Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Calcium and zinc differentially affect the structure of lipid membranes

Interactions of calcium (Ca 2+ ) and zinc (Zn 2+ ) cations with biomimetic membranes made of dipalmitoylphosphatidylcholine (DPPC) were studied by small angle neutron diffraction (SAND). Experiments show that the structure of these lipid bilayers is differentially affected by the two divalent cations. Initially, both Ca 2+ and Zn 2+ cause DPPC bilayers to thicken, while further increases in Ca 2+ concentration result in the bilayer thinning, eventually reverting to having the same thickness as pure DPPC. The binding of Zn 2+ , on the other hand, causes the bilayers to swell to a maximum thickness, and the addition of more Zn 2+ does not result in a further thickening of the membrane. Agreement between our results obtained using oriented planar membranes and those from vesicular samples implies that the effect of cations on bilayer thickness is the result of electrostatic interactions, rather than geometrical constraints due to bilayer curvature. This notion is further reinforced by MD simulations. Lastly, the radial distribution functions reveal a strong interaction between Ca 2+ and the phosphate oxygens, while Zn 2+ shows a much weaker binding specificity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Structural Characterization of β-Agostic Bonds in Pd-Catalyzed Polymerization

β-agostic Pd complexes are critical intermediates in catalytic reactions, such as olefin polymerization and Heck reactions. Pd β-agostic complexes, however, have eluded structural characterization, due to the fact that these highly unstable molecules are difficult to isolate. In this paper, we report the single-crystal X-ray and neutron diffraction characterization of β-agostic (α-diimine)Pd–ethyl intermediates in polymerization. Short C α –C β distances and acute Pd–C α –C β bond angles combined serve as unambiguous evidence for the β-agostic interaction. Finally, characterization of the agostic structure and the kinetic barrier for β-H elimination offer important insight into the fundamental understanding of agostic bonds and the mechanism of polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Correction to Unveiling the Role of Al 2 O 3 in Preventing Surface Reconstruction During High-Voltage Cycling of Lithium-Ion Batteries

A correction to this article was necessary to replace the original Figure 2 with the actual data in the revised Figure 2 shown here. An error was made while preparing the graphs from the neutron diffraction analysis software, and panel a was accidentally inserted into the panel b–d spots, such that all four panels were replicates. Since the original analysis of the data collected was made correctly, the conclusions and key points related to this section and the whole article remain unchanged. The revised goodness factors are slightly different because the refinements were repeated with small changes to the refinement conditions. The corresponding author has obtained approval from all coauthors in the article prior the submission of the Correction. The authors apologize for any inconveniences caused.

25 ENERGY STORAGE↗
DOE OSTI2021

Li 0.625 Al 0.125 H 0.25 Cl 0.75 O 0.25 Superionic Conductor with Disordered Rock-Salt Structure

Solid-state Li-ion conductors are of broad interest in electrochemical energy storage, especially in solid-state Li batteries that serve as a promising alternative for the next-generation safe and high-energy-density batteries. Exploring solid-state superionic conductors is significant for the development of solid-state Li batteries with high performance. Herein, we report a disordered rock-salt (A 1 B 1 )-structured solid electrolyte (Li 0.625 Al 0.125 H 0.25 )(Cl 0.75 O 0.25 ) (abbr. LAHCO) that was synthesized using Li 2 OHCl and LiAlCl 4 as precursors. Neutron diffraction reveals that Li, Al, and H atoms occupy the A sites and O and Cl atoms occupy the B sites in the A 1 B 1 structure for pure LAHCO. The LAHCO compound with excess LiAlCl 4 shows the highest Li + ionic conductivity of ~10 –4 S cm –1 at room temperature due to the disordering induced by configurational entropy as well as the entropy of mixing. Moreover, LAHCO–LiAlCl 4 solid electrolyte exhibits a stable polarization voltage under a current density of 5–50 μA cm –2 in Li symmetric cells. Furthermore, this work not only explicates the importance of Li-ion conductors with a rock-salt structure but also contributes toward the development of solid-state Li-ion conductors for broad applications.

25 ENERGY STORAGE↗
DOE OSTI2018

Crystal Structure and Transport Properties of Oxygen-Deficient Perovskite Sr 0.9 Y 0.1 CoO 3-δ

The present work reports a systematic study on temperature-dependent local crystal structure, oxygen stoichiometry, and electrical/electrochemical properties of an oxygen-deficient Sr 0.9 Y 0.1 CoO 3-δ (SYC10) perovskite using variable-temperature neutron diffraction (VTND), thermal gravimetric analysis, and electrical/electrochemical methods, respectively. The VTND reveals that the crystal symmetry of SYC10 remains P4/mmm tetragonal up to 900 °C. The tetragonal symmetry reflects the net effects of temperature and oxygen stoichiometry on crystal symmetry. The observed p-type electronic conductivity behavior originates from the charge-ordering between the two distinctive Co-sites. The partial oxide-ion conductivity and diffusivity obtained from oxygen permeation measurements are 2.3 × 10 –2 S cm –1 and 7.98 × 10–8 cm 2 /s at 800 °C in air, respectively. The electrochemical oxygen reduction reaction kinetics of the SYC10 cathode is primarily limited by the charge-transfer process at low temperatures (600–650 °C) and oxide-ion migration from the cathode into the electrolyte at high temperatures (700–800 °C).

36 MATERIALS SCIENCE↗
DOE OSTI2019

Novel Ordered Rocksalt-Type Lithium-Rich Li 2 Ru 1–x Ni x O 3-δ (0.3 ≤ x ≤ 0.5) Cathode Material with Tunable Anionic Redox Potential

In this work, a series of ordered rocksalt (OR) type Li-rich Li 2 Ru 1–x Ni x O 3-δ (LRN x O, 0.3 ≤ x ≤ 0.5) are successfully synthesized and investigated for the first time. X-ray diffraction and neutron powder diffraction patterns exhibit an obvious phase transition from layered to an OR structure as the Ni content gradually increases from x = 0 to x = 0.5, which leads to different electrochemical behaviors. In the case of OR-LRN 0.4 O, an ~350 mV decrease of the oxygen oxidation potential compared with Li 2 RuO 3 (LRO) is observed from around 4.2 to 3.85 V, which is confirmed by both X-ray photelectron O 1s spectra and dQ/dV results. Additionally, the role of Ni substitution on the oxygen redox reaction is studied by first-principles calculations, and it is concluded that the formation of the OR structure caused by Ni substitution is the main reason for lowering the oxygen oxidation potential. In addition, the average discharge voltage of OR-LRN 0.4 O is also enhanced compared with LRO. This work provides a novel innovative strategy to modulate and control the oxygen anion redox reaction for high-energy-density Li-rich materials, which shed light on the fundamental understanding and optimizing of the anion redox process in Li-rich materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Kinetically Controlled Linker Binding in Rare Earth-2,5-Dihydroxyterepthalic Acid Metal–Organic Frameworks and Its Predicted Effects on Acid Gas Adsorption

In the pursuit of highly stable and selective metal–organic frameworks (MOFs) for the adsorption of caustic acid gas species, an entire series of rare earth MOFs have been explored. Each of the MOFs in this series (RE-DOBDC; RE = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu; DOBDC = 2,5-dihydroxyterepthalic acid) was synthesized in the tetragonal space group I4/m. Crystallized MOF samples, specifically Eu-DOBDC, were seen to have a combination of monodentate and bidentate binding when synthesized under typical reaction conditions, resulting in a contortion of the structure. However, extended crystallization times determined that this binding is kinetically controlled and that the monodentate binding option was crystallographically eliminated by extended reaction times at higher temperatures. Furthermore, this series allows for the direct study of the effect of the metal center on the structure of the of the MOF; herein, the lanthanide metal ionic radii contraction across the periodic table results in a reduction of the MOF pore size and lattice parameters. Scanning electron microscopy–energy-dispersive spectroscopy was used to investigate the stages of crystal growth for these RE-DOBDC MOFs. All MOFs, except Er-DOBDC had a minimum of two stages of growth. These analogues were demonstrated by analysis of neutron diffraction (PND) to exhibit a cooperative rotational distortion of the secondary building unit, resulting in two crystallographically distinct linker sublattices. Computational modeling efforts were used to show distinct differences on acid gas (NO 2 and SO 2 ) binding energies for RE-DOBDC MOFs when comparing the monodentate/bidentate combined linker with the bidentate-only linker crystal structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Understanding the role of NH 4 F and Al 2 O 3 surface co-modification on lithium-excess layered oxide Li 1.2 Ni 0.2 Mn 0.6 O 2

In this work we prepared Li 1.2 Ni 0.2 Mn 0.6 O 2 (LNMO) using a hydroxide co-precipitation method and investigated the effect of co-modification with NH 4 F and Al 2 O 3 . After surface co-modification, the first cycle Coulombic efficiency of Li 1.2 Ni 0.2 Mn 0.6 O 2 improved from 82.7% to 87.5%, and the reversible discharge capacity improved from 253 to 287 mAh g –1 at C/20. Moreover, the rate capability also increased significantly. A combination of neutron diffraction (ND), high-resolution transmission electron microscopy (HRTEM), aberration-corrected scanning transmission electron microscopy (a-STEM)/electron energy loss spectroscopy (EELS), and X-ray photoelectron spectroscopy (XPS) revealed the changes of surface structure and chemistry after NH 4 F and Al 2 O 3 surface co-modification while the bulk properties showed relatively no changes. These complex changes on the material s surface include the formation of an amorphous Al 2 O 3 coating, the transformation of layered material to a spinel-like phase on the surface, the formation of nanoislands of active material, and the partial chemical reduction of surface Mn 4+ . Such enhanced discharge capacity of the modified material can be primarily assigned to three aspects: decreased irreversible oxygen loss, the activation of cathode material facilitated with preactivated Mn 3+ on the surface, and stabilization of the Ni-redox pair. In conclusion, these insights will provide guidance for the surface modification in high-voltage-cathode battery materials of the future.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Investigating the Mechanism of Reversible Lithium Insertion into Anti-NASICON Fe 2 (WO 4 ) 3

The gram-scale preparation of Fe 2 (WO 4 ) 3 by a new solution-based route and detailed characterization of the material are presented. The resulting Fe 2 (WO 4 ) 3 undergoes a reversible electrochemical reaction against lithium centered around 3.0 V with capacities near 93% of the theoretical maximum. Evolution of the Fe 2 (WO 4 ) 3 structure upon lithium insertion and deinsertion is probed using a battery of characterization techniques, including in situ X-ray diffraction, neutron total scattering, and X-ray absorption spectroscopy (XAS). A structural transformation from monoclinic to orthorhombic phases is confirmed during lithium intercalation. XAS and neutron total scattering measurements verify that Fe 2 (WO 4 ) 3 consists of trivalent iron and hexavalent tungsten ions. As lithium ions are inserted into the framework, iron ions are reduced to the divalent state, while the tungsten ions are electrochemically inactive and remain in the hexavalent state. Lastly, lithium insertion occurs via a concerted rotation of the rigid polyhedra in the host lattice driven by electrostatic interactions with the Li + ions; the magnitude of these polyhedral rotations was found to be slightly larger for Fe 2 (WO 4 ) 3 than for the Fe 2 (MoO 4 ) 3 analog.

25 ENERGY STORAGE↗
DOE OSTI2018

Correlating Transport and Structural Properties in Li 1+ x Al x Ge 2– x (PO 4 ) 3 (LAGP) Prepared from Aqueous Solution

Li 1+ x Al x Ge 2– x (PO 4 ) 3 (LAGP) is a solid lithium-ion conductor belonging to the NASICON family, representing the solid solution of LiGe 2 (PO 4 ) 3 and AlPO 4 . The typical syntheses of LAGP either involve high-temperature melt-quenching, which is complicated and expensive, or a sol–gel process requiring costly organic germanium precursors. Herein, we report a simple method based on aqueous solutions without the need of ethoxide precursors. Using synchrotron and neutron diffraction, the crystal structure, the occupancies for Al and Ge, and the distribution of lithium were determined. Substitution of germanium by aluminum allows for an increased Li + incorporation in the material and the actual Li + content in the sample increases with the nominal Li + content and a solubility limit is observed for higher aluminum content. By means of impedance spectroscopy, an increase in the ionic conductivity with increasing lithium content is observed. Whereas the lithium ionic conductivity improves, due to the increasing carrier density, the bulk activation energy increases. This correlation suggests that changes in the transport mechanism and correlated motion may be at play in the Li 1+ x Al x Ge 2– x (PO 4 ) 3 solid solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding the Reactivity and Decomposition of a Highly Active Iron Pincer Catalyst for Hydrogenation and Dehydrogenation Reactions

The iron pincer complex ( iPr PNP)Fe(H)(CO) (1, iPr PNP – = N(CH 2 CH 2 PiPr 2 ) 2 - ) is an active (pre)catalyst for many hydrogenation and dehydrogenation reactions. This is in part because 1 can reversibly add H 2 across the iron-amide bond to form ( iPr PN H P)Fe(H) 2 (CO) (2, iPr PN H P = HN(CH 2 CH 2 P i Pr 2 ) 2 ). However, rapid decomposition limits the catalytic performance of 1 and related complexes. We explored the pathways through which catalytic intermediates related to 1 and 2 undergo decomposition. This involved characterizing the unstable and previously unobserved complexes [( iPr PN H P)Fe(H)(CO)(L)] + (5-L; L = THF or N 2 ) and [( iPr PN H P)Fe(H)(H 2 )(CO)] + (8), which are proposed as intermediates when 1 and 2 are used as catalysts. Compound 8 was synthesized through the reaction of ( iPr PN H P)Fe(H)(CO)(PF 6 ) (6) with H 2 , and the solid-state structure was established using both X-ray and neutron diffraction. As part of our studies on understanding the reactivity of 5-L, we determined the thermodynamic hydricity of 2, which is valuable for predicting its reactivity as a hydride donor. Further, it is shown that species such as 5-L decompose to the same inactive species observed in catalysis using 1 and 2, and theoretical calculations suggest that this likely occurs via a bimolecular pathway. To provide support for this hypothesis, we isolated the dimeric species [{( iPr PN H P)Fe(H)(CO)} 2 {μ-CN}] + (11) and [{( iPr PN H P)Fe(H)(CO)} 2 {μ-OC(H)O}] + (12), which show that catalytic intermediates ligated by iPr PN H P can form dimeric species. Our results provide general strategies for improving catalysis using 1 and 2, and we used this information to rationally increase the performance of 1 in formic acid dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Hyperconjugation Promotes Catalysis in a Pyridoxal 5'-Phosphate-Dependent Enzyme

Pyridoxal 5'-phosphate (PLP)-dependent enzymes facilitate reaction specificity by aligning the scissile σ-bond of the PLP-substrate covalent complex perpendicular to the ring of the cofactor. Current models propose that this alignment causes a destabilization of the ground state. To test this hypothesis, quantum chemical calculations, utilizing our recent neutron diffraction models of aspartate aminotransferase, were performed. The calculations reveal that the scissile σ-bond orbital overlaps significantly with the π* orbital of the Schiff base. Here, this σ → π* hyperconjugation interaction stabilizes the ground state of the external aldimine and substantially contributes to transition-state stabilization by withdrawing electron density from the Cα-H σ bond into the π system of PLP, enhancing the rate of catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Li 3– x Zr x (Ho/Lu) 1– x Cl 6 Solid Electrolytes Enable Ultrahigh-Loading Solid-State Batteries with a Prelithiated Si Anode

We report two new families of lithium metal chloride solid electrolytes Li 3–x Zr x (M) 1–x Cl 6 (0 ≤ x ≤ 0.8; M = Ho or Lu) with ionic conductivities of up to 1.8 mS cm –1 and a low activation energy of 0.34 eV. Structural elucidation via high-resolution neutron diffraction determines the Li ion distribution in trigonal Li 3 HoCl 6 , orthorhombic-I Li 3 LuCl 6 , and orthorhombic-II Li 2.4 Zr 0.6 (Ho/Lu) 0.4 Cl 6 . The last compound exhibits well-connected Li-ion pathways and abundant Li-ion carriers/vacancies to promote diffusion. All-solid-state batteries with Li 2.6 Zr 0.4 (Ho/Lu) 0.6 Cl 6 solid electrolytes and NCM85 cathodes exhibit stable cycling up to 4.6 V vs Li + /Li, which is even preserved up to 4.8 V. Stable cathode interphases are formed for both electrolytes upon cycling to 4.3, 4.6, and 4.8 V cutoff potentials, as identified by a ToF-SIMS analysis. Solid-state cells with a prelithiated Li 0.7 Si anode exhibit a significantly increased initial coulombic efficiency of 94.5% compared to Si and a high areal capacity of up to 16.3 mAh·cm –2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Probing multiscale transport and inhomogeneity in a lithium-ion cells using in-situ neutron methods

Here, we demonstrate for the first time the lithiation process in graphitic anodes using insitu neutron radiography in a pouch cell format. The neutron absorption contrast shows a direct correlation between degree of lithiation and the discharge voltage plateau. Furthermore, we provide a semi-quantitative comparison between the observed spatial variations of neutron attenuation line profile across the graphite electrode and the calculated lithium concentration profiles computed under similar electrochemical discharge conditions. In conjunction, in situ neutron diffraction of a similar pouch cell under identical test protocol was carried to obtain information about the local phase changes upon lithiation. Combined in-situ radiography and diffraction opens up a powerful nondestructive method to understand the multi-scale nature of lithium transport and degradation in practical lithium-ion cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Comparative Analysis of Reactivity of Al and Ga Doped Garnet Solid State Electrolyte at the Interface with Li Metal

Lithium garnet (Li 7 La 3 Zr 2 O 12 , LLZO) based solid electrolytes are leading candidate materials for all-solid-state batteries with lithium metal anodes because of their high ionic conductivity, high mechanical toughness, and superior electrochemical stability. While doping LLZO with Al and Ga increases its ionic conductivity by stabilizing the cubic phase, the impact of dopants on its (electro)chemical stability at the interfaces with Li metal is critical. Here, our study of differences between Al- and Ga-doped LLZO when interfaced with lithium metal using X-ray photoelectron spectroscopy and density functional theory shows a higher propensity of Ga to move across LLZO interface with Li metal and form Ga-Li alloy. Additionally, neutron diffraction reveals loss of cubic phase resulting from the loss of dopant that explains electrochemical behavior differences between Ga- and Al-doped LLZO. Overall, our study reveals the key role of dopant chemistry in enabling stable solid electrolyte materials for all-solid-state batteries.

Klenk, Matthew↗
DOE OSTI2019

Elucidating the Limit of Li Insertion into the Spinel Li 4 Ti 5 O 12

Here in this work, we show that the well-known lithium-ion anode material, Li 4 Ti 5 O 12 , exhibits exceptionally high initial capacity of 310 mAh g –1 when it is discharged to 0.01 V. It maintains a reversible capacity of 230 mAh g –1 , far exceeding the “theoretical” capacity of 175 mAh g –1 when this anode is lithiated to the composition Li 7 Ti 5 O 12 . Neutron diffraction analyses identify that additional Li reversibly enters into the Li 7 Ti 5 O 12 to form Li 8 Ti 5 O 12 . density functional theory (DFT) calculations reveal the average potentials of the Li 4 Ti 5 O 12 to Li 7 Ti 5 O 12 step and the Li 7 Ti 5 O 12 to Li 8 Ti 5 O 12 step are 1.57 and 0.19 V, respectively, which are in excellent agreement with experimental results. Transmission electron microscopy (TEM) studies confirm that the irreversible capacity of Li 4 Ti 5 O 12 during its first cycle originates from the formation of a solid electrolyte interface (SEI) layer. This work clarifies the fundamental lithiation mechanism of the Li 4 Ti 5 O 12 , when lithiated to 0.01 V vs L

25 ENERGY STORAGE↗
DOE OSTI2019

An Ordered P2/P3 Composite Layered Oxide Cathode with Long Cycle Life in Sodium-Ion Batteries

Developing stable cathode materials represents a crucial step toward long-life sodium-ion batteries. P2-type layered oxides are important as cathodes for their reversibility, but their long-term performance in full cells remains a key challenge. Herein, we report Na 0.75 Co 0.125 Cu 0.125 Fe 0.125 Ni 0.125 Mn 0.5 O 2 with an intergrowth of ordered P2 and P3 phases, studied by neutron diffraction and Rietveld refinement. A stable electrochemical performance is achieved in Na half cells with 100% capacity retention at a rate of C/10 after 100 cycles (initial capacity of 90 mAh/g), 96% capacity retention at a rate of 1 C after 500 cycles (initial capacity of 70 mAh/g), and 85% capacity retention at a rate of 5 C after 1000 cycles (initial capacity of 55 mAh/g). Stable full cell performance is achieved with 84.2% capacity retention after 1000 cycles at a rate of 1 C. Synchrotron X-ray diffraction, spectroscopy, and imaging are applied to elucidate the relationship between chemical/structural evolution and battery performance. A reversible local and global structural evolution is observed during initial cycles. Meanwhile, the challenges with enabling prolonged cycling (beyond 1000 cycles) may be associated with Fe dissolution and formation of a copper oxide phase. This study implies that cathodes with complex chemical and structural formations may stabilize electrochemical performance and highlights the importance of decoupling the contribution of each transition metal to performance degradation.

25 ENERGY STORAGE↗
DOE OSTI2019

Integrating Density Functional Theory Calculations with Vibrational and Nuclear Magnetic Resonance Spectroscopy

This review focuses on the complementary nature of density functional theory calculations and spectroscopic studies related to cellulose and its interactions within plant cell walls (PCWs). The complexity, structural disorder, and nanoscale nature of PCWs make them difficult to analyze and understand, but advances in sum-frequency generation and nuclear magnetic resonance spectroscopies as well as in density functional theory have made it possible to elucidate structure not observable previously. Combined with other techniques such as wide-angle X-ray scattering and neutron diffraction, details of PCW components (e.g., cellulose, lignin, pectin) and their interactions with one another can be elucidated. Furthermore, these techniques provide new insight into biological and biochemical studies and provide a basis for creating improved models of the PCWs.

36 MATERIALS SCIENCE↗