Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

X-ray diffraction and X-ray standing-wave study of the lead stearate film structure

A new approach to the study of the structural quality of crystals is proposed. It is based on the use of X-ray standing-wave method without measuring secondary processes and considers the multiwave interaction of diffraction reflections corresponding to different harmonics of the same crystallographic reflection. A theory of multiwave X-ray diffraction is developed to calculate the rocking curves in the X-ray diffraction scheme under consideration for a long-period quasi-one-dimensional crystal. This phase-sensitive method is used to study the structure of a multilayer lead stearate film on a silicon substrate. Some specific structural features are revealed for the surface layer of the thin film, which are most likely due to the tilt of the upper layer molecules with respect to the external normal to the film surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of Cu/Ni Nanowires Obtained by Matrix Synthesis

The structure of layered Cu/Ni nanowires obtained by template synthesis in 100-nm channels of track membranes has been investigated by transmission and scanning electron microscopy. The phase composition and main structural features of individual nanowires are determined. It is shown that nanowires consist of alternating Ni (Fm3m) and Cu (Fm3m) layers with grains up to 100 nm in size. It is found that nanowires contain also copper oxide crystallites up to 20 nm in size. The elemental composition of individual layers and their mutual arrangement are determined.

36 MATERIALS SCIENCE↗

Role of magnetism in the formation of a short-range order in iron-silicon alloys

The formation of a short-range order in soft magnetic Fe-Si alloys depending on the annealing temperature has been investigated theoretically and experimentally. The B2-type short-range order has been observed in samples quenched from temperatures T > T{sub C} (where T{sub C} is the Curie temperature) with the content c{sub Si} close to the boundary of the two-phase region. Annealing at temperatures T < T{sub C} for the content c{sub Si} {>=} 0.08 leads to an increase in the fraction of regions with the D0{sub 3}-type short-range order. The mechanism of the formation of the short-range order in Fe-Si solid solutions has been analyzed by the Monte Carlo simulation with the ab initio calculated interatomic interaction parameters. It has been shown that the energy of the effective Si-Si interaction in bcc iron strongly depends on the magnetic state of the matrix. As a result, the B2-type short-range order is formed at T > T{sub C} and is fixed at quenching, whereas the D0{sub 3}-type shortrange order is equilibrium in the ferromagnetic state. The results reveal the decisive role of magnetism in the formation of the short-range order in Fe-Si alloys and allow the explanation of the observed structural features of the alloys depending on the composition and temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear-optical and structural properties of nanocrystalline silicon carbide films

The aim of this study is to investigate the nonlinearity of refraction in nanostructured silicon carbide films depending on their structural features (synthesis conditions for such films, substrate temperature during their deposition, concentration of the crystalline phase in the film, Si/C ratio of atomic concentrations in the film, and size of SiC nanocrystals formed in the film). The corresponding dependences are obtained, as well as the values of nonlinear-optical third-order susceptibility {chi}{sup (3)}({omega}; {omega}, -{omega}, {omega}) for various silicon polytypes (3C, 21R, and 27R) which exceed the value of {chi}{sup (3)} in bulk silicon carbide single crystals by four orders of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of the {sup 6}He nucleus in the three-particle model

The properties of the {sup 6}He nucleus were investigated in a three-particle approximation (a alpha-particle cluster plus two neutrons) on the basis of the variational approach by using a Gaussian basis. For nn and n{alpha} interactions, potentials that make it possible to describe S-wave phase shifts for elastic scattering and, simultaneously, to reproduce faithfully the energy and the size of the {sup 6}He nucleus were proposed. Characteristic structural features of this nucleus that are manifested in the density distributions, elastic form factor, pair correlation functions, and momentum distributions of particles constituting the {sup 6}He nucleus in the three-particle model were revealed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modified version of the combined model of photonucleon reactions

A refined version of the combined photonucleon-reaction model is described. This version makes it possible to take into account the effect of structural features of the doorway dipole state on photonucleon reactions in the energy range of E{sub γ} ≤ 30 MeV. In relation to the previous version of the model, the treatment of isospin effects at the preequilibrium and evaporation reaction stages is refined; in addition, the description of the semidirect effect caused by nucleon emission from the doorway dipole state is improved. The model in question is used to study photonucleon reactions on the isotopes {sup 35-56}Ca and {sup 102-134}Sn in the energy range indicated above.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elemental Analysis of Beryllium Samples Using a Microzond-EGP-10 Unit

Results concerning the structural and elemental analysis of beryllium samples obtained via different technologies using a Microzond-EGP-10 unit with the help of the PIXE and RBS methods are presented. As a result, the overall chemical composition and the nature of inclusions were determined. The mapping method made it possible to reveal the structural features of beryllium samples: to select the grains of the main substance having different size and chemical composition, to visualize the interfaces between the regions of different composition, and to describe the features of the distribution of impurities in the samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissociation of relativistic {sup 10}B nuclei in nuclear track emulsion

The structural features of {sup 10}B are studied by analyzing the dissociation of nuclei of this isotope at an energy of 1 A GeV in nuclear track emulsion. The fraction of the {sup 10}B → 2He + H channel in the charge state distribution of fragments is 78%. It was determined based on the measurements of fragment emission angles that unstable {sup 8}Be{sub g.s.} nuclei appear with a probability of (26 ± 4)%, and (14 ± 3)% of them are produced in decays of an unstable {sup 9}B{sub g.s.} nucleus. The Be + H channel was suppressed to approximately 1%.

74 ATOMIC AND MOLECULAR PHYSICS↗

New CHOD detector for the NA62 experiment at CERN

The New CHOD is a scintillation hodoscope with a pad structure featuring a total of 148 counters. The signal from each pad is read out using wavelength-shifting fibers and two or four SensL SiPMs with a sensitive area of 3 × 3 mm{sup 2}. This photodetector has 4774 pixels 35 × 35 μm{sup 2} in size. The key parameters (photon detection efficiency, dark current, crosstalk, and gain) were measured for 500 SiPMs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-temperature nuclear-detector arrays based on 4 H-SiC ion-implantation-doped p{sup +}-n junctions

Results obtained in a study of spectrometric characteristics of arrays of four detectors based on 4H-SiC ion-implantation-doped p{sup +}-n junctions in the temperature range 25-140 Degree-Sign C are reported for the first time. The junctions were fabricated by ion implantation of aluminum into epitaxial 4H-SiC layers of thickness {<=}45 {mu}m, grown by chemical vapor deposition with uncompensated donor concentration N{sub d} - N{sub a} = (4-6) Multiplication-Sign 10{sup 14} cm{sup -3}. The structural features of the ion-implantation-doped p{sup +}-layers were studied by secondary-ion mass spectrometry, transmission electron microscopy, and Rutherford backscattering spectroscopy in the channeling mode. Parameters of the diode arrays were determined by testing in air with natural-decay alpha particles with an energy of 3.76 MeV. The previously obtained data for similar single detectors were experimentally confirmed: the basic characteristics of the detector arrays, the charge collection efficiency and energy resolution, are improved as the working temperature increases.

36 MATERIALS SCIENCE↗

Study of optical parameters of the Se-As chalcogenide semiconductor system containing EuF{sub 3} impurities

Optical properties of chalcogenide vitreous semiconductors of composition Se{sub 95}As{sub 5} containing different amounts of rare-earth metal fluorides (EuF{sub 3}) are studied, and, on this basis, the fundamental parameters, such as the refractive index and extinction coefficient, are determined. The dependences of these parameters on the content of EuF{sub 3} molecules are nonmonotonic: the low content (below 0.25 at %) aids in decreasing the parameters, whereas the high content tends to increase them. From the analysis of the results with consideration for the structural features of chalcogenide vitreous semiconductors of the Se{sub 95}As{sub 5} system (the presence of ordered high-coordinated microregions separated from each other by regions with a lower atomic density), it is concluded that the optical properties of the chalcogenide vitreous semiconductor system under study can be described in the context of Penn's model.

36 MATERIALS SCIENCE↗

Properties of Sb{sub 2}S{sub 3} and Sb{sub 2}Se{sub 3} thin films obtained by pulsed laser ablation

The properties of Sb{sub 2}S{sub 3} and Sb{sub 2}Se{sub 3} thin films of variable thickness deposited onto Al{sub 2}O{sub 3}, Si, and KCl substrates are investigated by the method of pulsed laser ablation. The samples are obtained at a substrate temperature of 180 Degree-Sign C in a vacuum chamber with a residual pressure of 10{sup -5} Torr. The thickness of the films amounted to 40-1500 nm. The structure of the bulk material of the targets and films is investigated by the methods of X-ray diffraction and transmission high-energy electron diffraction, respectively. The electrical properties of the films are investigated in the temperature range of 253-310 K. It is shown that the films have semiconductor properties. The structural features of the films determine their optical parameters.

36 MATERIALS SCIENCE↗

Synchrotron study of the formation of nanoclusters in Al{sub 2}O{sub 3}/SiO{sub x}/Al{sub 2}O{sub 3}/SiO{sub x}/ Horizontal-Ellipsis /Si(100) multilayer nanostructures

Al{sub 2}O{sub 3}/SiO{sub x}/Al{sub 2}O{sub 3}/SiO{sub x}/ Horizontal-Ellipsis /Si(100) multilayer nanoperiodic structures (MNS) are studied by X-ray absorption near-edge structure spectroscopy (XANES). Experimental XANES spectroscopy spectra are obtained using synchrotron radiation. The formation of Si nanoclusters in the surface layers of the structures during their high-temperature annealing is observed. The structures featured intense size-dependent photoluminescence in the wavelength region near 800 nm. At the same time, it is shown that the formation of aluminum silicates is possible. The inversion effect of the intensity of the XANES spectra during the interaction of synchrotron radiation with MNSs is revealed.

36 MATERIALS SCIENCE↗

Spatial redistribution of radiation in flip-chip photodiodes based on InAsSbP/InAs double heterostructures

The spatial distribution of equilibrium and nonequilibrium (including luminescent) IR (infrared) radiation in flip-chip photodiodes based on InAsSbP/InAs double heterostructures (λ{sub max} = 3.4 μm) is measured and analyzed; the structural features of the photodiodes, including the reflective properties of the ohmic contacts, are taken into account. Optical area enhancement due to multiple internal reflection in photodiodes with different geometric characteristics is estimated.

36 MATERIALS SCIENCE↗

Structure of thermoelectric films of higher manganese silicide on silicon according to electron microscopy data

The structural features of higher manganese-silicide films obtained by the diffusion doping of single-crystal silicon substrates with manganese vapor in a sealed cell and a flow-through quartz reactor with continuous pumping are comparatively analyzed. Scanning electron microscopy and high-resolution transmission electron microscopy show that a single-phase textured film of higher manganese silicide is formed in the evacuated cell. A change in the growth conditions from steady (cell) to quasi-steady-state (reactor) leads to the formation of polycrystalline islands of higher manganese silicide with nanoscale inclusions of the manganese- monosilicide phase.

36 MATERIALS SCIENCE↗

Study of the Effective Refractive Index Profile in Self-Assembling Nanostructured ITO Films

The optical characteristics and structural features of self-assembling nanostructured indium–tin oxide (ITO) films deposited onto substrates heated above 400°C are studied. Estimations of the distribution profiles of the material and effective refractive index in the films under study are obtained by computer simulation of a medium having spectral dependences of light transmission and reflection coefficients closest to those observed in the experiment. These results are in good agreement with scanning electron microscopy data for these films and make it possible to not only confirm the gradient character of such coatings but also restore some of its features. The further overgrowth of voids in self-assembling nanostructured films by means of the deposition of an additional material amount by magnetron sputtering at room temperature leads to a variation in the effective refractive index profile in them. Thus, it is possible to form transparent conductive films with an efficient refractive index profile adjusted for specific tasks. Adjustment of the refractive index profile in self-assembled ITO films acquires a special value for designing coatings with specified properties by virtue of a limited set of transparent conductive materials.

36 MATERIALS SCIENCE↗

Kinetics of Early Decomposition Stages in Diluted bcc Fe–Сu–Ni–Al Alloy: MC+MD Simulation

A combined approach including the Monte Carlo and molecular-dynamics simulation, decomposition kinetics and segregation formation in the multicomponent low-alloy Fe–1.5Cu–2Ni–1.5Al (at %) alloy is studied. It is shown that the formation of Cu nanoparticles surface-enriched with Ni and Al (coprecipitation mode) includes several stages: (i) the formation of clusters consisting of several Cu atoms, (ii) their enrichment with Ni and Al atoms, and (iii) redistribution of Ni and Al atoms with the formation of a surface layer providing stabilization of Cu nanoparticles. Observed structural features of segregations and their stability in Fe–Cu–Ni–Al alloys is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Hydrogenation on the Structure, Magnetic and Magnetocaloric Properties of Tb–Dy–Co Alloys with a Laves Phase Structure

A complex study of structure, phase composition, surface topology, magnetic, and magnetocaloric properties was performed for TbCo{sub 2} and Tb{sub 0.3}Dy{sub 0.7}Co{sub 2} compounds and for a Tb{sub 0.3}Dy{sub 0.7}Co{sub 2}H{sub 0.5} hydride with a low hydrogen content. The hydrogenation was established to impact the structural features at the micro- and nanolevels, as well as the fundamental and functional properties. Introducing even a small amount of hydrogen in the crystal lattice of Tb{sub 0.3}Dy{sub 0.7}Co{sub 2} compound is found to cause an increase in both the Curie temperature and the magnetic moment at the cobalt atoms. The magnetic phase transition from the paramagnetic to the magnetically ordered state changes from the first (in Tb{sub 0.3}Dy{sub 0.7}Co{sub 2}) to the second (in TbCo{sub 2} and Tb{sub 0.3}Dy{sub 0.7}Co{sub 2}H{sub 0.5}) order, leading to a noticeable decrease in the magnetocaloric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗