Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A time-split finite-volume algorithm for three-dimensional flow-field simulation

A general finite-volume algorithm is developed for solving three-dimensional, time-dependent, compressible Navier-Stokes equations for high Reynolds number flows over an arbitrary geometry. This algorithm adapts MacCormack's (1982) explicit-implicit scheme to a time-split, three-dimensional finite-volume concept in a general coordinate system. It is shown that the thin-layer approximation in all three spatial directions significantly reduces the evaluation of viscous terms and allows the algorithm to solve more complicated geometries with all boundaries in two or all three directions. The calculated results using this method are found to be in good agreement with the experimental measurements of a blunt-fin induced shock wave and boundary-layer interaction problems. Observations of the existence of peak pressure, primary horseshoe and secondary vortices, and reversed supersonic zones show that computational fluid dynamics can effectively supplement the wind tunnel tests for aerodynamic design as well as for understanding basic fluid dynamics.

Hung, C. M.↗
NASA NTRS2003

Control of Interacting Vortex Flows at Subsonic and Transonic Speeds Using Passive Porosity

A wind tunnel experiment was conducted in the NASA Langley Research Center (LaRC) 8-foot Transonic Pressure Tunnel (TPT) to determine the effects of passive surface porosity on vortex flow interactions about a general research fighter configuration at subsonic and transonic speeds. Flow- through porosity was applied to a wind leading-edge extension (LEX) mounted to a 65 deg cropped delta wind model to promote large nose-down pitching moment increments at high angles of attack. Porosity decreased the vorticity shed from the LEX, which weakened the LEX vortex and altered the global interactions of the LEX and wing vortices at high angles of attack. Six-component forces and moments and wing upper surface static pressure distributions were obtained at free- stream Mach numbers of 0.50, 0.85, and 1.20, Reynolds number of 2.5(10(exp-6) per foot, angles of attack up to 30 deg and angles of sideslip to plus or minus 8 deg. The off-surface flow field was visualized in selected cross-planes using a laser vapor screen flow visualization technique. Test data were obtained with a centerline vertical tail and with alternate twin, wing-mounted vertical fins having 0 deg and 30 deg cant angles. In addition, the porosity of the LEX was compartmentalized to determine the sensitivity of the vortex- dominated aerodynamics to the location and level of porosity applied to the LEX.

NATO FURNISHED↗
NASA NTRS2004

Accretion and Heating of Particles by Supersonic Planetesimals

Recently, nebular shock waves have become one of the leading candidates for explaining the presence of chondrules in primitive meteorites. While shocks have been shown to be capable of explaining many of the features of chondrules, a major problem with the theory is that the source of the shocks remains unidentified. Among the suggested sources of the shocks are bow shocks created by supersonic planetesimals in the nebula. Recently, we studied the structure of the shocks that would form around such supersonic planetesimals. We found that particles that encountered the shocks at distances greater than 2 planetesimal radii from the planetesimal would cool too quickly to form the textures observed in chondrules. While the region of the shock far away from the planetesimal may not allow chondrules to form, the region closer in has not been studied in detail. In this work we consider the dynamical and thermal evolution of particles that encounter supersonic planetesimals in this region.

Ciesla, F. J.↗
NASA NTRSDate not supplied

3D Radiative MHD Modeling of the Solar Atmospheric Dynamics and Structure

Dramatic dynamical phenomena accompanied by strong thermodynamic and magnetic structuring are the primary drivers of great interest in studying the solar atmosphere with high spatial and temporal resolutions. Using current computational capabilities, it has become possible to model the magnetized solar plasma in different regimes with a high degree of realism. To study the fine structuring of the solar atmosphere and dynamics, we use 3D MHD radiative models covering all layers from the upper convection zone to the corona. Realistic 3D radiative MHD modeling of the solar magnetoconvection and atmosphere allows us to generate synthetic observables that directly link the physical properties of the solar plasma to spectroscopic observables. In the presentation, we discuss qualitative and quantitative changes of the atmospheric structure and dynamics at different layers of the solar atmosphere, properties of acoustic and surface gravity waves, sources of local heating in the chromosphere-corona transition region, formation of shocks, and high-frequency oscillations in the corona, as well as manifestation of these phenomena in the modeled observables.

SMD↗
NASA NTRS1994

Three-dimensional hydrodynamic Bondi-Hoyle accretion. 2: Homogeneous medium at Mach 3 with gamma = 5/3

We investigate the hydrodynamics of three-dimensional classical Bondi-Hoyle accretion. Totally absorbing spheres of varying sizes (from 10 down to 0.01 accretion radii) move at Mach 3 relative to a homogeneous and slightly perturbed medium, which is taken to be an ideal gas (gamma = 5/3). To accommodate the long-range gravitational forces, the extent of the computational volume is 32(exp 3) accretion radii. We examine the influence of numerical procedure on physical behavior. The hydrodynamics is modeled by the 'piecewise parabolic method.' No energy sources (nuclear burning) or sinks (radiation, conduction) are included. The resolution in the vicinity of the accretor is increased by multiply nesting several (5-10) grids around the sphere, each finer grid being a factor of 2 smaller in zone dimension that the next coarser grid. The largest dynamic range (ratio of size of the largest grid to size of the finest zone) is 16,384. This allows us to include a coarse model for the surface of the accretor (vacuum sphere) on the finest grid, while at the same time evolving the gas on the coarser grids. Initially (at time t = 0-10), a shock front is set up, a Mach cone develops, and the accretion column is observable. Eventually the flow becomes unstable, destroying axisymmetry. This happens approximately when the mass accretion rate reaches the values (+/- 10%) predicted by the Bondi-Hoyle accretion formula (factor of 2 included). However, our three-dimensional models do not show the highly dynamic flip-flop flow so prominent in two-dimensional calculations performed by other authors. The flow, and thus the accretion rate of all quantities, shows quasi-periodic (P approximately equals 5) cycles between quiescent and active states. The interpolation formula proposed in an accompanying paper is found to follow the collected numerical data to within approximately 30%. The specific angular momentum accreted is of the same order of magnitude as the values previously found for two-dimensional flows.

Ruffert, Maximilian↗
DOE OSTI2024

Impacts of aluminum-cerium alloy deployment on different cerium commodities

An imbalance problem exists in the rare earth element (REE) market with cerium and lanthanum being more abundant and less valuable than REEs used in permanent magnets such as neodymium, praseodymium, and dysprosium. Research has been conducted on new applications for abundant REEs to improve mining economics. However, potential market impacts of these applications on individual REE commodities are unknown. A system dynamics model was built to investigate the impacts of a new aluminum-cerium (Al-Ce) alloy that can theoretically utilize three separate cerium forms: cerium carbonate, cerium oxide, or cerium metal. Cerium carbonate currently possesses the lowest price of the three available forms making it initially the most favorable choice. However, model results showed that cerium oxide could provide the best economics for future Al-Ce alloy deployment because its larger market size buffers major shocks to price.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Spontaneous shock waves in pulse-stimulated flocks of Quincke rollers

Active matter demonstrates complex spatiotemporal self-organization not accessible at equilibrium and the emergence of collective behavior. Fluids comprised of microscopic Quincke rollers represent a popular realization of synthetic active matter. Temporal activity modulations, realized by modulated external electric fields, represent an effective tool to expand the variety of accessible dynamic states in active ensembles. Here, we report on the emergence of shockwave patterns composed of coherently moving particles energized by a pulsed electric field. The shockwaves emerge spontaneously and move faster than the average particle speed. Combining experiments, theory, and simulations, we demonstrate that the shockwaves originate from intermittent spontaneous vortex cores due to a vortex meandering instability. They occur when the rollers’ translational and rotational decoherence times, regulated by the electric pulse durations, become comparable. The phenomenon does not rely on the presence of confinement, and multiple shock waves continuously arise and vanish in the system.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nonlinear modeling and performance analysis of cracked beam microgyroscopes

Cracks constitute a common structural defect in microelectromechanical systems that may arise during manufacturing, mechanical fatigue, or shock loading. Areas weakened by cracks increase the flexibility of the microstructure. Furthermore, depending on the crack severity, the increased flexibility can cause dramatic changes in the static and dynamic behaviors of electrically actuated MEMS. In this study, a numerical investigation of the depth and location of multiple edge cracks on the performance of beam microgyroscopes is conducted. Applying the Griffith strain energy release theorem for an edge crack, the vibrational characteristics of microgyroscopes with multiple cracks including the static deflection, natural frequencies, and mode shapes are studied analytically. Then, the differential quadrature method is employed to model the nonlinear dynamic behaviors of the cracked gyroscope system. Cracks initiated along the driving or sensing directions of the microgyroscope are found to have differing effects on its nonlinear dynamic response. This numerical study reveals that the onset of severe single cracks or a series of multiple cracks can significantly affect the sensitivity of the microgyroscope to base rotations and therefore leads to a degradation in the performance of the damaged MEMS sensor. This study also shows that a potential design approach for broadband microgyroscope systems manufactured with cracks can be proposed.

42 ENGINEERING↗
DOE OSTI2021

Multidimensional Numerical Modeling of Combustion Dynamics in a Non-Premixed Rotating Detonation Engine With Adaptive Mesh Refinement

In the present work, a novel computational fluid dynamics (CFD) methodology was developed to simulate full-scale non-premixed rotating detonation engines (RDEs). A unique feature of the modeling approach was the incorporation of adaptive mesh refinement (AMR) to achieve a good trade-off between model accuracy and computational expense. Here, unsteady Reynolds-averaged Navier–Stokes (RANS) simulations were performed for an Air Force Research Laboratory (AFRL) non-premixed RDE configuration with hydrogen as fuel and air as the oxidizer. The finite-rate chemistry model, along with a ten-species detailed kinetic mechanism, was employed to describe the H 2 -Air combustion chemistry. Three distinct operating conditions were simulated, corresponding to the same global equivalence ratio of unity but different fuel/air mass flowrates. For all conditions, the capability of the model to capture essential detonation wave dynamics was assessed. An exhaustive verification and validation study was performed against experimental data in terms of a number of waves, wave frequency, wave height, reactant fill height, oblique shock angle, axial pressure distribution in the channel, and fuel/air plenum pressure. The CFD model was demonstrated to accurately predict the sensitivity of these wave characteristics to the operating conditions, both qualitatively and quantitatively. A comprehensive heat release analysis was also conducted to quantify detonative versus deflagrative burning for the three simulated cases. The present CFD model offers a potential capability to perform rapid design space exploration and/or performance optimization studies for realistic full-scale RDE configurations.

42 ENGINEERING↗
DOE OSTI2023

Advancing uncertainty characterization for understanding projected water scarcity in multi-sector, multi-actor river basins across scales.

Invited Talk at AGU Fall Meeting 2023 Modeling how human institutions and infrastructure interact with the water cycle is essential to better understand the vulnerability, and resilience of water resources systems from the local to the global scale. This is especially true when investigating multi-sector, multi-actor responses to the effects of long-term changes and short-term shocks. It is also well recognized that uncertainty present throughout the modeling cycle (e.g., in data, functional relations, and model coupling approaches) limits our ability to trace the interactive dynamics of human-water systems, as well as to quantify their implications for management and planning. Systems with large numbers of diverse stakeholders further compound this challenge, as uncertain drivers and complex dynamics might have very disparate effects on water users. The work presented is conducted through the Integrated Multisector Multiscale Modeling (IM3) Science Focus Area, which explores how human and natural systems co-evolve in response to change. Through this multi-year effort, we have developed exploratory modeling methods to better characterize how the uncertain human and natural drivers of water scarcity yield consequential vulnerabilities in institutionally complex, multi-sectoral systems. This talk will specifically present on a series of uncertainty characterization experiments performed in the Upper Colorado River Basin, a sub-basin of the Colorado with thousands of water users. These complementary and systematic experiments are aimed at understanding: How are various uncertain stressors (e.g., climate change, demand growth) affecting the diverse water users of this basin in terms of water shortage? What are the key drivers of this shortage for each user? Methods and results from this work are used to address additional questions on the ability of adaptation to modulate the effects of these uncertain drivers, and on their compounding effects across spatial scales and through sectoral interactions.

Hadjimichael, Antonia↗
NASA NTRS1976

Flux-corrected transport techniques for transient calculations of strongly shocked flows

New flux-corrected transport algorithms are described for solving generalized continuity equations. These techniques were developed by requiring that the finite difference formulas used ensure positivity for an initially positive convected quantity. Thus FCT is particularly valuable for fluid-like problems with strong gradients or shocks. Repeated application of the same subroutine to mass, momentum, and energy conservation equations gives a simple solution of the coupled time-dependent equations of ideal compressible fluid dynamics without introducing an artificial viscosity. FCT algorithms span Eulerian, sliding-rezone, and Lagrangian finite difference grids in several coordinate systems. The latest FCT techniques are fully vectorized for parallel/pipeline processing.

Boris, J. P.↗
NASA NTRS1979

Interplanetary magnetic fields

The paper reviews the following studies on interplanetary magnetic fields: (1) the relation of the interplanetary field to the sun and to solar-wind streams; (2) radial gradients in the solar wind and interplanetary field; (3) shocks, hydromagnetic waves and discontinuities; (4) variations of interplanetary field parameters over the solar cycle; (5) the relation between the interplanetary field and the terrestrial magnetosphere; (6) the internal dynamics of the magnetic field and solar wind plasma; and (7) the transport, acceleration, and modulation of energetic particles, including cosmic rays. It is noted that further studies will relate to the complex relations between the interplanetary field and solar structure.

Smith, E. J.↗
NASA NTRS1989

Development and validation of CNS (compressible Navier-Stokes) for hypersonic external flows

CNS, a new computational fluid dynamics procedure, has been developed to aid in hypersonic vehicle design. The code can be used to model the entire external flow around hypersonic vehicle shapes, from the captured shock at the nose to the beginning of the wake. Unlike space-marching codes, the technique allows axially separated flow regions to be modeled. Validation trials using sphere-cone data reveal good solution accuracy for the surface pressure and flowfield temperature.

Flores, Jolen↗
NASA NTRS1989

International Conference on Numerical Methods in Fluid Dynamics, 11th, Williamsburg, VA, June 27-July 1, 1988, Proceedings

Recent advances in computational fluid dynamics (CFD) are discussed in reviews and reports. Topics addressed include CFD models in plasma dynamics, parallel computation for simulation studies, CFD for hypersonic airbreathing aircraft, multigrid methods for the steady incompressible Navier-Stokes equations, upwind differencing techniques, TV stable schemes for shock-interacting flows, Euler models of hypersonic vortex flows, parallel multilevel adaptive methods, and vortex methods for slightly viscous three-dimensional flows. Consideration is given to the accuracy of node-based solutions on irregular meshes, multigrid calculations for cascades, a finite-volume-element method for planar cavity flow, parallel heterogeneous mesh refinement for advection-diffusion equations, the convergence of the spectral-viscosity method for nonlinear conservation laws, and numerical simulations of Taylor vortices in a spherical gap.

Dwoyer, D. L.↗
NASA NTRS1990

Numerical simulations of the rebound shock model for solar spicules

Using time-dependent numerical simulations, the proposed rebound shock mechanism for spicules has been examined. At temperatures above a critical value, T(c), the radiation is characteristic of the conditions in the optically thin corona and near optically thin transition region. When T less than T(c), the atmosphere has a radiative cooling time, tau(rad) characteristic of chromosphere. The spicule is initiated with a quasi-impulsive force in the low chromosphere, which drives a train of upward propagating rebound shocks along the rigid magnetic flux tube. These shocks then move the transition region upward. The material below the displaced transition region has temperatures and densities similar to those of spicules when T(c) = 20,000 K or more and tau(rad) = 500 s or more, but not when T(c) = 10,000 K, and probably not when tau(rad) = 100 s. For all the cases where the cross sectional area diverges rapidly with height, the upward velocity of the transition region is less than that of spicules. Moreover, the maximum height is less than that of average spicules. Taller, higher velocity spicules result when the magnetic field cross sectional area is constant. In all cases, the rebound shock mechanism produces substantial motions and temperature and density variations in chromospheric and transition region material. It is suggested that this may be a partial explanation for the continuous dynamic state of the lower solar atmosphere.

Sterling, Alphonse C.↗
NASA NTRS1991

Vectorization of a Monte Carlo simulation scheme for nonequilibrium gas dynamics

Significant improvement has been obtained in the numerical performance of a Monte Carlo scheme for the analysis of nonequilibrium gas dynamics through an implementation of the algorithm which takes advantage of vector hardware, as presently demonstrated through application to three different problems. These are (1) a 1D standing-shock wave; (2) the flow of an expanding gas through an axisymmetric nozzle; and (3) the hypersonic flow of Ar gas over a 3D wedge. Problem (3) is illustrative of the greatly increased number of molecules which the simulation may involve, thanks to improved algorithm performance.

Boyd, Iain D.↗
NASA NTRS1992

Recent results on Mars and Venus; Proceedings of Symposium 3 and the Topical Meetings of the Interdisciplinary Scientific Commission C (Meeting C1) and D (Meeting D1) of the COSPAR 28th Plenary Meeting, The Hague, Netherlands, June 25-July 6, 1990

In this volume, latest results on Mars and Phobos studies are discussed along with recent results on Venus and on Martian plasma environment. Papers are presented on the characteristics of aerosol phenomena in Martian atmosphere from KRFM-experiment data, Phobos map and Phobos globe, submicron-sized dust grains in the Martian environment, remote sensing of Venus atmospheric dynamics, the latitude structure of upper clouds of Venus, and Venus thermospheric response to short-term solar variations. Attention is also given to a comparison between the bow shocks and magnetotails of Venus and Mars, comparative studies of the solar wind interaction with weakly magnetized planets, the magnetic field environment of Mars as studied by Phobos-2, waves and cold plasmas near Mars, and multiple-ion effects at Martian plasma boundaries.

Shorthill, R. W.↗
NASA NTRS1990

Heat Pipe Vapor Dynamics

The dynamic behavior of the vapor flow in heat pipes is investigated at startup and during operational transients. The vapor is modeled as two-dimensional, compressible viscous flow in an enclosure with inflow and outflow boundary conditions. For steady-state and operating transients, the SIMPLER method is used. In this method a control volume approach is employed on a staggered grid which makes the scheme very stable. It is shown that for relatively low input heat fluxes the compressibility of the vapor flow is low and the SIMPLER scheme is suitable for the study of transient vapor dynamics. When the input heat flux is high or the process under a startup operation starts at very low pressures and temperatures, the vapor is highly compressible and a shock wave is created in the evaporator. It is shown that for a wide range of input heat fluxes, the standard methods, including the SIMPLER scheme, are not suitable. A nonlinear filtering technique, along with the centered difference scheme, are then used for shock capturing as well as for the solution of the cell Reynolds-number problem. For high heat flux, the startup transient phase involves multiple shock reflections in the evaporator region. Each shock reflection causes a significant increase in the local pressure and a large pressure drop along the heat pipe. Furthermore, shock reflections cause flow reversal in the evaporation region and flow circulations in the adiabatic region. The maximum and maximum-averaged pressure drops in different sections of the heat pipe oscillate periodically with time because of multiple shock reflections. The pressure drop converges to a constant value at steady state. However, it is significantly higher than its steady-state value at the initiation of the startup transient. The time for the vapor core to reach steady-state condition depends on the input heat flux, the heat pipe geometry, the working fluid, and the condenser conditions. However, the vapor transient time, for an Na-filled heat pipe is on the order of seconds. Depending on the time constant for the overall system, the vapor transient time may be very short. Therefore, the vapor core may be assumed to be quasi-steady in the transient analysis of a heat pipe operation.

Issacci, Farrokh↗