SEARCH · Engineering Papers

Results for “reference models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Materials and techniques for model construction

The problems confronting the designer of models for cryogenic wind tunnel models are discussed with particular reference to the difficulties in obtaining appropriate data on the mechanical and physical properties of candidate materials and their fabrication technologies. The relationship between strength and toughness of alloys is discussed in the context of maximizing both and avoiding the problem of dimensional and microstructural instability. All major classes of materials used in model construction are considered in some detail and in the Appendix selected numerical data is given for the most relevant materials. The stepped-specimen program to investigate stress-induced dimensional changes in alloys is discussed in detail together with interpretation of the initial results. The methods used to bond model components are considered with particular reference to the selection of filler alloys and temperature cycles to avoid microstructural degradation and loss of mechanical properties.

Wigley, D. A.↗

NASA NTRS2013

Comparative Study of foF2 Measurements with IRI-2007 Model Predictions During Extended Solar Minimum

The unusually deep and extended solar minimum of cycle 2324 made it very difficult to predict the solar indices 1 or 2 years into the future. Most of the predictions were proven wrong by the actual observed indices. IRI gets its solar, magnetic, and ionospheric indices from an indices file that is updated twice a year. In recent years, due to the unusual solar minimum, predictions had to be corrected downward with every new indices update. In this paper we analyse how much the uncertainties in the predictability of solar activity indices affect the IRI outcome and how the IRI values calculated with predicted and observed indices compared to the actual measurements.Monthly median values of F2 layer critical frequency (foF2) derived from the ionosonde measurements at the mid-latitude ionospheric station Juliusruh were compared with the International Reference Ionosphere (IRI-2007) model predictions. The analysis found that IRIprovides reliable results that compare well with actual measurements, when the definite (observed and adjusted) indices of solar activityare used, while IRI values based on earlier predictions of these indices noticeably overestimated the measurements during the solar minimum.One of the principal objectives of this paper is to direct attention of IRI users to update their solar activity indices files regularly.Use of an older index file can lead to serious IRI overestimations of F-region electron density during the recent extended solar minimum.

Ionosphere↗

NASA NTRSDate not supplied

Assessment of Using Ideal Gas for Predicting Boattail Flow at Cryogenic Temperatures

The applicability of using ideal gas assumptions to simulate high Reynolds number experimental data that was obtained at cryogenic temperatures is examined. Flow over an axisymmetric nozzle boattail model was calculated using reference temperatures of 117 K and 300 K and at Reynolds numbers from 50 to 200 million per meter. From the testing perspective, pressure, compression factor, and isentropic coefficients calculated using one-dimensional real gas equations are used to examine the departure of cryogenic flow from ideal gas flow across the range of temperatures and potential impacts on measured aerodynamic data. Solutions developed using ideal gas assumptions in a three-dimensional Navier-Stokes code are compared with experimental data obtained at cryogenic temperatures at two unit Reynolds numbers at freestream Mach numbers of 0.6 and 0.9. Results for several one- and two-equation turbulence models are shown. Predicted pressure coefficient distributions along the nozzle boattail differed from experimental data between 8% to less than 0.5% depending on the turbulence model and Mach number. The greatest discrepancy occurred in the level of static pressure recovery in the recompression region where the flow was separated. Solutions using warm and cryogenic freestream temperatures predicted similar boattail pressure distributions at the same unit Reynolds number.

Nozzle↗

NASA NTRSDate not supplied

Assessment of Using Ideal Gas for Predicting Boattail Flow at Cryogenic Temperatures

Nozzle↗

NASA NTRS2006

Toward a Framework for Modeling Space Systems Architectures

In this paper we will describe this extended RASDS/RAMSS methodology, the set of viewpoints that we have derived, and describe their relationship to RM-ODP. While this methodology may be directly used in a variety of document driven ways to describe space system architecture, the real power of it will come when there are tools available that will support full description of system architectures that can be captured electronically in a way that permits their analysis, verification, and transformation.

cost savings↗

DOE OSTI2026

Anti-Ultralocality and Plateau Models of Inflation

Anti-ultralocality refers to the growth of spatial gradient terms relative to velocity terms in the coupled Einstein--scalar field equations. It is a characteristic feature of decelerated expansion before the onset of inflation. Previous numerical relativity studies have shown that anti-ultralocality prevents the onset of inflation in models with power-law inflaton potentials. In this paper, we show that models with plateau-shaped inflaton potentials, which are considered to be the simplest way to generate a tensor-to-scalar ratio below current observational upper limits, are especially vulnerable to anti-ultralocality effects. The reasons are the flatness of the plateau and the energy density gap of $\sim 10$ orders of magnitude between the Planck density and the plateau potential energy. To study the problem, we develop a protocol for assessing the viability of inflationary models in general, and we apply it to a plateau potential using a previously validated numerical relativity code. We find that, starting from generic initial conditions, the growth of gradient terms in the Einstein equations relative to non-gradient terms either prevents inflation from lasting for enough $e$-folds or triggers a phase of quantum runaway. We show that the fine-tuning of initial conditions necessary to avoid these issues becomes more severe as the energy scale of inflation is made smaller, disfavoring common approaches for reducing the tensor-to-scalar ratio.

FOS: Physical sciences↗

DOE OSTI2022

Simple Approximation for the Ideal Reference State of Gases Adsorbed on Solid-State Surfaces

Reference states are useful as models for facilitating calculations of equilibrium constants, and they may also serve as standard states that are convenient for organizing and tabulating thermodynamic data; however, standard state conventions and appropriate reference states for adsorbed species have received less attention than those for pure substances and solutes. Here, we compare seven choices of reference states for calculations of equilibrium constants and transition state theory rate constants for flat surfaces, in particular (1) an ideal 2D harmonic oscillator, (2) an ideal rigid-molecule harmonic oscillator, (3) an ideal 2D harmonic oscillator with separable surface modes, (4) a 2D ideal gas, (5) an ideal 2D hindered translator, (6) an ideal 2D hindered translator with lowest-order barriers, and (7) a simple ideal 2D hindered translator proposed in this work. The advantage of models 5–7 is that they can treat both mobile and localized adsorbates in a consistent way, whereas models 1–3 are only appropriate for localized adsorbates, and model 4 is only appropriate for a freely translating adsorbate. Furthermore, models 6 and 7 reduce the computational cost without the user having to calculate barrier heights for diffusion. An advantage of the simple ideal 2D hindered translator is that it has a physical high-temperature limit. We also propose a reference state for nonflat surfaces. Here, the user is encouraged to choose a reference state based on the appropriateness of the model and the practicality of the calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1995

The underlying magnetic field direction in Ulysses observations of the southern polar heliosphere

Between May 1993 and January 1995, the Ulysses spacecraft has probed the southern polar heliosphere at latitudes greater than 30 deg S, reaching a maximum latitude of 80.2 deg S in September 1994. Using hourly averages of the data obtained by the magnetometer experiment on Ulysses we have studied the underlying direction of the magnetic field threading this region of the heliosphere, away from the influence of the magnetic sector structure which complicates similar analyses in the ecliptic plane. We have constructed histograms of the measured magnetic field direction using the simple Parker spiral model field direction as a reference. We find that throughout this region the meridional angle between the field vector and the Parker model direction has a distribution which is symmetric and has a most probable value consistent with the model. At latitudes below about 60 deg S the azimuthal angle distribution also has a most probable value consistent with the model but this distribution is highly asymmetric with a greater number of observations of field lines less tightly wound than the expected spiral direction. At latitudes greater than 60 deg S the most probable value of the azimuthal angle is found to have become nearly 30 more tightly wound than the expected direction, but due to the asymmetric distribution still with a greater number of observations less tightly wound than expected. We consider possible causes of both the asymmetry in the distributions and the shift in the most probable value at the highest latitudes, one of which may be the presence of large amplitude, long period Alfven waves in the magnetic field originating from the Sun's southern polar coronal hole.

Forsyth, R. J.↗

DOE OSTI2023

Reproducible benchmark for the SNAP 8 experimental reactor at dry conditions

Here, this work provides fully reproducible benchmark models of the Systems for Nuclear Auxiliary Power (SNAP) 8 Experimental Reactor. Validation benchmarks of the criticality configuration experiments under dry conditions with no coolant are presented. In addition, relevant reactivity worth experiments, and measurement of power distributions are validated and presented here. Discrepancies between modeled and experimental results are at most 110 pcm for fuel and poison worths, and critical configurations that do not manipulate control elements are within 50 pcm. Larger discrepancies found in reflector element worth experiments are due to experimental methodology which was noted as being simplified due to limited calculational capabilities at the time, while discrepancy in the control element manipulated critical configuration is due the absence of structural components for modeling simplification. Power distributions closely follow what was observed in experiment with expected peaking in reflecting elements. All models are well documented with cited references describing and justifying assumptions, simplifications, and adjustments to reproduce the models with any nuclear safety codes; model inputs and outputs are stored in the snapReactors GitHub repository.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

OECD/NEA MPCMIV Benchmark - Preliminary fuel performance results

The on-going OECD/NEA Multi-physics Pellet Cladding Mechanical Interaction Validation (MPCMIV) benchmark aims to provide guidance on multi-physics validation through the modelling of two cold ramps. In this paper, the first results for the base irradiation of the father rod and fuel rodlet (refabricated from the father rod), and the first cold ramp are presented. The base irradiation consists of 3 years of irradiation in the Forsmark-2 reactor. The cold ramp encompasses a steady-state pre-ramp period of less than one hour at a low constant linear heat rate (LHR) followed by a ramp test (< 1 min) with a much higher maximal LHR. The base irradiation is modelled using the fuel performance codes FRAPCON and FAST, while the cold ramp modeling is using the fuel performance code FRAPTRAN. Several missing parameters for FRAPCON/FAST base irradiation models have been selected using multiple references such as the OECD/NEA light water reactor Uncertainty Analysis in Modelling (UAM) benchmark specifications and the FRAPCON Integral Assessment report. The obtained results for the base irradiation such as the cladding outer diameter show reasonable agreement with the experimental measurements. The results for the cold ramp show larger differences with the experimental measurements (e.g., cladding axial elongation). However, such differences have been observed as well in other studies involving pellet cladding mechanical interaction analyses and are attributed to the fuel performance modelling assumptions and to the tuned modelling parameters that were not covered by the specifications. Uncertainty and sensitivity analysis might allow a better quantification of these missing parameters. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1995

Image Registration: A Necessary Evil

Registration of test and reference images is a key component of nearly all PSP data reduction techniques. This is done to ensure that a test image pixel viewing a particular point on the model is ratioed by the reference image pixel which views the same point. Typically registration is needed to account for model motion due to differing airloads when the wind-off and wind-on images are taken. Registration is also necessary when two cameras are used for simultaneous acquisition of data from a dual-frequency paint. This presentation will discuss the advantages and disadvantages of several different image registration techniques. In order to do so, it is necessary to propose both an accuracy requirement for image registration and a means for measuring the accuracy of a particular technique. High contrast regions in the unregistered images are most sensitive to registration errors, and it is proposed that these regions be used to establish the error limits for registration. Once this is done, the actual registration error can be determined by locating corresponding points on the test and reference images, and determining how well a particular registration technique matches them. An example of this procedure is shown for three transforms used to register images of a semispan model. Thirty control points were located on the model. A subset of the points were used to determine the coefficients of each registration transform, and the error with which each transform aligned the remaining points was determined. The results indicate the general superiority of a third-order polynomial over other candidate transforms, as well as showing how registration accuracy varies with number of control points. Finally, it is proposed that image registration may eventually be done away with completely. As more accurate image resection techniques and more detailed model surface grids become available, it will be possible to map raw image data onto the model surface accurately. Intensity ratio data can then be obtained by a "model surface ratio," rather than an image ratio. The problems and advantages of this technique will be discussed.

Bell, James↗

DOE OSTI2020

NEAMS Problem Draft (FY2020 Assessment)

This report documents the physical configuration required to model the assessment problem posed by the Reactor Physics focus area within the Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. This model is based on the Empire model developed by staff at Los Alamos National Laboratory under the MEITNER (Modeling-Enhanced Innovations Trailblazing Nuclear Energy Reinvigoration) program. The reference report does not provide dimensions for development of computational models; those data are provided elsewhere in published. Thus, this report has been prepared to provide a single reference that can be used to create consistent models by assessment participants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Mitigating energy demand sector emissions: The integrated modelling perspective

Mitigating carbon emissions in the current energy system will require fundamental changes of both the energy supply and the energy demand sectors. Previous global model-based analyses, however, have focused mostly on energy supply transformations, while the energy demand sector changes are less well understood. In this study, this knowledge gap is addressed by analysing in detail the projected future energy demand projections, and the required demand-side changes to reach stringent mitigation targets using a suite of integrated assessment models. We examine industry, transport and buildings sector pathways across four models and three different reference scenarios from the Shared-Socioeconomic Pathway framework which is used as a set of common future perspectives by the climate research community. The demand side mitigation efforts are compared to a more detailed, sector-specific, technology-oriented assessments of abatement potential based on a literature review for the year 2030. The results indicate that strong emission growth in the industry and transport sector can be attributed to increasing final energy per capita and population growth. In the stringent mitigation scenarios energy efficiency, electrification and switching to low carbon fuel are all required in the short term. In the green growth SSP1 scenario the required emission reduction is significantly less than other scenarios showing that the demand growth and the technology development largely affects the sectors’ mitigation challenge. The technology assessment estimates that in particular in the transport and buildings sector there is a higher potential to reduce demand-side emissions through energy efficiency improvements than currently envisioned in the integrated assessment models.

Edelenbosch, Oreane Y.↗

DOE OSTI2025

Urban weather modeling using WRF: linking physical assumptions, code implementation, and observational needs

The Weather Research and Forecasting (WRF) model includes urban schemes that simulate the influence of urban surfaces on the atmosphere using parameterizations for flux, and radiative exchanges. Three core schemes – the Bulk urban parameterization, Single-Layer Urban Canopy Model (SLUCM), and Multi-Layer Urban Canopy Model (MLUCM) – represent increasing levels of complexity. Although the parameterizations within these urban schemes are described in the literature, their specific implementation remains poorly documented, thus slowing down model development efforts. This manuscript provides a roadmap to the three urban schemes in WRF version 4.5.2, presenting equations using the same symbols as in the model code, along with references to code lines, and including graphics and explanations that connect the code to its physical foundations. Our thorough review of the urban parameterizations implemented in WRF version 4.5.2 highlighted a handful of parameters that may introduce discontinuities in simulations: (i) in the SLUCM, a 1 mm h −1 rain rate threshold is employed to switch between two minimum moisture availability parameterizations, thus impacting latent heat flux calculations; (ii) in the SLUCM a threshold is used to partition shortwave radiation into direct and diffuse components; (iii) in all three urban schemes, the bulk Richardson number is employed to select the similarity function, which influences the vertical distribution of heat and momentum. We also identified a highly simplified treatment of the radiative balance on roof surfaces. The implications of these simplifications can be assessed through targeted observations across relevant conditions, including varying precipitation rates, cloud cover, and transitions between stability regimes. Furthermore, the widespread application of the Monin-Obukhov similarity theory in these urban schemes warrants model evaluation under highly stable and unstable conditions and in heterogeneous urban settings with variable land cover and building heights on scales finer than model resolution. To address these challenges, we offer guidance on observational strategies, emphasizing the need for multi-parametric measurements to capture potential compensating biases and multi-height measurements that align with the levels where quantities are diagnostic and prognosed in the model (i.e., the lowest atmospheric level of the WRF model). Finally, our inspection of the code revealed implementation bugs that have now been corrected in WRF versions 4.6.0 and 4.6.1. Sensitivity tests over the Atlanta urban area show that these corrections affect surface temperatures, underscoring the importance of performing rigorous documentation and verification of the implementation of parameterizations in model code.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2022

Experimental and Computational Icing Simulation for Large Swept Wings

The purpose of this final report is to summarize the key results, findings and contributions of a large, multi-organization, multi-year effort focused on swept wing icing and aerodynamics. This research effort was jointly sponsored by NASA, FAA and ONERA and was supported by Boeing and the Universities of Illinois, Virginia, and Washington. The overall goal of this research was to improve the experimental and computational simulation capability for icing on large swept wings typical of commercial transports. This research included both ice accretion and aerodynamic studies using the NASA Common Research Model (CRM) as the reference geometry. For this work, a 65% scaled version—CRM65—was used as the full-scale baseline airplane geometry. This program marks the first non-proprietary research to generate and document full-scale swept wing ice accretions in an icing tunnel and then conduct semispan wing aerodynamic testing on scaled ice accretions at high Reynolds number (i.e., up to 11.9×106). During this work, several new experimental and computational techniques were developed or documented and new knowledge about swept wing icing aerodynamics was identified. All are documented in this report.

Aircraft icing↗

NASA NTRS2006

STAGS Example Problems Manual

This document summarizes the STructural Analysis of General Shells (STAGS) development effort, STAGS performance for selected demonstration problems, and STAGS application problems illustrating selected advanced features available in the STAGS Version 5.0. Each problem is discussed including selected background information and reference solutions when available. The modeling and solution approach for each problem is described and illustrated. Numerical results are presented and compared with reference solutions, test data, and/or results obtained from mesh refinement studies. These solutions provide an indication of the overall capabilities of the STAGS nonlinear finite element analysis tool and provide users with representative cases, including input files, to explore these capabilities that may then be tailored to other applications.

Knight, Norman F., Jr.↗

DOE OSTI2023

Comparison of three DWM-based wake models at above-rated wind speeds

In this study we investigate three mid-fidelity wind turbine wake models based on the dynamic wake meandering (DWM) model principle, and compare their performance with a reference dataset, produced with large-eddy simulations using the actuator line model. The models are compared with respect to flow field, power, and loads on a row of four 5MW reference turbines experiencing above-rated wind conditions. In general, the DWM models show fairly good agreement with large-eddy simulation for the time-averaged flow fields, blade forces and power, with increasing differences along the turbine row. Also when comparing fatigue loads of blade root moments, the differences between the models increase further into the row, with deviations up to 25 % of the reference case. However, while the development in blade root moment fatigue along the turbine row is predominantly driven by the energy content at the frequency corresponding to the turbine's rotational period (1 P ) for the DWM models, the large-eddy simulation results suggest that the key drivers for the blade root and tower loads are the increase in meandering and energy at higher frequencies (> 1 P ) deeper into the turbine row. For the tower loads, the DWM models highly underestimate the fatigue for the waked turbines. From these results, we suggest priorities for future model developments so that robust model implementations can be used in wind farm design and operation.

17 WIND ENERGY↗

NASA NTRS2011

GSFC OSTM, Jason-l and TOPEX POD Update

The OSTM (Jason-2) has been in orbit for three years (since June 2008), and the full suite of altimeter data from TOPEX/Poseidon, Jason-I and Jason-2 now span nearly twenty years since the launch of TOPEX in 1992. Issues that affect the stability of the orbits through time and the orbit accuracy include the reference frame, the radiation pressure models for the altimeter satellites and the fidelity of the dynamic force model, including time-variable gravity, as well as the performance of the individual tracking systems. We have conducted detailed analyses of the new ITRF2008 reference frame and find only a small effect on global mean sea level compared to ITRF2005, although we note an improvement in POD quality over the most recent time periods for Jason-2. In the past year we have developed a new time series of orbits for TOPEX/Poseidon, Jason-I, and Jason-2 based on the ITRF2008 reference frame using SLR and DORIS data and for Jason-2 using GPS data. In addition, we have continued to experiment with improvements to the radiation pressure model for the altimeter satellites in particular the Jason satellites since these nonconservative force model errors now rank as the most outstanding source of error on altimeter satellite POD. In the previous (ITRF2005-based) and current (ITRF2008-based) orbits we have relied on a simplified time-variable gravity (TVG) model, derived from GRACE solutions. We have recently experimented with improvements using higher fidelity TVG models (both temporally and spatially) and report on the results. We have computed a time series of GPS-only reduced-dynamic orbits at GSFC, and used these in conjunction with the SLR-DORIS dynamic and reduced-dynamic orbits to assess reference fiame stability with respect to the different tracking systems for both ITRF2005 and ITRF2008. We show through internal (GSFConly) and external comparisons (with other analysis centers) that the radial orbit accuracy for Jason-2 remains at I cm.

Lemoine, Frank G.↗