Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “.NET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Thermal performance of multilayer insulations

Experimental and analytical studies were conducted in order to extend previous knowledge of the thermal performance and gas evacuation characteristics of three selected multilayer insulation (MLI) composites. Flat plate calorimeter heat flux measurements were obtained for 20- and 80- shield specimens using three representative layer densities over boundary temperatures ranging from 39 K (70 R) to 389 K (700 R). Laboratory gas evacuation tests were performed on representative specimens of each MLI composite after initially purging them with helium, nitrogen, or argon gases. In these tests, the specimens were maintained at temperatures between 128 K (230 R) and 300 K (540 R). Based on the results of the laboratory-scale tests, a composite MLI system consisting of 112 unperforated, double-aluminized Mylar reflective shields and 113 water preconditioned silk net spacer pairs was fabricated and installed on a 1.22-m-(4-ft-) diameter calorimeter tank.

Keller, C. W.↗

Low-speed wind tunnel tests of a 50.8-centimeter (20-in.) 1.15-pressure-ratio fan engine model

At a typical STOL aircraft takeoff and landing velocity, wind tunnel aerodynamic and acoustic measurements demonstrated that an inlet lip-area contraction ratio of 1.35 was superior to a ratio of 1.26 at high incidence angles. A 17 percent reduction in net thrust and an increase of 9 decibels in sound pressure level at the blade passing frequency resulted from inlet flow separation at an incidence angle of 50 deg with the 1.26-contraction-ratio inlet. Reverse-thrust forces obtained with blade rotation through the feathered angle were 1.8 times larger than with blade rotation through the flat angle. Reverse-thrust force was reduced from 30 to 50 percent and sound pressure level increased from 3 to 7 decibels at the blade passing frequency between the wind-tunnel-off condition and a typical STOL aircraft landing velocity.

Wesoky, H. L.↗

Acoustic results of supersonic tip speed fan blade modification

A supersonic tip speed single stage fan was modified with the intent of reducing multiple pure tone (MPT) or buzz saw noise. There were three modifications to the blades from the original design. The modifications to the blade resulted in an increase in cascade throat area causing the shock to start at a lower corrected fan speed. The acoustic results without acoustically absorbing liners showed substantial reduction in multiple pure tone levels. However, an increase in the blade passing frequency noise at takeoff fan speed accompanied the MPT reduction. The net result however, was a reduction in the maximum 1000-foot (304.8 m) altitude level flyover PNL. For the case with acoustic treatment in the inlet outer wall, the takeoff noise increased relative to an acoustically treated baseline. This was largely due to the increased blade passing frequency noise which was not effectively reduced by the liner.

Jutras, R. R.↗

Analysis of the proposed utilization of TDRS system by the HEAO-C satellite

The primary function of the study was to assess the impact upon the HEAO telecommunications system of the proposed relay satellite-to-ground-link configuration. The system is designed to perform the function of most of the NASA ground tracking and communications network at a net cost savings for NASA.

Weathers, G.↗

Dual frequency dichroic feed performance

The NASA Deep Space Net (DSN) in support of the Viking Mars Project in 1976, and for science and technology demonstrations during the Mariner-Venus-Mercury mission in 1974, has developed and implemented a dual (S- and X-band) feed for large ground microwave antennas. This feed provides for a multiplicity of functions; very low listening capability at each downlink (spacecraft-to-earth) band as well as simultaneous diplexed very high cw power uplink (earth-to-spacecraft) at the S-band frequency. Total 64-m antenna system performance, is considered in terms of gain, operating noise temperature and dual beam pointing or boresight coincidence. Because of the unique ability to fold or stow the dual band feed elements for single band operations, the performance definition between single and dual band operations will be reliable and accurate.

Bathker, D. A.↗

Calculated photoelectron pitch angle and energy spectra

Calculations of the steady-state photoelectron energy and angular distribution in the altitude region between 120 and 1000 km are presented. The distribution is found to be isotropic at all altitudes below 250 km, while above this altitude anisotropies in both pitch angle and energy are found. The isotropy found in the angular distribution below 250 km implies that photoelectron transport below 250 km is insignificant, while the angular anisotropy found above this altitude implies a net photoelectron current in the upward direction. The energy anisotropy above 500 km arises from the selective backscattering of the low energy photoelectron population of the upward flux component by Coulomb collisions with the ambient ions. The total photoelectron flux attains its maximum value between about 40 and 70 km above the altitude at which the photoelectron production rate is maximum. The displacement of the maximum of the equilibrium flux is attributed to an increasing (with altitude) photoelectron lifetime. Photoelectrons at altitudes above that where the flux is maximum are on the average more energetic than those below that altitude.

Mantas, G. P.↗

Crack opening stretch in a plate of finite width

The problem of a uniaxially stressed plate of finite width containing a centrally located damage zone is considered. It is assumed that the flaw may be represented by a part-through crack perpendicular to the plate surface, the net ligaments in the plane of the crack and through-the-thickness narrow strips ahead of the crack ends are fully yielded, and in the yielded sections the material may carry only a constant normal traction with magnitude equal to the yield strength. The problem is solved by neglecting the bending effects and the crack opening stretches at the center and the ends of the crack are obtained. Some applications of the results are indicated by using the concepts of critical crack opening stretch and constant slope plastic instability.

Erdogan, F.↗

Measurement of beam divergence of 30-centimeter dished grids

The beam divergence of a 30-centimeter diameter thrustor with dished grids was calculated from current densities measured with a probe rake containing seventeen planar molybdenum probes. The measured data were analyzed as a function of a number of parameters. The most sensitive parameters were the amount of compensation of the accelerator grid and the ratio of net to total accelerating voltage. The thrust losses were reduced by over 5 percent with the use of compensated grids alone, and by variation of other parameters the overall thrust losses due to beam divergence were reduced to less than 2 percent.

Danilowicz, R. L.↗

Wind tunnel tests of a 20 inch diameter 1.15 pressure ratio fan engine model

Aerodynamic and acoustic measurements at a typical STOL aircraft takeoff and landing velocity demonstrated that a 1.35 inlet lip area contraction ratio was superior to a 1.26 ratio at high nacelle incidence angles. Reverse thrust, obtained with a variable pitch rotor, was lower at the landing velocity, and the noise level higher, than at the static condition. High speed tests showed that, for the design cruise Mach number of 0.75, internal losses and external drag were 27 per cent of the ideal fan net thrust, and propulsive efficiency was estimated to be 59 per cent for an 85 per cent efficient fan stage. For comparison, a similar 1.55 pressure ratio fan system would have a propulsive efficiency of 62 per cent.

Wesoky, H. L.↗

Relativistic particle motion in nonuniform electromagnetic waves

It is shown that a charged particle moving in a strong nonuniform electromagnetic wave suffers a net acceleration in the direction of the negative intensity gradient of the wave. Electrons will be expelled perpendicularly from narrow laser beams and various instabilities can result.

Schmidt, G.↗

A Saturnian gas ring and the recycling of Titan's atmosphere

Atoms which escape Titan's atmosphere are unlikely to possess escape velocity from Saturn and can orbit the planet until lost by ionization or collision with Titan. It is predicted that a toroidal ring of between 1 and 1,000 atoms or molecules per cubic centimeter exists around Saturn at a distance of about 10 times the radius of the visible rings. This torus may be detectable from earth orbit and detection or nondetection of it may provide some information about the presence or absence of a Saturnian magnetic field, and the exospheric temperature and atmospheric escape rate of Titan. It is estimated that, if Titan has a large exosphere, 97% or more of the escaping atoms can be recaptured by Titan, thereby decreasing the effective net atmospheric loss rate by up to two orders of magnitude. It is shown that, if Saturn has a magnetic field comparable to Jupiter's the magnetospheric plasma can supply Titan with hydrogen at a rate comparable to the loss rates in some of the models of Trafton (1972) and Sagan (1973).

Mcdonough, T. R.↗

Ion streaming instabilities with application to collisionless shock wave structure

The electromagnetic dispersion relation for two counterstreaming ion beams of arbitrary relative strength flowing parallel to a dc magnetic field is derived. The beams flow through a stationary electron background and the dispersion relation in the fluid approximation is unaffected by the electron thermal pressure. Magnetic effects on the ion beams are included, but the electrons are treated as a magnetized fluid. The dispersion relation is solved with a zero net current condition applied and the regions of instability in the k-U space (U is the relative velocity between the two ion beams) are presented. These results are extensions of Kovner's analysis for weak beams. The parameters are then chosen to be applicable for parallel shocks. It is found that unstable waves with zero group velocity in the shock frame can exist near the leading edge of the shock for upstream Alfven Mach numbers greater than 5.5.

Golden, K. I.↗

An analysis and demonstration of clock synchronization by VLBI

A prototype of a semi-real time system for synchronizing the Deep Space Net station clocks by radio interferometry was successfully demonstrated on August 30, 1972. The system utilized an approximate maximum likelihood estimation procedure for processing the data, thereby achieving essentially optimum time sync estimates for a given amount of data, or equivalently, minimizing the amount of data required for reliable estimation. Synchronization accuracies as good as 100 ns rms were achieved between Deep Space Stations 11 and 12, both at Goldstone, Calif. The accuracy can be improved by increasing the system bandwidth until the fundamental limitations due to baseline and source position uncertainties and atmospheric effects are reached. These limitations are under 10 ns for transcontinental baselines.

Hurd, W. J.↗

Application of critical COD and plastic instability concepts to fracture of shells

The paper deals with the initiation, growth, and possible arrest of fracture in shell structures containing initial defects which may be approximated by an isolated part-through crack. The main study is restricted to the structures in which the net section of the shell wall around the defect zone is fully yielded. The problem is solved by using an 8th order shallow shell theory with a conventional plastic strip model to account for the plastic deformations. Using the critical COD or the plastic instability as fracture criterion, the results are applied to the fracture propagation and arrest in shells. The calculated results are then compared with those obtained from the experiments on zircaloy, aluminum, and steel pipes.

Erdogan, F.↗

Laser data links for communication satellites

Laser data relays potentially offer continuous 1 Gb/sec bandwidths, drastically increasing low-altitude satellite data collection capacity over present store-and-dump techniques. Availability of the laser link as a reliable alternative, operating within conventional low-altitude communication subsystem weight and power allocations, will create customer pressure for adoption. Major communication relay system impacts are discussed including reliability, mechanical design, attitude control, on-board data handling, contamination control, and traffic-net management. Interface parameters which drive the fundamental relay satellite design concepts are discussed, and conditions requiring early quantitative analysis are identified.

Ohern, W. L.↗

Cosmic ray nuclear composition above 20 GeV/nucleon

In three balloon flights during 1971 and 1972 a scintillator-Cerenkov counter telescope was exposed for a net total of 7.6 sq m-ster-hr to measure the charge composition of cosmic-ray nuclei. The telescope includes two gas Cerenkov counters for energy measurements above 20 GeV/nucleon. In this energy range about 3400 nuclei between Li and Fe have been detected and analyzed. The resulting charge composition and energy spectra are presented. The nuclear composition has been found to change with energy. The flux of galactic daughter nuclei decreases faster with increasing energy than the flux of source nuclei. The carbon/oxygen abundance ratio is significantly reduced as compared to low-energy measurements, and iron seems to exhibit a flatter energy spectrum than other nuclei.

Juliusson, E.↗

Fracture initiation and propagation in a cylindrical shell containing an initial surface flaw

An attempt is made to provide the necessary analytical tools for the application of two different types of fracture criteria to shell structures. Of particular interest is the problem of fracture propagation and arrest in a cylindrical pressure vessel containing an initial surface flaw. It is assumed that the flaw has the most unfavorable geometry and orientation, namely, it is a crack lying on a meridional plane. Stress intensity factor for a part-through crack, and a surface or internal crack with a fully yielded net ligament are considered. Attention is given to constant delta curves for depressurization studies and to depressurization and crack arrest in pressure vessels.

Erdogan, F.↗

Thermochemical water decomposition processes

Thermochemical processes which lead to the production of hydrogen and oxygen from water without the consumption of any other material have a number of advantages when compared to other processes such as water electrolysis. It is possible to operate a sequence of chemical steps with net work requirements equal to zero at temperatures well below the temperature required for water dissociation in a single step. Various types of procedures are discussed, giving attention to halide processes, reverse Deacon processes, iron oxide and carbon oxide processes, and metal and alkali metal processes. Economical questions are also considered.

Chao, R. E.↗