SEARCH · Engineering Papers

Results for “variable selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Instrument for Solvent Extraction and Analysis (ISEE) of Organics from Regolith Simulant Using Supercritical Fluid Extraction and Chromatography

ISEE is an instrument with the potential to perform extractions from regolith found on the surface of asteroids and planets, followed by characterization and quantitation of the extracts using supercritical fluid extraction (SFE) and chromatography (SFC). SFE is a developed technique proven to extract a wide range of organic compounds. SFC is similar to High Performance Liquid Chromatography (HPLC) but has the advantage of performing chiral separations without needing to derivatize the chiral compounds. CO2 will be the solvent for both stages as it is readily available in the Mars atmosphere. ISEE will capture CO2 from the environment, and use it for SFE and SFC. If successful, this would allow ISEE to perform analysis of organic compounds without using consumables. This paper will present results on a preliminary, proof-of-principle effort to use SFE and SFC to extract and analyze lunar regolith simulant spiked with organic compounds representing a range of organics that ISEE would expect to characterize. An optimization of variables for the extraction of the organics from the spiked regolith was successfully developed, using 138 bar pressure and 40 C temperature. The extraction flow rate was optimized at 2% SLPM with 30% methanol modifier. The extractions were successful with a value of 77.3+/- 0.9% of organics extracted. However, the recovery of organics after the extraction was very low with only 48.5+/-14.2%. Moreover, three columns were selected to analyze multiple samples at a time; two of them are Viridis HSS C18 SB and Torus DIOL, and the third column, specific for chiral separations, has not yet been selected yet.

Franco, Carolina↗

NASA NTRS2019

A Double Bootstrap Approach to Superposed Epoch Analysis to Evaluate Response Uncertainty

The association between climate variability and episodic events, such as the antecedent moisture conditions prior to wildfire or the cooling following volcanic eruptions, is commonly assessed using Superposed Epoch Analysis (SEA). In SEA the epochal response is typically calculated as the average climate conditions prior to and following all event years or their deviation from climatology. However, the magnitude and significance of the inferred climate association may be sensitive to the selection or omission of individual key years, potentially resulting in a biased assessment of the relationship between these events and climate. Here we describe and test a modified double-bootstrap SEA that generates multiple unique draws of the key years and evaluates the sign, magnitude, and significance of event-climate relationships within a probabilistic framework. This multiple resampling helps quantify multiple uncertainties inherent in conventional applications of SEA within dendrochronology and paleoclimatology. We demonstrate our modified SEA by evaluating the volcanic cooling signal in a Northern Hemisphere tree-ring temperature reconstruction and the link between drought and wildfire events in the western United States. Finally, we make our Matlab and R code available to be adapted for future SEA applications.

Dendroclimatology↗

NASA NTRS1999

Probabilistic Structural Analysis Methods (PSAM) for Select Space Propulsion System Components

Probabilistic Structural Analysis Methods (PSAM) are described for the probabilistic structural analysis of engine components for current and future space propulsion systems. Components for these systems are subjected to stochastic thermomechanical launch loads. Uncertainties or randomness also occurs in material properties, structural geometry, and boundary conditions. Material property stochasticity, such as in modulus of elasticity or yield strength, exists in every structure and is a consequence of variations in material composition and manufacturing processes. Procedures are outlined for computing the probabilistic structural response or reliability of the structural components. The response variables include static or dynamic deflections, strains, and stresses at one or several locations, natural frequencies, fatigue or creep life, etc. Sample cases illustrates how the PSAM methods and codes simulate input uncertainties and compute probabilistic response or reliability using a finite element model with probabilistic methods.

Source record↗

NASA NTRS1971

Stress-corrosion cracking in metals

Criteria and recommended practices for preventing stress-corrosion cracking from impairing the structural integrity and flightworthiness of space vehicles are presented. The important variables affecting stress-corrosion cracking are considered to be the environment, including time and temperature; metal composition, and structure; and sustained tensile stress. For designing spacecraft structures that are free of stress-corrosion cracking for the service life of the vehicle the following rules apply: (1) identification and control of the environments to which the structure will be exposed during construction, storage, transportation, and use; (2) selection of alloy compositions and tempers which are resistant to stress-corrosion cracking in the identified environment; (3) control of fabrication and other processes which may introduce residual tensile stresses or damage the material; (4) limitation of the combined residual and applied tensile stresses to below the threshold stress level for the onset of cracking throughout the service life of the vehicle; and (5) establishment of a thorough inspection program.

Source record↗

NASA NTRS1977

Evidence for a structure-free state at high solar wind speeds

The variability of the basic solar wind flow parameters in highand low-speed flows is submitted to a statistical analysis. Particular attention is given to the uniformity of solar wind high-speed flow conditions by comparing them with those of the low-speed so-called quiet solar wind. With the exception of the solar wind bulk velocity, the average fractional variation of each of a selected sample of basic solar wind parameters is found to be substantially larger during low-speed flow conditions than during high-speed flow conditions at 1 AU. As a statistical ensemble of events, the only thing steady and uniform about low-speed conditions is the bulk velocity. In all other respects, high-speed flows form a much more uniform ensemble of solar wind conditions than do the low-speed flows. It is concluded that the use of average high-speed flow parameters for comparison with steady-state spherically symmetric models of the coronal expansion is meaningful.

Bame, S. J.↗

NASA NTRS1985

Thematic Mapper Data Quality and Performance Assessment in Renewable Resources/agriculture/remote Sensing

Analysis of the early thematic mapper (TM) data indicate the TM sensor and associated ground processing are performing equal to the high expectations and within advertised specifications. The overall TM system with improved resolution, together with additional and more optimumly placed spectral bands shows much promise for benefits in future analysis activities. By selecting man-made features of known dimensions (e.g., highways, airfields, buildings, and isolated water bodies), an assessment was made of the TM performance relative to the specified 30-meter (98-foot) resolution. The increase of spatial resolution of TM (30 m) over MSS (80 M) appears to be significant not only in resolving spectrally distinct classes that were previously undefinable but also in distinguishing within-field variability. An Important result of the early TM evaluation and pre-TM analyses was the development of an integrated system to receive LANDSAT-4 TM (as well as MSS) data and analyze the data via various approaches.

Bizzell, R. M.↗

NASA NTRS1992

Ceramic component reliability with the restructured NASA/CARES computer program

The Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design program on statistical fast fracture reliability and monolithic ceramic components is enhanced to include the use of a neutral data base, two-dimensional modeling, and variable problem size. The data base allows for the efficient transfer of element stresses, temperatures, and volumes/areas from the finite element output to the reliability analysis program. Elements are divided to insure a direct correspondence between the subelements and the Gaussian integration points. Two-dimensional modeling is accomplished by assessing the volume flaw reliability with shell elements. To demonstrate the improvements in the algorithm, example problems are selected from a round-robin conducted by WELFEP (WEakest Link failure probability prediction by Finite Element Postprocessors).

Powers, Lynn M.↗

NASA NTRS1992

Ceramic component reliability with the restructured NASA/CARES computer program

Powers, Lynn M.↗

NASA NTRS1993

COSMIC monthly progress report

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of August, 1993. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Ten articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) MOM3D - A Method of Moments Code for Electromagnetic Scattering (UNIX Version); (2) EM-Animate - Computer Program for Displaying and Animating the Steady-State Time-Harmonic Electromagnetic Near Field and Surface-Current Solutions; (3) MOM3D - A Method of Moments Code for Electromagnetic Scattering (IBM PC Version); (4) M414 - MIL-STD-414 Variable Sampling Procedures Computer Program; (5) MEDOF - Minimum Euclidean Distance Optimal Filter; (6) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (Macintosh Version); (7) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (IBM PC Version); (8) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (UNIX Version); (9) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (DEC VAX VMS Version); and (10) TFSSRA - Thick Frequency Selective Surface with Rectangular Apertures. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

Source record↗

NASA NTRSDate not supplied

Multiscale Modeling of Woven Ablative Thermal Protection System Materials

The NASA Entry Systems Modeling project maintains a portfolio of computational model and tool development activities focused on reducing performance uncertainties in ablative Thermal Protection System (TPS) materials for NASA missions. The development activities span material scale and strive to allow microstructural characterization of material structure and properties, mesoscale analyses of damage, and macroscale evaluation of heatshield performance and recession in a given aerothermodynamic environment. This talk will detail the application of developed capabilities at all three scales to the woven TPS material that the Agency has selected as the heatshield for the Mars Sample Return Earth Entry System (MSR-EES) mission – 3D Mid-Density Carbon Phenolic (3MDCP). Each of the applications focuses on driving down uncertainties in material performance and thus risk for MSR-EES and other future missions that may leverage woven TPS. At the microscale, machine learning techniques are used to characterize images from destructive microscopy and inform structural variability. At the mesoscale, Lagrangian techniques are used to simulate ballistic impact and interpret damage modes noted in experiments. At the macroscale, coupled flow-material response techniques are validated by Arc Jet testing to enable heatshield design for missions with massive ablation.

Justin B Haskins↗

NASA NTRS1985

Solar-induced oscillations in the stratosphere - A myth or reality?

Chandra (1984) has provided an assessment of the solar cycle ozone relationship based on seven years of Nimbus 4 BUV (backscattered ultraviolet) data. It was found that the globally averaged ozone in the upper stratosphere, when corrected for the changes in instrument sensitivity, decreased from 1970 to 1976 by 3-4 percent. This decrease is in accordance with the current estimates of solar UV variability over a solar cycle. The present investigation has the objective to determine if measured changes in ozone and temperature in the upper stratosphere on a time scale of a solar rotation are of solar origin, i.e., directly induced by changes in solar irradiance. The conducted study is based on the first two years (1970-1972) of ozone and temperature data obtained from the Nimbus 4 BUV and the Selective Chopper Radiometer (SCR) experiments. Attention is given to the response of the stratosphere to changes in solar activity associated with the 27-day solar rotation.

Chandra, S.↗

NASA NTRS1990

FIRE extended time/limited area observations at Palisades, New York

Downwelling shortwave and longwave irradiation are being continuously monitored at Palisades, New York as part of the First International Satellite Cloud Climatology Project (ISCCP) Regional Experiment (FIRE) Extended Time/Limited Area Initiative. In addition, fisheye (180 degree) sky photographs are taken at the times of NOAA 9 and LANDSAT satellite overpasses on select days, particularly when cirrus clouds are present. Measurements of incoming shortwave (0.28 to 2.80 microns) hemispheric and diffuse, hemispheric near infrared (0.7 to 2.80 microns), and downwelling hemispheric infrared (4.0 to 50.0 microns) irradiation have been made from a rooftop location on the grounds of the Lamont-Doherty Geological Observatory since December 1986. The three Eppley Precision Spectral Pyranometers and the Eppley Pyrgeometer used to measure these variables were calibrated with Colorado State University instruments at Madison, Wisconsin as part of the FIRE Intensive Laboratory. Pyrgeometer output contains an adjustment for body temperature but not for dome temperature. Data are transmitted to a Campbell CR-21 Digital Recorder, where one minute averages of ten second samples are stored and subsequently dumped to a cassette recorder. Using a Campbell C-20 Cassette Interface, these data are transferred to an Apple Macintosh computer for analysis and for archiving on floppy disks. In addition to the raw irradiances collected, variables derived from these data are generated and stored. These include: the ratio of near infrared irradiation to visible irradiation and the fraction of the full shortwave irradiation which is diffuse; and will soon include: shortwave transmissivity and optical depth in the shortwave. Sky photographs are taken with an Olympus OM2-N 35 mm camera and are timed to be coincident with overpassing NOAA and LANDSAT satellites. Palisades is within the field of view of the NOAA 9 daily in the middle to late afternoon. The satellite viewing angle is within 45 degrees of nadir over Palisades on approximately half of the passes.

Robinson, David A.↗

NASA NTRS2004

Nature and Variability of Coronal Streamers and Their Relationship to the Slow Speed Wind

NASA Grant NAGS12781 is a study on the "Nature and Variability of Coronal Streamers and their Relationship to the Slow Speed Wind." The two main goals of this study are to identify: I ) Where in the streamer structure does the solar wind originate, and 2 ) What coronal conditions are responsible for the variability of the slow speed wind. These goals are to be accomplished by carrying out the following activities: I ) Developing models for inferring the plasma outflow velocities in the extended solar corona based on UV spectroscopic and white light coronagraph data. 2 ) Producing UVCS Carrington Maps for the period around solar minimum 1996-1998. 3) Producing electron density profiles from the corresponding LASCO-C2 observations. 4) Identifying and selecting in situ data sets to be used for characterizing the solar wind from the streamers observed with UVCS. 5) Developing new visualization tools for using the UVCS synoptic data.

Strachan, Leonard↗

NASA NTRS2002

A management information system to study space diets

A management information system (MIS), including a database management system (DBMS) and a decision support system (DSS), was developed to dynamically analyze the variable nutritional content of foods grown and prepared in an Advanced Life Support System (ALSS) such as required for long-duration space missions. The DBMS was designed around the known nutritional content of a list of candidate crops and their prepared foods. The DSS was designed to determine the composition of the daily crew diet based on crop and nutritional information stored in the DBMS. Each of the selected food items was assumed to be harvested from a yet-to-be designed ALSS biomass production subsystem and further prepared in accompanying food preparation subsystems. The developed DBMS allows for the analysis of the nutrient composition of a sample 20-day diet for future Advanced Life Support missions and is able to determine the required quantities of food needed to satisfy the crew's daily consumption. In addition, based on published crop growth rates, the DBMS was able to calculate the required size of the biomass production area needed to satisfy the daily food requirements for the crew. Results from this study can be used to help design future ALSS for which the integration of various subsystems (e.g., biomass production, food preparation and consumption, and waste processing) is paramount for the success of the mission.

NASA Discipline Life Support Systems↗

NASA NTRS2016

In-Flight Personalized Medication Management

Current medication selection for treatment of astronauts during spaceflight missions is primarily dictated by the task of efficiently treating the widest possible range of physiological conditions and illnesses with a limited set of medications. Dosage and recommendations on the combination of drugs are based on the assumption of genetically equal drug sensitivity and unchanged metabolism. To our knowledge, there was no pre-flight drug sensitivity testing on a genetic level for any of the previous manned NASA space missions. Although many of the common, binary drug-drug interactions are, most likely, already considered in the ISS Medical kit composition, multi-drug and multi-drug-gene factors are not incorporated in the medication selection or prescription. Furthermore, due to the physiological changes occurring in microgravity environments, astronauts might be susceptible to potential increased drug toxicity as a result of decreased clearance of numerous drugs. In particular, perturbation of CYP450 enzymes which contribute to the hepatic metabolism of the majority of drugs may have significant effects on therapeutic efficacy and increase treatment-related toxicity5. The genes encoding the CYP450 enzymes are highly variable in humans. Inheritable variations of CYP450 hepatic metabolizer enzymes and transport proteins play a crucial role in the inter-individual variability of drug efficiency and risks of adverse drug reactions5. Additionally, there are some reports that document changes in the levels of production of drug-metabolizing enzymes in microgravity. These data can be extrapolated to provide reasonable assumptions of decreased levels of expression for most CYP450 enzymes in human body during prolonged space travel. If the prescribed medication regiment is not fully effective or causes undesirable side effects, the ability of the astronauts to function and maintain peak performance levels during space flight could be seriously compromised. Therefore, technologies capable of predicting and managing medication side effects, interactions, and toxicity of drugs during spaceflight are needed. We propose to develop and customize for NASAs applications available on the market Personalized Prescribing System (PPS) that would provide a comprehensive, non-invasive solution for safer, targeted medication management for every crew member resulting in safer and more effective treatment and, consequently, better performance. PPS will function as both decision support and record-keeping tool for flight surgeons and astronauts in applying the recommended medications for situations arising in flight. The information on individual drug sensitivity will translate into personalized risk assessment for adverse drug reactions and treatment failures for each drug from the medication kit as well as predefined outcome of any combination of them. Dosage recommendations will also be made individually. The mobile app will facilitate ease of use by crew and medical professionals during training and flight missions.

Personalized Medication↗

NASA NTRSDate not supplied

Microgreens Food Safety Evaluation

Microgreens have been recently identified as a new type of pick and eat salad crop that can be utilized in space crop production systems. The majority of traditionally grown leafy green crops can be grown as microgreens, in addition to crops such as legumes (e.g. pea shoots), sunflower, buckwheat, most herbs, and corn, presenting hundreds of microgreen crop options. With a wide variety of flavors, exceptional nutritional density, short growth cycles (7-14 days), and unmatched volume optimization potential, microgreens present as an interesting option for sustainable production of nutritious and flavorful crops in space. The food safety aspects of microgreens have been investigated by USDA in recent years, however, an assessment for crew consumption purposes has not yet been conducted to capture the variety of microgreen cultivar types grown in spaceflight relevant environmental conditions and hardware that could be a part of the astronaut diet. Seed sanitation methods will be developed for each microgreen cultivar to sanitize the seed coat and ensure viable germination and plant growth. Food safety analysis will be performed on 24 different fast-growing cultivars of microgreens by performing aerobic plate counts (APC), fungal counts, and select pathogen screening of edible plant tissue before and after treatment with ProSan sanitizing produce wash. Additional avenues of investigation into microgreens food safety will be undertaken to understand impacts of plant height at time of harvest (able to be manipulated by light spectrum), seed density at time of planting, and role of blue light in food safety metrics of microgreens (n=6-12 microgreen cultivars tested, depending on variable). These findings will be included in the Space Crop Production Hazard Analysis Critical Control Point (HACCP) plan. This new work is currently postponed due to Covid-19.

M E Hummerick↗

NASA NTRSDate not supplied

Promoted Combustion Behavior of 316 Stainless Steel and 6061 Aluminum Alloys in Elevated Pressure Nitrox Environments

Promoted combustion testing (outlined in the ASTM G124 “Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen Enriched Atmospheres”) refers to a useful testing method to evaluate how metallic materials will behave when combusted in environments with high oxygen concentrations, elevated pressure, or both. These tests yield data which is useful for engineers and scientists from a variety of industries who need and rely on oxygen systems. Oxygen Compatibility Assessments (OCA’s) are vital for ensuring that materials will be safe for use, and these assessments rely on data from OCA’s or interpolation if a desired pressure/concentration is outside of previously tested bounds. It was identified that these bounds leave out significant areas of data for materials which are tested at high pressures (above 1500 psi) and variable oxygen concentrations (with nitrogen as the diluent gas). For this reason, the authors posited that conducting promoted combustion testing on materials above 1500 psi and in various concentrations of oxygen would be incredibly useful in future analyses for oxygen compatibility with similar environments (such as breathing air) as well as for further understanding of how materials behave at very high pressures (such as 10000 psi). Two materials were selected which are commonly used in industry today - 316 stainless steel and 6061 aluminum – and they were tested and analyzed for the purposes of this study.

oxygen compatibility↗

NASA NTRS1980

Polynomial striction algorithms in the detection and determination of the characteristics of non-stationary phenomena

The effectiveness of the algorithm of polynomial striction of the data is examined, and the selection of an algorithm is carried out, according to the results of measurements of the components of the permanent magnetic field in communication sequences from the Venera-9 space vehicle, where the shock waves were recorded. It is shown that the most effective algorithm, according to the coefficient of striction, is the algorithm of the zero order interpolator. Also examined is the increase in effectiveness with the introduction of a variable threshold of comparison. The root-mean-square deviation of the error of regeneration of the data with various thresholds is calculated, and qualitative analysis of the distortions is carried out, having shown a considerable change in the form of the small discontinuities, which may be interpreted as potential interplanetary shock waves.

Yevdokimov, V. P.↗