Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Synthesis, photoluminescence and magnetic properties of barium vanadate nanoflowers

Graphical abstract: The flower-shaped barium vanadate was obtained for the first time. The photoluminescence and magnetic properties of the barium vanadate nanoflowers were investigated at room temperature. Research highlights: {yields} In the paper, the flower-shaped barium vanadate were obtained for the first time. The CHM method used here is new and simple for preparation of barium vanadate. {yields} The photoluminescence and magnetic properties of the barium vanadate nanoflowers were investigated at room temperature. The strong bluish-green emission was observed. {yields} The ferromagnetic behavior of the barium vanadate nanoflowers was found with saturation magnetization of about 83.50 x 10{sup -3} emu/g, coercivity of 18.89 Oe and remnant magnetization of 4.63 x 10{sup -3} emu/g. {yields} The mechanisms of PL and magnetic property of barium vanadate nanoflowers have been discussed. -- Abstract: The flower-shaped barium vanadate has been obtained by the composite hydroxide mediated (CHM) method from V{sub 2}O{sub 5} and BaCl{sub 2} at 200 {sup o}C for 13 h. XRD and XPS spectrum of the as-synthesized sample indicate it is hexagonal Ba{sub 3}V{sub 2}O{sub 8} with small amount of Ba{sub 3}VO{sub 4.8} coexistence. Scan electron microscope and transmission electron microscope display that the flower-shaped crystals are composed of nanosheets with thickness of {approx}20 nm. The UV-visible spectrum shows that the barium vanadate sample has two optical gaps (3.85 eV and 3.12 eV). Photoluminescence spectrum of the barium vanadate flowers exhibits a visible light emission centered at 492 and 525 nm which might be attributed to VO{sub 4} tetrahedron with T{sub d} symmetry in Ba{sub 3}V{sub 2}O{sub 8}. The ferromagnetic behavior of the barium vanadate nanoflowers has been found with saturation magnetization of about 83.50 x 10{sup -3} emu/g, coercivity of 18.89 Oe and remnant magnetization of 4.63 x 10{sup -3} emu/g, which is mainly due to the presence of a non-orthovanadate phase with spin S = 1/2.

36 MATERIALS SCIENCE↗

Cadmium-catalyzed surface growth of single-walled carbon nanotubes with high efficiency

Graphical abstract: The Cd nanocatalysts, prepared using a diblock copolymer templating method, were uniformly spaced over a large deposition area with an average diameter of 1.9 nm and narrow size distribution. By using the normal-heating method, high density SWNTs can be generated. Research highlights: {yields} We demonstrate that cadmium (Cd) can catalyze the growth of SWNTs with high efficiency. {yields} The PVP capped-Cd nanocatalysts were uniformly spaced over a large deposition area with an average diameter of 1.9 nm. {yields} By using the normal-heating and fast-heating method, random and horizontally aligned arrays of SWNTs can be generated. {yields} The high percentage of SWNTs with Ag deposition from Cd indicates that the SWNTs have better conductivity and structural uniformity. -- Abstract: We demonstrate that cadmium (Cd) can catalyze the growth of single-walled carbon nanotubes (SWNTs) with high efficiency. The Cd nanocatalysts, prepared using a diblock copolymer templating method, were uniformly spaced over a large deposition area with an average diameter of 1.9 nm and narrow size distribution. By using the normal-heating and fast-heating method, random and horizontally aligned arrays of SWNTs can be generated. The density of the SWNTs can be altered by the chemical vapor deposition conditions. The morphology and microstructure of the SWNTs characterized by scanning electron microscopy, Raman spectroscopy, atomic force microscopy, and high-resolution transmission electron microscopy revealed that the grown nanotubes do not have carbonaceous particles and have good crystallinity. In addition, after careful check with superlong nanotubes 735 out of 790 nanotubes were found to be deposited with Ag (93%) and only 7% SWNTs without Ag deposition. While for superlong SWNT arrays from Fe, 32% long SWNTs without Ag deposition was found, the high percentage of SWNTs with Ag deposition from Cd indicates that the SWNTs have better conductivity and better structural uniformity with less defects.

36 MATERIALS SCIENCE↗

Single crystal growth and structure refinements of CsM{sub x}Te{sub 2-x}O{sub 6} (M = Al, Ga, Ge, In) pyrochlores

Graphical abstract: Single crystals of CsM{sub x}Te{sub 2-x}O{sub 6} pyrochlores with M = Al, Ga, Ge, and In have been grown and structure refinements indicate deviations from ideal stoichiometry presumably related to mixed valency of tellurium. Highlights: {yields} Single crystals of CsM{sub x}Te{sub 2-x}O{sub 6} pyrochlores with M = Al, Ga, Ge, and In have been grown. {yields} Structure refinements from single crystal X-ray diffraction data confirm e structure. {yields} Deviations from ideal stoichiometry suggest mixed valency of tellurium and hence conductivity. -- Abstract: Single crystals of CsM{sub x}Te{sub 2-x}O{sub 6} pyrochlores with M = Al, Ga, Ge, and In have been grown from a TeO{sub 2} flux. Structure refinements from single crystal X-ray diffraction data are reported. These results are used to discuss deviations from ideal stoichiometry that result in electronic conductivity presumably related to mixed valency of tellurium.

36 MATERIALS SCIENCE↗

Synthesis of Sn-doped ZnO nanorods and their photocatalytic properties

Graphical abstract: Sn-doped ZnO nanorods have been fabricated by a hydrothermal route. Photocatalytic activity of the Sn-doped ZnO samples increases gradually with an increase of the Sn content. Highlights: {yields} Sn-doped ZnO nanorods were fabricated by a hydrothermal route. {yields} Solid-state NMR result confirms Sn{sup 4+} was incorporated into the lattice of ZnO. {yields} The visible luminescence intensity increased with increase in Sn concentration. {yields} Photocatalytic activity of Sn-doped ZnO increases with increasing Sn content. -- Abstract: Sn-doped ZnO nanorods were fabricated by a hydrothermal route, and characterized by X-ray diffraction, field emission scanning electron microscope, UV-vis spectroscopy, Raman spectra, solid-state nuclear magnetic resonance (NMR) spectra, and room temperature photoluminescence spectroscopy. Solid-state NMR result confirms that Sn{sup 4+} was successfully incorporated into the crystal lattice of ZnO. Room temperature photoluminescence showed that all the as-synthesized products exhibited a weak UV emission (380 nm) and a strong visible emission (540 nm), but the intensities of the latter emission increased with increase in Sn concentration. The improvement of visible emission at 540 nm in the Sn-doped ZnO samples was suggested to be a result of the lattice defects increased by doping of Sn in zinc oxide. In addition, the photocatalytic studies indicated that Sn-doped ZnO nanorods are a kind of promising photocatalyst in remediation of water polluted by some chemically stable azo dyes.

36 MATERIALS SCIENCE↗

Microwave hydrothermal synthesis of nanoporous cobalt oxides and their gas sensing properties

Graphical abstract: Photographs taken at the field emission scanning electron microscope of (a) nanosheet-like Co{sub 3}O{sub 4}, (b) nanochain-like Co{sub 3}O{sub 4} and (c) nanoring-like Co{sub 3}O{sub 4}. Highlights: {yields} CO{sub 3}{sup 2-} acts as an inhibitor that affects the growth rates of precursors in different crystal directions. {yields} Nanosheet-like Co{sub 3}O{sub 4}, nanochain-like Co{sub 3}O{sub 4}, and nanoring-like Co{sub 3}O{sub 4} were obtained by microwave hydrothermal process under different precipitants and synthetic conditions. {yields} Specific surface area of nano Co{sub 3}O{sub 4} with various morphologies plays an important role in gas sensitivity to alcohol. -- Abstract: In this paper, the precursors were synthesized by microwave hydrothermal method using Co(NO{sub 3}){sub 2}.6H{sub 2}O as raw material, CO(NH{sub 2}){sub 2} and KOH as precipitants, respectively. The precursors and calcined products were characterized by XRD, FESEM, and BET-BJH. The results show that both constituent and synthetic condition can determine the products morphology. When using KOH as precipitant, hollow Co{sub 3}O{sub 4} nanorings were obtained whose precursor was synthesized at 140 {sup o}C for 3 h and calcined at 500 {sup o}C in air for 2 h. While using CO(NH){sub 2}, Co{sub 3}O{sub 4} like-nanochains were obtained whose precursor was synthesized at 110 {sup o}C for 1 h and calcined at 420 {sup o}C in air for 2 h, and Co{sub 3}O{sub 4} nanosheets were obtained while their precursor was synthesized at 140 {sup o}C for 3 h and calcined at 500 {sup o}C in air for 2 h. The sensitivity test of Co{sub 3}O{sub 4} to alcohol reveals that the hollow Co{sub 3}O{sub 4} nanorings show the best sensitivity, porous Co{sub 3}O{sub 4} like-nanochains are superior to that of the porous nanosheets.

36 MATERIALS SCIENCE↗

High-temperature stability of {alpha}-Ta{sub 4}AlC{sub 3}

Graphical abstract: In this study, stability of {alpha}-Ta{sub 4}AlC{sub 3} is investigated to test a hypothesized thermodynamically driven {alpha}-{beta} phase transformation. It is found that the {alpha} phase is stable up to 1600 {sup o}C, with impurities and point defects most likely increasing the stability of the {alpha}-Ta{sub 4}AlC{sub 3}. Highlights: {yields} Cold-pressed {alpha}-Ta{sub 4}AlC{sub 3} powders are annealed up to 1750 {sup o}C to test first-principles predictions of {alpha}-{beta} phase-stability reversal at 1600 {sup o}C. {yields} The {alpha}-Ta{sub 4}AlC{sub 3} samples are stable up to 1600 {sup o}C, with no indications of any {alpha}-{beta} transformation. {yields} Transmission electron microscopy shows zig-zag stacking sequence characteristic of {alpha}-Ta{sub 4}AlC{sub 3}, as well as tantalum oxide impurities. {yields} The XRD patterns suggest that defects such as vacancies or antisites may increase the stability of {alpha}-Ta{sub 4}AlC{sub 3}. -- Abstract: Cold-pressed {alpha}-Ta4AlC3 powders were annealed up to 1750 {sup o}C to test first-principles predictions of {alpha}-{beta} phase-stability reversal at 1600 {sup o}C. Up to 1600 {sup o}C, the {alpha}-Ta{sub 4}AlC{sub 3} samples were stable with no indications of any {alpha}-{beta} transformation, as shown by the strong characteristic X-ray diffraction peaks of {alpha}-Ta{sub 4}AlC{sub 3} and the zigzag stacking observed by transmission electron microscopy. These results show that, in this experimental situation, high temperature alone is not sufficient to cause the {alpha}-{beta} transformation.

36 MATERIALS SCIENCE↗

Controlled self-assembly of PbS nanoparticles into macrostar-like hierarchical structures

Graphical abstract: The aggregation and rotation of nanoparticles to adopt parallel orientations in three dimensions was indirectly illustrated by TEM and HRTEM images. Highlights: {yields} Macrostar-like PbS hierarchical structures was successfully synthesized by a simple hydrothermal method and mesostars were assembled from the PbS nanocube building blocks with edge lengths of about 100 nm. {yields} Ostwald-ripening-assisted oriented attachment is believed to play a key role in the growth behavior of novel 3D structures. {yields} Optical properties indicating few defects on the surface of the PbS structure and exhibit large blue-shifts compared to bulk PbS. -- Abstract: The synthesis of macrostar-like PbS hierarchical structures by a simple hydrothermal method at 180 {sup o}C for 24 h is proven successful with the assistance of a new surfactant called tetrabutylammonium bromide (TBAB). The as-obtained product is characterized by means of X-ray powder diffraction, field emission scanning electron microscopy, energy dispersive spectrometry, high resolution transmission electron microscopy, and selected area electron diffraction. The presence of TBAB and NaF plays an important role in the formation of PbS macrostructures. Ostwald-ripening-assisted oriented attachment is believed to play a key role in the growth behavior of novel 3D structures. As such, a possible self-assembly mechanism is proposed to explain the formation of the said structures. The present study aims to introduce new insights into understanding the formation process of such unique hierarchical superstructures.

36 MATERIALS SCIENCE↗

Analysis of Er{sup 3+} and Ho{sup 3+} codoped fluoroindate glasses as wide range temperature sensor

Graphical abstract: The sensor sensitivity as a function of the temperature of erbium and holmium doped fluoroindate glasses. A wide temperature range from 20 K to 425 K is covered with a sensitivity larger than 0.0005. Highlights: {yields} The FIR technique has been carried out in fluoroindate glass sample. {yields} The Er doped fluoroindate sample has a maximum sensitivity of 0.0028 K{sup -1} at 425 K. {yields} The Ho doped fluoroindate sample has a maximum sensitivity of 0.0036 K{sup -1} at 59 K. -- Abstract: The fluorescence intensity ratio technique for two fluoroindate glass samples has been carried out. The green emissions at 523 nm and at 545 nm in a 0.1 mol% of Er{sup 3+} doped fluoroindate glass was studied in a wide range of temperature from 125 K to 425 K with a maximum sensitivity of 0.0028 K{sup -1} for 425 K. In a sample doped with 0.1 mol% of Ho{sup 3+} the emissions at 545 nm and at 750 nm were analyzed as a function of temperature from 20 K to 300 K obtaining a maximum sensitivity of 0.0036 K{sup -1} at 59 K. Using both fluoroindate glass samples a wide temperature range from 20 K to 425 K is easily covered pumping with two low-cost diode laser at 406 nm and 473 nm.

36 MATERIALS SCIENCE↗

Photocatalytic hydrogen generation over porous ZnIn{sub 2}S{sub 4} microspheres synthesized via a CPBr-assisted hydrothermal method

Graphical abstract: ZnIn{sub 2}S{sub 4} porous microspheres were synthesized via a cetylpyridinium bromide (CPBr)-assisted hydrothermal method. It could be seen from the SEM image that the flowerlike microspheres were composed of numerous nanosheets. Many slit-like pores were formed among the curved nanosheets. The porous structure benefited the adsorption of reactants, the diffuseness of products, the charge separation on surface, the transfer of the interfacial charge carriers and the charge carrier trapping. And porous ZnIn{sub 2}S{sub 4} photocatalyst exhibited higher photocatalytic activity than nonporous ZnIn{sub 2}S{sub 4} material. Highlights: {yields} A series of unique flower-like porous ZnIn{sub 2}S{sub 4} microspheres of hexagonal crystal phase as efficient visible-light photocatalysts have been synthesized through CPBr-assisted hydrothermal method. {yields} The CPBr addition would visibly influence the self-assemble growing and the crystal structure including the position and intensity of some peaks. {yields} We also found that the pH value plays a crucial role in the formation of ZnIn{sub 2}S{sub 4} porous microspheres and the influence of the pH on the structure of product has been first reported in our paper. {yields} The results showed that our as-synthesized porous ZnIn{sub 2}S{sub 4} microspheres possessed a specific surface area of 165.4 m{sup 2} g{sup -1} and performed higher visible-light photocatalytic activity than bulk ZnIn{sub 2}S{sub 4} for hydrogen evolution. The maximum H{sub 2} evolution rate of ZnIn{sub 2}S{sub 4} reaches 1544.8 {mu}mol/(h g). -- Abstract: Hexagonal ZnIn{sub 2}S{sub 4} porous microspheres were synthesized via a cetylpyridinium bromide (CPBr)-assisted hydrothermal method. The structure, morphology and optical property of these prepared products were characterized by wide angle X-ray diffraction (WAXRD), small angle X-ray diffraction (SAXRD), UV-Vis diffusive reflectance spectroscopy (DRS), field emission scanning electron microscopy (FESEM), energy dispersive X-ray analyzer (EDX) and nitrogen sorption analysis. The effects of CPBr and pH on the crystal structure, morphology and photocatalytic activity of ZnIn{sub 2}S{sub 4} products were studied. The results demonstrated that the flowerlike ZnIn{sub 2}S{sub 4} microspheres, which were composed of numerous nanosheets, performed higher visible-light photocatalytic activity than bulk ZnIn{sub 2}S{sub 4} for hydrogen evolution. The CPBr addition influenced the crystal structure including the position and intensity of some peaks. Furthermore, the pH played a crucial role in the formation of ZnIn{sub 2}S{sub 4} porous microspheres. The as-synthesized porous ZnIn{sub 2}S{sub 4} microspheres possessed the specific surface area of 165.4 m{sup 2} g{sup -1} and the slit-like porous configuration, which was beneficial to photocatalytic reaction.

36 MATERIALS SCIENCE↗

Structure and properties of ternary manganese nitride Mn{sub 3}CuN{sub y} thin films fabricated by facing target magnetron sputtering

Graphical abstract: This figure reveals the dependence of the texture coefficient TC{sub (111)} and TC{sub (200)} of the Mn{sub 3}CuN{sub y} thin films on T{sub sub}. These results indicate that the preferred orientation of the Mn{sub 3}CuN{sub y} thin films dramatically changed from (1 1 1) to (2 0 0) with the increase of T{sub sub}. In one word, the orientation of Mn{sub 3}CuN{sub y} thin film can be tailored by adjusting the magnetron sputtering processing parameters and substrate. It is the first time to report the deposition of Mn{sub 3}CuN{sub y} thin films on single crystal Si (1 0 0) at various substrate temperatures (T{sub sub}) by facing target magnetron sputtering. The influences of substrate temperature on crystal structure and morphology are discussed. The temperature dependences of magnetization, lattice parameters and resistivity for the resulting film are systematically investigated, which shows several different physical properties from those of previous work. Highlights: {yields} Variation of the substrate temperatures adjusted the preferred orientation from (1 1 1) to (2 0 0) of the Mn{sub 3}CuN{sub y} thin films. {yields} There exists a magnetic ordering transition at 225 K from paramagnetic (PM) to ferrimagnetic (FI), which is different than previous results. {yields} It shows a positive thermal expansion behavior with average linear thermal expansion coefficient 2.49 x 10{sup -5} K{sup -1}. However there was no crystal phase transition occurred around the magnetic transition in the film. {yields} The temperature dependence of resistivity displayed a semiconductor-like behavior, which is quite different from the bulk sample. {yields} We believe that our findings may provide an important role to further utilize the potential of antiperovskite manganese nitride film. -- Abstract: Deposition of Mn{sub 3}CuN{sub y} thin films on single crystal Si (1 0 0) at various substrate temperatures (T{sub sub}) by facing target magnetron sputtering is reported. The crystal structure and composition were characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results confirmed that the crystalline antiperovskite Mn{sub 3}CuN{sub y} thin film with (2 0 0) highly preferred texture had been obtained at T{sub sub} = 180 {sup o}C. Furthermore, for the resulting Mn{sub 3}CuN{sub y} thin film, it showed different properties compared with the bulk counterpart. There was a paramagnetic to ferrimagnetic transition at 225 K with decreasing temperature. The change of the lattice constant with temperature presented positive thermal expansion behavior and no structural transition was observed. The average linear thermal expansion coefficient ({alpha}) is 2.49 x 10{sup -5} K{sup -1} from 123 K to 298 K. More interestingly, the temperature dependence of resistivity displayed a semiconductor-like behavior, i.e. an obvious monotonous decrease of resistivity with increasing temperature.

36 MATERIALS SCIENCE↗

Fabrication of Sr- and Co-doped lanthanum chromite interconnectors for SOFC

Graphical abstract: FESEM micrographs of the fresh fracture surfaces for the La{sub 0.80}Sr{sub 0.20}Cr{sub 0.92}Co{sub 0.08}O{sub 3} sintered specimens cast from optimised suspensions with 13.5, 15 and 17.5 vol.% solids loading. Aqueous suspensions were prepared using ammonium polyacrylate (PAA) as dispersant and tetramethylammonium hydroxide (TMAH) to assure a basic pH and providing stabilization. Sintering of the green discs was performed in air at 1600 {sup o}C for 4 h. Highlights: {yields} Optimum casting slips were achieved with 3 wt.% of ammonium polyacrylate and 1 wt.% of tetramethylammonium hydroxide. -- Abstract: Many studies have been performed dealing with the processing conditions of electrodes and electrolytes in solid oxide fuel cells (SOFCs). However, the processing of the interconnector material has received less attention. Lanthanum chromite (LaCrO{sub 3}) is probably the most studied material as SOFCs interconnector. This paper deals with the rheology and casting behaviour of lanthanum chromite based materials to produce interconnectors for SOFCs. A powder with the composition La{sub 0.80}Sr{sub 0.20}Cr{sub 0.92}Co{sub 0.08}O{sub 3} was obtained by combustion synthesis. Aqueous suspensions were prepared to solids loading ranging from 8 to 17.5 vol.%, using ammonium polyacrylate (PAA) as dispersant and tetramethylammonium hydroxide (TMAH) to assure a basic pH and providing stabilization. The influence of the additives concentrations and suspension ball milling time were studied. Suspensions prepared with 24 h ball milling, with 3 wt.% and 1 wt.% of PAA and TMAH, respectively, yielded the best conditions for successful slip casting. Sintering of the green discs was performed in air at 1600 {sup o}C for 4 h leading to relatively dense materials.

36 MATERIALS SCIENCE↗

CTAB-assisted sol-gel synthesis of Li{sub 4}Ti{sub 5}O{sub 12} and its performance as anode material for Li-ion batteries

Graphical abstract: Discharge capacity versus cycle number of Li{sub 4}Ti{sub 5}O{sub 12} samples synthesized by (a) CTAB-assisted sol-gel and (b) normal sol-gel method. Highlights: {yields} CTAB-assisted sol-gel route for the synthesis of nano-size Li{sub 4}Ti{sub 5}O{sub 12}. {yields} CTAB directs the microstructure of the gels and helps to control the particle size of Li{sub 4}Ti{sub 5}O{sub 12}. {yields} Li{sub 4}Ti{sub 5}O{sub 12} exhibits promising cycling performance with initial capacity of 174 mAh g{sup -1} and sustains {approx}94% beyond 30 cycles. -- Abstract: A simple CTAB-assisted sol-gel technique for synthesizing nano-sized Li{sub 4}Ti{sub 5}O{sub 12} with promising electrochemical performance as anode material for lithium ion battery is reported. The structural and morphological properties are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The electrochemical performance of both samples (with and without CTAB) calcined at 800 {sup o}C is evaluated using Swagelok{sup TM} cells by galvanostatic charge/discharge cycling at room temperature. The XRD pattern for sample prepared in presence of CTAB and calcined at 800 {sup o}C shows high-purity cubic-spinel Li{sub 4}Ti{sub 5}O{sub 12} phase (JCPDS no. 26-1198). Nanosized-Li{sub 4}Ti{sub 5}O{sub 12} calcined at 800 {sup o}C in presence of CTAB exhibits promising cycling performance with initial discharge capacity of 174 mAh g{sup -1} ({approx}100% of theoretical capacity) and sustains a capacity value of 164 mAh g{sup -1} beyond 30 cycles. By contrast, the sample prepared in absence of CTAB under identical reaction conditions exhibits initial discharge capacity of 140 mAh g{sup -1} (80% of theoretical capacity) that fades to 110 mAh g{sup -1} after 30 cycles.

36 MATERIALS SCIENCE↗

Synthesis, characterization and effect of low energy Ar ion irradiation on gadolinium oxide nanoparticles

Graphical abstract: . The figure depicts Raman spectra of (A) unirradiated and (B) 80 keV Ar ion irradiated nanoscale gadolinium oxide (Gd{sub 2}O{sub 3}) systems. Intense Raman signals corresponding to two B{sub g} modes at 288 and 384 cm{sup -1} are observed for irradiated sample along with the evolution of a new peak at 202 cm{sup -1} due to surface defects. Highlights: {yields} Gadolinium oxide nanoparticles are synthesized via a selective reduction route. {yields} 80 keV Ar ion-irradiated specimen showed better symmetric emission than pristine. {yields} Irradiation led point defect contribution was studied through spectroscopic means. -- Abstract: In this work, we report on the surfactant assisted synthesis of gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticles and their characterization through various microscopic and spectroscopic tools. Exhibiting a monoclinic phase, the nanoscale Gd{sub 2}O{sub 3} particles are believed to be comprising of crystallites with an average size of {approx}3.2 nm, as revealed from the X-ray diffraction analysis. The transmission electron microscopy has predicted a particle size of {approx}9 nm and an interplanar spacing of {approx}0.28 nm. Fourier transform infrared spectroscopy studies show that Gd-O inplane vibrations at 536.8 and 413.3 cm{sup -1} were more prominent for 80-keV Ar-ion irradiated Gd{sub 2}O{sub 3} nanosystem than unirradiated system. The photoluminescence (PL) spectra of irradiated specimen have revealed an improvement in the symmetry factor owing to significant enhancement of surface-trap emission, compared to the band-edge counterpart. Irradiation induced creation of point defects (oxygen vacancies) were predicted both from PL and electron paramagnetic resonance (EPR) studies. Further, the Raman spectra of the irradiated sample have exhibited notable vibrational features along with the evolution of a new peak at {approx}202 cm{sup -1}. This can be ascribed to an additional Raman active vibrational response owing to considerable modification of the nanostructure surface as a result of ion bombardment. Probing nanoscale defects through prime spectroscopy tools would find a new avenue for precise tuning of physical properties with generation and annihilation of defects.

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of double perovskite Mn{sub 2}FeSbO{sub 6}

Graphical abstract: Projection along the cubic perovskite axes [0 0 1] of the double perovskite Mn{sub 2}FeSbO{sub 6}. Highlights: {yields} Mn{sub 2}FeSbO{sub 6} is prepared from Mn{sub 2}O{sub 3}, Fe{sub 2}O{sub 3} and Sb{sub 2}O{sub 3} at 6 GPa and 1000 {sup o}C. {yields} According to XPS measurements, manganese is present as Mn{sup 2+}, the iron - as Fe{sup 3+}. {yields} This compound has the smallest unit cell among double perovskites. {yields} It was suppose that Mn{sub 2}FeSbO{sub 6} exhibited antiferromagnetism below 19.5 K. -- Abstract: The double perovskite Mn{sub 2}FeSbO{sub 6} has been synthesized under pressure 6 GPa and temperature 1000 {sup o}C. The crystal structure refinement of Mn{sub 2}FeSbO{sub 6} was carried out with the GSAS program suite using X-ray diffraction data. XRD pattern of Mn{sub 2}FeSbO{sub 6} was indexed with a monoclinic unit cell (space group P2{sub 1}/n) with parameters: a = 5.2431(3) A, b = 5.3935(3) A, c = 7.6358(5) A, {beta} = 89.693(2){sup o}, V = 215.927 A{sup 3}, Z = 2. It found that Fe and Sb atoms are completely ordered in 2d and 2c positions of double perovskite structure respectively. According to XPS measurements, manganese in this compound is present as Mn{sup 2+}, whiles the iron - as Fe{sup 3+}. Magnetization measurements revealed the presence about 3 mass% of ferromagnetic impurity in the sample. Dependence of AC susceptibility {chi}'' from temperature showed that magnetic properties compound are determined probably by transformation in antiferromagnetic state below 19.5 K.

36 MATERIALS SCIENCE↗

Structure and photocatalytic activity of Ni-doped ZnO nanorods

Graphical abstract: Degradation rates of rhodamine B by Zn{sub 1-x}Ni{sub x}O photocatalyst. Highlights: {yields} The Ni-doped ZnO nanorods show a new band at {approx}130 cm{sup -1} in Raman spectra at room temperature. We conclude this mode is caused by an ordered arrangement of Ni dopants in the ZnO lattice. {yields} When the Ni-doping concentration raises, the band gap first increases and then decreases. {yields} The ZnO nanorods with different Ni-doping concentraton all exhibited higher photocatalytic activity than un-doped ZnO. The order of photocatalytic activities is Zn{sub 0.95}Ni{sub 0.05}O > Zn{sub 0.9}Ni{sub 0.1}O > Zn{sub 0.98}Ni{sub 0.02}O > ZnO. -- Abstract: The one-dimensional (1D) Zn{sub 1-x}Ni{sub x}O (x = 0, 0.02, 0.05, 0.10) nanorods have been synthesized by a simple hydrothermal method. New bands show at {approx}130 cm{sup -1} in the Raman spectra of Ni-doped ZnO nanorods and their relative intensity depends on the doping concentration of nickel. The optical band gap of the ZnO nanorods have been tuned by Ni-doping, which is revealed by absorption spectra. The photocatalytic activity of Zn{sub 1-x}Ni{sub x}O was studied by comparing the degradation rate of rhodamine B (RB) under UV-light irradiation. It was found that Zn{sub 0.95}Ni{sub 0.05}O exhibited the highest photocatalytic degradation efficiency among the samples.

36 MATERIALS SCIENCE↗

One component metal sintering additive for {beta}-SiC based on thermodynamic calculation and experimental observations

Graphical abstract: . Standard Gibbs formation free energies vs. temperature for various metal carbides. The heavy line represents the standard Gibbs free energy for {beta}-SiC. The hatched area denotes the typical liquid phase hot pressing temperature of {beta}-SiC (1973-2123 K). Highlights: {yields} Various metal elements were examined as a sintering additive for {beta}-SiC. {yields} Al and Mg enhanced the density significantly without decomposing {beta}-SiC, as predicted by thermodynamic simulation. {yields} Cr, Fe, Ta, Ti, V and W additives formed metal carbide and/or silicide compounds by decomposing {beta}-SiC. {yields} This approach would be useful for selecting effective sintering additive for high temperature ceramics. -- Abstract: Various types of metals were examined as sintering additives for {beta}-SiC by considering the standard Gibbs formation free energy and vapor pressure under hot pressing conditions (1973-2123 K), particularly for applications in nuclear reactors. Metallic elements having the low long-term activation under neutron irradiation condition, such as Cr, Fe, Ta, Ti, V and W, as well as widely used elements, Al, Mg and B, were considered. The conclusions drawn from thermodynamic considerations were compared with the experimental observations. Al and Mg were found to be effective sintering additives, whereas the others were not due to the formation of metal carbides or silicides from the decomposition of SiC under hot pressing conditions.

36 MATERIALS SCIENCE↗

Template synthesis and characterization of molybdenum disulfide nanotubules

Graphical abstract: The image is a SEM image of branched MoS{sub 2} nanotubes, which are prepared in AAO templates. It is obvious to observe the branch of MoS{sub 2} nanotubes (labeled by arrows), and it reflects the microcosmic morphologies of pores in templates. Highlights: {yields} Large quantities of hollow MoS2 tubules. {yields} Explanation for the formation of branched shape. {yields} Explanation for the morphology of bamboo-like structure. -- Abstract: Molybdenum disulfide nanotubules were prepared by thermal decomposition of ammonium thiomolybdate ((NH{sub 4}){sub 2}MoS{sub 4}) precursors on anodized aluminum oxide template. Large quantities of hollow MoS{sub 2} nanotubules with the bamboo-like structure were obtained. The morphology and structures of MoS{sub 2} tubules were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, electron diffraction and optical absorption spectroscopy. MoS{sub 2} nanotubules completely reflected the three-dimensional structure of nanopores in template. The properties of Mo-S chemical bonds in lattice structure and the wetting state between porous surface and precursor have a great effect on the formation of sections in nanotubules, the ridges in the nanopores also play a very special role of this formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation mechanism of monodispersed spherical core-shell ceria/polymer hybrid nanoparticles

Graphical abstract: The formation mechanism for core-shell nanoparticles is considered to be as follows: nucleation and particle growth occur simultaneously (left square); very slow particle growth occurs (middle square). Highlights: {yields} The size of the resultant nanoparticles was strongly and complicatedly dependent on the set temperature used during reflux heating and the PVP molecular weight. {yields} The size of the nanoparticles increased by a 2-step process as the reflux heating time increased. {yields} The IR spectral changes with increasing reflux time indicated the increase in the number of cross-linked polymers in the shell. -- Abstract: Very unique core-shell ceria (cerium oxide)/polymer hybrid nanoparticles that have monodispersed spherical structures and are easily dispersed in water or alcohol without the need for a dispersant were reported recently. The formation mechanism of the unique nanoparticles, however, was not clear. In order to clarify the formation mechanism, these nanoparticles were prepared using a polyol method (reflux heating) under varied conditions of temperature, time, and concentration and molecular weight of added polymer (poly(vinylpyrrolidone)). The size of the resultant nanoparticles was strongly and complicatedly dependent on the set temperature used during reflux heating and the poly(vinylpyrrolidone) molecular weight. Furthermore, the size of the nanoparticles increased by a 2-step process as the reflux heating time increased. The IR spectral changes with increasing reflux time indicated the increase in the number of cross-linked polymers in the shell. From these results, the formation mechanism was discussed and proposed.

36 MATERIALS SCIENCE↗