Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Te-As-Se glass microstructured optical fiber for the middle infrared

We present the first fabrication, to the best of our knowledge, of chalcogenide microstructured optical fibers in Te-As-Se glass, their optical characterization, and numerical simulations in the middle infrared. In a first fiber, numerical simulations exhibit a single-mode behavior at 3.39 and 9.3 {mu}m, in good agreement with experimental near-field captures at 9.3 {mu}m. The second fiber is not monomode between 3.39 and 9.3 {mu}m, but the fundamental losses are 9 dB/m at 3.39 {mu}m and 6 dB/m at 9.3 {mu}m. The experimental mode field diameters are compared to the theoretical ones with a good accordance.

36 MATERIALS SCIENCE↗

Cementitious Waste Form Development for Treatment of EMF Evaporator Bottoms - 18611

Direct Feed Low-Activity Waste operations at the Hanford Site (Washington State, USA) involve concentrating the Hanford low-activity waste (LAW) melter off-gas condensate waste stream by evaporation at the Effluent Management Facility (EMF) followed by recycle back to the melter feed. The EMF evaporator bottoms waste stream is expected to contain variable, high levels of halides and sulfate that could strain LAW melter performance and co-mingled radionuclides, technetium-99 ({sup 99}Tc) and iodine-129 ({sup 129}I), that readily volatilize in the LAW melter and are expected to accumulate during recycle. To this end, there is a need for alternative disposition paths for the EMF evaporator bottoms waste stream that bypass recycling to the LAW melter. One such alternative is solidification in low-temperature cementitious waste forms (CWFs) that meet disposal facility acceptance criteria. The work herein addresses recent waste form development and testing performed to identify CWF candidates that meet off-site disposal acceptance criteria and/or on-site Hanford Integrated Disposal Facility waste acceptance criteria. Phase one testing activities included the production and evaporation of simulated EMF evaporator feed from the Hanford Waste Treatment and Immobilization Plant melter offgas effluent liquid secondary waste stream, which was then analyzed to demonstrate the behavior and fate of contaminants of concern (COCs). Based on analyses from these preliminary tests, a simulant for the EMF evaporator bottoms waste stream was formulated and used to evaluate several dry material compositions proposed for CWF development and testing. In particular, dry ingredient recipes used in early testing efforts contained a combination of ordinary Portland cement (OPC), Class F fly ash (FA), blast furnace slag (BFS), Aquaset{sup R} II-H, and/or Aquaset{sup R} II-GH to generate CWFs at various water-to-dry material ratios. CWFs were then tested according to the Toxicity Characteristic Leaching Procedure (TCLP) for COCs, such as Cr, Zn, As, and Se, to determine which specimens comply with land disposal restrictions (40 CFR 268). The results of TCLP testing showed that chromium leaching was a persistent challenge, except when using the original Cast Stone dry ingredient recipe (8% OPC, 47% BFS, 45% FA) to immobilize the EMF evaporator bottoms simulant. Improving Cr immobilization and evaluating leaching behavior for COC Hg were identified as objectives for the second phase of testing. During second phase testing efforts, a screening test was performed to determine whether the bulk EMF waste composition is a factor in producing an acceptable solidified waste form. A series of eight simulants with varying concentrations of major salts of boron, chloride, nitrite, and sulfate were prepared and immobilized using three dry ingredient recipes. Each dry ingredient recipe contained two to three of the following: BFS, OPC, FA, and Aquaset{sup R} II-GH. All eight simulants were spiked with Zn, Cr, As, Se, and Hg prior to production of the CWFs, similar to previous tests, and used to test for residual free liquids and TCLP analysis. The TCLP results indicate that all phase two formulated CWFs meet land disposal requirements when compared to Universal Treatment Standards (40 CFR 268) for hazardous wastes, regardless of simulant composition. Furthermore, re-absorption of residual free liquids is most quickly achieved for nearly all simulant compositions using the original Cast Stone recipe; however, replicas analysis is required to corroborate these findings. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Scanning SQUID microscopy on polycrystalline SmFeAsO_{0.85} and NdFeAsO_{0.94}F_{0.06}

The order parameter of the recently-discovered ferric arsenide family of superconductors remains uncertain. Some early experiments on polycrystalline samples suggested line nodes in the order parameter, however later experiments on single crystals have strongly supported fully-gapped superconductivity. An absence of nodes does not rule out unconventional order: {pi} phase shifts between the separate Fermi sheets and time-reversal symmetry-breaking components in the order parameter remain possibilities. One test for unconventional order is scanning magnetic microscopy on well-coupled polycrystalline samples: d- or p-wave order would result in orbital frustration, leading to spontaneous currents and magnetization in the superconducting state. We have performed scanning SQUID microscopy on SmFeAsO{sub 0.85} and NdFeAsO{sub 0.94}F{sub 0.06}, and in neither material do we find spontaneous orbital currents, ruling out p- or d-wave order.

36 MATERIALS SCIENCE↗

Limits on the Superconducting Order Parameter in NdFeAsO_{1-x}F_y from Scanning SQUID Microscopy

Identifying the symmetry of the superconducting order parameter in the recently-discovered ferrooxypnictide family of superconductors, RFeAsO{sub 1-x}F{sub y}, where R is a rare earth, is a high priority. Many of the proposed order parameters have internal {pi} phase shifts, like the d-wave order found in the cuprates, which would result in direction-dependent phase shifts in tunneling. In dense polycrystalline samples, these phase shifts in turn would result in spontaneous orbital currents and magnetization in the superconducting state. We perform scanning SQUID microscopy on a dense polycrystalline sample of NdFeAsO{sub 0.94}F{sub 0.06} with T{sub c} = 48K and find no such spontaneous currents, ruling out many of the proposed order parameters.

36 MATERIALS SCIENCE↗

Assessing ecological risks to the fish community from residual coal fly ash in Watts Bar Reservoir, Tennessee

For this research, extensive site-specific biological and environmental data were collected to support an evaluation of risks to the fish community in Watts Bar Reservoir from residual ash from the December 2008 Tennessee Valley Authority (TVA) Kingston ash release. This paper describes the approach used and results of the risk assessment for the fish community, which consists of multiple measurement endpoints (measures of exposure and effects) for fish. The lines of evidence included 1) comparing postspill annual fish community assessments with nearby prespill data and data from other TVA reservoirs, 2) evaluating possible effects of exposures of fish eggs and larval fish to ash in controlled laboratory toxicity tests, 3) evaluating reproductive competence of field-exposed fish, 4) assessing individual fish health through physical examination, histopathology, and blood chemistry, 5) comparing fish tissue concentrations with literature-based critical body residues, and 6) comparing concentrations of ash-related contaminants in surface waters with US Environmental Protection Agency's (USEPA) Ambient Water Quality Standards for Fish and Aquatic Life. These measurement endpoints were treated as independent lines of evidence that were integrated into an overall weight-of-evidence estimate of risk to the fish community. Collectively, the data and analysis presented here indicate that ash and ash-related constituents pose negligible risks to the fish communities in Watts Bar Reservoir. This conclusion contradicts the predictions by some researchers immediately following the ash release of devastating effects on the aquatic ecology of Watts Bar Reservoir. The information presented in this article reaffirms the wisdom of carefully evaluating the evidence before predicting probable ecological effects of a major event such as the TVA Kingston ash release. Lastly, this study demonstrates that a thorough and detailed investigation using multiple measurement endpoints is needed to properly evaluate ecological effects.

54 ENVIRONMENTAL SCIENCES↗

Effects of Selenium on Mercury Bioaccumulation in a Terrestrial food Chain from an Abandoned Mercury Mining Region

Few reports of the relationship exist between mercury (Hg) and selenium (Se) from locations of severe Hg contamination in terrestrial environments. Here, we report the concentrations of Hg and Se as well as Se:Hg molar ratios in biotic samples collected from a region with a long history of Hg mining. Nitrogen isotopes (δ{sup 15}N) were analyzed to confirm the trophic levels. Results showed that bird feathers at the top trophic level exhibited the highest Hg concentrations, while the lowest concentrations were found in herbivorous insects, demonstrating a significant biomagnification across the food chain. In contrast, herbivorous insects of different types (generalists vs. specialized rice pests) exhibited both the highest and the lowest concentrations of Se, indicating a lack of biomagnification. Indeed, Se was correlated positively with Hg when Se:Hg ratios were greater than one, suggesting Se:Hg molar ratios can be a controlling influence on Hg in terrestrial organisms.

54 ENVIRONMENTAL SCIENCES↗

Ab Initio Study of Magnetism in Nonmetal Adsorption on Arsenene Monolayer

The structural, electronic, and magnetic properties of adsorbed arsenene monolayer with a series of nonmetal atoms, including B, C, F, N, and O, are systematically investigated using first-principles calculations. Nonmagnetic behavior shows in the B-, F-, N-, and O-adsorbed systems. The magnetism has been observed in the case of C, which originated from the 2p electrons of C and its neighboring As 4p states. Meanwhile, these nonmagnetic elements can induce impurity channels around Fermi level, which reduce band gap of the systems. It implies that the B-, F-, N-, and O-adsorbed arsenene tune into narrow gap semiconductors without magnetic character. The X-adsorbed (X = B, C, F, N, and O) arsenene systems are promising candidates for spintronic devices in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

{sup 75}As NMR and XRD Study of Structural and Electronic Inhomogeneities in Ba(Fe{sub 1−x}Ni{sub x}){sub 2}As{sub 2}

We have used {sup 75}As NMR and x-ray diffraction analysis to study the structural and electronic inhomogeneities in Ba(Fe{sub 1−x}Ni{sub x}){sub 2}As{sub 2} crystals with x near the border of the antiferromagnetic domain. Unequal nickel population of the equivalent Fe planes and rather homogeneous distribution of Ni inside the planes have been found in the well-ordered single crystal with x = 0.036. Below 40 K a signal wipeout of {sup 75}As NMR spectra is observed for the crystals with x = 0.036 and 0.037. This fact together with spin-lattice relaxation peculiarities is treated a result of the system glassy behavior in this region of the phase diagram. The {sup 75}As NMR data also indicate on partial suppression of antiferromagnetic spin fluctuations around the Ni impurity in these crystals at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the Rare Earth Effects on the Magnetic Fluctuations in RbLn{sub 2}Fe{sub 4}As{sub 4}O{sub 2} (Ln = Tb, Dy, and Ho) by Mössbauer Spectroscopy

In the current work, we report the investigation of RbLn{sub 2}Fe{sub 4}As{sub 4}O{sub 2} (Ln = Tb, Dy, and Ho) and RbFe{sub 2}As{sub 2} by {sup 57}Fe Mössbauer spectroscopy. Singlet pattern has been observed for all the samples, indicating the absence of static magnetic ordering down to 5.9 K on the Fe sublattice. The observed intermediate value of the isomer shift confirms the effective self charge transfer effect for the studied superconductors. Debye temperatures of these samples have been determined by the temperature dependence of the isomer shift. Most importantly, we observe different spectral line width broadening behaviors for samples with different rare earth elements, and no line width broadenings for samples Ln = Tb and Ho. These results suggest that the observed magnetic fluctuations at the Fe site might be sensitive to the magnetic behaviors of the rare earth magnetic moments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realization of Magnetostructural Transition and Magnetocaloric Properties of Ni–Mn–Mo–Sn Heusler Alloys

As magnetic cooling refrigerant, Ni–Mn–Sn Heusler alloys have gained significant potentials for a wide range of practical applications as compared with other expensive Ga-doped Ni–Mn based Heusler alloys, toxic As and P doped Mn-based alloys and rare-earth elements like Gd-based alloys. Consequently, an inclusive investigation on magnetostructural transition and magnetocaloric features of Ni{sub 43}Mn{sub 47−x}Mo{sub x}Sn{sub 10} alloys is carried out. The alloys are assembled through arc-melting technique and their X-ray diffraction analysis confirms their B{sub 2}-type crystal structure at room temperature. As the Mo contents are increased, the magnetostructural transition temperature increases for a temperature range between Curie temperature of austenite and martensite phases. Obvious metamagnetic behavior and magnetic hysteresis are observed in isothermal magnetization curves, suggesting that the temperature and magnetic field can be used as robust tools for tuning the structural transformation in Heusler alloys. The noticeable magnetocaloric effect suggests that the prepared alloys can be an attractive choice for magnetic refrigeration applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-Enhanced Transitional Transport of Electronic Fluids in EuFe{sub 2}As{sub 2}

We demonstrate the effect of very high pressure on the pressure-enhanced transitional transport of electronic fluids in EuFe{sub 2}As{sub 2} as well as the frictionless transport of many (condensed) electrons in EuFe{sub 2}As{sub 2} by using the verified absolute reaction approach which is borrowed from the quantum chemistry. Our results demonstrate that tuning of high pressure could enhance the onset temperature of transitional transport of electronic fluids in EuFe{sub 2}As{sub 2} to around 128 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure and Linhard Function of Iron-Based Superconductor La{sub 0.5−x}Na{sub 0.5 + x}Fe{sub 2}As{sub 2}

We perform theoretical studies of the iron-based superconductor La{sub 0.5−x}Na{sub 0.5 + x}Fe{sub 2}As{sub 2}. Using density functional calculation with virtual crystal approximation, band structures, density of states, and Fermi surfaces are obtained for different La/Na composition by varying x value. Furthermore, the nesting property is also investigated using the Linhard function. Our main findings are as follows: For undoped (x = 0.0) case, the magnetic and electronic structure share great similarities with extensively studied BaFe{sub 2}As{sub 2}. Upon hole doping (x = 0.3), the Q = (π,π) nesting property are preserved. However, upon electron doping (x = -0.3), the Fermi surfaces undergo a dramastic change into 3D and complex structure. We find this change is attributed to the comprehensive influence of band filling and chemical pressure of La{sup 3+}. We propose the asymmetric change of Fermi surfaces upon doping may in some sense explain the electron-hole asymmetry in phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Deposition Temperature on the Structural and Physical Properties of Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} Thin Film

Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} thin films have been grown directly on (001) SrTiO{sub 3} (STO) substrates by pulsed laser deposition at the temperatures from 640 to 700 {sup ∘}C. Effects of deposition temperature (T{sub s}) on the structure, magnetic, and superconducting properties of the films are investigated systematically. It is found that Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} film grown at lower deposition temperature is polycrystalline, and the optimized temperature of 685 {sup ∘}C can yield high-quality epitaxial Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} film. The (002) diffraction peak of Fe metal at 2𝜃 =∼ 65{sup ∘} is observed along with the (00l) diffraction peaks of Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} films deposited at all temperatures, which is attributed to the decomposition of BaFe{sub 1.8}Co{sub 0.2}As{sub 2} target when a high-energy pulsed laser hit on the target in a high vacuum. X-ray photoelectron spectra of Fe 2p show that the relative percentage of zerovalent ion (Fe{sup 0}) is almost equal to that of divalent ion (Fe{sup 2+}) for the film deposited at 670 {sup ∘}C, which is different from that most Fe{sup 2+} ions exist in the BaFe{sub 1.8}Co{sub 0.2}As{sub 2} target. The saturation magnetization (M{sub s}) increases from 7.88 to 240.5 emu/cm{sup 3} monotonously with the increase of Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} film deposition temperature. The maximum zero-resistance temperature (T{sub c}{sup 0}) of ∼16 K was obtained, which can be attributed to the high quality of the Ba(Fe{sub 1.8}Co{sub 0.2}){sub 2}As{sub 2} film. The coexistence of superconductivity (SC) and ferromagnetism (FM) in the BaFe{sub 1.8}Co{sub 0.2}As{sub 2} films was discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles Study of Strain-Induced Magnetism in Defective Arsenene

By using first-principles calculations, we explore the influences of tensile strain on the magnetic properties of a defective arsenene monolayer with mono-vacancy and di-vacancy. Calculation results show that unstrained defective arsenene monolayers both are intrinsically nonmagnetic. However, appropriate tensile strains can induce a ferromagnetic coupling in mono-vacancy- (8%) and di-vacancy-doped systems (7%), respectively. In addition, we also discussed the physical mechanism of strain-induced magnetism emergence and predicted a possibility of magnetism appearance in the experiment. Our study may provide insight for the design of memory-switching spintronic devices with metal-free magnetism by using arsenene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of High Pressure and Temperature on Magneto-Electronic, Thermodynamic, and Transport Properties of Antiferromagnetic HoPdX (X = As, Ge) Alloys

We present electronic, magnetic, thermoelectric, and thermodynamic properties of half-Heusler HoPdAs and HoPdGe materials in stable α-phase. They crystallize in cubic MgAgAs-type structure. The stable phase is found to be antiferromagnetic in comparison to the other magnetic and nonmagnetic states. The electronic structure calculations display the metallic behavior in both spin states. The effect of pressure and temperature on unit cell volume, thermal expansion coefficient, heat capacity, and Grüneisen parameter have also been analyzed using the quasi-harmonic Debye model. The alloys present a high absolute Seebeck coefficient with a value of 203.26 μV/K for HoPdAs and 53.19 μV/K for HoPdGe at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface-Induced and Interface-Enhanced Superconductivity

Among the various theoretical mechanisms proposed to reach a higher Tc, the interface mechanism in different forms has been the one most explored, and it provides continual inspiration and hope for realizing the ultimate goal for researchers in the superconductivity field—room-temperature superconductivity. Difficulties do exist, as most of the materials proposed to exhibit the interfacial mechanism are artificially formed heterostructures and are by nature delicate and easily disturbed by strain and change in the stoichiometry at the interface. The discoveries of superconductivity in naturally assembled single crystals of rare earth (R)-doped CaFe2As2 (Ca122) with a Tc up to 49 K and undoped CaFe2As2 with a Tc up to 25 K have opened an alternate route to tackle the problem. The experimental observation has provided the most direct evidence for interface-induced superconductivity in Ca122 to date and possibly in R-doped Ca122. Given the fact that neither chemical doping nor the application of physical pressure has ever induced a Tc higher than 40 K in bulk FeSe, the reports of Tc up to 45–109 K in FeSe/STO thin films demonstrate that FeSe/STO is an ideal system in which to explore interface-enhanced superconductivity. Here we review the above three specific examples of our effort toward superconductors of higher Tc to demonstrate that the interface mechanism may be a promising paradigm to achieve higher Tc.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizing the Josephson Effect on Ba-122 Single-Crystal Junctions

This paper presents c-direction hybrid Josephson junctions with base electrodes of Co:BaFe{sub 2}As{sub 2} single crystals. To realize Josephson junctions, it applies standard photolithography technologies and a newly developed surface polishing method that was used. As conventional isotropic s-wave superconductor counter electrodes used double layers of Pb/In. The artificial barrier for the tunneling junctions consists of a thin sputtered Ti layer or a thermally evaporated Al layer; both layers were used as an insulator barrier. For characterizing the Josephson effects with TiO{sub x} barrier, we could realize I{sub c}R{sub N} products of about 13.7 μV and unconventional I{sub c}-T dependencies. The formation of Shapiro steps under the influence of microwave irradiation and magnetic field to the junctions will be discussed as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗