Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Diffusion of Mn in GaAs studied by quantitative time-of-flight secondary ion mass spectrometry

Diffusion coefficients and the activation energy for Mn diffusion in ion-implanted and layered epitaxial structures of Ga{sub 1-x}Mn{sub x}As/GaAs are reported from quantitative time-of-flight secondary ion mass spectrometry. Samples are annealed between the growth temperature (as low as 200 deg. C) and approximately 400 deg. C. This temperature range is reported to improve the Curie temperature, which is important for the spintronic applications of these materials. Quantitative diffusion information is obtained by calibrating the Mn concentration to ion-implanted standards and the depth scale to profilometry measurements. Depth profiles obtained for ion-implanted Mn in GaAs at a dose of 1.35x10{sup 15} atoms/cm{sup 2} show increased Mn concentration within the top 5 nm of the sample but otherwise reveal no significant differences in the implantation shape after annealing up to 350 deg. C. For a higher implantation dose of 8.10x10{sup 15} Mn atoms/cm{sup 2}, diffusion is initiated after annealing at 300 deg. C with more significant diffusion at higher temperatures. The analysis of annealed epitaxial films of even higher concentration (Ga{sub 0.89}Mn{sub 0.11}As) exhibits diffusion at all temperatures measured (200-400 deg. C) and an activation energy of 0.67+-0.09 eV is calculated by fitting the profiles to an error function.

36 MATERIALS SCIENCE↗

Thermoelectric power generator module of 16x16 Bi{sub 2}Te{sub 3} and 0.6%ErAs:(InGaAs){sub 1-x}(InAlAs){sub x} segmented elements

We report the fabrication and characterization of thermoelectric power generator modules of 16x16 segmented elements consisting of 0.8 mm thick Bi{sub 2}Te{sub 3} and 50 {mu}m thick ErAs:(InGaAs){sub 1-x}(InAlAs){sub x} with 0.6% ErAs by volume. An output power up to 6.3 W was measured when the heat source temperature was at 610 K. The thermoelectric properties of (InGaAs){sub 1-x}(InAlAs){sub x} were characterized from 300 up to 830 K. The finite element modeling shows that the performance of the generator modules can further be enhanced by improving the thermoelectric properties of the element materials, and reducing the electrical and thermal parasitic losses.

36 MATERIALS SCIENCE↗

Optimization of Semiconductor Superlattice for Spin Polarized Electron Source

Optimized AlInGaAs/AlGaAs superlattice with strained quantum wells has been developed, fabricated and studied. The choice of hetero-layer composition and thicknesses is based on calculations of Sl's band energy spectrum, photoabsorption spectrum and transport properties. Electron emission from the developed photocathodes demonstrates maximal polarization above 90%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MBE Growth of Graded Structures for Polarized Electron Emitters

SVT Associates, in collaboration with SLAC, has investigated two novel photocathode design concepts in an effort to increase polarization and quantum efficiency. AlGaAsSb/GaAs superlattice photocathodes were fabricated to explore the effect of antimony on device operation. In the second approach, an internal electrical field was created within the superlattice active layer by varying the aluminum composition in AlGaAs/GaAs. A 25% increase in quantum efficiency as a result of the gradient was observed.

36 MATERIALS SCIENCE↗

Superlattice Photocathode with High Brightness and Long NEA-Surface Lifetime

We have suggested that a small momentum spread of photoelectrons and high quantum efficiency can be obtained concurrently by a photocathode using a semiconductor with a superlattice instead of a bulk. We have begun to search for the suitable semiconductor material of a superlattice photocathode for maintaining the surface with a negative electron affinity state for a long time. We measured quantum efficiency degradation of photocathodes using GaAs and AlGaAs semiconductors with various electron affinities. The AlGaAs semiconductor had a quantum efficiency lifetime of 10 times long compared with the GaAs semiconductor. We found that the AlGaAs semiconductor was the suitable material for the superlattice photocathode with the surface maintaining a negative electron affinity state for a long time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarized Electrons in Darmstadt: Recent Developments

The injector of the superconducting Darmstadt electron linear accelerator S-DALINAC will soon be extended by a source of polarized electrons. A test set-up of the future source consists of a 100 keV GaAs polarized gun and associated beamline including an assembly for polarization manipulation and determination. We give a short overview of the existing and planned polarimeters at the different accelerator sites, introduce briefly the future implementation of the polarized source at the S-DALINAC and list experiments that are planned with polarized electron and photon beams.

43 PARTICLE ACCELERATORS↗

Sources of Helicity-correlated Electron Beam Asymmetries

The availability of high current, high polarization electron beams from laser-driven GaAs photocathodes has enabled a broad program studying parity violation in electron scattering. Precision measurements of the tiny (<1 part per million) parity-violating beam-helicity asymmetry are used to study the structure of nuclei or to test the Standard Model of electroweak interactions. As these experiments grow ever more precise, asymmetric beam properties between the two beam helicity states threaten to become the leading source of experimental uncertainty.These helicity-correlated beam asymmetries are predominantly created in the conversion of circularly polarized laser light to a polarized electron beam. In recent experiments at Jefferson Lab, improved techniques for configuring the laser optics of the polarized source have been used to control beam asymmetries to such a level as to be a negligible source of systematic uncertainty. This successful result serves as a promising start for the next generation of parity-violating electron-nuclear scattering measurements, which strive to improve precision by a factor of twenty.

43 PARTICLE ACCELERATORS↗

Epitaxial growth and picosecond carrier dynamics of GaInAs/GaInNAs superlattices

We study GaInAs/GaInNAs superlattice structures grown on InP substrate as potential candidates for photoconductive terahertz devices or saturable absorbers working at 1.55 {mu}m wavelength. The N-rich GaInNAs layers are flat, with no three-dimensional islanding, and act as trapping layers where carriers can recombine rapidly. The carrier lifetime in GaInAs/GaInNAs superlattice was measured for various growth parameters using time-resolved differential transmission experiments at 1.55 {mu}m wavelength. The carrier lifetime is found to depend strongly on N content and can be reduced down to 3.8 ps for samples with 14% of N. The mechanisms involved in the capture process of photocarriers are discussed.

36 MATERIALS SCIENCE↗

Strain-induced microstructural evolution in epitaxial Fe/MgO layers grown on In{sub x}Ga{sub 1-x}As(001) substrates

Epitaxial Fe/MgO layers have been grown on In{sub x}Ga{sub 1-x}As substrates to examine the epitaxial relationship and the morphological variation with respect to indium content, x and the growth temperature of MgO interlayer. The in-plane epitaxial relationship of Fe[010]//MgO[110]//In{sub x}Ga{sub 1-x}As[110] is found in the structures of all x values for 4 nm thick MgO layers grown at room temperature. Epitaxial MgO interlayers grow in two-dimensional layer regardless of x while the morphology of subsequent Fe changes from two-dimensional layer to three-dimensional islands with the increase of x. Furthermore, the average size of Fe islands becomes smaller at higher x value due to enhanced underlying strain. The elevated growth temperature of MgO has led to partial strain relaxation, resulting in the suppression of three-dimensional Fe island formation.

36 MATERIALS SCIENCE↗

Conductive atomic force microscopy study of InAs growth kinetics on vicinal GaAs (110)

Conductive atomic force microscopy has been used to investigate the effect of atomic hydrogen and step orientation on the growth behavior of InAs on GaAs (110) misoriented substrates. Samples grown by conventional molecular beam epitaxy exhibit higher conductivity on [110]-multiatomic step edges, where preferential nucleation of InAs nanowires takes place by step decoration. On H-terminated substrates with triangular terraces bounded by [115]-type steps, three-dimensional InAs clusters grow selectively at the terrace apices as a result of a kinetically driven enhancement in upward mass transport via AsH{sub x} intermediate species and a reduction in the surface free energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ferromagnet-semiconductor nanowire coaxial heterostructures grown by molecular-beam epitaxy

GaAs-MnAs core-shell structures are grown by molecular-beam epitaxy using wurtzite GaAs nanowires on GaAs(111)B. The nanowire structures curve due to the strain at the heterointerface when the substrate is not rotated during the growth, evidencing the diffusion length in the MnAs overgrowth being less than the perimeter of the columns. The MnAs growth is thus demonstrated to take place by direct deposition on the sidewall. The MnAs envelope is m-plane-oriented with the c-axis along the nanowire axis. The magnetic easy axis hence lies in the surface plane of the substrate, which is confirmed by magnetization measurements and magnetic-force microscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monte Carlo investigation of terahertz plasma oscillations in gated ultrathin channel of n-InGaAs

By numerical simulations we investigate the dispersion of the plasma frequency in a gated channel of n-type InGaAs layer of thickness W and submicron length L at T=300 K. In the presence of a source-drain voltage and for a carrier concentrations of 10{sup 18} cm{sup -3} the spectra evidences a peaked shape with two main bumps, the former at high frequency corresponding to the three-dimensional plasma frequency and the latter at a low frequency. The frequency value of the latter peak exhibits a dispersion as the inverse of the channel length in agreement with the predictions of gradual channel approximation. At increasing drain voltages the instabilities associated with the presence of Gunn domains are responsible for a suppression of the plasma peak in favor of the onset of a peak in the subterahertz domain associated with transit time effects.

36 MATERIALS SCIENCE↗

Terahertz spectroscopy of shift currents resulting from asymmetric (110)-oriented GaAs/AlGaAs quantum wells

We report the observation and the study of an additional shift current tensor element in (110)-oriented GaAs quantum wells, which arises from an out-of-plane asymmetry of the quantum well structure. The current resulting from this tensor element is optically induced with 150 fs laser pulses and detected by measuring the simultaneously emitted terahertz radiation. This terahertz spectroscopy of shift currents is a powerful technique for symmetry investigations, which shows, for example, that our nominally symmetric (110)-oriented GaAs/AlGaAs quantum wells grown by molecular beam epitaxy are in reality asymmetric structures with different right and left interfaces.

36 MATERIALS SCIENCE↗

The influence of As/III pressure ratio on nitrogen nearest-neighbor environments in as-grown GaInNAs quantum wells

The energy fine structure, corresponding to different nitrogen nearest-neighbor environments, was observed in contactless electroreflectance (CER) spectra of as-grown GaInNAs quantum wells (QWs) obtained at various As/III pressure ratios. In the spectral range of the fundamental transition, two CER resonances were detected for samples grown at low As pressures whereas only one CER resonance was observed for samples obtained at higher As pressures. This resonance corresponds to the most favorable nitrogen nearest-neighbor environment in terms of the total crystal energy. It means that the nitrogen nearest-neighbor environment in GaInNAs QWs can be controlled in molecular beam epitaxy process by As/III pressure ratio.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Interfacial intermixing in InAs/GaSb short-period-superlattices grown by molecular beam epitaxy

The unique properties of the noncommon-atom InAs/GaSb short-period-superlattices (SPSL) strongly depend on the interface structure. These interfaces are characterized using transmission electron microscopy (TEM). The compositional sharpness is obtained from the comparison of the experimental contrast in g{sub 002} two-beam dark-field TEM images with simulated intensity profiles, which are calculated assuming that the element distribution profiles are described by sigmoidal functions. The interfacial intermixing, defined by the chemical width, is obtained for SPSL with different periods and layer thicknesses, even in the extreme case of nominally less than 3 ML thick InAs layers. Nominal 1 ML InSb layers intentionally inserted are also identified.

36 MATERIALS SCIENCE↗

Strong localization effect in magnetic two-dimensional hole systems

We report an extensive study of the magnetotransport properties of magnetically doped two-dimensional hole systems. Inverted manganese modulation doped InAs quantum wells with localized manganese ions providing a magnetic moment of S=5/2 were grown by molecular beam epitaxy. Strong localization effect found in low-field magnetotransport measurements on these structures can either be modified by the manganese doping density or by tuning the two-dimensional hole density p via field effect. The data reveal that the ratio between p and manganese ions inside or in close vicinity to the channel enlarges the strong localization effect. Moreover, asymmetric broadening of the doping layer due to manganese segregation is significantly influenced by strain in the heterostructure.

36 MATERIALS SCIENCE↗

Alkali Metal Induced Two Dimensional Electron Systems at Cleaved Surfaces of InAs

The authors have performed low-temperature in-plane magnetotransport measurements on two-dimensional electron systems induced by deposition of Cs or Na at in situ cleaved surfaces of p-type InAs. The coverage dependence of the surface electron density N{sub s} strongly supports a simple model based on a surface donor level lying above the conduction band minimum. The maximum Fermi level positions obtained from the saturation values of N{sub s} are compared to those of previous photoelectron spectroscopy measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasiequilibrium nonlinearities in Faraday and Kerr rotation from spin-polarized carriers in GaAs

Semiconductor Bloch equations (SBEs), which microscopically describe optical properties in terms of the dynamics of a Coulomb interacting, spin-unpolarized electron-hole plasma, can be solved in two limits: the coherent and the quasiequilibrium regimes. Recently, Nemec et al. reported circularly polarized pump-probe absorption spectra in the quasiequilibrium regime for carrier spin-polarized bulk GaAs at room temperature, which lacked a suitable microscopic theoretical understanding. We have very recently explained their results by solving the spin-SBEs in the quasiequilibrium regime (spin-Bethe-Salpeter equation), and accounted for spin-dependent mechanisms of optical nonlinearity. Here, we extend our theory to the microscopic calculation of Kerr and Faraday rotation in the quasiequilibrium regime, for which there are no experimental or theoretical results available.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗