SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We show that fidelity, under the standard definitions is not sufficient to assess quantum sources, and we propose a new sufficient to assess quantum sources, and we propose a new measure of suitability that necessarily depends on the application for the source. We consider the performance of single-photon guns in the context of quantum key distribution (QKD) and interferometric quantum computation.
We discuss a simple ID model of the modification of Planck blackbody radiation by photonic band-gap materials (PBGs).
We report a novel oscillator for photonic RF systems. This oscillator is capable of generating
The beam pattern of a linear phased-array antenna system employing a photonic feed network is analyzed using a model for the individual feed element noise including both additive and multiplicative equivalent noise generators.
This paper presents an overview of the Hyperspectral Microwave Photonic Instrument (HyMPI), a 2021 NASA Instrument Incubation Proposal funded project aimed at developing the very first hyperspectral microwave sensor to augment thermodynamic sounding capability from space, with a focus on the Earth’s Planetary Boundary Layer. This research responds to the recommendation expressed in the 2018 National Academies of Sciences decadal survey to accelerate the readiness of high-priority PBL observables not feasible for cost-effective spaceflight in 2017-2027. This paper provides an overview on HyMPI’s design, configured as the objective instrument concept needed to fly in the future PBL mission and presents preliminary trade studies aim at demonstrating HyMPI’s enhanced thermodynamic sounding skill in the Earth’s Planetary Boundary Layer over conventional microwave sounders from the current Program of Record.
We present an overview of the Hyperspectral Microwave Photonic Instrument (HyMPI), a NASA Instrument Incubation Proposal funded research project aimed at developing a hyperspectral microwave instrument intended for enhanced remote sensing of atmospheric temperature and water vapor from space. This paper provides preliminary results on HyMPI’s spectral and noise characteristics and a preliminary demonstration of its enhanced water vapor sensitivity and vertical resolution, with a particular focus on the Earth’s Planetary Boundary Layer.
This paper presents an overview of the Hyperspectral Microwave Photonic Instrument (HyMPI), a 2021 NASA Instrument Incubation Proposal funded project aimed at developing the very first hyperspectral microwave sensor to augment thermodynamic sounding capability from space, with a focus on the Earth’s Planetary Boundary Layer. This research responds to the recommendation expressed in the 2018 National Academies of Sciences decadal survey to accelerate the readiness of high-priority PBL observables not feasible for cost-effective spaceflight in 2017-2027. This paper provides an overview on HyMPI’s design, configured as the objective instrument concept needed to fly in the future PBL mission and presents preliminary trade studies aim at demonstrating HyMPI’s enhanced thermodynamic sounding skill in the Earth’s Planetary Boundary Layer over conventional microwave sounders from the current Program of Record.
More than half of the sun-like stars are in binary systems or have companions that hinder the search for planets around them using traditional technologies. There are only 69 FGK dwarfs within ten pc that can harbor true earth analogs. Direct imaging can detect and study the habitability of those targets measuring the chemical composition of the atmosphere, and astrometry can measure the planet's mass. We use Multi-Star Wavefront Control (MSWC), a technique that removes stellar leakage from both stellar components to enable direct imaging of binary systems. Currently, there is a technology demonstration experiment of MSWC for the Roman coronagraph instrument at the High Contrast Imaging Testbeds operated at JPL. One of the challenges for this experiment is to produce a binary source where both stars are incoherent with each other at close physical separation. On the other hand, to measure masses, it is possible to obtain relative astrometry measurements between the binary. The TOLIMAN concept proposes to use a diffractive pupil to calibrate the distortion and detector effects to reach 1uas astrometric accuracy. JPL currently has a laboratory to demonstrate this technology, which faces the same challenge as the MSWC project of producing two incoherent nearby sources. We developed Photonic Chips with multiple waveguides in Silicon Nitride for both projects to create incoherent single sources as close as 15um. In this paper, we present the concept application, the chips design, and the first results.
This talk covers possible applications for the monoenergetic photon beam currently under development at Lawrence Berkeley National Laboratory's BELLA Center.
Abstract Higher‐order topological insulators (HOTIs) represent a new type of topological system, supporting boundary states localized over boundaries, two or more dimensions lower than the dimensionality of the system itself. Interestingly, photonic HOTIs can possess a richer physics than their original condensed matter counterpart, supporting conventional HOTI states based on tight‐binding coupling, and a new type of topological HOTI states enabled by long‐range interactions. Here, a new mechanism to establish all‐dielectric infrared HOTI metasurfaces exhibiting both types of HOTI states is proposed, supported by a topological transition accompanied by the emergence of topological Wannier‐type polarization. Two kinds of near‐field experimental studies are performed: i) the solid immersion spectroscopy and ii) near‐field imaging using scattering scanning near‐field optical microscopy to directly observe the topological transition and the emergence of HOTI states of two types. It is shown that the near‐field profiles indicate the displacement of the Wannier center across the topological transition leading to the topological dipole polarization and emergence of the topological boundary states. The proposed all‐dielectric HOTI metasurface offers a new approach to confine the optical field in micro‐ and nano‐scale topological cavities and thus paves the way to achieve a novel nanophotonic technology.
In recent years, hybrid perovskite single crystalline solid-state detectors have shown promise in γ-ray spectroscopy. Here, the γ-ray photon induced electrical pulses are investigated, which are produced by perovskite solid-state detectors made with the commonly used methylammonium lead tribromide crystals with chlorine incorporation. Under low electric field detector operation, slow pulses generated by γ-rays with average rise times of 65 µs are observed, which decreases to 20 µs when a higher electrical field of 500 V cm -1 is applied. However, the baseline becomes noisy quickly, which prevents collection of clean pulses for spectra construction. Further, by systematically measuring the temperature dependence and current–voltage characteristics, such instability is attributed to the local ion migration under electrical field creating a fluctuating dark noise, which presents a major challenge in perovskite γ-ray detector technologies. It is demonstrated that cycling the bias between positive and negative polarity can stabilize the detector, allowing for longer periods of pulse accumulation for generating energy resolved spectra with resolutions of ≈35% at 59.6 keV and ≈25% at 662 keV at room temperature. The study indicates that the main limiting factors of perovskite-based γ-ray detectors are slow rise times and bias instability. Finally, these challenges must be properly addressed to achieve reproducible, high-resolution γ-ray detection.
We developed a novel HTS engineering platform to optimize photoenzymatic activity. The improvements in variants were correlated to an increase in enzymatic photon efficiency. Here, transient absorption spectroscopy revealed a shift from a stepwise to a concerted mechanism. The platform was expanded to improve the synthesis of γ, δ, ϵ-lactams, and acyclic amides.
Modern agriculture couples photosynthetic energy with human-applied energy supplements (e.g., fertilizers, labor, cultivation) to feed a growing population. These energy supplements usually come from fossil fuels, presenting an opportunity to decrease fossil fuel required per calorie by improving photosynthetic efficiency. To quantify how improving photosynthetic efficiency would decrease the supplemental energy needed per calorie, we present a “photon to plate” life cycle analysis of energy flows (photosynthetic and human-applied) needed to produce fresh-cut fries. Our results show that photosynthetic inefficiencies require ~80 times the energy used to cultivate, harvest, transport and prepare fries for consumption and that improvements to photosynthesis could reduce the energy applied by humans per calorie by almost 40%. This study highlights the magnitude of energy used during photosynthesis and the potential for photosynthetic improvements to increase agricultural sustainability.
Here, the structure and dynamics of polystyrene (PS)-b-poly(ethylene oxide) block copolymers (BCPs) are studied. The BCPs exhibit microphase-separated cylindrical and lamellar morphologies. Structural dynamics are measured with X-ray photon correlation spectroscopy in the small-angle regime. Morphologies and domain sizes are evaluated using small-angle X-ray scattering (SAXS), scanning electron microscopy, and atomic force microscopy. Different solvent processing conditions are investigated. Grain sizes evaluated using SAXS are found to depend on processing only for the rubbery majority BCP. The structural relaxation times are examined as a function of PS volume fraction, temperature, morphology, and structural sizes. Well above the glass transition temperature (T g ) of PS, all samples exhibit stretched autocorrelation decays and diffusive dynamics. Near T g of PS, the dynamics of all samples are anomalous with compressed autocorrelation decays and hyperdiffusive dynamics. This transition occurs at 153 °C or 1.13 T g of PS. In the diffusive regime (at high temperature), structural relaxation times are dependent on the processing method. Near PS T g (at low temperature), structural relaxation times scale with the PS volume fraction. Structural relaxation times do not correlate with grain size, indicating that the out-of-equilibrium state of PS dominates the structural dynamics of these strongly phase-segregated BCPs.
In this work, the application of machine learning is demonstrated for rapid and accurate extraction of plasmonic particles cluster geometries from hyperspectral image data via a dual variational autoencoder (dual-VAE). In this approach, the information is shared between the latent spaces of two VAEs acting on the particle shape data and spectral data, respectively, but enforcing a common encoding on the shape-spectra pairs. It is shown that this approach can establish the relationship between the geometric characteristics of nanoparticles and their far-field photonic responses, demonstrating that hyperspectral darkfield microscopy can be used to accurately predict the geometry (number of particles, arrangement) of a multiparticle assemblies below the diffraction limit in an automated fashion with high fidelity (for monomers (0.96), dimers (0.86), and trimers (0.58). This approach of building structure-property relationships via shared encoding is universal and should have applications to a broader range of materials science and physics problems in imaging of both molecular and nanomaterial systems.
Many extensions of the Standard Model, including those with dark matter particles, propose new mediator particles that decay into hadrons. This paper presents a search for such low mass narrow resonances decaying into hadrons using 140 fb −1 of proton-proton collision data recorded with the ATLAS detector at a centre-of-mass energy of 13 TeV. The resonances are searched for in the invariant mass spectrum of large-radius jets with two-pronged substructure that are recoiling against an energetic photon from initial state radiation, which is used as a trigger to circumvent limitations on the maximum data recording rate. This technique enables the search for boosted hadronically decaying resonances in the mass range 20–100 GeV hitherto unprobed by the ATLAS Collaboration. The observed data are found to agree with Standard Model predictions and 95% confidence level upper limits are set on the coupling of a hypothetical new spin-1 Z′ resonance with Standard Model quarks as a function of the assumed Z′-boson mass in the range between 20 and 200 GeV.
A search is presented for the production of the Standard Model Higgs boson in association with a high-energy photon. With a focus on the vector-boson fusion process and the dominant Higgs boson decay into b-quark pairs, the search benefits from a large reduction of multijet background compared to more inclusive searches. Results are reported from the analysis of 132 fb –1 of pp collision data at $\sqrt{s}$ = 13 TeV collected with the ATLAS detector at the LHC. The measured Higgs boson signal yield in this final-state signature is 1.3 ± 1.0 times the Standard Model prediction. The observed significance of the Higgs boson signal above the background is 1.3 standard deviations, compared to an expected significance of 1.0 standard deviations.
Fixed-target experiments using primary electron beams can be powerful discovery tools for light dark matter in the sub-GeV mass range. The Light Dark Matter eXperiment (LDMX) is designed to measure missing momentum in high-rate electron fixed-target reactions with beam energies of 4 GeV to 16 GeV. A prerequisite for achieving several important sensitivity milestones is the capability to efficiently reject backgrounds associated with few-GeV bremsstrahlung, by twelve orders of magnitude, while maintaining high efficiency for signal. The primary challenge arises from events with photo-nuclear reactions faking the missing-momentum property of a dark matter signal. We present a methodology developed for the LDMX detector concept that is capable of the required rejection. By employing a detailed Geant4-based model of the detector response, we demonstrate that the sampling calorimetry proposed for LDMX can achieve better than 10 -13 rejection of few-GeV photons. This suggests that the luminosity-limited sensitivity of LDMX can be realized at 4 GeV and higher beam energies.