored. The BEM was chosen as the basic analysis tool because the critical variables (temperature, flux, displacement, and traction) can be very precisely determined with a boundary-based discretization scheme. Additionally, model preparation is considerably simplified compared to the more familiar domain-based methods. Furthermore, the hyperbolic character of high speed flow is captured through the use of an analytical fundamental solution, eliminating the dependence of the solution on the discretization pattern. The price that must be paid in order to realize these advantages is that any BEM formulation requires a considerable amount of analytical work, which is typically absent in the other numerical methods. All of the research accomplishments of a multi-year program aimed toward the development of a boundary element formulation for the study of hot fluid-structure interaction in Earth-to-orbit engine hot section components are detailed. Most of the effort was directed toward the examination of fluid flow, since BEM's for fluids are at a much less developed state. However, significant strides were made, not only in the analysis of thermoviscous fluids, but also in the solution of the fluid-structure interaction problem.

Dargush, G. F.↗

Toward Understanding the Effect of Low-Activity Waste Glass Composition on Sulfur Solubility

The concentration of sulfur in nuclear waste glass melter feed must be maintained below the point where salt accumulates on the melt surface. The allowable concentrations may range from 0.37 to over 2.05 weight percent (of SO3 on a calcined oxide basis). If the amount of sulfur exceeds its tolerance level a molten salt will accumulate and upset melter operations and potentially shorten melter useful life. Therefore relatively conservative limits have been placed on sulfur loading in melter feed which in-turn significantly impacts the amount of glass that will be produced, in particular at the Hanford site. Crucible-scale sulfur solubility data and scaled melter sulfur tolerance data have been collected on simulated Hanford waste glasses over the last 15 years. These data were compiled and analyzed. A model was developed to predict the solubility of SO3 in glass based on 312 individual glass compositions. This model was shown to well represent the data, accounting for over 80% of the variation in data and was well validated. The model was also found to accurately predict the tolerance for sulfur in melter feed based on 19 scaled melter tests. The model is appropriate for control of waste glass processing which includes uncertainty quantification. The model also gives quantitative estimates of component concentration effects on sulfur solubility. The components that most increase sulfur solubility are Li2O > V2O5 ≈ TiO2 < CaO < P2O5 ≈ ZnO. The components that most decrease sulfur solubility are Cl > Cr2O3 > SiO2 ≈ ZrO2 > Al2O3.

Borosilicate↗

Deep Eutectic Solvents for Pretreatment of Lignocellulose Biomass: Physical Properties, Solubility Mechanisms, and Their Interactions

As the most accessible and abundant renewable resource on earth, lignocellulosic biomass mainly consists of cellulose, hemicelluloses, and lignin with a small amount of protein, pectin, minerals, and extractives (e.g., tannins, lipids, and resins). Lignocellulosic biomass has gained extensive attention in industry and research owing to its renewability, availability, and low cost. However, achieving efficient fractionation of lignocellulose components and all-component utilization in a green and cost-effective manner remains a challenge dueto biomass recalcitrance. Deep eutectic solvents (DESs) have received considerable attention because they are biocompatible, inexpensive, biodegradable, have low toxicity, and are easy to prepare and recycle; these characteristics strongly depend on individual components involved in DESs preparation. This review systematically summarizes recent progress in the fractionation of carbohydrates (cellulose and hemicelluloses) and lignin from biomass using DESs, with particular emphasis on the effects of DES types and pretreatment parameters on fractionation efficiency. The subsequent conversion and upgrading of the DES-fractionated products (i.e., carbohydrates and lignin) are comprehensively analyzed. Finally, the challenges and future prospects of lignocellulose biomass fractionation using DESs are proposed in view of the existing limitations. This review provides an in-depth understanding of lignocellulose biomass fractionation during DESs processing, offering insights to improve current pretreatment methods and/or to explore new pretreatment methods aimed at mitigating the global energy crisis.

Mqoni, Ntebogeng [North-West University (Mafikeng ↗

Photoluminescence polarization anisotropy for studying long-range structural ordering within semiconductor multi-atomic alloys and organic crystals

Long-range structural ordering within multi-component semiconductor alloys and organic crystals leads to significant optical anisotropy and, in particular, to anisotropy of the photoluminescence (PL) emission. The PL emission of ternary and quaternary semiconductor alloys is polarized if there is some amount of the atomic ordering within the crystal structure. We analyze the polarization of the PL emission from the quaternary GaInAsP semiconductor alloy grown by Liquid Phase Epitaxy (LPE) and conclude that it could be caused by low degree atomic ordering within the crystal structure together with the thermal biaxial strain due to difference between the thermal expansion coefficients of the layer and the substrate. We also study the state of polarization of the PL from organic crystals in order to identify different features of the crystal PL spectrum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE LUMINOSITY PROFILE AND STRUCTURAL PARAMETERS OF THE ANDROMEDA GALAXY

We have constructed an extended composite luminosity profile for the Andromeda galaxy, M31, and have decomposed it into three basic luminous structural components: a bulge, a disk, and a halo. The dust-free Spitzer/Infrared Array Camera (IRAC) imaging and extended spatial coverage of ground-based optical imaging and deep star counts allow us to map M31's structure from its center to 22 kpc along the major axis. We apply, and address the limitations of, different decomposition methods for the one-dimensional luminosity profiles and two-dimensional images. These methods include nonlinear least-squares and Bayesian Monte Carlo Markov chain analyses. The basic photometric model for M31 has a Sersic bulge with shape index n {approx_equal} 2.2 {+-} .3 and effective radius R{sub e} = 1.0 {+-} 0.2 kpc, and a dust-free exponential disk of scale length R{sub d} = 5.3 {+-} .5 kpc; the parameter errors reflect the range between different decomposition methods. Despite model covariances, the convergence of solutions based on different methods and current data suggests a stable set of structural parameters. The ellipticities ({epsilon} = 1 - b/a) of the bulge and the disk from the IRAC image are 0.37 {+-} 0.03 and 0.73 {+-} 0.03, respectively. The bulge parameter n is rather insensitive to bandpass effects and its value (2.2) suggests a first rapid formation via mergers followed by secular growth from the disk. The M31 halo has a two-dimensional power-law index {approx_equal} - 2.5 {+-} 0.2 (or -3.5 in three-dimensional), comparable to that of the Milky Way. We find that the M31 bulge light is mostly dominant over the range R{sub min} {approx}< 1.2 kpc. The disk takes over in the range 1.2 kpc {approx}< R{sub min} {approx}< 9 kpc, whereas the halo dominates at R{sub min} {approx}> 9 kpc. The stellar nucleus, bulge, disk, and halo components each contribute roughly 0.05%, 23%, 73%, and 4% of the total light of M31 out to 200 kpc along the minor axis. Nominal errors for the structural parameters of the M31 bulge, disk, and halo amount to 20%. If M31 and the Milky Way are at all typical, faint stellar halos should be routinely detected in galaxy surveys reaching below {mu}{sub i} {approx_equal} 27 mag arcsec{sup -2}. We stress that our results rely on this photometric analysis alone. Structural parameters may change when other fundamental constraints, such as those provided by abundance gradients and stellar kinematics, are considered simultaneously.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting bulge to total luminosity ratio of galaxies using deep learning

ABSTRACT We present a deep learning model to predict the r-band bulge-to-total luminosity ratio (B/T) of nearby galaxies using their multiband JPEG images alone. Our Convolutional Neural Network (CNN) based regression model is trained on a large sample of galaxies with reliable decomposition into the bulge and disc components. The existing approaches to estimate the B/T ratio use galaxy light-profile modelling to find the best fit. This method is computationally expensive, prohibitively so for large samples of galaxies, and requires a significant amount of human intervention. Machine learning models have the potential to overcome these shortcomings. In our CNN model, for a test set of 20 000 galaxies, 85.7 per cent of the predicted B/T values have absolute error (AE) less than 0.1. We see further improvement to 87.5 per cent if, while testing, we only consider brighter galaxies (with r-band apparent magnitude <17) with no bright neighbours. Our model estimates the B/T ratio for the 20 000 test galaxies in less than a minute. This is a significant improvement in inference time from the conventional fitting pipelines, which manage around 2–3 estimates per minute. Thus, the proposed machine learning approach could potentially save a tremendous amount of time, effort, and computational resources while predicting B/T reliably, particularly in the era of next-generation sky surveys such as the Legacy Survey of Space and Time (LSST) and the Euclid sky survey which will produce extremely large samples of galaxies.

Grover, Harsh (ORCID:0000000321338142)↗

GLOBAL MODELING OF NEBULAE WITH PARTICLE GROWTH, DRIFT, AND EVAPORATION FRONTS. I. METHODOLOGY AND TYPICAL RESULTS

We model particle growth in a turbulent, viscously evolving protoplanetary nebula, incorporating sticking, bouncing, fragmentation, and mass transfer at high speeds. We treat small particles using a moments method and large particles using a traditional histogram binning, including a probability distribution function of collisional velocities. The fragmentation strength of the particles depends on their composition (icy aggregates are stronger than silicate aggregates). The particle opacity, which controls the nebula thermal structure, evolves as particles grow and mass redistributes. While growing, particles drift radially due to nebula headwind drag. Particles of different compositions evaporate at “evaporation fronts” (EFs) where the midplane temperature exceeds their respective evaporation temperatures. We track the vapor and solid phases of each component, accounting for advection and radial and vertical diffusion. We present characteristic results in evolutions lasting 2 × 10{sup 5} years. In general, (1) mass is transferred from the outer to the inner nebula in significant amounts, creating radial concentrations of solids at EFs; (2) particle sizes are limited by a combination of fragmentation, bouncing, and drift; (3) “lucky” large particles never represent a significant amount of mass; and (4) restricted radial zones just outside each EF become compositionally enriched in the associated volatiles. We point out implications for millimeter to submillimeter SEDs and the inference of nebula mass, radial banding, the role of opacity on new mechanisms for generating turbulence, the enrichment of meteorites in heavy oxygen isotopes, variable and nonsolar redox conditions, the primary accretion of silicate and icy planetesimals, and the makeup of Jupiter’s core.

79 ASTRONOMY AND ASTROPHYSICS↗

Interregional Renewable Energy Zones

Interregional Renewable Energy Zones (IREZs) are a component of the National Transmission Planning Study (NTPS), which analyzes strategies for building out transmission infrastructure to support decarbonizing the electricity sector by 2035. In particular, IREZs envision long-distance transmission corridors for moving large amounts of low-cost renewable energy. An IREZ is a transmission collection point that is easily accessible to a very high volume of low-cost developable wind and solar energy potential. This dataset includes 155 IREZs identified across the continental United States where each IREZ is characterized by its primary and secondary resource.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Major and trace element chemistry of separated fragments from a hibonite-bearing Allende inclusion

The major and trace elements of separated fragments and a bulk sample from CG-11, a hibonite-bearing inclusion in the Allende meteorite, were analyzed. Major element abundances were used to determine the minerology of separated fragments. The high degree of correlation between Eu/Sm ratios and Lu/Yb ratios for the samples studied indicates that their rare earth element (REE) distributions are governed by two components. One, Lu-, Eu-rich, is probably hibonite; the other, depleted in these elements, seems to be associated with the secondary alteration phases, grossular, nepheline and anorthite. The REE distribution in CG-11 precludes melting events after formation of the secondary alteration phases, but a melting event involving the primary minerals cannot be excluded. The enrichment of Lu with respect to other measured REE in hibonite can be explained by present REE condensation models. Two Hf-bearing components, most likely hibonite and perovskite, are necessary to account for variations in Sc/Hf ratios in the fragments studied. The lithophile volatiles Na, Mn, Fe, Zn, and probably Cr increase in the same order as the amount of secondary alteration minerals; the volatile siderophile elements Co and Au, however, do not.

Davis, A. M.↗

Acoustic modal analysis of a full-scale annular combustor

An acoustic modal decomposition of the measured pressure field in a full scale annular combustor installed in a ducted test rig is described. The modal analysis, utilizing a least squares optimization routine, is facilitated by the assumption of randomly occurring pressure disturbances which generate equal amplitude clockwise and counter-clockwise pressure waves, and the assumption of statistical independence between modes. These assumptions are fully justified by the measured cross spectral phases between the various measurement points. The resultant modal decomposition indicates that higher order modes compose the dominant portion of the combustor pressure spectrum in the range of frequencies of interest in core noise studies. A second major finding is that, over the frequency range of interest, each individual mode which is present exists in virtual isolation over significant portions of the spectrum. Finally, a comparison between the present results and a limited amount of data obtained in an operating turbofan engine with the same combustor is made. The comparison is sufficiently favorable to warrant the conclusion that the structure of the combustor pressure field is preserved between the component facility and the engine.

Karchmer, A. M.↗

Acoustic modal analysis of a full-scale annular combustor

An acoustic modal decomposition of the measured pressure field in a full scale annular combustor installed in a ducted test rig is described. The modal analysis, utilizing a least squares optimization routine, is facilitated by the assumption of randomly occurring pressure disturbances which generate equal amplitude clockwise and counter-clockwise pressure waves, and the assumption of statistical independence between modes. These assumptions are fully justified by the measured cross spectral phases between the various measurement points. The resultant modal decomposition indicates that higher order modes compose the dominant portion of the combustor pressure spectrum in the range of frequencies of interest in core noise studies. A second major finding is that, over the frequency range of interest, each individual mode which is present exists in virtual isolation over significant portions of the spectrum. Finally, a comparison between the present results and a limited amount of data obtained in an operating turbofan engine with the same combustor is made. The comparison is sufficiently favorable to warrant the conclusion that the structure of the combustor pressure field is preserved between the component facility and the engine. Previously announced in STAR as N83-21896

Karchmer, A. M.↗