Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced Vehicles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Single stage, low noise, advanced technology fan. Volume 2: Structural design

The structural design for a half-scale fan vehicle, which would have application on an advanced transport aircraft, is described. The single stage advanced technology fan was designed to a pressure ratio of 1.8 at a tip speed of 503 m/sec (1,650 ft/sec). This mechanical design report describes the fan rotor design and the design of various structures of the vehicle; eg, stators, casings, splitters, seals, adapters, etc.

Schoener, J. L.↗

Single stage, low noise, advanced technology fan. Volume 1: Aerodynamic design

The aerodynamic design for a half-scale fan vehicle, which would have application on an advanced transport aircraft, is described. The single stage advanced technology fan was designed to a pressure ratio of 1.8 at a tip speed of 503 m/sec 11,650 ft/sec). The fan and booster components are designed in a scale model flow size convenient for testing with existing facility and vehicle hardware. The design corrected flow per unit annulus area at the fan face is 215 kg/sec sq m (44.0 lb m/sec sq ft) with a hub-tip ratio of 0.38 at the leading edge of the fan rotor. This results in an inlet corrected airflow of 117.9 kg/sec (259.9 lb m/sec) for the selected rotor tip diameter if 90.37 cm (35.58 in.). The variable geometry inlet is designed utilizing a combination of high throat Mach number and acoustic treatment in the inlet diffuser for noise suppression (hybrid inlet). A variable fan exhaust nozzle was assumed in conjunction with the variable inlet throat area to limit the required area change of the inlet throat at approach and hence limit the overall diffusion and inlet length. The fan exit duct design was primarily influenced by acoustic requirements, including length of suppressor wall treatment; length, thickness and position on a duct splitter for additional suppressor treatment; and duct surface Mach numbers.

Sullivan, T. J.↗

The cost of unreliability in the avionics suite of a launch vehicle

The main objective of the Advanced Launch System (ALS) program is to realize a substantial reduction in recurring launch costs over present launch systems. A methodology is presented for assessing the impact of the reliability of the avionics suite on the recurring launch cost of the ALS. The methodology is illustrated by focusing on two architectures. The first is a distillation of a typical architecture for this type of application. The second is a simplified implementation of the Advanced Information Processing System (AIPS) technology developed at the Charles Stark Draper Laboratory, Inc. Both architectures utilize redundancy of hardware to tolerate faults. the key contributors to the cost of unreliability are identified and modeled utilizing Markov modeling techniques for each of the two architectures. The results are presented along with the more traditional costs for these avionics suites.

Rosch, Gene↗

Application of pneumatic lift and control surface technology to advanced transport aircraft

The application of pneumatic (blown) aerodynamic technology to both the lifting and the control surfaces of advanced transport aircraft can provide revolutionary changes in the performance and operation of these vehicles, ranging in speed regime from Advanced Subsonic Transports to the High Speed Civil Transport, and beyond. This technology, much of it based on the Circulation Control Wing blown concepts, can provide aerodynamic force augmentations of 80 to 100 (i.e., return of 80-100 pounds of force per pound of input momentum from the blowing jet). This can be achieved without use of external mechanical surfaces. Clever application of this technology can provide no-moving-part lifting surfaces (wings/tails) integrated into the control system to greatly simplify aircraft designs while improving their aerodynamic performance. Lift/drag ratio may be pneumatically tailored to fit the current phase of the flight, and takeoff/landing performance can be greatly improved by reducing ground roll distances and liftoff/touchdown speeds. Alternatively, great increases in liftoff weights and payloads are possible, as are great reductions in wing and tail planform size, resulting in optimized cruise wing designs. Furthermore, lift generation independent of angle of attack provides much promise for increased safety of flight in the severe updrafts/downdrafts of microbursts and windshears, which is further augmented by the ability to sustain flight at greatly reduced airspeeds. Load-tailored blown wings can also reduce tip vorticity during highlift operations and the resulting vortex wake hazards near terminal areas. Reduced noise may also be possible as these jets can be made to operate at low pressures. The planned presentation will support the above statements through discussions of recent experimental and numerical (CFD) research and development of these advanced blown aerodynamic surfaces, portions of which have been conducted for NASA. Also to be presented will be predicted performance of advanced transports resulting from these devices. Suggestions will be presented for additional innovative high-payoff research leading to further confirmation of these concepts and their application to advanced efficient commercial transport aircraft.

Englar, Robert J.↗

In-Use Fleet Evaluation of Fast-Charge Battery Electric Transit Buses

With support from the U.S. Department of Energy's Vehicle Technologies Office, the National Renewable Energy Laboratory (NREL) conducts real-world performance evaluations of advanced medium- and heavy-duty fleet vehicles. Evaluation results can help vehicle manufacturers fine-tune their designs and assist fleet managers in selecting fuel-efficient, low-emission vehicles that meet their economic and operational goals. In 2015, NREL launched an in-service evaluation of 12 battery electric buses (BEBs) compared to conventional compressed natural gas (CNG) buses operated by Foothill Transit in West Covina, California. The study aims to improve understanding of the overall usage and effectiveness of fast-charge BEBs and associated charging infrastructure in transit operation. To date, NREL researchers have analyzed more than 148,000 km of in-use operational data, including driving and charging events. Foothill Transit purchased the BEBs with grant funding from the Federal Transit Administration's Transit Investments for Greenhouse Gas and Energy Reduction Program.

33 ADVANCED PROPULSION SYSTEMS↗

Automated Vehicle Regulation: An Energy and Emissions Perspective

This presentation provides a summary of the current automated vehicles polices in the United States and how they related to reducing greenhouse gas (GHG) emissions. The presentation then looks at future automated vehicle trends that will increase and reduce GHG emissions and what current policies utilized in other areas of law could be adapted for automated vehicle GHG emissions.

33 ADVANCED PROPULSION SYSTEMS↗

Electric-Drive Vehicles

Electric-drive vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: Hybrid electric vehicles (HEVs), Plug-in hybrid electric vehicles (PHEVs), All-electric vehicles (EVs). Together, PHEVs and EVs can also be referred to as plug-in electric vehicles (PEVs).

33 ADVANCED PROPULSION SYSTEMS↗

Electric Vehicles for Fleets

Electric vehicles (EVs) can fulfill many daily driving needs, making them a great solution for fleets. They offer several benefits and can fill roles in light-duty, medium-/heavy-duty (MD/HD), and even off-road applications. The unique fleet environment presents considerations beyond those that consumers must address before going electric. For example, fleet managers must understand the impacts of charging multiple vehicles while maintaining fleet operations. Larger MD/HD vehicles bring additional factors to consider.

ADVANCED PROPULSION SYSTEMS↗

Personal Rotorcraft Design and Performance with Electric Hybridization

Recent and projected improvements for more or all-electric aviation propulsion systems can enable greater personal mobility, while also reducing environmental impact (noise and emissions). However, all-electric energy storage capability is significantly less than present, hydrocarbon-fueled systems. A system study was performed exploring design and performance assuming hybrid propulsion ranging from traditional hydrocarbon-fueled cycles (gasoline Otto and diesel) to all-electric systems using electric motors generators, with batteries for energy storage and load leveling. Study vehicles were a conventional, single-main rotor (SMR) helicopter and an advanced vertical takeoff and landing (VTOL) aircraft. Vehicle capability was limited to two or three people (including pilot or crew); the design range for the VTOL aircraft was set to 150 miles (about one hour total flight). Search and rescue (SAR), loiter, and cruise-dominated missions were chosen to illustrate each vehicle and degree of hybrid propulsion strengths and weaknesses. The traditional, SMR helicopter is a hover-optimized design; electric hybridization was performed assuming a parallel hybrid approach by varying degree of hybridization. Many of the helicopter hybrid propulsion combinations have some mission capabilities that might be effective for short range or on-demand mobility missions. However, even for 30 year technology electrical components, all hybrid propulsion systems studied result in less available fuel, lower maximum range, and reduced hover and loiter duration than the baseline vehicle. Results for the VTOL aircraft were more encouraging. Series hybrid combinations reflective of near-term systems could improve range and loiter duration by 30. Advanced, higher performing series hybrid combinations could double or almost triple the VTOL aircrafts range and loiter duration. Additional details on the study assumptions and work performed are given, as well as suggestions for future study effort.

electric motors↗

Assessing Performance of Radar and Visual Sensing Techniques for Ground-To-Air Surveillance in Advanced Air Mobility

The safe integration of Unmanned Aircraft Vehicles (UAV) within the civil airspace is of great interest to NASA’s Advanced Air Mobility project, which envisions high density of operations in and around urban areas that include both UAV and AAM aircraft. To enable safe autonomous operations of both platforms, reliable airspace surveillance strategies must be designed and experimentally validated in relevant scenarios, where multiple small UAV operate flying in low altitude conditions. An example of such a scenario is described in this paper which provides performance assessment of various sensing strategies experimentally tested during flight campaigns with four UAV completing simultaneous missions from vertiports. Such campaigns are performed by the High Density Vertiplex subproject which assesses a prototype of Urban Air Mobility ecosystem. For the purposes of this work, the flights are observed from multiple sensing nodes each with radar and camera sensors. The visual detection and tracking algorithms achieved 96.1% to 99.9% average tracking coverage of the UAV above the horizon, reaching detection ranges larger than 1 kilometer for octocopter. Radar-based tracking shows a lower coverage mainly due to ground clutter removal challenges but provides comparable detection ranges and meter-level range accuracy.

Federica Vitiello↗

Advanced space transportation systems

Projected growth in space transportation capabilities beyond the initial Space Shuttle is discussed in terms of earth-to-low-orbit launch vehicles as well as transportation beyond low orbit (orbit transfer vehicles). Growth versions of the Shuttle and heavy-lift derivatives of the Shuttle are shown conceptually. More advanced launch vehicle concepts are also shown, based on rocket propulsion or combinations of rocket and air-breathing propulsion. Orbit transfer vehicle concepts for personnel transport and for cargo transport are discussed, including chemical rocket as well as electric propulsion. Finally, target levels of capability and efficiencies for later time periods are discussed and compared with the prospective vehicle concepts mentioned earlier.

Disher, J. H.↗

FY2017 Electrification Annual Progress Report

During fiscal year 2017 (FY 2017), the U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) funded early stage research & development (R&D) projects that address Batteries and Electrification of the U.S. transportation sector. The VTO Electrification Sub-Program is composed of Electric Drive Technologies, and Grid Integration activities. The Electric Drive Technologies group conducts R&D projects that advance Electric Motors and Power Electronics technologies. The Grid and Charging Infrastructure group conducts R&D projects that advance Grid Modernization and Electric Vehicle Charging technologies. This document presents a brief overview of the Electrification Sub-Program and progress reports for its R&D projects. Each of the progress reports provide a project overview and highlights of the technical results that were accomplished in FY 2017.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Extracting Vehicle Trajectories from Partially Overlapping Roadside Radar

This work presents a methodology for extracting vehicle trajectories from six partially-overlapping roadside radars through a signalized corridor. The methodology incorporates radar calibration, transformation to the Frenet space, Kalman filtering, short-term prediction, lane-classification, trajectory association, and a covariance intersection-based approach to track fusion. The resulting dataset contains 79,000 fused radar trajectories over a 26-h period, capturing diverse driving scenarios including signalized intersections, merging behavior, and a wide range of speeds. Compared to popular trajectory datasets such as NGSIM and highD, this dataset offers extended temporal coverage, a large number of vehicles, and varied driving conditions. The filtered leader–follower pairs from the dataset provide a substantial number of trajectories suitable for car-following model calibration. The framework and dataset presented in this work has the potential to be leveraged broadly in the study of advanced traffic management systems, autonomous vehicle decision-making, and traffic research.

33 ADVANCED PROPULSION SYSTEMS↗

Enhanced Flight Dynamics Models with Aerodynamic Interference for Real-Time Simulation of VTOL Concept Vehicles

In an effort to establish common models to support the Advanced Air Mobility (AAM) community, NASA has designed a fleet of VTOL configuration reference models. Advanced Rotorcraft Technologies (ART) in cooperation with the NASA Ames Aeromechanics branch has developed FLIGHTLAB simulation models for several of these AAM VTOL concept vehicles. These simulation models are real-time capable while maintaining accurate flight dynamic characteristics with enhanced interference simulation by extracting important modeling parameters from Viscous Vortex Particle Method (VVPM). The focus of this paper is threefold. First, it introduces the simulation models developed and describes their modeling characteristics important to control and flight dynamics simulation. Second, the method for deriving the interference coefficients between model components such as rotors and wings is outlined. Implementation of the method for the lift+cruise and tiltwing models are discussed in detail. Third, the accuracy of the interference enhancement is assessed, with emphasis placed on the impacts to trim and flight dynamic characteristics. The interference enhancement method is further used to evaluate configuration design decisions by quantifying performance aspects of interference. This research effort culminated in simulation models for the AAM VTOL concept vehicles, with proper interference and real-time capability.

Flight Dynamics↗

An Advanced Video Sensor for Automated Docking

This paper describes the current developments in video-based sensors at the Marshall Space Flight Center. The Advanced Video Guidance Sensor is the latest in a line of video-based sensors designed for use in automated docking systems. The X-33, X-34, X-38, and X-40 are all designed to be unpiloted vehicles; such vehicles will require a sensor system that will provide adequate data for the vehicle to accomplish its mission. One of the primary tasks planned for re-usable launch vehicles is to resupply the space station. In order to approach the space station in a self-guided manner, the vehicle must have a reliable and accurate sensor system to provide relative position and attitude information between the vehicle and the space station. The Advanced Video Guidance Sensor is being designed and built to meet this requirement, as well as requirements for other vehicles docking to a variety of target spacecraft. The Advanced Video Guidance Sensor is being designed to allow range and bearing information to be measured at ranges up to 2 km. The sensor will measure 6-degree-of-freedom information (relative positions and attitudes) from approximately 40 meters all the way in to final contact (approximately 1 meter range). The sensor will have a data output rate of 20 Hz during tracking mode, and will be able to acquire a target within one half of a second. The prototype of the sensor will be near completion at the time of the conference.

Howard, Richard T.↗