Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Comprehensive silicon solar-cell computer modeling

A comprehensive silicon solar cell computer modeling scheme was developed to perform the following tasks: (1) model and analysis of the net charge distribution in quasineutral regions; (2) experimentally determined temperature behavior of Spire Corp. n+pp+ solar cells where n+-emitter is formed by ion implantation of 75As or 31P; and (3) initial validation results of computer simulation program using Spire Corp. n+pp+ cells.

Lamorte, M. F.↗

Fatigue crack layer propagation in silicon-iron

Fatigue crack propagation in metal is almost always accompanied by plastic deformation unless conditions strongly favor brittle fracture. The analysis of the plastic zone is crucial to the understanding of crack propagation behavior as it governs the crack growth kinetics. This research was undertaken to study the fatigue crack propagation in a silicon iron alloy. Kinetic and plasticity aspects of fatigue crack propagation in the alloy were obtained, including the characterization of damage evolution.

Birol, Y.↗

Dynamic and static fatigue behavior of sintered silicon nitrides

The dynamic and static fatigue behavior of Kyocera SN220M sintered silicon nitride at 1000 C was studied. Fractographic analysis of the material failing in dynamic fatigue revealed the presence of slow crack growth (SCG) at stressing rates below 41 MPa/min. Under conditions of static fatigue this material also displayed SCG at stresses below 345 MPa. SCG appears to be controlled by microcracking of the grain boundaries. The crack velocity exponent (n) determined from both dynamic and static fatigue tests ranged from 11 to 16.

Chang, J.↗

Model-independent constraints on possible modifications of Newtonian gravity

New model-independent constraints on possible modifications of Newtonian gravity over solar-system distance scales are presented, and their implications discussed. The constraints arise from the analysis of various planetary astrometric data sets. The results of the model-independent analysis are then applied to set limits on a variation in the l/r-squared behavior of gravity, on possible Yukawa-type interactions with ranges of the order of planetary distance scales, and on a deviation from Newtonian gravity of the type discussed by Milgrom (1983).

Talmadge, C.↗

Antenna pattern study

Prediction of antenna radiation patterns has long been an important function in the design of command, communication, and tracking systems for rocket vehicles and spacecraft. An acceptable degree of assurance that a radio link will provide the required quality of data or certainty of correct command execution must be acquired by some means if the system is to be certified as reliable. Two methods have been used to perform this function: (1) Theoretical analysis, based on the known properties of basic antenna element types and their behavior in the presence of conductive structures of simple shape, and (2) Measurement of the patterns on scale models of the spacecraft or rocket vehicle on which the antenna is located. Both of these methods are ordinarily employed in the antenna design process.

Harper, Warren↗

Stochastic acceleration of cometary pickup ions - The classic leaky box model

The acceleration of cometary pickup ions by magnetohydrodynamic waves at P/Giacobini-Zinner is examined in a model where acceleration predominantly occurs downstream of the bow shock throughout the cometosheath where intense magnetic turbulence exists. The mean free path for scattering by the magnetic fluctuations in this region is less than the characteristic dimension of the cometosheath so that pickup ions are rendered isotropic and energized by a modest amount in the process. This principal loss mechanism for the ions is spatial diffusion out of the acceleration region moderated by the self-same accelerating waves. This particular feature constrains the model in a way that the predicted ion spectrum is uniquely determined by the power spectrum of the magnetic turbulence. At both P/Giacobini-Zinner and P/Halley, the turbulence is non-Kolmogoroff with a spectral index of 2 resulting in an ion spectral behavior that is approximately an exponential in ion speed, consistent with a recent analysis of the Giacobini-Zinner data (see Richardson et al.).

Barbosa, D. D.↗

Computer Simulation For Multilevel Optimization Of Design

New simulator for multilevel optimization of complex hierarchical systems reduces cost of analysis in experimentation with multilevel design-optimization algorithms. Computer program mimics qualitative behavior and data couplings that occur among subsystems of complex engineering system, such as car, aircraft, or building. Eliminates engineering analyses in subsystems by replacing them with judiciously-chosen analytical functions. Serves as tool for development of strategy for multilevel optimization of design.

Padula, Sharon L.↗

Infrared reflectance measurements of the insulator-metal transition in solid hydrogen

Reflectance measurements on solid hydrogen to 177 GPa (1.77 Mbar) have been performed from near-infrared to ultraviolet wavelengths (0.5 to 3 eV). Above 150 GPa characteristic free-electron behavior in the infrared region is observed to increase sharply with increasing pressure. Analysis of volume dependence of the plasma frequency obtained from Drude-model fits to the spectra indicates that the pressure of the insulator-metal transition is 149 (+ or - 10) GPa at 295 K. The measurements are consistent with metallization by closure of an indirect gap in the molecular solid.

Mao, H. K.↗

Unsteady surface pressure measurements on a slender delta wing undergoing limit cycle wing rock

An experimental investigation of slender wing limit cycle motion known as wing rock was investigated using two unique experimental systems. Dynamic roll moment measurements and visualization data on the leading edge vortices were obtained using a free to roll apparatus that incorporates an airbearing spindle. In addition, both static and unsteady surface pressure data was measured on the top and bottom surfaces of the model. To obtain the unsteady surface pressure data a new computer controller drive system was developed to accurately reproduce the free to roll time history motions. The data from these experiments include, roll angle time histories, vortex trajectory data on the position of the vortices relative to the model's surface, and surface pressure measurements as a function of roll angle when the model is stationary or undergoing a wing rock motion. The roll time history data was numerically differentiated to determine the dynamic roll moment coefficient. An analysis of these data revealed that the primary mechanism for the limit cycle behavior was a time lag in the position of the vortices normal to the wing surface.

Arena, Andrew S., Jr.↗

Markov reward processes

Numerous applications in the area of computer system analysis can be effectively studied with Markov reward models. These models describe the behavior of the system with a continuous-time Markov chain, where a reward rate is associated with each state. In a reliability/availability model, upstates may have reward rate 1 and down states may have reward rate zero associated with them. In a queueing model, the number of jobs of certain type in a given state may be the reward rate attached to that state. In a combined model of performance and reliability, the reward rate of a state may be the computational capacity, or a related performance measure. Expected steady-state reward rate and expected instantaneous reward rate are clearly useful measures of the Markov reward model. More generally, the distribution of accumulated reward or time-averaged reward over a finite time interval may be determined from the solution of the Markov reward model. This information is of great practical significance in situations where the workload can be well characterized (deterministically, or by continuous functions e.g., distributions). The design process in the development of a computer system is an expensive and long term endeavor. For aerospace applications the reliability of the computer system is essential, as is the ability to complete critical workloads in a well defined real time interval. Consequently, effective modeling of such systems must take into account both performance and reliability. This fact motivates our use of Markov reward models to aid in the development and evaluation of fault tolerant computer systems.

Smith, R. M.↗

Fatigue and flexural response of advanced carbon-carbon composites at room and elevated temperatures

The flexural response of SiC-coated carbon-carbon composites (ACC-4) at room and elevated temperatures is presented. Three-point bending tests were performed on virgin and mission-cycled specimens, and the variation in flexural strength is examined. The load-deflection behavior of the material at various temperatures is investigated, and the Weibull (1939) analysis of the strength data is performed. Micrographs of various cross sections in the damaged zone were taken, and the failure mechanisms are discussed. Fatigue tests were conducted under flexural loads, and the S-N diagram with the corresponding Weibull analysis are presented. Untested as well as fractured specimens under static and dynamic loading were C-scanned to identify the damaged zone and visualize the extent of the damage. Failure analyses are presented for both static and cyclic loading on the basis of NDE, the micrographs, and the experimental data.

Mahfuz, Hassan↗

A digitally implemented modem - Theory and emulation results

Theory and hardware emulation results are presented for a very flexible digitally implemented modem whose technology is useful over a broad class of terrestrial and in-flight satellite communications applications. The interdependent detection and tracking loop architectures based on the 'joint estimator-detector' approach is shown to perform well for various modulation techniques. The analysis is accurate in setting the loop parameters, and also predicting their transient behavior.

Poklemba, John J.↗

Modelling chaotic vibrations using NASTRAN

Due to the unavailability and, later, prohibitive cost of the computational power required, many phenomena in nonlinear dynamic systems have in the past been addressed in terms of linear systems. Linear systems respond to periodic inputs with periodic outputs, and may be characterized in the time domain or in the frequency domain as convenient. Reduction to the frequency domain is frequently desireable to reduce the amount of computation required for solution. Nonlinear systems are only soluble in the time domain, and may exhibit a time history which is extremely sensitive to initial conditions. Such systems are termed chaotic. Dynamic buckling, aeroelasticity, fatigue analysis, control systems and electromechanical actuators are among the areas where chaotic vibrations have been observed. Direct transient analysis over a long time period presents a ready means of simulating the behavior of self-excited or externally excited nonlinear systems for a range of experimental parameters, either to characterize chaotic behavior for development of load spectra, or to define its envelope and preclude its occurrence.

Sheerer, T. J.↗

Radial evolution of the solar wind turbulence with application to charged particle transport

The proposed research efforts funded by the Pioneer-Venus Guest Investigator Grant to the Bartol Research Institute center on a study of the radial and temporal variation of the large-scale interplanetary magnetic field (IMF) and include a study of the radial variation of the observed north-south asymmetry of the IMF spiral based on the previous results of Bieber (1988). The preliminary results of Bieber demonstrated that at Earth orbit there exists an asymmetry between the yearly average winding angles of toward and away sector fields that can be as large as 10 degrees. The Bieber (1988) analysis employed the NSSDC omnitape data set of 1 AU measurements. When the observed asymmetry is related to the state of the solar magnetic dipole, it is possible to conclude that the IMF north of the heliospheric current sheet is more tightly wound than the IMF spiral south of the current sheet. The average difference in the winding angle as measured over a 21 year period spanning 1965 through 1985 was 3.1 degrees + 1.1 degrees. The Bieber analysis was able to rule-out several possible sources for the observed behavior including a possible asymmetry in the solar wind speed or the observed hemispherical dependence of solar rotation. The object of this research was to extend this previous result to include observations within the inner and outer heliosphere, to examine the radial dependence of the reported asymmetry, and to better resolve the possible source of the observations. The Pioneer-Venus Orbiter has proven to be the perfect monitor for the inner heliospheric observations. It has provided 9 years of continuous observations at a fixed heliocentric distance (except for those periods when the spacecraft was within the region of space where the magnetic field is influenced by the presence of the planet). Comparisons between the 1 AU observations recorded on the NSSDC omnitape and the 0.7 AU observations of the Pioneer-Venus Orbiter have greatly improved our understanding of the IMF winding angle asymmetry. Further comparison with outer heliospheric measurements have proven interesting, although less conclusive.

Smith, Charles W.↗

On the Finite Element Implementation of the Generalized Method of Cells Micromechanics Constitutive Model

The Generalized Method of Cells (GMC), a micromechanics based constitutive model, is implemented into the finite element code MARC using the user subroutine HYPELA. Comparisons in terms of transverse deformation response, micro stress and strain distributions, and required CPU time are presented for GMC and finite element models of fiber/matrix unit cell. GMC is shown to provide comparable predictions of the composite behavior and requires significantly less CPU time as compared to a finite element analysis of the unit cell. Details as to the organization of the HYPELA code are provided with the actual HYPELA code included in the appendix.

Wilt, T. E.↗

Micro-mechanics of micro-composites

The Structural Dynamics branch at NASA LaRC is working on developing an active passive mount system for vibration control. Toward this end a system utilizing piezoelectric actuators is currently being utilized. There are limitations to the current system related to space applications under which it is desired to eliminate deformations in the actuators associated with thermal effects. In addition, a material that is readily formable into complex shapes and whose mechanical properties can be optimized with regards to vibration control would be highly desirable. Microcomposite material are currently under study to service these needs. Microcomposite materials are essentially materials in which particles on the scale of microns are bound together with a polyimide (LaRC Si) that has been developed at LaRC. In particular a micro-composite consisting of LaRC Si binder and piezoelectric ceramic particles shows promise in satisfying the needs of the active passive mount project. The LaRC/ Si microcomposite has a unique combination of piezoelectric properties combined with a near zero coefficient of thermal expansion and easy machinability. The goal of this ASEE project is to develop techniques to analytically determine important material properties necessary to characterize the dynamic properties of actuators and mounts made from the LaRC Si / ceramic microcomposite. In particular, a generalized method of cells micromechanics originally developed at NASA Lewis is employed to analyze the microstructural geometry of the microcomposites and predict the overall mechanical properties of the material. A testing program has been established to evaluate and refine the GMC approach to these materials. In addition, a theory of mixtures analysis is being developed that utilizes the GMC micromechanics information to analyze complex behavior of the microcomposite material which has a near zero CTE.

Donovan, Richard P.↗

Hard X-Ray Emission of X-Ray Bursters

The main results from this investigation were serendipitous. The long observation approved for the study of the hard X-ray emission of X-ray bursters lead, instead, to one of the largest early samples of the behavior of fast quasi-periodic oscillations (QPOS) in an atoll sources. Our analysis of this data set lead to the several important discoveries including the existence of a robust correlation between QPO frequency and the flux of a soft blackbody component of the X-ray spectrum in the atoll source 4U 0614+091.

Kaaret, Phillip↗

Coincident POLAR/UVI and WIND Observations of Pseudobreakups

Using POLAR/UVI global images, we have identified a period of successive minor auroral activations during which WIND was making a perigee pass (X approx. - 11Re). These auroral brightenings are interpreted to be pseudobreakups due to the lack of global expansion. Large magnetic field fluctuations and high earthward ion velocity moments measured by the WIND spacecraft show a nearly one-to-one correspondence with the auroral intensifications. Analysis of the plasma parameters indicates that there is no difference in the behavior of the plasma during pseudobreakups as compared to substorm expansive phase onset. Inspection of the ion distribution functions during high velocity moment events reveals the presence of a two component plasma. The particles contributing to the large mean velocities are energetic ions from approx. 2-27 keV. We conclude that pseudobreakups are the ionospheric signature of high velocity moment events.

Fillingim, M. O.↗