Results for “moderator” — Page 75

NASA NTRSDate not supplied

Boundary-Layer Cloud Modeling Challenges on the North Slope of Alaska

The accurate modeling and prediction of cloud base heights is critical for energy balance calculations and aviation operations, alike. Low-level (i.e., boundary-layer) Arctic clouds can be difficult to model, making prediction of formation and dissipation challenging. Primarily mixed-phase, these clouds typically contain low quantities of supercooled liquid water and often slowly precipitate relatively small amounts of moderately and heavily rimed snow particles. While this appears to be the predominant cloudy state on the North Slope of Alaska (NSA), the delicate balance of microphysical, dynamical, radiative, surface coupling, and advective processes can rapidly shift to heavy snow (with various degrees of riming) or to a complete dissipation of the cloud layer without any precipitation, depending on the dominant processes. Here we strive to disentangle these various processes. First, we compare the predictive performances of four different numerical weather models in forecasting the presence and base-heights of low-level clouds: the High-Resolution Rapid Refresh - Alaska (HRRR-AK) model, the Polar Weather Research and Forecasting (Polar WRF) model, the Unified Model (UM), and the European Centre for Medium-range Weather Forecasting (ECMWF) model. Initial results comparing model output at two U.S. Department of Energy Atmospheric Radiation Measurement (AMT) NSA sites, during the fall season in 2019 and 2022, show that the UM slightly outperforms the HRRR-AK in terms of accurately forecasting the presence of a low-level cloud layer (89% of the time). All models have a significant bias of 300 to 800 meters in forecasting cloud base height (lower than is observed); however, the UM and ECMWF models have the lowest biases. Finally, a case study for a particularly challenging April 2017 thin-cloud event is presented, wherein we compare the performance of four different bulk microphysical parameterization schemes using a higher-resolution large eddy simulation (LES) model, the WRF-LES. Initial results show that the Thompson scheme was the only one able to reproduce and sustain a substantial supercooled liquid layer, but it was unable to reproduce the transition from a deep, liquid-rich cloud to a thin layer with moderately and heavily rimed precipitation. This is the first step in linking simulated LES-scale riming processes with those parameterized at a coarser mesoscale model scale. This has important implications for forecasting low-level clouds in an operational environment, given the efficiency of the riming process.

cloud base heights↗

NASA NTRS2023

Is the M81 fast radio burst host globular cluster special?

We use multiband archival Hubble Space Telescope (HST) observations to measure the photometric and structural parameters of the M81 globular cluster (GC) that hosts the fast radio burst FRB 20200120E. Our best-fitting King model has an effective radius rh = 3.06 pc with a moderate King model concentration of c = 53, and an inferred core radius of 0.81 pc. We revisit the exact astrometric location of the FRB within the cluster, and find that FRB 20200120E is located 1.92 pc from the center, but within the projected half-light radius. We estimate the relative encounter rate of the FRB host, along with the corresponding rates of 210 other GCs in M81, and compare these values with the encounter rates of Galactic GCs. The FRB resides in a GC with an encounter rate that is moderately higher than the median stellar encounter rate in our two comparison samples. While the estimated encounter rate of the FRB host cluster (e.g., ∼50% of a cluster like 47 Tuc) is sufficient to allow the possibility that the FRB formed dynamically, our results do not place strong constraints on this scenario due to the limitations of the available HST data and the possible systematic uncertainties and selection effects in the comparison data.

Kristen C. Dage↗

NASA NTRSDate not supplied

Cloud-Type Mean Cloud Properties and Associated Cloud Radiative Effects in the Tropical “Chimney” Zones Using 20 Years High-Resolution CERES Satellite Data

It has been well known that convection tends to be more intense over land than over ocean and continental convection generally contains wider cores that are protected from entrainment than their oceanic counterparts. How does this difference in convective intensity impact the rest of cloud types and associated cloud radiative effects (CREs)? We select five regions in the tropical “chimney” zones, with two regions over land (Africa and Amazon) and three regions over ocean (eastern and western Pacific, and Atlantic) to understand the differences in the cloud-type mean cloud properties and associated CREs using 20-years high-resolution (2x2 km2) CERES satellite data. The cloud types are based upon the ISCCP classification using the joint cloud-top pressure and cloud optical depth distribution. These five regions are compared to the entire tropics (25°S to 25°N). First, we compare the frequencies of occurrence of cloud types among the regions. Compared to the entire tropics, the “chimney” zones are cloudier, particularly, for cloud types with moderate cloud optical depths in the middle and upper troposphere. Except for the eastern Pacific region, the low-level cloud types are less abundant over land (due to higher boundary layers) and ocean (due to weaker lower-tropospheric subsidence). Over Africa, upper-level clouds are scarcer, due perhaps to weak production of convective anvils related to the drier atmosphere. Second, liquid water path (LWP) and ice water path (IWP) are compared among the regions. Compared to the entire tropics, mean LWPs for moderate cloud optical depths are higher for oceanic regions but lower for Africa while they are slightly lower in the lower troposphere but slightly higher in the middle troposphere for Amazon. Not surprisingly, mean IWPs are higher over land than over ocean, which is directly related to the difference in convective intensity. That is, the explanations to this result are the relatively weak convective intensity over the eastern Pacific and the abundance of anvil clouds over the western Pacific. Both reduce the mean IWPs. The CRE results are still being analyzed because the totally-clear grids (1° x 1°) of the CERES data product should be removed before taking a regional mean of clear-sky fluxes, which cause the wrong signs of CREs for a few cloud types.

cloud radiative effects↗

NASA NTRS2023

Modeling Global Indices for Estimating Non-Photosynthetic Vegetation Cover

Non-photosynthetic vegetation (NPV) includes plant litter, senesced leaves, and crop residues. NPV plays an essential role in terrestrial ecosystem processes, and is an important indicator of drought severity, ecosystem disturbance, agricultural resilience, and wildfire danger. Current moderate spatial resolution multispectral satellite systems (e.g., Landsat and Sentinel-2) have only a single band in the 2000–2500 nm shortwave infrared “SWIR2” range where non-pigment biochemical constituents of NPV, including cellulose and lignin, have important spectral absorption features. Thus, these current systems have suboptimal capabilities for characterizing NPV cover. This research used simulated spectral mixtures accounting for variability among NPV and soils to evaluate globally-appropriate hyperspectral and multispectral indices for estimation of fractional NPV cover. The Continuum Interpolated NPV Depth Index (CINDI), a weighted ratio index measuring lignocellulose absorption near 2100 nm, was found to produce the lowest error in estimating NPV cover. CINDI was less sensitive to variability in soil spectra and green vegetation cover than competing indices. While CINDI was sensitive to the relative water content of soil and NPV, this sensitivity allowed for correcting error in estimated NPV cover as water content increased. CINDI bands were less capable than Dual Absorption NPV Index (DANI) bands for maintaining continuity with the heritage Landsat SWIR2 band, but combining multiple CINDI bands demonstrated adequate continuity. Three SWIR2 bands with band centers at 2038, 2108, and 2211 nm can provide superior capabilities for future moderate resolution multispectral/superspectral systems targeting NPV monitoring, including the next generation Landsat mission (Landsat Next). These bands and the associated CINDI index provide potential for global NPV monitoring using a constellation of future superspectral sensors and imaging spectrometers, with applications including improving soil management, preventing land degradation, evaluating impacts of drought, mapping ecosystem disturbance, and assessing wildfire danger.

Index optimization↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

behavioral health↗

NASA NTRSDate not supplied

Comparative Performance of Entry Simulations using Guided Human-Scale Landers at Mars

There has been ongoing interest in human exploration of Mars since the 1970s. Most studies to date have investigated moderate lift-to-drag ratio vehicles to investigate this problem. This paper considers the development and cross-simulation comparison of a slender-bodied, moderate lift-to-drag human-scale lander vehicle for Mars. The vehicle employs the Fully Numerical Predictor-corrector Entry Guidance to target a powered descent state, subsequently leveraging Fractional Polynomial Powered Descent Guidance laws to reach the desired touchdown target. Differences in simulation environment as well as nominal trajectory results are shared.

Evan Roelke↗

NASA NTRS2024

A Multi‐Probe Automated Classification of Ice Crystal Habits During the IMPACTS Campaign

Although all ice crystals are unique, many can be grouped together by shape or habit, with members of a habit class sharing similar representations of properties such as fall velocity and growth rate. A decision tree algorithm designed to be adaptable to any particle imaging probe, thus enabling the creation of habit size distributions over a size range larger than that of any probe on its own, is used to classify ice crystals imaged by three airborne cloud probes in mid-latitude winter cyclones during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) field campaign. Crystals are sorted into seven habit classes based on their morphological properties: sphere, column/needle, plate, graupel, dendrite, aggregate, and irregular. Although adaptability was its primary goal, the algorithm was found to be moderately skillful for identifying idealized habit images. Quantitative tests of the algorithm’s adaptability displayed mixed results, as Two-Dimensional Stereo Probe (2DS) classifications showed moderate correlation with Particle Habit Imaging and Polar Scattering Probe (PHIPS) classifications, but only weak correlation with High Volume Precipitation Spectrometer (HVPS) classifications. The algorithm was applied to random sets of images from each probe in a case study of a mesoscale snow band sampled on 7 February 2020. In the case study, qualitative analysis of particle images revealed general agreement on classifications among the probes, supporting the algorithm’s applicability to multiple cloud probes. Most classifications appeared correct upon manual inspection, suggesting that in practical use, the algorithm is reasonably able to classify non-idealized images.

Julian Schima↗

NASA NTRSDate not supplied

Comparative Performance of Entry Simulations using Guided Human-Scale Landers at Mars

There has been ongoing interest in human exploration of Mars since the 1970s. Most studies to date have investigated moderate lift-to-drag ratio vehicles to investigate this problem. This paper considers the development and cross-simulation comparison of a slender-bodied, moderate lift-to-drag human-scale lander vehicle for Mars. The vehicle employs the Fully Numerical Predictor-corrector Entry Guidance to target a powered descent state, subsequently leveraging Fractional Polynomial Powered Descent Guidance laws to reach the desired touchdown target. Differences in simulation environment as well as nominal trajectory results are shared.

Evan Roelke↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

countermeasure↗

DOE OSTI2020

Codisposal Waste Package Loading Options for DOE SNF and HLW PPT

The U.S. Department of Energy (DOE) is responsible for managing spent nuclear fuel (SNF) that is currently in, or will in the future come into, its possession. DOE must continue to safely store that SNF, transport it to an interim storage site or a repository, and dispose of it. These fuels come from a wide range of reactor types with various cladding materials and enrichments. Many of these reactors, now decommissioned, had unique design features, such as core configuration, fuel element and assembly geometry, moderator and coolant materials, operational characteristics, and neutron spatial and spectral properties, resulting in a large diversity of reactor and fuel designs. Because of the wide variety and conditions of SNF, a robust DOE Standard Canister was proposed that would confine radionuclides and preclude moderator. The DOE Standard Canister had four variations: 3.05-meter (10-foot) or 4.57-meter (15-foot) length, and 45.7-cm (18-inch) or 61.0-cm (24-inch) diameter. For ultimate disposal in the Yucca Mountain Repository, these canisters were to be grouped with 61.0-cm (24-inch) diameter high level waste (HLW) canisters in a 2.13-meter (84-inch) diameter co-disposal waste package. The smaller 45.7-cm (18-inch) diameter DOE Standard Canister could be placed in the middle of five HLW canisters. The larger 61.0-cm (24-inch) diameter DOE Standard Canister would take the place of one of the five HLW canisters on the outer ring in the co-disposal waste package. No DOE Standard Canisters have been loaded. A preliminary evaluation has estimated the number of elements of a fuel type that can fit into the different sizes of the DOE Standard Canister, but no definitive loading configuration has been selected. Changing the loading configuration could impact the number of loadable DOE Standard Canisters and the number of co-disposal waste packages needed for eventual disposition. This paper conveys the ranges of DOE Standard Canisters and HLW canisters that may be produced under certain conditions. It also examines the differences in the estimated number of co-disposal waste packages produced for eventual disposal when using different loading strategies in the DOE Standard Canister for Advanced Test Reactor (ATR), Peach Bottom, and High Flux Isotope Reactor (HFIR) SNF. Changing the loading configurations of ATR, Peach Bottom, and HFIR SNF slightly impacted the number of co-disposal waste packages that may be needed for ultimate disposal. The change in loading configuration was more impactful when a different canister was used, as opposed to varying the number of elements that could fit inside the same size canister. In one case, a reduction of co-disposal waste packages could be achieved by allowing mixing of short HLW canisters with long DOE Standard Canisters. The main conclusion from this analysis is that the ratio between HLW canisters and DOE Standard Canisters will drive the total number of co-disposal waste packages. If too many HLW canisters (i.e., more than five times the number of 18-inch DOE standard canisters) or DOE Standard Canisters are produced, some co-disposal waste packages may not have all positions filled. A co-disposal waste package may be filled with all HLW with no DOE Standard Canister, or a co-disposal waste package could be filled with a single DOE Standard Canister. A ratio that does not closely align to optimum could allow for the design of waste packages that hold just HLW canisters or just DOE SNF canisters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Numerical Model Development of a Variable-Geometry Attenuator Wave Energy Converter: Preprint

Because the wave energy industry is still in its infancy, an optimal design for wave energy converters (WECs) has yet to be established; more work is needed to explore various cost reduction pathways. The primary cost-reduction pathway considered for this work is the optimization of the geometric profile on an attenuator WEC to maximize power production while, at the same time, minimizing capital expenditures through the use of variable-geometry modules. In this investigation, the variable geometry modules consist of inflatable bags placed on either side of a base central steel cylinder that would be inflated in low moderate sea states to maximize power capture and then deflated in moderate-extreme sea states to minimize wave loading. The numerical model and simulation of the attenuator WEC were developed and completed using WEC-Sim, which is an open-source code that is appropriate for use in evaluating the dynamic response of the different WEC models in operational seas. The power production estimates were obtained from the Wave Energy Prize (WEP) sea states, which are representative of U. S. deployment sites, to calculate the average climate capture width that is used in the WEP ACE calculation. Preliminary capital expenditure costs were obtained assuming the base central steel cylinder mass was equal to the fluid displaced mass, minus the mass of the variable-geometry bags. The additional weight required to offset the additional buoyancy from the variable-geometry bags was assumed to come from the addition of seawater ballast. The variable-geometry attenuator model was found to have a similar power capture efficiency as a fixed-body model, but is expected to have a lower characteristic capital expenditure given its more streamlined profile, which demonstrates that variable-geometry modules may provide a realistic cost-reduction pathway to help design a more cost-competitive WEC.

50 EE - Wind and Water Power Program - Water (EE-4↗

DOE OSTI2020

Technical Program Plan for INL Advanced Reactor Technologies Advanced Gas Reactor Fuel Development and Qualification Program

High-temperature gas cooled reactors (HTGRs) are graphite moderated nuclear reactors cooled with helium. Their high outlet temperatures and thermal energy conversion efficiency enable efficient and cost effective integration with non electricity generating applications. These applications include process heat and hydrogen production for petrochemical and other industrial processes that require operating temperatures between 300 and 900°C. HTGRs will supplement the use of premium fossil fuels such as oil and natural gas, improve overall energy security in the United States by reducing dependence on foreign fuels, and reduce carbon dioxide (CO2)/greenhouse gas emissions. The HTGR design uses helium as a coolant, graphite as a neutron moderator, and ceramic particle fuel. Helium is chemically inert and neutronically transparent. The graphite core slows down the neutrons, retains its strength at high temperatures, provides structural stability, and acts as a substantial heat sink during transient conditions. The ceramic particle fuel is extremely robust and retains the radioactive by products of the fission reaction within the coated particle under normal and off normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Expanding the Field of Climate Finance

Over the past twenty-one years, the Financial Innovations Roundtable (FIR), located at the Carsey School of Public Policy at the University of New Hampshire, has worked to address problems related to access to capital for low- and moderate-income consumers and communities. Since 2014, the event has been co-hosted by the Federal Reserve Board. The FIR works with a range of financial institutions, government agencies, foundations, and trade associations to access their expertise for problem-solving discussions. The 2020 FIR focused on the expanding field of climate finance and was co-hosted by the Federal Reserve Bank of San Francisco and The Climate Safe Lending Network. The event was originally slated to be in-person in San Francisco in May 2020 but was postponed due to the pandemic and shifted to an online event hosted November 16‒17, 2020. A significant amount has happened in 2020 on climate finance, racial justice, the economy, and COVID-19. The shocks and stresses of climate change are creating risks in low- and moderate-income communities as well as in the financial sector broadly. The 2020 FIR offered an opportunity to discuss the challenges and opportunities banks and Community Development Financial Institutions (CDFIs) face as they address these risks and how these institutions can help increase individual, institutional, and community-wide resilience. The program explored new and modified products that address climate risk in communities and how those products can be scaled. Conversations focused around: • The progress that has been made in the climate finance field and the challenges that lie ahead for financial institutions’ climate impact and climate-related risk. • Promising opportunities to decarbonize investments and finance low-carbon technology and infrastructure. • How lenders, insurers, housing organizations, and the public sector can work together to reduce housing instability due to climate-related factors and increase the climate-resilience of homes and neighborhoods. • Solutions to help communities address a wide range of related issues, including home weatherization and disaster preparation, home insurance loss, and climate gentrification and displacement. • Discussing lessons learned from other sectors such as renewable energy in order to design both people-based and place-based finance solutions that promote racial and economic inclusion. 1 • The need for all financial institutions to acknowledge that climate risks and racial inequity are systemic risks affecting their bottom line. • The role that bank regulators can play in promoting collaboration across the financial sector and in leading by example with regard to climate finance. • Mapping out concrete action-item initiatives including policy and industry pathways to climate safe lending as well as building a financing platform to provide clean energy to low-income communities. • More broadly, in order to systemically address climate risks, we will need to work together as a range of stakeholders across sectors and collaborate on shared goals and projects.

14 SOLAR ENERGY↗

DOE OSTI2020

Gas Hydrate Saturation Estimation Form Acoustic Log Data in the 2018 Alaska North Slope Hydrate-01 Stratigraphic Test

Completed in December 2018, the Alaska North Slope Hydrate 01 stratigraphic test well provides a wealth of logging-while-drilling (LWD) data for strata to below the base of gas hydrate stability (BGHS). This well is intended to be the first of three wells drilled for a comprehensive long-term gas hydrate production test conducted by the National Energy Technology Laboratory, the Japan Oil, Gas and Metals National Corporation, and the U.S. Geological Survey (USGS). The Hydrate 01 stratigraphic test well confirmed the presence of gas hydrate in two sand reservoirs within the hydrate stability zone, indicating the suitability of this location for a long-term gas hydrate production test.<p>The USGS, using an effective-medium-theory rock-physics approach, has estimated gas hydrate saturations from compressional (P) and shear (S) wave log data acquired in the Hydrate 01 well. We assume that gas hydrate occurs as pore-filling load-bearing material (i.e., part of the grain matrix). For Unit D, approximately 500 feet above the BGHS, both P-wave and S-wave acoustic logs indicate moderate gas hydrate saturations with S-wave results slightly lower than those for P-waves. For the Unit B, located just above the BGHS, we obtain moderate to high gas hydrate saturation estimates from both sonic logs. Our P-wave saturation estimates agree well with results from electrical-resistivity-based estimates, whereas estimates from nuclear magnetic resonance LWD data generally suggest 5 to 10 percent higher saturations; our S-wave results suggest lower saturations. These differences likely indicate complexities in the form of gas hydrate occurrence within the sediment pore space, potentially including differences between hydrate occurrence in Units D and B.</p>

Haines, Seth↗

DOE OSTI2021

Technical Program Plan for INL Advanced Reactor Technologies Advanced Gas Reactor Fuel Development and Qualification Program

High-temperature gas cooled reactors (HTGRs) are graphite moderated nuclear reactors cooled with helium. Their high outlet temperatures and thermal energy conversion efficiency enable efficient and cost effective integration with non electricity generating applications. These applications include process heat and hydrogen production for petrochemical and other industrial processes that require operating temperatures between 300 and 900°C. HTGRs will supplement the use of premium fossil fuels such as oil and natural gas, improve overall energy security in the United States by reducing dependence on foreign fuels, and reduce carbon dioxide (CO2)/greenhouse gas emissions. The HTGR design uses helium as a coolant, graphite as a neutron moderator, and ceramic particle fuel. Helium is chemically inert and neutronically transparent. The graphite core slows down the neutrons, retains its strength at high temperatures, provides structural stability, and acts as a substantial heat sink during transient conditions. The ceramic particle fuel is extremely robust and retains the radioactive by products of the fission reaction within the coated particle under normal and off normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Rapid fill compressed gas storage tank

A method for rapidly filling a compressed gas storage tank with a moderated temperature rise using a Coanda nozzle to inject the feed gas into the tank and using the Coanda nozzle to direct the feed gas along the inner surface of the storage tank; entraining the stored gas with the feed gas that is flowing under the influence of the Coanda effect to flow along the inner surface of the gas storage tank; and transferring heat from the flowing gas to the external walls of the tank. Also, a compressed gas storage tank for rapid filling with a moderated temperature rise comprising: a gas storage tank and a Coanda nozzle capable of directing feed gas that is injected into the gas storage tank along the inner surface of the gas storage tank.

Jayaraman, Ambalavanan↗

DOE OSTI2021

Space Nuclear Thermal Propulsion Critical Assembly Boron Worth Experiments

The Space Nuclear Thermal Propulsion (SNTP) project was an attempt to create a more powerful and more efficient rocket engine utilizing nuclear technologies. As part of this project a zero-power critical assembly referred to as SNTPCX was designed and installed at Sandia National Laboratories. The SNTP-CX was a light water moderated particle bed reactor utilizing highly enriched uranium fuel in the form of UC particles. The SNTP-CX performed 142 runs covering numerous experiments from the year 1989 to 1992. The program was canceled in 1994 as the nation’s priorities shifted. Now these experiments are being evaluated for use as criticality safety benchmarks. Nineteen of the 142 reactor runs were dedicated to a series of experiments to calculate the worth of the boron used in the light water moderator. This series of experiments has been selected for further evaluation as a critical benchmark for the International Criticality Safety Benchmark Evaluation Project (ICSBEP).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

A Subcritical Assembly for Training and Education Use at the Oak Ridge National Laboratory

A near-final design has been completed for a new subcritical assembly at Oak Ridge National Laboratory (ORNL). This subcritical assembly will support the Nuclear Criticality Safety Program (NCSP) training and education program to augment current subcritical assembly capabilities at Sandia National Laboratories (SNL) and at the National Criticality Experiments Research Center (NCERC). Other collaborations have been proposed with the Sunrise Consortium and others. This proposed subcritical assembly uses legacy AGN-201M research reactor fuel plates that are available from the Y-12 National Security Complex. This subcritical assembly contains approximately 620 grams of 235 U as UO 2 particulates distributed homogeneously in radiation-stabilized polyethylene. The fuel plates will have a graphite neutron reflector to obtain a core multiplication, M, from 10 to 50, corresponding to a k eff of 0.9 to 0.95, respectively. The subcritical assembly will be able to support at least four experiments for the training courses: (1) the addition of fissile material to increase neutron multiplication (mass), (2) a core separation experiment (interaction), (3) the effect of adding moderators to the core (moderation), and (4) the effect of adding neutron absorbers to the core (poison/absorption). The proposed ORNL subcritical assembly will provide additional student bandwidth to support NCSP training courses and to provide for some backup capacity if nuclear facility operations are disrupted at SNL or NCERC due to some unforeseen issue. The subcritical assembly will be designed to be an inherently safe subcritical assembly—subcritical under all normal and abnormal conditions—and it will provide the capability to conduct hands-on training to support NCSP and general nuclear criticality safety (NCS) staff training and qualification goals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗