Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Modular Design of Receiver Side Power Electronics for 200 kW High Power Dynamic Wireless Charging System

Dynamic wireless power transfer (DWPT) can provide energy to EVs in motion and extend the drive range. By upscaling the charging power to 200 kW (High Power DWPT), the percentage of electrified roadway reduces and the solution becomes cost-effective. However, coil coupling-coefficient variation during vehicle movement fluctuates the transferred power which is unfavorable for vehicle battery. Secondary regulation design can smooth the power but the converter design becomes very challenging due to requirement in high power, high efficiency, fast control, as well as high power density since the unit will be onboard. This paper provides the modular design approach of a 200 kW secondary side unit to achieve high performance and scalability. The DC/DC converter using SiC devices demonstrated 98.3% efficiency.

Xue, Lincoln↗

Update on results of SPRE testing at NASA Lewis

The Space Power Research Engine (SPRE), a free-piston Stirling engine with a linear alternator, is being tested at NASA Lewis Research Center as part of the Civilian Space Technology Initiative (CSTI) as a candidate for high capacity space power. Results are presented from recent SPRE tests designed to investigated the effects of variation in the displacer seal clearance and piston centering port area on engine performance and dynamics. The impact of these variations on PV power and efficiency are presented. Comparisons of the displacer seal clearance tests results with HFAST code predictions show good agreement for PV power, but show poor agreement for PV efficiency. Correlations are presented relating the piston midstroke position to the dynamic Delta P across the piston and the centering port area. Test results indicate that a modest improvement in PV power and efficiency may be realized with a reduction in piston centering port area.

Cairelli, James E.↗

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells

Reducing the energy loss of sub-cells is critical for high performance tandem organic solar cells, while it is limited by the severe non-radiative voltage loss via the formation of non-emissive triplet excitons. Herein, we develop an ultra-narrow bandgap acceptor BTPSeV-4F through replacement of terminal thiophene by selenophene in the central fused ring of BTPSV-4F, for constructing efficient tandem organic solar cells. The selenophene substitution further decrease the optical bandgap of BTPSV-4F to 1.17 eV and suppress the formation of triplet exciton in the BTPSV-4F-based devices. The organic solar cells with BTPSeV-4F as acceptor demonstrate a higher power conversion efficiency of 14.2% with a record high short-circuit current density of 30.1 mA cm –2 and low energy loss of 0.55 eV benefitted from the low non-radiative energy loss due to the suppression of triplet exciton formation. We also develop a high-performance medium bandgap acceptor O1-Br for front cells. By integrating the PM6:O1-Br based front cells with the PTB7-Th:BTPSeV-4F based rear cells, the tandem organic solar cell demonstrates a power conversion efficiency of 19%. The results indicate that the suppression of triplet excitons formation in the near-infrared-absorbing acceptor by molecular design is an effective way to improve the photovoltaic performance of the tandem organic solar cells.

14 SOLAR ENERGY↗

Energy and power quality measurement for electrical distribution in AC and DC microgrid buildings

Today's selection of DC microgrid buildings features a diverse set of electrical topologies and turnkey solutions, each with specific design trade-offs and optimizations. Designers desperately need standardized metrics and procedures for measurement and verification (M&V) to analyze and compare the advantages of each DC solution to traditional AC building networks. This work develops M&V procedures for quantifying and comparing the energy efficiency and power quality in buildings. To calculate full-building efficiency, this work introduces the measurement-informed modeling method, a procedure that develops and refines a building's energy model with metered data. To quantify power quality, this work defines a new voltage quality index that applies to both AC and DC buildings. This article describes the equipment, instrumentation, and operation necessary to calculate the efficiency and power quality. It then demonstrates these methods with a set of field tests. We report these M&V procedures can ultimately be used to compare and improve the efficiency and power quality of various DC topologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Parametric Evaluation of Large-Scale High-Temperature Electrolysis Hydrogen Production Using Different Advanced Nuclear Reactor Heat Sources

High Temperature Electrolysis (HTE), when coupled to an advanced nuclear reactor capable of operating at reactor outlet temperatures of 800 °C to 950 °C, has the potential to efficiently produce the large quantities of hydrogen needed to meet future energy and transportation needs. To evaluate the potential benefits of nuclear-driven hydrogen production, the UniSim process analysis software was used to evaluate different reactor concepts coupled to a reference HTE process design concept. The reference HTE concept included an Intermediate Heat Exchanger and intermediate helium loop to separate the reactor primary system from the HTE process loops and additional heat exchangers to transfer reactor heat from the intermediate loop to the HTE process loops. The two process loops consisted of the water/steam loop feeding the cathode side of a HTE electrolysis stack, and the sweep gas loop used to remove oxygen from the anode side. The UniSim model of the process loops included pumps to circulate the working fluids and heat exchangers to recover heat from the oxygen and hydrogen product streams to improve the overall hydrogen production efficiencies. The reference HTE process loop model was coupled to separate UniSim models developed for three different advanced reactor concepts (a high-temperature helium cooled reactor concept and two different supercritical CO2 reactor concepts). Sensitivity studies were then performed to evaluate the affect of reactor outlet temperature on the power cycle efficiency and overall hydrogen production efficiency for each of the reactor power cycles. The results of these sensitivity studies showed that overall power cycle and hydrogen production efficiencies increased with reactor outlet temperature, but the power cycles producing the highest efficiencies varied depending on the temperature range considered.

99 GENERAL AND MISCELLANEOUS↗

Off-Road Vehicles Research Workshop (Summary Report)

This report summarizes the off-road vehicles stakeholder workshop that was focused on research, technical challenges, and future direction related to off-road vehicles and held at Argonne National Laboratory in October 2018. The views expressed in this report are those of the workshop participants. Topics discussed and included in this report are engine efficiency and emissions; efficient fluid power; and system integration, control, and new technologies. The purposes of this workshop were to: 1) Discuss and exchange information on the current state of technology for off-road vehicles; 2) Work collectively to address the technical challenges; and 3) Help shape the future direction for off-road vehicles research and development (R&D). The report highlights some key points, takeaways, and technical challenges and ideas to inform DOE R&D programs for the off-road sector. The workshop objectives were to: • Identify the barriers to cost-effective, high-efficiency, off-road vehicles; • Identify pre-competitive research topics that could have the biggest impact in overcoming barriers; and • Identify metrics that should be applied to program progress and ambitious but realistic goals. Customer acceptance, reliability, and system durability are some of the market barriers to new technology that were discussed during the workshop. Participants agreed that a comprehensive strategy is required to explore ways to improve engine efficiency while lowering emissions (i.e., NO x , GHG, etc.) and at the same time, meet customer needs and expectations. A full system optimization was recommended for off-road vehicles. It was noted that off-road vehicles are very diverse with a wide range of engine size and vehicle applications. A need for R&D for transient operations and other operating conditions was identified, as off-road vehicles are currently optimized for steady state. Fuel type for these vehicles has an important role. Fuel cost and fuel delivery to the work-site are challenging for any new fuel. Increased vehicle electrification is one of the new technologies discussed during the workshop. Electric propulsion for off-road vehicles has limited applications in the near term, but hybridization seems more promising. Furthermore, electrification requires better batteries and, possibly, the use of higher-voltage systems. Developing more efficient component technologies, including pumps, motors, and valves, is important for more efficient fluid power systems. New work-circuit architectures that can decrease throttling losses and better integrate the work circuit and engine can offer significant efficiency gains. Autonomous vehicles for off-road sectors were also discussed. Autonomous vehicles for off-road space are very appealing for some markets due to shortage in skilled labor and its significant impact on productivity, vehicle weight, and therefore, energy use and emissions. Autonomous driving for mining and farming applications is more feasible because the routes are predefined, but for other applications, such as forestry and construction vehicles, autonomous driving would be very challenging.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

ANALYSIS OF A HIGH TEMPERATURE GAS-COOLED REACTOR POWERED HIGH TEMPERATURE ELECTROLYSIS HYDROGEN PLANT

An updated reference design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production has been developed. The HTE plant is powered by a high-temperature gas-cooled reactor (HTGR) whose configuration and operating conditions are based on the latest design parameters planned for the Next Generation Nuclear Plant (NGNP). The current HTGR reference design specifies a reactor power of 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 322°C and 750°C, respectively. The reactor heat is used to produce heat and electric power to the HTE plant. A Rankine steam cycle with a power conversion efficiency of 44.4% was used to provide the electric power. The electrolysis unit used to produce hydrogen includes 1.1 million cells with a per-cell active area of 225 cm2. The reference hydrogen production plant operates at a system pressure of 5.0 MPa, and utilizes a steam-sweep system to remove the excess oxygen that is evolved on the anode (oxygen) side of the electrolyzer. The overall system thermal-to-hydrogen production efficiency (based on the higher heating value of the produced hydrogen) is 42.8% at a hydrogen production rate of 1.85 kg/s (66 million SCFD) and an oxygen production rate of 14.6 kg/s (33 million SCFD). An economic analysis of this plant was performed with realistic financial and cost estimating The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a competitive cost. A cost of $3.03/kg of hydrogen was calculated assuming an internal rate of return of 10% and a debt to equity ratio of 80%/20% for a reactor cost of $2000/kWt and $2.41/kg of hydrogen for a reactor cost of $1400/kWt.

08 HYDROGEN↗

High power cascade diode lasers emitting near 2 μm

High-power two-stage cascade GaSb-based type-I quantum well diode lasers emitting near 2 μm were designed and fabricated. Coated devices with cavity length of 3 mm generated about 2 W of continuous wave power from 100-μm-wide aperture at the current of 6 A. The power conversion efficiency peaked at 20%. Carrier recycling between quantum well gain stages was realized using band-to-band tunneling in GaSb/AlSb/InAs heterostructure complemented with optimized electron and hole injector regions. Design optimization eliminated parasitic optical absorption and thermionic emission, and included modification of the InAs quantum wells of electron and composition and doping profile of hole injectors. Utilization of the cascade pumping scheme yielded 2 μm lasers with improved output power and efficiency compared to existing state-of-the-art diodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimizing energy yield of monolithic perovskite/silicon tandem solar cells in real-world Conditions: The impact of luminescent coupling

Efficient light management is key to maximizing power conversion efficiency (PCE) in monolithic perovskite/silicon tandem solar cells. Achieving peak efficiency requires closely matched current generation in all junctions, especially in integrated configurations. However, real-world conditions vary significantly due to factors such as sunlight spectrum, diffuse-to-direct sunlight ratio, angular distribution of light, subcell temperature coefficients, and ground reflection. This study introduces a comprehensive optical and device simulation to optimize perovskite/silicon tandem cells, considering experimental luminescent coupling (LC) efficiency and its dependence on working conditions, alongside variations in radiative recombination, effect of temperature on absorptivity spectra, and cloud cover. Our results show potential energy yield improvements of up to 1.4 % with LC, based on current perovskite radiative recombination records, and up to 4 % with direct bandgap materials. Although radiative recombination's dependence on excitation intensity reduces output power and requires thicker absorbers, LC compensates for these losses. LC also lowers the optimized bandgap for the perovskite top cell from 1.72 eV to 1.64–1.68 eV, or even lower in regions with redshifted irradiance. Additionally, optimization revealed that thinner silicon bottom cells require a higher perovskite top cell bandgap, impacting the balance between fabrication cost and cell stability.

14 SOLAR ENERGY↗

High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

Tandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm -2 . With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

36 MATERIALS SCIENCE↗

Rapid Development of Hybrid Perovskites and Novel Tandem Architectures

Multijunction solar cells based on epitaxially grown III-V materials hold the record for solar energy power conversion efficiency (PCE). However, due to the high cost of fabricating these devices, they are typically only used for concentrator cells and space applications. The overarching goal of this project was to develop low-cost printable hybrid perovskite (HP) materials appropriate and optimized for tandem solar cells with high power conversion efficiency under “1 Sun” illumination. Key results and findings over the course of the project we: Developed higher-performance high-bandgap (1.75 eV) perovskite materials and devices. In particular, we explored tens-of-thousands of compositions for high bandgap perovskites, achieving quasi-Fermi level splitting of 1.35 eV for a 1.75 eV bandgap material. We achieved World-record open circuit voltages from single junction p-i-n devices, 1.24 V from 1.75 eV bandgap material, which is what is preferable for tandems with a PCE of 14.3% using a guanidinium/formanadinium/ cesium alloyed lead iodobromide. We also developed a series of World-record efficiency devices at higher band-gaps based on 2D/3D perovskites using PEA. Developed higher-performance low-bandgap (1.35 eV) perovskite materials and devices. In particular, we developed a 1.35 eV bandgap perovskite of composition MAPb0.5Sn0.5(I0.8Br0.2)3 and showed its superiority to MAPb0.75Sn0.25I3. High efficiency solar cells were fabricated using PEDOT:PSS and doped-ICBA as HTL and ETL, respectively. Short circuit currents of 25.7 mA/cm2 and PCEs of 17.1% were obtained. Developed mechanically stacked 4-terminal CIGS-Perovskite tandems with PCE of 18.8% and monolithic 2-terminal CIGS-Perovskite tandems with PCE of 8.5%. The low efficiency of the monolithic device is a result of the high surface roughness of the solution processed CIGS bottom cells. This is not an intrinsic problem for CIGS-perovskite tandems, but does mean that smooth evaporated or sputtered CIGS films likely need to be used, unless a polishing step is employed. Developed monolithic 2-terminal Perovskite-Perovskite tandems with a stabilized PCE of 18.5%. This was the World-record perovskite-perovskite monolithic tandems for over a year in 2017-2018. Revealed that light is not an essential component of the so-called “light-induced” phase segregation. By using charge injection in the dark and electroluminescence, we showed that the presence of electrons in the conduction band and hole in the valence band is sufficient to drive the nearly ubiquitously observed phase segregation in high bandgap perovskites. Developed a new method to simultaneously measure absolute intensity photoluminescence and photoconductivity and use them to obtain simultaneous in-situ measurement of quasi-Fermi level splitting and diffusion length. This is important since it provides a proxy for device Voc and device Jsc. In addition, 67 papers were published with support from this award that detail many more advances in the field, including numerous publications in high impact journals such as Nature Photonics, Advanced Materials, ACS Energy Letters, and Energy and Environmental Science.

14 SOLAR ENERGY↗

Cascade type-I quantum well diode lasers emitting 960 mW near 3 μm

The cascade pumping scheme reduced the threshold current density of high power type-I quantum well GaSb-based λ ∼ 3 μm diode lasers down to ∼100 A/cm{sup 2} at room temperature. Laser heterostructures had single GaInAsSb quantum well gain stages connected in series by means of GaSb/AlSb/InAs tunnel junctions followed by InAs/AlSb electron injectors. Devices with densely stacked two and three gain stages and 100-μm-wide aperture demonstrated peak power conversion efficiency of 16% and continuous wave output power of 960 mW. Corresponding narrow ridge lasers demonstrated above 100 mW of output power. The experiment showed that the bandwidth of the gain and its rate of increase with current depended strongly on the thickness of AlSb layer separating electron injectors from quantum wells. The possible impact of electron injector interfaces and ionized impurities on the carrier scattering and recombination in the active quantum well is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Utility-Scale Power Router: Dynamic Control of Grid Assets Using Direct AC Converter Cells

ADEPT Project: Georgia Tech is developing a cost-effective, utility-scale power router that uses an enhanced transformer to more efficiently direct power on the grid. Existing power routing technologies are too expensive for widespread use, but the ability to route grid power to match real-time demand and power outages would significantly reduce energy costs for utilities, municipalities, and consumers. Georgia Tech is adding a power converter to an existing grid transformer to better control power flows at about 1/10th the cost of existing power routing solutions. Transformers convert the high-voltage electricity that is transmitted through the grid into the low-voltage electricity that is used by homes and businesses. The added converter uses fewer steps to convert some types of power and eliminates unnecessary power storage, among other improvements. The enhanced transformer is more efficient, and it would still work even if the converter fails, ensuring grid reliability.

ADEPT↗

Enhanced efficiency of large-area dye-sensitized solar cells by light-scattering effect using multilayer TiO2 photoanodes

Highlights: • DSSCs with an active area of 100.6 cm{sup 2} and light-scattering layers are fabricated. • The light-scattering effect is shown to enhance the light absorption in the red part of the solar spectrum. • The light-scattering effect is more important than the dye adsorption capacity for TiO{sub 2} photoanodes with same thickness. • The highest power conversion efficiency of 7.52% has been obtained by the DSSC with optimized conditions. - Abstract: In order to reduce the usage of photoactive dye and improve light harvesting by the photoanode of dye-sensitized solar cells (DSSCs), TiO{sub 2} scatting layers were introduced. We have investigated the light-scattering effect in large-area DSSCs with an active area of 100.6 cm{sup 2} that contain diffusing or reflective layers. The result shows that the light-scattering effect is more important than the dye adsorption capacity for the light harvesting property of TiO{sub 2} photoanodes with same thickness, and the light-scattering effect is shown to enhance the light absorption in the red part of the solar spectrum. The highest power conversion efficiency of 7.52% has been obtained by the cell with optimized high dye adsorption layer and high light-scattering layer, which is 9.5% higher than that of the cell without the light-scattering layer (6.87%).

14 SOLAR ENERGY↗

Near-Infrared Ternary Tandem Solar Cells

The paucity of near-infrared (NIR) organic materials with high absorption at long wavelengths, combined with large diffusion lengths and charge mobilities, is an impediment to progress in achieving high-efficiency organic tandem solar cells. Here a subcell is employed within a series tandem stack that comprises a solution-processed ternary blend of two NIR-absorbing nonfullerene acceptors and a polymer donor combined with a small-molecular-weight, short-wavelength fullerene-based subcell grown by vacuum thermal evaporation. Additionally, the ternary cell achieves a power conversion efficiency of 12.6 ± 0.3% with a short-circuit current of 25.5 ± 0.3 mA cm -2 , an open-circuit voltage of 0.69 ± 0.01 V, and a fill factor of 0.71 ± 0.01 under 1 sun, AM 1.5G spectral illumination. The success of this device is a result of the nearly identical offset energies between the lowest unoccupied molecular orbitals (LUMOs) of the donors with the highest occupied molecular orbital (HOMO) of the acceptor, resulting in a high open-circuit voltage. A tandem structure with an antireflection coating combining these subcells demonstrates a power conversion efficiency of 15.4 ± 0.3%.

36 MATERIALS SCIENCE↗

Importance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells

Tin-based halide perovskite materials have been successfully employed in lead-free perovskite solar cells, but the tendency of these materials to form leakage pathways from p-type defect states, mainly Sn 4+ and Sn vacancies, causes poor device reproducibility and limits the overall power conversion efficiencies. Here, we present an effective process that involves a reducing vapor atmosphere during the preparation of tin-based halide perovskite solar cells to solve this problem, using MASnI 3 , CsSnI 3 and CsSnBr 3 as the representative absorbers. This process enables the fabrication of remarkably improved solar cells with power conversion efficiencies of 3.89%, 1.83% and 3.04% for MASnI 3 , CsSnI 3 and CsSnBr 3 respectively. The reducing vapor atmosphere process results in more than 20% reduction of Sn 4+ /Sn 2+ ratios, which leads to greatly suppressed carrier recombination, to a level comparable to their lead-based counterparts. These results mark an important step towards a deeper understanding of the intrinsic tin-based halide perovskite materials, paving the way to the realization of low-cost and lead-free Sn-based halide perovskite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High 400 °C operation temperature blue spectrum concentration solar junction in GaInN/GaN

Transparent wide gap junctions suitable as high temperature, high flux topping cells have been achieved in GaInN/GaN by metal-organic vapor phase epitaxy. In structures of 25 quantum wells (QWs) under AM1.5G illumination, an open circuit voltage of 2.1 V is achieved. Of the photons absorbed in the limited spectral range of <450 nm, 64.2% are converted to electrons collected at the contacts under zero bias. At a fill factor of 45%, they account for a power conversion efficiency of38.6%. Under concentration, the maximum output power density per sun increases from 0.49 mW/cm{sup 2} to 0.51 mW/cm{sup 2} at 40 suns and then falls 0.42 mW/cm{sup 2} at 150 suns. Under external heating, a maximum of 0.59 mW/cm{sup 2} is reached at 250 °C. Even at 400 °C, the device is fully operational and exceeds room temperature performance. A defect analysis suggests that significantly higher fill factors and extension into longer wavelength ranges are possible with further development. The results prove GaInN/GaN QW solar junctions a viable and rugged topping cell for concentrator photovoltaics with minimal cooling requirements. By capturing the short range spectrum, they reduce the thermal load to any conventional cells stacked behind.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗