Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Alite-ye'elimite cement: Synthesis and mineralogical analysis

Alite-ye'elimite cement is an alternative cement that combines desirable characteristics of calcium sulfoaluminate cements and Portland cement in that it shows improved strength development at early age while retaining high portlandite contents. The key problem in the clinkering process is to produce the alite-ye'elimite phase assemblage so that both phases can co-exist. In this study, a new synthesis method is proposed to achieve the coexistence of alite and ye'elimite consisting of a secondary heat treatment step at 1250 °C after regular Portland clinker firing at 1450 °C. Quantitative X-ray powder diffraction and electron microscopy were used to analyze the phase composition of clinker before and after the secondary heat treatment. The results show that ye'elimite develops during secondary heat treatment of calcium sulphate enriched clinker by reaction of C{sub 3}A and sulphate phases. Additional ferrite is formed as result of rejection of Fe originally in solid solution with C{sub 3}A during ye'elimite formation.

36 MATERIALS SCIENCE↗

Growth of K(Cl, Br) crystals from aqueous solutions in an X-ray field

The influence of X-rays of different wavelength on the degree of structural quality of K(Cl, Br) crystals of mixed composition grown from aqueous solutions is considered. It is found by the methods of chemical etching, X-ray analysis, pycnometric density, and atomic-force microscopy that X-ray irradiation leads to the formation of crystals with a more perfect substructure and surface morphology and a decrease of the dislocation density and concentration of pores and cavities containing the mother liquor. It is shown that X-ray irradiation can promote preferential incorporation of less electronegative components into the crystal lattice of a solid solution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the optimization of asymmetric barrier layers in InAlGaAs/AlGaAs laser heterostructures on GaAs substrates

Band offsets at the heterointerface are calculated for various combinations of InAlGaAs/AlGaAs heteropairs that can be synthesized on GaAs substrates in the layer-by-layer pseudomorphic growth mode. Patterns which make it possible to obtain an asymmetric barrier layer providing the almost obstruction-free transport of holes and the highest possible barrier height for electrons are found. The optimal compositions of both compounds (In{sup 0.232}Al{sup 0.594}Ga{sup 0.174}As/Al{sup 0.355}Ga{sup 0.645}As) at which the flux of electrons across the barrier is at a minimum are determined with consideration for the critical thickness of the indium-containing quaternary solid solution.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of yttria stabilized ZrO{sub 2} nanoparticles in subcritical and supercritical water using a flow reaction system

Yttria stabilized zirconia nanoparticles have been prepared by hydrothermal flow reaction system under subcritical and supercritical conditions. ZrO(NO{sub 3}){sub 2}/Y(NO{sub 3}){sub 3} mixed solutions were used as starting materials. Reaction temperature was 300-400 deg. C. Reaction time was adjusted to 0.17-0.35 s. Based on the residual Zr and Y concentrations, the complete conversion of zirconium was achieved irrespective of pH and hydrothermal temperature, whereas the conversion of yttrium increased with an increase in pH and hydrothermal temperature. Stoichiometric solid solution was achieved at pH>8. XRD results revealed that tetragonal zirconia can be formed regardless of yttrium content, where the tetragonality was confirmed by Raman spectroscopy. The average particle size estimated from BET surface area was around 4-6 nm. Dynamic light scattering particle size increased with the solution pH owing to the aggregation of primary particles. TG-DTA analyses revealed that weight losses for adsorbed water and hydroxyl groups decreased with hydrothermal temperature. - Graphical abstract: Nanoparticles of YSZ can be synthesized in subcritical and supercritical water using a hydrothermal flow reaction system. Given is the TEM image of YSZ nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Initial precipitation and hardening mechanism during non-isothermal aging in an Al–Mg–Si–Cu 6005A alloy

The characterization of precipitation and hardening mechanism during non-isothermal aging had been investigated using high resolution transmission electron microscopy for an Al–Mg–Si–Cu 6005A alloy. It was proposed that the needle-shaped β″ precipitates with a three-dimension coherency strain-field and an increased number density in the Al matrix provided the maximum strengthening effect for the Al–Mg–Si–Cu 6005A alloy. Simultaneously, it was also found that the formation and evolution of clusters in the early precipitation were associated with the vacancy binding energy, during which Si atoms played an important role in controlling the numbers density of Mg/Si co-clusters, and the excess Si atoms provided the increased number of nucleation sites for the subsequent precipitates to strengthen and improve the precipitation rate. Finally, based on the experimental observation and theoretical analysis, the precipitation sequence during the early precipitation in the Al–Mg–Si–Cu 6005A alloy was proposed as: supersaturated solid solution → Si-vacancy pairs, Mg-vacancy pairs and Mg clusters → Si clusters, and dissolution of Mg clusters → Mg atoms diffusion into the existing Si clusters → Mg/Si co-clusters → GP zone. - Highlights: • β″ precipitates provide the maximum strengthening effect for the 6005A alloy. • Si atoms play an important role in controlling the numbers of Mg/Si co-clusters. • The early aging sequence is deduced based on the solute-vacancy binding energy.

36 MATERIALS SCIENCE↗

Influence of Zn on magnetocaloric effect in (0.95)La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} ceramic composites

Highlights: • Synthesis of magnetic ceramic composites. • Magnetization of dual phase ceramics. • Magnetic entropy change in (0.95)La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/(0.05)Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} solid solution. - Abstract: We report the magnetic and magnetocaloric properties of (0.95)La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/(0.05)Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.0, 0.1, 0.3, and 0.5) ceramic composites. The composite samples with nominal compositions were prepared using the conventional solid-state reaction method. The phase purity and structure were confirmed by using X-ray diffraction. Temperature dependent magnetization measurements and Arrott analysis reveal second order of magnetic phase transition in the composite samples. A maximum in magnetic entropy change of ∼0.75 J/kg K at 1 T has been observed in (0.95)La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/(0.05)NiFe{sub 2}O{sub 4} sample. The values of magnetic entropy change of these composites make them attractive for potential applications. These composite samples may consider as potential material for magnetic refrigeration near room temperature.

36 MATERIALS SCIENCE↗

Generalized large-scale synthesis of MTiO{sub 3} (M = Ba, Sr, Pb) nanocrystals

A general hydrothermal synthesis technique has been developed for the large-scale preparation of perovskite oxide nanocrystals of BaTiO{sub 3} (BT), SrTiO{sub 3} (ST) and PbTiO{sub 3} (PT). X-ray diffraction pattern (XRD) and Raman spectrum revealed that tetragonal BT was successfully synthesized. The obtained ST and PT were in cubic and tetragonal phase, respectively. Scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM) images showed that all of the products were on nanometer scale. These nanocrystals should provide an ideal candidate for fundamental studies of nanoscale ferroelectricity, piezoelectricity, and paraelectricity. Meanwhile, the synthetic strategy may be easily extended to prepare other nearly monodispersed nanocrystals of perovskite oxides or solid solutions. The relative studies are in progress and will be reported later.

36 MATERIALS SCIENCE↗

The problem of intermixing of metals possessing no mutual solubility upon explosion welding (Cu-Ta, Fe-Ag, Al-Ta)

On the basis of the results obtained for joints of dissimilar metals such as copper-tantalum and iron-silver, the reason of immiscible suspensions mixing upon explosion welding has been cleared out. It has been found that the interface (plain or wavy) is not smooth and contains inhomogeneities, namely, cusps and local melting zones. The role of granulating fragmentation providing partitioning of initial materials as a main channel of input energy dissipation has been revealed. It has been shown that in joints of metals possessing normal solubility the local melting zones are true solutions, but if metals possess no mutual solubility the local melting zones are colloidal solutions. Realization of either emulsion or suspension variant takes place. The results can be used in the development of new joints of metals possessing no mutual solubility. - Highlights: Black-Right-Pointing-Pointer Immiscible pairs Ta/Cu and Fe/Ag are welded successfully by explosive welding. Black-Right-Pointing-Pointer Fragmentation provides for partitioning as the main energy dissipation channel. Black-Right-Pointing-Pointer Immiscible metals form colloidal solid solutions during solidification. Black-Right-Pointing-Pointer Melting and boiling temperatures ratio determines the colloidal solution type. Black-Right-Pointing-Pointer Local melting zones being in suspension form enhance welds hardening.

36 MATERIALS SCIENCE↗

Microstructure evolution and mechanical characterization of Nd:YAG laser beam welded titanium tubes

Highlights: • Joining of thin titanium tubes using laser beam welding. • Fusion zone exhibited coarse granular like grains with serrated and irregular boundaries. • Large spherical and irregular shape pores were observed at lower welding speeds. • Misorientation angle distribution indicated substructure boundaries along with single β grain formation from double α grains. • Fusion zone strengthened by substructure boundaries, solid solution strengthening and dislocation density. - Abstract: Grade 2 titanium tubes of outer diameter 60 mm and wall thickness 3.9 mm were effectively joined by Nd:YAG laser. The welding speed was varied in five levels (2.50, 2.75, 3.00, 3.25 and 3.50 m/min). The microstructure evolution was studied using optical microscopy and advanced characterization techniques. The bead geometry changed from parallel shape to wedge shape with increased welding speed due to changes in surface tension. The macrographs showed three zones namely fusion zone, heat affected zone (HAZ) and base metal. Coarse granular structure with irregular and serrated contours was observed in the fusion zone. Acicular α grains were observed at the extreme outer edge of the fusion zone due to rapid cooling. Spherical and irregular shaped pores were observed near the centerline of the fusion zone at lower welding speeds due to large amount of entrapped gases and downward sweeping solidification front. The grain size decreased with increased welding speed due to higher cooling rate. The misorientation angle distribution map showed three distinct regions. The increase in welding speed caused an increase in low angle boundaries and a reduction in very high angle boundaries. High density of dislocations was observed in the fusion zone due to thermal stresses caused by solidification. The microhardness of the fusion zone was recorded to be higher than base metal due to substructure boundaries, solute elements and dislocations. The increase in welding speed shifted the fracture location from fusion zone to base metal and fracture mode from brittle to ductile.

36 MATERIALS SCIENCE↗

Electrical and optical properties of Ta-Si-N thin films deposited by reactive magnetron sputtering

The electrical and optical properties of Ta{sub x}Si{sub y}N{sub z} thin films deposited by reactive magnetron sputtering from individual Ta and Si targets were studied in order to investigate the effects of nitrogen and silicon contents on both properties and their correlation to the film microstructure. Three sets of fcc-Ta{sub x}Si{sub y}N{sub z} thin films were prepared: sub-stoichiometric Ta{sub x}Si{sub y}N{sub 0.44}, nearly stoichiometric Ta{sub x}Si{sub y}N{sub 0.5}, and over-stoichiometric Ta{sub x}Si{sub y}N{sub 0.56}. The optical properties were investigated by near-normal-incidence reflectivity and ellipsometric measurements in the optical energy range from 0.375 eV to 6.8 eV, while the d.c. electrical resistivity was measured in the van der Pauw configuration from 20 K to 300 K. The optical and electrical measurements were interpreted using the standard Drude-Lorentz model and the so-called grain boundary scattering model, respectively. The electronic properties were closely correlated with the compositional and structural modifications of the Ta{sub x}Si{sub y}N{sub z} films due to variations in the stoichiometry of the fcc-TaN{sub z} system and the addition of Si atoms. According to the nitrogen and silicon contents, fcc-Ta{sub x}Si{sub y}N{sub z} films can exhibit room temperature resistivity values ranging from 10{sup 2} {mu}{Omega} cm to about 6 Multiplication-Sign 10{sup 4} {mu}{Omega} cm. The interpretation of the experimental temperature-dependent resistivity data within the Grain Boundary Scattering model, combined with the results from optical investigations, showed that the mean electron transmission probability G and the free carriers concentration, N, are the main parameters that control the transport properties of these films. The results indicated that the correlation between electrical and optical measurements with the chemical composition and the nanostructure of the Ta{sub x}Si{sub y}N{sub z} thin films provides a pertinent and consistent description of the evolution of the Ta-Si-N system from a solid solution to a nanocomposite material due to the addition of Si atoms.

36 MATERIALS SCIENCE↗

Polar behavior of double perovskite (Bi,Pb)ZnNbO6 and (Bi,Sr)ZnNbO6: Density functional calculations

The polar behavior of double perovskite (Bi,Pb)ZnNbO{sub 6} and (Bi,Sr)ZnNbO{sub 6} was investigated using first principles density functional calculations within the local density approximation. These materials have both A-site size disorder and ions with sterochemical activity. We found a strong ferroelectric distortion in both materials. The polarization of the Pb material is >80 muCcm{sup 2} along the rhombohedral direction and the Sr based material is only slightly inferior. The high polarization results mainly from a large off-centering of Bi and the large Born effective charge of Nb, which yields a large contribution polarization although the Nb off-centers by a smaller amount. Neither of these materials favors a tetragonal state, and therefore solid solutions with PbTiO{sub 3} may show morphotoropic phase boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-Induced structural phase transformations in Cu{sub 1.50}Zn{sub 0.30}Te and Cu{sub 1.75}Cd{sub 0.05}Te single crystals

The results of studying the temperature-induced polymorphic phase transformations in Cu{sub 1.50}Zn{sub 0.30}Te and Cu{sub 1.75}Cd{sub 0.05}Te single crystals are presented. The single crystals have been investigated in the range of 290–1100 K using X-ray diffraction analysis. The temperature dependences of the unit-cell parameters, X-ray density, and coefficients of thermal expansion for each polymorphic modification of Cu{sub 1.50}Zn{sub 0.30}Te and Cu{sub 1.75}Cd{sub 0.05}Te single crystals are presented. The influence of cationic substitution (replacement of Cu{sup 2+} with Zn{sup 2+} and Cd{sup 2+} cations) on the phase-formation processes, number of polymorphic modifications, and temperature of structural phase transition in single crystals of these solid solutions is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-resolved studies of the order-disorder phase transformations in rare-earth-transition metal intermetallics with 2-17 stoichiometry

High-temperature order-disorder transformations in R{sub 2}T{sub 17} and R{sub 2}T{sub 17}-M-C intermetallics with R = Pr, Sm, Dy, Tb; T = Co, Fe; and M = Zr, Nb were studied utilizing time-resolved synchrotron x-ray diffraction at the Advanced Photon Source (APS) at the U.S. Department of Energy's Argonne National Laboratory (Argonne, IL). High-energy synchrotron radiation provides intense, highly penetrating x-rays, which are ideal for in situ studies of phase transformations. Alloying additions are used to stabilize formation of metastable phases; their influence on order recovery was investigated. The experimental setup utilized Debye-Scherrer geometry; specimens were heated at a rate of 10 K/min. Full-profile diffraction patterns collected every 10 s were refined in sequence using the Rietveld method to track changes of lattice parameters and phase assemblages during heating. Sharp changes observed in the evolution of temperature-dependent lattice parameters suggested formation of ordered structure via nucleation and growth. Both 2-17 polymorphs co-existed in light and heavy rare-earth systems at high temperatures. The presence of alloying additions in the solid solution greatly influenced long-range order formation.

43 PARTICLE ACCELERATORS↗

Survey of basic XRD applications.

This 1/2 day workshop will survey various applications of XRD analysis, including in-situ analyses and neutron diffraction. The analyses will include phase ID, crystallite size and microstrain, preferred orientation and texture, lattice parameters and solid solutions, and residual stress. Brief overviews of high-temperature in-situ analysis, neutron diffraction and synchrotron studies will be included.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The electrical and mechanical properties of Au-V and Au-V{sub 2}O{sub 5} thin films for wear-resistant RF MEMS switches

To explore alternatives to the use of pure Au in Ohmic contact RF microelectromechanical switches, we have measured changes in the electrical resistivity and nanoindentation hardness of a series of sputter deposited Au-V and Au-V{sub 2}O{sub 5} thin films. Increasing V content in the Au-V alloys increases resistivity and hardness, which is consistent with solid solution strengthening. In the Au-V{sub 2}O{sub 5} films, the increase in resistivity is greatly reduced and the hardness is further increased as expected for dispersion strengthening with V{sub 2}O{sub 5} particles. These two phenomena are explained in terms of solute and particle effects on electron scattering and bowing of dislocations, respectively.

36 MATERIALS SCIENCE↗

In situ Ultrasonic Velocity Measurements Across the Olivine-spinel Transformation in Fe2Si04

Compressional (P) and shear (S) wave velocities across the olivine-spinel transformation in Fe{sub 2}SiO{sub 4} were investigated in situ using combined synchrotron X-ray diffraction, X-ray imaging, and ultrasonic interferometry up to 5.5 GPa along the 1173 K isotherm. The onset of the spinel to olivine transformation at 4.5 GPa and olivine to spinel transition for Fe{sub 2}SiO{sub 4} at 4.8 GPa was concurrently observed from X-ray diffraction, the amplitude of the ultrasonic signals, the calculated velocities, and the ratio of P and S wave velocities (v{sub P}/v{sub S}). No velocity softening was observed prior to the fayalite to spinel transition. The velocity contrasts across the Fe{sub 2}SiO{sub 4} spinel to fayalite phase transition are derived directly from the measured velocities, which are 13 and 12% for P and S waves, respectively, together with a density contrast of 9.4%. A comparison with literature data indicates that the changes in compressional-wave velocity and density across the olivine-spinel transformation in Fe{sub 2}SiO{sub 4} are comparable to those with different iron concentrations in the (Mg,Fe){sub 2}SiO{sub 4} solid solution, whereas the shear wave velocity contrast decreases slightly with increasing iron concentration.

58 GEOSCIENCES↗

Characterization of Cu–Ni nanostructured alloys obtained by a chemical route. Influence of the complexing agent content in the starting solution

The influence of the amount of complexing agent added to the starting solution on the physicochemical properties of Cu–Ni nanostructured alloys obtained through a chemical route, was studied. For this purpose, three Cu–Ni nanoalloy samples were synthesized by a previously developed procedure, starting from solutions with citric acid to metal molar ratios (C/Me) of 0.73, 1.00 and 1.50. The synthesis technique consisted in preparing a precursor via the citrate-gel method, and carrying out subsequent thermal treatments in controlled atmospheres. Sample characterization was performed by scanning electron microscopy, X-ray microanalysis, X-ray diffraction, transmission electron microscopy, X-ray nanoanalysis and electron diffraction. In the three cases, copper and nickel formed a solid solution with a Cu/Ni atomic ratio close to 50/50, and free of impurities inside the crystal structure. The citric acid content of the starting solution proved to have an important influence on the morphology, size distribution, porosity, and crystallinity of the Cu–Ni alloy microparticles obtained, but a lesser influence on their chemical composition. The molar ratio C/Me = 1.00 resulted in the alloy with the Cu/Ni atomic ratio closest to 50/50. - Highlights: • We synthesize Cu–Ni nanoalloys by a chemical route based on the citrate-gel method. • We study the influence of the complexing agent content of the starting solution. • We characterize the samples by electron microscopy and X-ray techniques. • Citric acid influences the shape, size, porosity and crystallinity of the alloys.

36 MATERIALS SCIENCE↗

Nanostructured crystals of fluorite phases Sr{sub 1−x}R{sub x}F{sub 2+x} and their ordering: VIII. Imperfect crystal structure of Sr{sub 0.71}Ce{sub 0.29}F{sub 2.29}

A congruently melting single crystal of nonstoichiometric phase Sr{sub 0.71}Ce{sub 0.29}F{sub 2.29} crystallizing into the CaF{sub 2} structural type (sp. gr Fm<##> } } 3 }&#x00AF;<!-- ?? --> $ /bar 3 $ 3-bar </##>m) has been studied by X-ray diffraction analysis. Vacancies in the main fluorine position 8c and interstitial anions in two 32f positions have been found. The ratio of the structural defects in the Sr{sub 0.71}Ce{sub 0.29}F{sub 2.29} solid solution corresponds to the tetrahedral configuration of the defect cluster {Sr_4_−_nCe_nF_2_6}.

36 MATERIALS SCIENCE↗