Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Proof-of-concept studies of novel protocols for producing highly pure 48 V from a 48 Cr/ 48 V generator

Here, the quest to improve the quality of nuclear data, such as half-lives, transition yields, and reaction cross-sections, is a shared endeavor among various areas of nuclear science. 48 V is a vanadium isotope for which experimental data on neutron reaction cross-sections is needed. However, traditional isotope production techniques cannot produce 48 V with high enough isotopic purity for some of these measurements. “Isotope harvesting” at the Facility for Rare Isotope Beams (FRIB) is a new isotope production technique that could potentially yield 48 V with the necessary purity for such studies. In this case, 48Cr would be collected and allowed to generate 48 V that can be separated from undecayed 48 Cr to yield highly pure 48 V. Thus, any protocol for producing pure 48 V via isotope harvesting would involve utilizing a separation technique that can effectively separate 48 Cr and 48 V. In this study, the radiotracers 51 Cr and 48 V were used to develop possible radiochemical separation methodologies, which can be translated to obtain high purity 48 V via this novel isotope production method. The developed protocols utilize either ion exchange or extraction chromatographic resins. Separations of 51 Cr and 48 V with AG 1-X8 anion exchange resin respectively resulted in recoveries of 95.6(26)% and 96.2(12)% with radionuclidic purities of 92(2)% and 99(1)%. An even more effective Cr and V separation was obtained with an extraction chromatographic resin (TRU resin) and 10 M HNO 3 loading solution. Here, 51 Cr and 48 V respectively had recoveries of 94.1(28)% and 96.2(13)% with high radionuclidic purities (100(2)% and 100(1)%) in small volumes (8.81(8) mL and 5.39(16) mL). This study suggests that, to maximize the yield and isotopic purity of 48 V, the best production protocol would involve utilizing two separations with TRU resin and 10 M HNO 3 to isolate 48 Cr and purify the generated 48 V.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Machine learning-assisted design of metal–organic frameworks for hydrogen storage: A high-throughput screening and experimental approach

Various theoretical approaches, including big data and high-throughput screening techniques, have been explored in developing new materials due to their significant potential time-saving advantages. However, it remains a significant challenge to experimentally realize new materials that are predicted. In this study, we propose a novel materials design strategy that utilizes machine-learning (ML) techniques to predict new porous materials that show promise for hydrogen storage and are likely to be feasible to synthesize. By leveraging ML techniques and metal–organic framework (MOF) databases, we are able to predict the synthesizability of MOF structures. This is evidenced by the successful synthesis of a new vanadium-based MOF that exhibits excellent performance for cryogenic H 2 storage. Notably, the total gravimetric and volumetric H 2 uptakes are as high as 9.0 wt% and 50.0 g/L at 77 K and 150 bar. This ML-assisted materials design offers an efficient and promising approach for developing hydrogen storage materials.

08 HYDROGEN↗

Computational materials assessment of the D/Li-stripping neutron source as a prototypical facility for fusion materials testing

As the US fusion materials community awaits the selection and design of a fusion prototypical neutron source (FPNS), a risk reduction exercise has been conducted to (i) provide an updated materials performance evaluation using state-of-the-art computational materials modeling, (ii) expand on legacy analysis based on pure Fe to other relevant fusion structural materials types, and (iii) ensure that materials response under FPNS operational conditions is consistent with referential fusion reactor conditions. The current paper describes the efforts undertaken to assemble a comprehensive computational methodology that includes neutronics, primary damage calculations, atomistic simulations of displacement cascades, chemical inventory evolution calculations, and a computational thermodynamic analysis of emerging phases during irradiation. Our work extends existing studies in pure Fe to reduced-activation ferritic/martensitic steels, tungsten, silicon carbide, and vanadium alloys. We focus on the single-beam deuteron/lithium-stripping neutron source behind the IFMIF-DONES concept, which we assess against ITER, two DEMO designs, and an ideal pure 14-MeV flux. Our analysis indicates that, within standard uncertainties inherent to the models employed, the DONES concept adequately captures fusion conditions in the four materials analyzed. Our work is intended as a comprehensive irradiation damage analysis of fusion-representative neutron sources, to be used for further neutron source evaluation and fusion facility operation.

Marian, Jaime [Univ. of California, Los Angeles, C↗

THESEUS: A techno-economic design, integration and downselection framework for energy storage

Optimal selection of energy storage technologies is critical to ensure reliable integration of intermittent and often uncertain renewable energy in electricity grids. The consideration of a diverse set of energy storage technologies is required for a more sustainable deployment of energy storage. We present THESEUS (TecHno-Economic framework for Systematic Energy storage Utilization and downSelection), which is a comprehensive framework for the optimal selection, design and operation of energy storage systems. THESEUS includes rigorous models of major energy storage technologies at different maturity levels, such as thermal storage using phase-change materials or molten salt, cryogenic storage, mechanical storage in the form of compressed air and pumped hydro storage, chemical storage using hydrogen, and electrochemical storage in the form of lithium-ion, sodium sulfur and vanadium flow batteries. An illustrative case study on state-wide prospective energy storage shows that storage integration with fossil power plants could reduce the cost of meeting the grid energy demand by 20%, with mechanical storage as the best suited technology. Although high-temperature thermal storage has low storage efficiency, it is optimal for integration with renewable energy plants. In addition, Li-ion batteries are optimal for high ramping but low storage duration requirements. Furthermore, such insights can enable the deployment of both existing and emerging energy storage technologies to facilitate a smooth transition to a clean energy future.

25 ENERGY STORAGE↗

Species- and element-specific patterns of metal flux from contaminated wetlands versus metals shed with exuviae in emerging dragonflies

Dragonfly adults and their aquatic immature stages are important parts of food webs and provide a link between aquatic and terrestrial components. During emergence, contaminants can be exported into terrestrial food webs as immature adults fly away or be shed with their exuviae and remain in the wetland. Our previous work established metals accumulating in dragonfly nymphs throughout a contaminated constructed wetland designed to regulate pH and sequester trace metals from an industrial effluent line. In this paper we evaluated the concentration and mass of metals leaving the wetland in flying emergents versus remaining in the wetland with the shed exuviae in 10 species of dragonflies belonging to 8 genera. Nine elements (Cu, Zn, Cd, Mn, V, Mg, Fe, Al, Pb) were evaluated that include essential and nonessential elements as well as trace and major metals. Metal concentrations in the emergent body and exuviae can differ by orders of magnitude. Aluminum, Fe, Mn, and Pb were largely shed in the exuviae. Vanadium and Cd were more variable among species but also tended to be shed with the exuviae. In contrast, Cu, Zn, and Mg showed a higher tendency to leave the wetland with an emerging dragonfly. Metals shed in dragonfly exuviae can moderate the transport of metals from contaminated wetlands. Taxonomic- and metal-specific variability in daily metal flux from the wetland depended upon concentration accumulated, individual body mass, and number of individuals emerging, with each factor's relative importance often differing among species. This illustrates the importance of evaluating the mass of metals in an individual and not only concentrations. Furthermore, differences in numbers of each species emerging will magnify differences in individual metal flux when calculating community metal flux. A better understanding of the variability of metal accumulation in nymphs/larvae and metal shedding during metamorphosis among both metals and species is needed.

54 ENVIRONMENTAL SCIENCES↗

Simultaneous exposure to neutron radiation and hydrogen environment: Effect on hydrogen retention

Here, this study demonstrates a novel methodology that simultaneously exposes materials to both neutron irradiation and a hydrogen environment, enabling study on in pile interaction between radiation-induced defects and hydrogen in tungsten. The hydrogen environment was established by releasing hydrogen from vanadium hydride within an irradiation capsule. The hydrogen pressure during irradiation was estimated as 14.2 Torr. Post-irradiation thermal desorption spectroscopy analysis showed increased hydrogen retention in irradiated tungsten compared to unirradiated samples. Two dominant desorption peaks at ∼470 °C and ∼700 °C were observed in irradiated and unirradiated tungsten samples, suggesting similar trapping mechanisms between the two samples. However, an additional desorption peak at ∼800 °C in irradiated tungsten from the hydride capsule suggests an interplay between irradiation induced defects and hydrogen exposure, leading to the formation of additional hydrogen trapping sites. These findings provide critical insights into hydrogen retention in tungsten under fusion-relevant conditions and stimulate future studies to investigate the synergistic effects of neutron irradiation and hydrogen exposure.

08 HYDROGEN↗

Assessment of Combustion Residual Leachate Volume, Composition, and Treatment Costs

Combustion residuals and the resulting leachate from storage sites represent a large volume of wastewater in the United States (U.S.) that has not been quantified. Here this work estimates the constituents present, volume of wastewater, and costs of treatment for both combustion residual landfill leachate and the leachate from surface impoundment closures. Combustion residual landfill leachate produced from contact with bituminous coal combustion byproducts is generally predicted to be higher in lithium and manganese, whereas landfill leachate produced from contact with subbituminous coal combustion byproducts is generally predicted to be higher in mercury and vanadium. The annual volume of a single landfill with combustion residual leachate can reach more than 800,000 cubic meters. This leachate represents an annual volume of 26.8–42.8 million cubic meters nationally. Closing surface impoundments can yield between 830 and 1040 cubic meters of leachate nationally for a three-year closure period. Costs as low as $1.5/m 3 or as high as $95/m 3 are observed. Treatment trains will need to remove 72% of total suspended solids (TSS), 87% of arsenic, and 64% of mercury from landfill leachate. When applied to impoundments, these treatment trains would need to remove 97% of arsenic.

01 COAL, LIGNITE, AND PEAT↗

A novel design of transitional layer structure between reduced activation ferritic martensitic steels and tungsten for plasma facing materials

Plasma-facing components (PFCs) are among the most critical gaps for fusion energy to establish technical and economic feasibility. Tungsten as a first wall/blanket material in PFCs requires to be integrating with reduced activation ferritic martensitic (RAFM) steels as a structural component. Currently, major drawbacks are the requirement of brazing, the formation of a brittle interface, and a large difference between the coefficients of thermal expansion of tungsten and steel. Here, a novel transitional multilayer structure was designed and investigated to join tungsten and RAFM steels using three interlayers. The composition of each interlayer was selected based on computational thermodynamics and diffusion kinetics to ensure a body-centered cubic (bcc) single-phase structure and prevent the formation of a brittle intermetallic phase region in the temperature range of 600–1150 °C. Although the transitional layer structure was designed for additive manufacturing, spark plasma sintering (SPS) as proof of concept was used to bond the individual layers. Interfaces were investigated using scanning and transmission electron microscopy methods but no layered intermetallic phase was observed. Nanoindentation maps across the interface suggest major hardness differences at the interface between tungsten and the vanadium interlayer, as well as the interface between RAFM steel and the FeCrAl interlayer.

36 MATERIALS SCIENCE↗

X-ray absorption and Raman spectroscopy studies of molybdenum environments in borosilicate waste glasses

Mo-containing high-level nuclear waste borosilicate glasses were investigated as part of an effort to improve Mo loading while avoiding yellow phase crystallization. Previous work showed that additions of vanadium decrease yellow phase formation and increases Mo solubility. X-ray absorption spectroscopy (XAS) and Raman spectroscopy were used to characterize Mo environments in HLW borosilicate glasses and to investigate possible structural relationships between Mo and V. Mo XAS spectra for the glasses indicate isolated tetrahedral Mo6+O4 with Mo-O distances near 1.75 Å. V XANES indicate tetrahedral V5+O4 as the dominant species. Raman spectra show composition dependent trends, where Mo-O symmetrical stretch mode frequencies (ν1) are sensitive to the mix of alkali and alkaline earth cations, decreasing by up to 10 cm-1 for glasses that change from Li+ to Na+ as the dominant network-modifying species. This indicates that MoO4 tetrahedra are isolated from the borosilicate network and are surrounded, at least partly, by Na+ and Li+. Secondary ν1 frequency effects, with changes up to 7 cm-1, were also observed with increasing V2O5 and MoO3 content. These secondary trends may indicate MoO4-MoO4 and MoO4-VO4 clustering, suggesting that V additions may stabilize Mo in the matrix with respect to yellow phase formation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization and qualification of neutron radiation effects – Summary of Japan-USA Joint Projects for 40 years

The Joint Projects under the Japan-USA Fusion Cooperation Program started in 1981 and has continued for more than 40 years. In the Joint Projects, although a wide range of fusion materials and engineering issues were covered, neutron radiation effects on fusion reactor materials have always been the major research emphases, and the neutron irradiation facilities in the US were jointly used by Japanese and US researchers. Japanese test facilities including neutron and charged particle irradiation facilities were complementarily used. Here, the initial focus of the Joint Projects was on fundamental fusion neutron radiation effects and irradiation correlation. Systematic comparison of fission and fusion radiation effects in comparable damage levels and the effects of transmutation-induced helium were investigated. The collaboration was then focused on the effect of dynamic irradiation effects in variable conditions. In addition to the relatively fundamental studies, the Joint Projects contributed largely to development of candidate materials such as RAFM steels, vanadium alloys, SiC/SiC composites, and tungsten alloys, through a mechanism-oriented approach. The Joint Projects also covered issues specific to materials application to fusion blankets and plasma-facing components, including neutron radiation effects such as tritium retention and permeation of neutron-irradiated plasma-facing materials. Various irradiation technologies were developed and applied to the irradiation experiments, including those for in-situ testing.Considering that high energy neutron sources, such as A-FNS and IFMIF-DONES, now have high viability, the research supporting the neutron source programs is essential. The knowledge obtained through the Joint Projects is valuable and should be advanced for this purpose. To this end, it is of urgent necessity to launch an international scientific program accumulating knowledge of fusion neutron radiation effects, including their fundamental aspects.

36 MATERIALS SCIENCE↗

Imaging of the Li spatial distribution within V 2 O 5 cathode in a coin cell by neutron computed tomography

An understanding of Lithium (Li) spatial distribution within the electrodes of a Li-ion cell, during charge and discharge cycles, is essential to optimize the electrode parameters for increased performance under cycling. In this work, it is demonstrated that the spatial distribution of Li within Vanadium Pentoxide (V 2 O 5 ) electrodes of a small coin cell can be imaged by neutron computed tomography. The neutron attenuation data has been used to construct the three-dimensional Li spatial images. Specifically, it is shown that there is sufficient neutron imaging contrast between lithiated and delithiated regions of V 2 O 5 electrode making it possible to map Li distributions even in small electrodes with thicknesses <1 mm. The images reveal that the Li spatial distribution is inhomogeneous and a relatively higher C-rate leads to more non-uniform Li distribution after Li insertion. The non-uniform distribution suggests the limitation of Li diffusion within the electrode during the lithiation process under the relatively high cycling rates.

25 ENERGY STORAGE↗

Physics-constrained deep neural network method for estimating parameters in a redox flow battery

Here, in this paper, we present a physics-constrained deep neural network (PCDNN) method for parameter estimation in the zero-dimensional (0D) model of the vanadium redox flow battery (VRFB). In this approach, we use deep neural networks to approximate the model parameters as functions of the operating conditions. This method allows the integration of VRFB computational models as the physical constraints in the parameter learning process, leading to enhanced accuracy of parameter estimation and cell voltage prediction. Using an experimental dataset, we demonstrate that the PCDNN method can estimate model parameters for a range of operating conditions and improve the 0D model prediction of voltage compared to the 0D model prediction with constant operation-condition-independent parameters estimated with traditional inverse methods. We also demonstrate that the PCDNN approach has an improved generalization ability for estimating parameter values for operating conditions not used in the training process.

25 ENERGY STORAGE↗

Physics-informed CoKriging model of a redox flow battery

Vanadium redox flow batteries (VRFBs) offer the capability to store large amounts of energy cheaply and efficiently, however, there is a need for fast and accurate models of the charge–discharge curve of a VRFB to potentially improve the battery capacity and performance. Here, we develop a multifidelity model for predicting the charge–discharge curve of a VRFB. In the multifidelity model, we use the Physics-informed CoKriging (CoPhIK) machine learning method that is trained on experimental data and constrained by the so-called “zero-dimensional” physics-based model. Here we demonstrate that the model shows good agreement with experimental results and significant improvements over existing zero-dimensional models. We show that the proposed model is robust as it is not sensitive to the input parameters in the zero-dimensional model. We also show that only a small amount of high-fidelity experimental datasets are needed for accurate predictions for the range of considered input parameters, which include current density, flow rate, and initial concentrations.

25 ENERGY STORAGE↗

Physics-informed machine learning of redox flow battery based on a two-dimensional unit cell model

In this paper, we present a physics-informed neural network (PINN) approach for predicting the performance of an all-vanadium redox flow battery, with its physics constraints enforced by a two-dimensional (2D) mathematical model. The 2D model, which includes 6 governing equations and 24 boundary conditions, provides a detailed representation of the electrochemical reactions, mass transport and hydrodynamics occurring inside the redox flow battery. To solve the 2D model with the PINN approach, a composite neural network is employed to approximate species concentration and potentials; the input and output are normalized according to prior knowledge of the battery system; the governing equations and boundary conditions are first scaled to an order of magnitude around 1, and then further balanced with a self-weighting method. Our numerical results show that the PINN is able to predict cell voltage correctly, but the prediction of potentials shows a constant-like shift. To fix the shift, the PINN is enhanced by further constrains derived from the current collector boundary. Finally, we show that the enhanced PINN can be even further improved if a small number of labeled data is available.

25 ENERGY STORAGE↗

Measuring the oscillator strength of intercombination lines of helium-like V ions in a laser-produced-plasma

In this work, we present results of measurements of the oscillator strength of intercombination lines of He-like Vanadium ions in high energy density (HED) laser-produced-plasmas and compare them with the simulations from commonly used codes and data from the NIST database. Whilst not yet sufficiently accurate to constrain different trusted atomic-physics models for the particular system studied, our results are in agreement with the available data within experimental error bars, yet differ from cruder approximations of the oscillator strength used in certain atomic-kinetics packages, suggesting that this general method could be further extended to be used as a measurement of the oscillator strength of additional atomic transitions under the extreme conditions that are achieved in HED experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystal, electronic structure and electronic transport properties of the Ti{sub 1-x}V{sub x}NiSn (x=0-0.10) solid solutions

The n-TiNiSn ternary intermetallic semiconductor is doped by the V donor impurity and the crystalline structure of the obtained Ti{sub 1-x}V{sub x}NiSn solid solutions (x=0-0.10) is determined by X-ray diffraction. Temperature and concentration dependences of the resistivity and thermopower are investigated in 80-380 K range. As main results, the TiNiSn conductivity type is revealed insensitive to V doping and the thermopower factor substantially increases versus V content. First principle calculations based on DFT using FPLO and KKR-CPA methods are performed as well. Experimental data and electronic structure calculations are compared and discussed in terms of thermopower improvements. -- Graphical abstract: Both approaches experimental and calculations point to the same conclusions. Resisitivity, power factor and thermopower estimations indicate that doping of TiNiSn based compound by the V induces insulator-metal transition without change of the negative sign of S thermopower. Vanadium is revealed as donor impurity.

36 MATERIALS SCIENCE↗

Physical and electrochemical properties of alkaline earth doped, rare earth vanadates

The effect of partial substitution of alkaline earth (AE) ions, Sr{sup 2+} and Ca{sup 2+}, for the rare earth (RE) ions, La{sup 3+}, Ce{sup 3+}, Pr{sup 3+}, and Sm{sup 3+}, on the physical properties of REVO{sub 4} compounds were investigated. The use of the Pechini method to synthesize the vanadates allowed for high levels of AE substitution to be obtained. Coulometric titration was used to measure redox isotherms for these materials and showed that the addition of the AE ions increased both reducibility and electronic conductivity under typical solid oxide fuel cell (SOFC) anode conditions, through the formation of compounds with mixed vanadium valence. In spite of their high electronic conductivity, REVO{sub 4}-yttira stabilized zirconia (YSZ) composite anodes exhibited only modest performance when used in SOFCs operating with H{sub 2} fuel at 973 K due to their low catalytic activity. High performance was obtained, however, after the addition of a small amount of catalytically active Pd to the anode. - Graphical abstract: Coulometric titration isotherms for ({open_square}) LaVO{sub 4}, ( White-Circle ) PrVO{sub 4}, ( Lozenge ) CeVO{sub 4}, ( Black-Up-Pointing-Triangle ) Ce{sub 0.7}Sr{sub 0.3}VO{sub 3.85}, and ( Black-Square ) Ce{sub 0.7}Ca{sub 0.3}VO{sub 3.85}, at 973 K. Highlights: Black-Right-Pointing-Pointer Infiltration procedures were used to prepare SOFC anodes from various vanadates. Black-Right-Pointing-Pointer Doping of Alkaline Earth to Rare Earth Vanadates showed to improve conductivity and chemical stability. Black-Right-Pointing-Pointer Alkaline Earth Doped Rare Earth Vanadates-YSZ composites showed conductivities as high as 5 S cm{sup -1} at 973 K. Black-Right-Pointing-Pointer As with other ceramic anodes, the addition of a catalyst was required to achieve low anode impedance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and physical properties of single crystal PrCr{sub 2}Al{sub 20} and CeM{sub 2}Al{sub 20} (M=V, Cr): A comparison of compounds adopting the CeCr{sub 2}Al{sub 20} structure type

Crystal growth and full structure determination of compounds adopting the CeCr{sub 2}Al{sub 20} structure type, LnTi{sub 2}Al{sub 20} (Ln=La-Pr, Sm, and Yb), LnV{sub 2}Al{sub 20} (Ln=La-Pr, and Sm), and LnCr{sub 2}Al{sub 20} (Ln=La-Pr, Sm, and Yb), are reported. Resistivity, magnetic susceptibility, and heat capacity of flux grown single crystals of the nonmagnetic CeM{sub 2}Al{sub 20} (Ln=Ce, Yb; M=Ti, V) compounds are compared to PrCr{sub 2}Al{sub 20}. Of particular interest is PrCr{sub 2}Al{sub 20} which does not show any phase transition down to the lowest temperature of the measurement (400 mK in resistivity measurement and 1.8 K for magnetic susceptibility measurements) and exhibits Kondo behavior at low temperatures. - Graphical abstract: Crystal structure of SmV{sub 2}Al{sub 20} showing the interpenetrating diamond-like samarium network and pyrochlore-like vanadium network. Highlights: Black-Right-Pointing-Pointer Single crystals of LnM{sub 2}Al{sub 20} were grown from a molten aluminum flux. Black-Right-Pointing-Pointer Magnetic, electrical, and specific heat of single crystal LnM{sub 2}Al{sub 20} are presented. Black-Right-Pointing-Pointer PrCr{sub 2}Al{sub 20} exhibits evidence of Kondo effect.

36 MATERIALS SCIENCE↗