Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Effect of G-jitters on the stability of rotating bubble under microgravity environment

The instability of liquid and gas interface can be induced by the pressure of longitudinal and lateral accelerations, vehicle vibration, and rotational fields of spacecraft in a microgravity environment. Characteristics of slosh waves excited by the restoring force field of gravity jitters have been investigated. Results show that lower frequency gravity jitters excite slosh waves with higher ratio of maximum amplitude to wave length than that of the slosh waves generated by the higher frequency gravity jitters.

Hung, R. J.↗

A Non-Invasive Approach for Elucidating the Spatial Distribution of In-Situ Stress in Deep Subsurface Geologic Formations Considered for CO 2 Storage (Task 3 Report Laboratory Characterization of Stress Dependent Wavespeed)

This report presents a summary of Task 3 (Laboratory Experimental Characterization of Stress Dependent Wavespeed in Rocks and Application for In-Situ Stress Estimation) of the project titled “A Non-Invasive Approach for Elucidating the Spatial Distribution of In-Situ Stress in Deep Subsurface Geologic Formations Considered for CO 2 Storage”. The main objective of this component of the project was to employ non-destructive techniques to determine how compressional (P)-wave and shear (S)-wave propagation velocities are related to triaxial-stress conditions in laboratory test samples of targeted reservoir rocks. The overarching principle is that such laboratory measurements can provide a basis whereby field measurements of wave-propagation velocities in rocks can be used to ascertain the stress state that would be expected to generate the observed wave-propagation behavior.

58 GEOSCIENCES↗

Ulysses above the sun's south pole: an introduction

Ulysses has explored the field and particle environment of the sun's polar region. The solar wind speed was fast and nearly constant above -50 degrees latitude. Compositional differences were observed in slow (low-latitude) solar wind and in fast (high-latitude) solar wind. The radial magnetic field did not change with latitude, implying that polar cap magnetic fields are transported toward the equator. The intensity of galactic cosmic rays was nearly independent of latitude. Their access to the polar region is opposed by outward-traveling, large amplitude waves in the magnetic field.

Solar System↗

Observations of enhanced ion line frequency spectrum during Arecibo ionospheric modification experiment

The Arecibo 430 MHz incoherent scatter radar (ISR) was used to monitor the effects of modifying the ionosphere by a high power HF transmitter feeding the 305 m reflector antenna. When in the ordinary magnetoionic mode parametric instabilities develop in the ionosphere near the reflection level. Manifestations of these instabilities are the strong enhancement of Langmuir oscillations in the direction of the ISR beam at a wavelength of 35 cm and the simultaneous much weaker enhancement of ion oscillations in that direction. The spectral analysis of the enhanced peak with a height resolution of 2.4 km shows that the ionic mode enhancement most often has a double humped frequency spectrum corresponding to up- and down-going ion acoustic waves. The shape of the frequency spectrum is interpreted in terms of a stable oscillation which is driven by a secondary electrostatic field caused by nonlinear interaction of Langmuir waves within a cone centered on the magnetic field and by the scattering of the pump field on stable Langmuir waves travelling along the direction of the ISR.

Hagfors, T.↗

Theoretical Basis for Finite Difference Extrapolation of Sonic Boom Signatures

Calculation of sonic boom signatures for aircraft has traditionally followed the methods of Whitham' and Walkden. The wave disturbance generated by the vehicle is obtained by area rule linearized supersonic flow methods, which yield a locally axisymmetric asymptotic solution. This solution is acoustic in nature, i.e., first order in disturbance quantities, and corresponds to ray acoustics. Cumulative nonlinear distortion of the signature is incorporated by using this solution to adjust propagation speed to first order, thus yielding a solution second order in disturbance quantities. The effects of atmospheric gradients are treated by Blokhintzov's method of geometrical acoustics. Both nonlinear signature evolution and ray tracing are applied as if the pressure field very close to the vehicle were actually that given by the source term (the 'F-function') of the asymptotic linearized flow solution. The viewpoint is thus that the flow solution exists at a small radius near the vehicle, and may be treated as an input to an extrapolation procedure consisting of ray tracing and nonlinear aging. The F-function is often regarded as a representation of a near-field pressure signature, and it is common for computational implementations to treat it interchangeably with the pressure signature. There is a 'matching radius' between the source function and the subsequent propagation extrapolation. This viewpoint has been supported by wind tunnel tests of simple models, and very typically yields correct results for actual flight vehicles. The assumption that the F-function and near-field signature are interchangeable is generally not correct. The flowfield of a vehicle which is not axisymmetric contains crossflow components which are very significant at small radii and less so at larger distances. From an acoustical viewpoint, the crossflow is equivalent to source diffraction portions of the wave field. Use of the F-function as a near field signature effectively assumes that the diminution of the crossflow/diffraction component may be applied all at once at the matching radius noted above. This approximation, though not rigorously validated, is responsible for the usual correct far-field results. On the other hand, if an actual near-field signature (either from wind tunnel or CFD data) is used at a starting point rather than one based on th effective source distribution, the predicted far-field signature is generally wrong.

Plotkin, Kenneth J.↗

Plane waves at or near grazing incidence in the parabolic approximation

The parabolic approximation for the acoustic equations of motion is applied to the study of the sound field generated by a plane wave at or near grazing incidence to a finite impedance boundary. It is shown how this approximation accounts for effects neglected in the usual plane wave reflection analysis which, at grazing incidence, erroneously predicts complete cancellation of the incident field by the reflected field. Examples are presented which illustrate that the solution obtained by the parabolic approximation contains several of the physical phenomena known to occur in wave propagation near an absorbing boundary.

Mcaninch, G. L.↗

Comparison of deep space and near-earth observations of plasma turbulence at solar wind discontinuities

Simultaneous observations of plasma waves from the electric field instruments on Pioneer 9 and OGO 5 are used to illustrate the difference between near-earth and deep space conditions. It is shown that the experimental study of true interplanetary wave-particle interactions is difficult to carry out from an earth orbiter because the earth provides significant fluxes of nonthermal particles that generate intense plasma turbulence in the upstream region.

Scarf, F. L.↗

Magneto-atmospheric waves

A theoretical treatment of magneto-atmospheric waves is presented and applied to the modelling of waves in the solar atmosphere. The waves arise in compressible, stratified, electrically conductive atmospheres within gravitational fields when permeated by a magnetic field. Compression, buoyancy, and distortion of the magnetic field all contribute to the existence of the waves. Basic linearized equations are introduced to describe the waves and attention is given to plane-stratified atmospheres and their stability. A dispersion relation is defined for wave propagation in a plane-stratified atmosphere when there are no plane-wave solutions. Solutions are found for the full wave equation in the presence of either a vertical or a horizontal magnetic field. The theory is applied to describing waves in sunspots, in penumbrae, and flare-induced coronal disturbances.

Thomas, J. H.↗

Hypersonic shock wave interaction and impingement

An experimental investigation was conducted on space shuttle type, body-wing configurations. The purpose of the investigation was to determine the effects of body and wing geometry on the hypersonic shock structure about these vehicles and on the resulting surface impingement of interior flow field shock and expansion waves. Schlieren photographs and thermographic phosphor paint data were obtained on three body cross sections with three wing planforms at 40, 50 and 60 degree angles of attack. Specific configuration data were obtained at 0 and 30 degree angles of attack to develop trends. These data were obtained at a nominal Mach number of 13.5 and a freestream unit Reynolds number of 0.7 million per foot. For comparison with these straight wing configurations, data were also obtained on a model of a point design, high cross-range, delta wing orbiter at 40, 50 and 60 degree angles of attack. As expected, the data on this delta wing orbiter indicated that the shock intersection/impingement phenomena associated with straight wing vehicles are considerably more complex than, and result in both windward and leeward surface heating regions not present on, the delta configuration.

Kessler, W. C.↗

Microwave performance of a quarter-micrometer gate low-noise pseudomorphic InGaAs/AlGaAs modulation-doped field effect transistor

Excellent dc and millimeter-wave performance is reported in In0.15Ga0.85As/Al0.15Ga0.85As pseudomorphic modulation-doped field effect transistors (MODFET's) with 0.25-micron-length gates. Extrinsic transconductances as high as 495 mS/mm at 300 K and unprecedented power performance in the 60-GHz range were observed. Although not yet optimized, excellent low noise characteristics, 0.9 dB, with an associated gain of 10.4 dB at 18 GHz, and a noise figure of 2.4 dB with an associated gain of 4.4 dB at 62 GHz were obtained. This is the best noise performance ever reported for a MODFET in this frequency range. These results clearly demonstrate the superiority of pseudomorphic MODFET structures in high-frequency applications.

Henderson, T.↗

Plasma waves associated with diffuse auroral electrons at mid-altitudes

Using simultaneous observations from the DE-1 High-Altitude Plasma Instrument and the Plasma Wave Instrument, a study is made of 28 auroral-zone crossings, equally divided among dayside and nightside cases covering a range of Kp values from 1- to 8. In the diffuse auroral region, electrostatic emissions of frequencies up to a few kHz are associated with low-energy field-aligned electron beams. Of 18 cases (11 nightside; 7 dayside) examined at high resolution in the particle data, 15 (9 nightside; 6 dayside) exhibited field-aligned beams with electrostatic waves. In most cases, the beams were upward-directed, but occasionally they traveled both up and down the field line. The electrostatic emissions are interpreted as electron-acoustic waves excited by the field-aligned beams.

Sharber, J. R.↗

Electric Current Activated Combustion Synthesis and Chemical Ovens Under Terrestrial and Reduced Gravity Conditions

Combustion synthesis (CS) generally involves mixing reactants together (e.g., metal powders) and igniting the mixture. Typically, a reaction wave will pass through the sample. In field activated combustion synthesis (FACS), the addition of an electric field has a marked effect on the dynamics of wave propagation and on the nature, composition, and homogeneity of the product as well as capillary flow, mass-transport in porous media, and Marangoni flows, which are influenced by gravity. The objective is to understand the role of an electric field in CS reactions under conditions where gravity-related effects are suppressed or altered. The systems being studied are Ti+Al and Ti+3Al. Two different ignition orientations have been used to observe effects of gravity when one of the reactants becomes molten. This consequentially influences the position and concentration of the electric current, which in turn influences the entire process. Experiments have also been performed in microgravity conditions. This process has been named Microgravity Field Activated Combustion Synthesis (MFACS). Effects of gravity have been demonstrated, where the reaction wave temperature and velocity demonstrate considerable differences besides the changes of combustion mechanisms with the different high currents applied. Also the threshold for the formation of a stable reaction wave is increased under zero gravity conditions. Electric current was also utilized with a chemical oven technique, where inserts of aluminum with minute amounts of tungsten and tantalum were used to allow observation of effects of settling of the higher density solid particles in liquid aluminum at the present temperature profile and wave velocity of the reaction.

Unuvar, C.↗

Effect of Heave Plate Hydrodynamic Force Parameterization on a Two-Body Wave Energy Converter

Heave plates are one approach to generating the reaction force necessary to harvest energy from ocean waves. In a Morison equation description of the hydrodynamic force, the components of drag and added mass depend primarily on the heave plate oscillation. These terms may be parameterized in three ways: (1) as a single coefficient invariant across sea state, most accurate at the reference sea state, (2) coefficients dependent on the oscillation amplitude, but invariant in phase, that are most accurate for relatively small amplitude motions, and (3) coefficients dependent on both oscillation amplitude and phase, which are accurate for all oscillation amplitudes. We validate a MATLAB model for a two-body point absorber wave energy converter against field data and a dynamical model constructed in ProteusDS. We then use the MATLAB model to evaluate the effect of these parameterizations on estimates of heave plate motion, tension between the float and heave plate, and wave energy converter electrical power output. We find that power predictions using amplitude-dependent coefficients differ by up to 30% from models using invariant coefficients for regular waves ranging in height from 0.5 to 1.9 m. Amplitude- and phase-dependent coefficients, however, yield less than a 5% change when compared with coefficients dependent on amplitude only. This suggests that amplitude-dependent coefficients can be important for accurate wave energy converter modeling, but the added complexity of phase-dependent coefficients yields little further benefit. We show similar, though less pronounced, trends in maximum tether tension, but note that heave plate motion has only a weak dependence on coefficient fidelity. Finally, we emphasize the importance of using experimentally derived added mass over that calculated from boundary element methods, which can lead to substantial under-prediction of power output and peak tether tension.

dynamical model↗

Evanescent and inertial-like waves in rigidly rotating odd viscous liquids

Three-dimensional non-rotating odd viscous liquids give rise to Taylor columns and support axisymmetric inertial-like waves ( J. Fluid Mech ., vol. 973, 2023, A30). When an odd viscous liquid is subjected to rigid-body rotation however, there arise in addition a plethora of other phenomena that need to be clarified. In this paper, we show that three-dimensional incompressible or two-dimensional compressible odd viscous liquids, rotating rigidly with angular velocity 𝛺, give rise to both oscillatory and evanescent inertial-like waves or a combination thereof (which we call of mixed type) that can be non-axisymmetric. By evanescent, we mean that along the radial direction, typically when moving away from a solid boundary, the velocity field decreases exponentially. These waves precess in a prograde or retrograde manner with respect to the rotating frame. The oscillatory and evanescent waves resemble respectively the body and wall-modes observed in (non-odd) rotating Rayleigh–Bénard convection ( J. Fluid Mech ., vol. 248, 1993, pp. 583–604). We show that the three types of waves (wall, body or mixed) can be classified with respect to pairs of planar wavenumbers 𝜅 which are complex, real or a combination, respectively. Experimentally, by observing the precession rate of the patterns, it would be possible to determine the largely unknown values of the odd viscosity coefficients. This formulation recovers as special cases recent studies of equatorial or topological waves in two-dimensional odd viscous liquids which provided examples of the bulk–interface correspondence at frequencies 𝜔 < 2⁢𝛺. We finally point out that the two- and three-dimensional problems are formally equivalent. Their difference then lies in the way data propagate along characteristic rays in three dimensions, which we demonstrate by classifying the resulting Poincaré–Cartan equations.

Mechanics↗