Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Design procedures for fiber composite structural components: Rods, columns and beam columns

Step by step procedures are described which are used to design structural components (rods, columns, and beam columns) subjected to steady state mechanical loads and hydrothermal environments. Illustrative examples are presented for structural components designed for static tensile and compressive loads, and fatigue as well as for moisture and temperature effects. Each example is set up as a sample design illustrating the detailed steps that are used to design similar components.

Chamis, C. C.↗
NASA NTRS1983

Description of the computations and pilot procedures for planning fuel-conservative descents with a small programmable calculator

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. The flight management descent algorithm and the vertical performance modeling required for the DC-10 airplane is described.

Vicroy, D. D.↗
NASA NTRS1982

Detection of the 1400 A absorption in the ultraviolet spectrum of the DA white dwarf LB 3303

Low-resolution ultraviolet International Ultraviolet Explorer spectra of the southern white dwarf LB 3303 show the presence of the wavelength 1400 absorption feature reported by Greenstein in the spectrum of 40 Eri B. The equivalent width is 5.7 A, and the measured wavelength is 1394 A. A comparison of the ultraviolet fluxes with model atmospheres confirms that LB 3303 has an effective temperature near 16,000 K, as found earlier from visual wavelength data. There are still problems with the identification of this line. The star is not hot enough to explain the presence of Si IV, and the agreement with the spectrum of the H2 molecule is not convincing.

Wegner, G.↗
NASA NTRS1982

The IUE spectrum of BD + 39 deg 4926

IUE spectra of the A- or F-type supergiant BD + 39 deg 4926 have been combined with existing optical data. Comparison with model atmospheres yields an effective temperature of 7750 K, gravity log g of 0.5, and a reddening corresponding to E(B-V) of 0.15. The Mg II wavelength 2800 feature was used to estimate the abundance of Mg(+), and the value of log (epsilon (Mg(+)/epsilon (Ca(+)) was found to be about 2.7.

Saha, A.↗
NASA NTRS1983

Discovery of 13.5 s X-ray pulsations from LMC X-4 and an orbital determination

X-ray pulsations with a 13.5-sec period have been detected from the 1.4-d X-ray binary LMC X-4. By measuring the apparent pulse period at several binary orbital phases, and assuming the orbit to be nearly circular, the semimajor axis of the orbit is determined to be 30 + or - 5 ly-sec. This result, together with a revised orbital velocity amplitude of 37.9 + or - 2.4 km/sec, and other available information, suffice for the determination of the component masses of the binary system and the radius of the companion star. The mass of the neutron star is found to be 1.6 +1.0 -0.5 solar masses, while the mass, radius, and effective temperature of the companion star indicate that it may be undermassive for its luminosity.

Kelley, R. L.↗
NASA NTRS1982

Thermonuclear runaways in thick hydrogen rich envelopes of neutron stars

A Lagrangian, fully implicit, one-dimensional hydrodynamic computer code is used to evolve thermonuclear runaways in the accreted hydrogen-rich envelopes of 1.0-solar-mass neutron stars with radii of 10 km and 20 km. The simulations produce outbursts lasting from approximately 750 seconds to approximately one week. The peak effective temperatures and luminosities are 2.6 x 10 to the 7th K and 8 x 10 to the 4th solar luminosities for the 10 km study and 5.3 x 10 to the 6th K and 600 solar luminosities for the 20 km study. It is found that hydrodynamic expansion on the 10 km neutron star produced a precursor lasting approximately 0.0001 second. The study assumes that the bursters and transient X-ray sources occur as a result of mass transfer from a secondary onto a neutron star in a fashion analogous to the nova phenomena. The peak temperatures and luminosities are found to be inversely proportional to the radius of the neutron stars and the calculations here, together with those in the literature, indicate that the actual radii of most neutron stars must be closer to 10 km than 20 km.

Starrfield, S.↗
NASA NTRS1982

P/n/ velocity and cooling of the continental lithosphere

The average upper mantle compressional wave velocity and heat flow figures presently computed for continental physiographic provinces in North America exhibit an inverse relationship, and possess a statistically significant correlation coefficient. A correlation is also demonstrated between compressional wave velocity and material temperature by estimating crust-mantle boundary temperatures from heat flow values. The dependency of compressional wave velocity on temperature implies that the observed geographical distribution in upper mantle seismic velocity may be due to the temperature effect character of upper mantle compressional wave velocity variation.

Black, P. R.↗
NASA NTRS1983

Resin selection criteria for tough composite structures

Resin selection criteria are derived using a structured methodology consisting of an upward integrated mechanistic theory and its inverse (top-down structured theory). These criteria are expressed in a 'criteria selection space' which can be used to identify resin bulk properties for improved composite 'toughness'. The resin selection criteria correlate with a variety of experimental data including laminate strength, elevated temperature effects and impact resistance.

Chamis, C. C.↗
NASA NTRS1983

A compact hydrogen maser with exceptional long-term stability

A passive hydrogen maser employing a smaller microwave cavity than previous masers is described. The volume of the entire resonator package, including a conventional source, hexapole state selector, and four magnetic shields, is estimated at 20 liters. The techniques for constructing the ceramic cavity, coating it with FEP, and attaching the endcaps to achieve a stable container (to allow its use as a single vacuum system) are described in detail. Frequency stability measurements were made of four such masers, against an NBS-4 cesium primary standard, against each other, and against eight commercial cesium clocks; frequency stability level is reported as 1.7 x 10 to the -12th tau exp -1/2 from 1 to 100,000 sec, and no drift above 1 x 10 to the -15th/day was found. Pressure and temperature effects on frequency stability were found at the 1 x 10 to the -14th level. Noise behavior beyond 200,000 sec is characterized as random walk. The potential use of a compact stable maser as a clock is suggested.

Howe, D. A.↗
NASA NTRS1983

Possible evidence for the driving of the winds of hot stars by Alfven waves

Ultraviolet spectra of the supergiants Alpha Cam (09.5 Ia), HD 105056 (ON9.7 Iae), and 15 Sgr (O9.7 Iab) are compared, and it is shown that the terminal outflow velocity, TOV, of HD 105056 is one-half that of the other two stars even though HD 105056 has the highest effective temperature of the three stars. This anomaly, together with the fact that the observed TOV values for early-type stars scatter about an empirical correlation between TOV and log T(eff) by an amount which is larger than the amount expected according to the observational errors in determining TOV and log T(eff), leads to the conclusion that an agent in addition to radiation, Alfven waves, is driving the winds of early-type stars.

Underhill, A. B.↗
NASA NTRS1983

The C2H, C2, and CN electronic absorption bands in the carbon star HD 19557

Infrared spectrophotometry of the R-type carbon star HD 19557 is presented. Two unusual spectroscopic features are seen: a 3.1 micron band is lacking and a 2.8 micron band is present. Identifications are proposed for three previously unreported stellar absorption bands with electronic sequences of C2, CN, and C2H. The latter is proposed to be responsible for the 2.8 micron feature. The atmospheric structure of the star is studied with synthetic spectra, and an effective temperature between 2600 K and 3000 K is suggested. No SiC emission is seen at 11.3 microns, indicating that grain formation is not a viable process around the star. The lack of dust in R stars may suggest a salient difference between R and N types.

Goebel, J. H.↗
NASA NTRS1983

HL Tauri and its circumstellar disk

New far infrared observations of HL Tau which support the identification of an edge-on disk surrounding the star are presented. A bolometric luminosity for the star of 7.2 solar luminosities and a ratio of infrared to optical luminosity of 630 are indicated. A circumstellar A(V) of about 7.0 mag is produced, consistent with the silicate optical depth to the star. Data on HL Tau's effective temperature and radius and its position on the HR diagram suggest that the star has recently completed its accretion phase and is only 100,000 yr old. The column masses of ice and silicates are combined with the disk dimensions to build a simple model of the disk for comparison with the primitive solar nebula. Estimates of the far-infrared emitting mass provide independent probes of the mass in larger grains around HL Tau.

Cohen, M.↗
NASA NTRS1983

Resin selection criteria for tough composite structures

Resin selection criteria are derived using a structured methodology consisting of an upward integrated mechanistic theory and its inverse (top-down structured theory). These criteria are expressed in a "criteria selection space" which are used to identify resin bulk properties for improved composite "toughness". The resin selection criteria correlate with a variety of experimental data including laminate strength, elevated temperature effects and impact resistance.

Chamis, C. C.↗
NASA NTRS1983

Material characterization of structural adhesives in the lap shear mode

A general method for characterizing structural adhesives in the bonded lap shear mode is proposed. Two approaches in the form of semi-empirical and theoretical approaches are used. The semi-empirical approach includes Ludwik's and Zhurkov's equations to describe respectively, the failure stresses in the constant strain rate and constant stress loading modes with the inclusion of the temperature effects. The theoretical approach is used to describe adhesive shear stress-strain behavior with the use of viscoelastic or nonlinear elastic constitutive equations. Three different model adhesives are used in the simple lap shear mode with titanium adherends. These adhesives (one of which was developed at NASA Langley Research Center) are currently considered by NASA for possible aerospace applications. Use of different model adhesives helps in assessment of the generality of the method.

Schenck, S. C.↗
NASA NTRS1983

The winds and coronae of early-type stars

The properties of the winds of hot stars as derived from radio, ultraviolet and X-ray observations is presented. Special focus is given to observations that test line driven wind theory. In this theory the wind properties are determined by the stellar effective temperature and surface gravity, but not parameters that specify the mechanical or wave fluxes from the star. Alternate explanations of the X-ray emission from the early-type stars are discussed. Evidence is given for the presence of coronal zones at the base of the stellar winds.

Cassinelli, J. P.↗
NASA NTRS1983

Recording and reproduction of microwave holograms using a scanning procedure and their subsequent optical processing

Intensity distributions in nonoptical wave fields can be visualized and stored on photosensitive material. In the case of microwaves, temperature effects can be utilized with the aid of liquid crystals to visualize intensity distributions. Particular advantages for the study of intensity distributions in microwave fields presents a scanning procedure in which a microcomputer is employed for the control of a probe and the storage of the measured data. The present investigation is concerned with the employment of such a scanning procedure for the recording and the reproduction of microwave holograms. The scanning procedure makes use of an approach discussed by Farhat, et al. (1973). An eight-bit microprocessor with 64 kBytes of RAM is employed together with a diskette storage system.

Hetsch, J.↗
NASA NTRS1983

Composite structural materials

Progress and plans are reported for investigations of: (1) the mechanical properties of high performance carbon fibers; (2) fatigue in composite materials; (3) moisture and temperature effects on the mechanical properties of graphite-epoxy laminates; (4) the theory of inhomogeneous swelling in epoxy resin; (5) numerical studies of the micromechanics of composite fracture; (6) free edge failures of composite laminates; (7) analysis of unbalanced laminates; (8) compact lug design; (9) quantification of Saint-Venant's principles for a general prismatic member; (10) variation of resin properties through the thickness of cured samples; and (11) the wing fuselage ensemble of the RP-1 and RP-2 sailplanes.

Ansell, G. S.↗
NASA NTRS1984

User's manual for a fuel-conservative descent planning algorithm implemented on a small programmable calculator

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. An explanation and examples of how the algorithm is used, as well as a detailed flow chart and listing of the algorithm are contained.

Vicroy, D. D.↗