Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “melt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Outgassed water on Mars - Constraints from melt inclusions in SNC meteorites

The SNC (shergottite-nakhlite-chassignite) meteorites, thought to be igneous rocks from Mars, contain melt inclusions trapped at depth in early-formed crystals. Determination of the pre-eruptive water contents of SNC parental magmas from calculations of the solidification histories of these amphibole-bearing inclusions indicates that Martian magmas commonly contained 1.4 percent water by weight. When combined with an estimate of the volume of igneous materials on Mars, this information suggests that the total amount of water outgassed since 3.9 billion years ago corresponds to global depths on the order of 200 meters. This value is significantly higher than previous geochemical estimates but lower than estimates based on erosion by floods. These results imply a wetter Mars interior than has been previously thought and support suggestions of significant outgassing before formation of a stable crust or heterogeneous accretion of a veneer of cometary matter.

Mcsween, Harry Y., Jr.↗
NASA NTRS1993

The solubility of gold in silicate melts: First results

The effects of oxygen fugacity and temperature on the solubility of Au in silicate melts were determined. Pd-Au alloys were equilibrated with silicate of anorthite-diopside eutectic composition at different T-fO2 conditions. The behavior of Au was found to be similar to that of Pd reported recently. Au solubilities for alloys with 30 to 40 at. percent Au decrease at 1400 C from 12 ppm in air to 160 ppb at a log fO2 = -8.7. The slope of the log(Me-solubility) vs. log(fO2) curve is close to 1/4 for Au and the simultaneously determined Pd suggesting a formal valence of Au and Pd of 1+. Near the IW buffer Pd and Au solubilities become even less dependent on fO2 perhaps reflecting the presence of some metallic Au and Pd.

Borisov, A.↗
NASA NTRS1993

Trace-element composition of Chicxulub crater melt rock, K/T tektites and Yucatan basement

The Cretaceous/Tertiary (K/T) boundary Chicxulub impact is the best preserved large impact in the geologic record. The Chicxulub crater has been buried with no apparent erosion of its intracrater deposits, and its ejecta blanket is known and is well preserved at hundreds of localities globally. Although most of the molten material ejected from the crater has been largely altered, a few localities still preserve tektite glass. Availability of intra- and extracrater impact products as well as plausible matches to the targeted rocks allows the comparison of compositions of the different classes of impact products to those of the impacted lithologies. Determination of trace-element compositions of the K/T tektites, Chicxulub melt rock, and the targeted Yucatan silicate basement and carbonate/evaporite lithologies have been made using instrumental neutron activation analysis (INAA) and inductively coupled plasma mass spectrometry (ICP-MS). Some sample splits were studied with both techniques to ensure that inter-laboratory variation was not significant or could be corrected. The concentration of a few major and minor elements was also checked against microprobe results. Radiochemical neutron activation analysis (RNAA) was used to determine Ir abundances in some samples.

Hildebrand, A. R.↗
NASA NTRS1993

Transition metals in superheat melts

A series of experiments with silicate melts doped with transition element oxides was carried out at atmospheric pressures of inert gas at temperatures exceeding liquidus. As predicted from the shape of fO2 buffer curves in T-fO2 diagrams the reducing conditions for a particular oxide-metal pair can be achieved through the T increase if the released oxygen is continuously removed. Experimental studies suggest that transition metals such as Cr or V behave as siderophile elements at temperatures exceeding liquidus temperatures if the system is not buffered by the presence of other oxide of more siderophile element. For example the presence of FeO prevents the reduction of Cr2O3. The sequence of decreasing siderophility of transition elements at superheat conditions (Mo, Ni, Fe, Cr) matches the decreasing degree of depletion of siderophile elements in mantle rocks as compared to chondrites.

Jakes, Petr↗
NASA NTRS1993

Convection effects on radial segregation and crystal melt interface in vertical Bridgman growth

We analytically study the influence of convection caused by horizontal heat transfer through the sides of a vertical Bridgman apparatus. We consider the case when the heat transfer across the side walls is small so that the resulting interfacial deformation and fluid velocities are also small. This allows us to linearize the Navier-Stokes equations and express the interfacial conditions about a planar interface through a Taylor expansion. Using a no tangential stress conditions on the side walls, asymptotic expressions for both the interfacial slope, and radial segregation at the crystal-melt interface are obtained in closed form in the limit of large thermal Rayleigh number. It is suggested that these can be reduced by appropriately controlling a specific heat transfer property at the edge of the insulation zone in the solid side.

Tanveer, S.↗
NASA NTRS1993

Petrogenesis of Apollo 12 mare basalts. Part 1: Multiple melts and fractional crystallization to explain olivine and ilmenite basalt compositions

Mare basalts returned by the Apollo 12 mission have been divided into 4 groups on the basis of mineralogy and whole-rock chemistry: olivine basalts; pigeonite basalts; ilmenite basalts; and feldspathic basalts. James and Wright and Rhodes et al. concluded that the olivine and pigeonite groups were co-magmatic and that the within group variations are due to fractional crystallization of olivine and minor Cr-spinel, with pigeonite replacing olivine in the pigeonite basalts. Rhodes et al. concluded that the parental compositions for these suites were probably represented by the vitrophyres, and the olivine basalts are comprised essentially of cumulates and the pigeonites of evolved end-members. However, Neal et al. have demonstrated, using trace-element considerations, that the Apollo 12 olivine and pigeonite suites are not related. The ilmenite basalts were studied extensively by Dungan and Brown who noted that both cumulates and evolved fractionates were present within this group. In their modeling, Dungan and Brown used the vitrophyre compositions as parents. Neal et al. demonstrated that the feldspathic suite was probably comprised of only one member - 12038. Herein, the ilmenite and olivine basalts are demonstrated to be the products of several non-modal partial melting events of a single source followed by closed-system fractional crystallization.

Neal, Clive R.↗
NASA NTRS1993

Melt rock components in KREEPy breccia 15205: Petrography and mineral chemistry of KREEP basalts and quartz-normative mare basalts

Many current models for the origin of lunar highland rocks feature as an essential component the assimilation of KREEPy material by primitive magmas parental to the Mg-rich suite and alkali suite plutonic rocks. Similar models have also been proposed for the origin of various mare basalt suites. However, any model which considers assimilation of KREEP an important petrologic process must sooner-or-later deal with the question: what is KREEP? Because pristine KREEP basalts are rare, and most known samples are small (e.g., 15382/15386), the geochemical variability of KREEP basalts is poorly known. Other KREEP compositions which are commonly used in these models include the hypothetical 'high-K KREEP' component of Warren and Wasson, which is derived from Apollo 14 soil data, and the 'superKREEP' quartz-monzodiorite 15405. Lunar breccia 15205 is a polymict regolith breccia that consists of approximately 20% KREEP basalt clasts and 20% quartz-normative basalt clasts in a KREEP-rich matrix. Bulk rock mixing calculations show that this sample comprises about 84% KREEP. The clasts range up to 1 cm in size, but most are considerably smaller. The primary aim is to characterize pristine KREEP basalts petrographically, to establish the range in chemical compositions of KREEP basalts, and to test models that were proposed for their origin. In addition, we may be able to extend the compositional range recognized in the quartz-normative basalt suite and cast some light on its origin as well. Preliminary whole rock geochemical data on the KREEP basalts are presented in a companion paper by M.M. Lindstrom and co-workers. Concentration is on petrography and mineral chemistry of these clasts, and the implications these data have for the origin of the different melt rock suites.

Shervais, John W.↗
NASA NTRS1994

Interface Shape and Convection During Solidification and Melting of Succinonitrile

An experimental study was conducted of the crystal growth of succinonitrile during solidification, melting, and no-growth conditions using a horizontal Bridgman furnace and square glass ampoule. For use as input boundary conditions to numerical codes, thermal profiles on the outside of the ampoule at five locations around its periphery were measured along the ampoule's length. Temperatures inside the ampoule were also measured. The shapes of the s/l interface in various two dimensional planes were quantitatively determined. Though interfaces were nondendritic and noncellular, they were not flat, but were highly curved and symmetric in only one unique longitudinal y-z plane (at x=O). The shapes of the interface were dominated by the primary longitudinal flow cell characteristic of shallow cavity flow in horizontal Bridgman; this flow cell was driven by the imposed furnace temperature gradient and caused a 'radical' thermal gradient such that the upper half of the ampoule was hotter than the bottom half. We believe that due to the strong convection, the release of latent heat does not significantly influence the thermal conditions near the interface. We hope that the interface shape and thermal data presented in this paper can be used to optimize crystal growth processes and validate numerical models.

Degroh, Henry C., III↗
NASA NTRS1994

Partition coefficients for Al, Ca, Ti, Cr, and Ni in olivine obtained by melting experiment on an LL6 chondrite

We report the partition coefficients for Ca, Al, Ti, Cr, and Ni in olivine obtained through a series of melting experiments on an LL6 chondrite under varying conditions of temperature and oxygen fugacity. It is necessary to examine the variation of partition coefficients up to extremely reducing conditions in order to study meteoritic olivines. For Ca, Al, and Cr, the partition coefficients tend to decrease as temperature increases, but do not change even under extremely reducing conditions.

Miyamoto, M.↗
NASA NTRS1993

Thermal expansivity, bulk modulus, and melting curve of H2O-ice VII to 20 GPa

Equation of state properties of ice VII and fluid H2O at high pressures and temperatures have been studied experimentally from 6 to 20 GPa and 300-700 K. The techniques involve direct measurements of the unit-cell volume of the solid using synchrotron X-ray diffraction with an externally heated diamond-anvil cell. The pressure dependencies of the volume and bulk modulus of ice VII at room temperature are in good agreement with previous synchrotron X-ray studies. The thermal expansivity was determined as a function of pressure and the results fit to a newly proposed phenomenological relation and to a Mie-Gruneisen equation of state formalism. The onset of melting of ice VII was determined directly by X-ray diffraction at a series of pressures and found to be in accord with previous volumetric determinations. Thermodynamic calculations based on the new data are performed to evaluate the range of validity of previously proposed equations of state for fluid water derived from static and shock-wave compression experiments and from simulations.

Fei, Yingwei↗
NASA NTRS1994

Radar measurements of melt zones on the Greenland Ice Sheet

Surface-based microwave radar measurements were performed at a location on the western flank of the Greenland Ice Sheet. Here, firn metamorphasis is dominated by seasonal melt, which leads to marked contrasts in the vertical structure of winter and summer firn. This snow regime is also one of the brightest radar targets on Earth with an average backscatter coefficient of 0 dB at 5.3 GHz and an incidence angle of 25 deg. By combining detailed observations of firn physical properties with ranging radar measurements we find that the glaciological mechanism associated with this strong electromagnetic response is summer ice lens formation within the previous winter's snow pack. This observation has important implications for monitoring and understanding changes in ice sheet volume using spaceborne microwave sensors.

Jezek, Kenneth C.↗
NASA NTRS1994

Igneous inclusions from ordinary chondrites: High temperature cumulates and a shock melt

We report microprobe, instrumental neutron activation analysis, and radiochemical neutron activation analysis data for three large igneous inclusions in the Yamato (Y-)75097, Y-793241, and Y-794046 ordinary chondrites. The inclusions in the first two chondrites are troctolitic cumulates that have undergone appreciable reactions with their hosts either during emplacement and/or cooling. Olivine-spinel Fe-Mg exchange pairs in these two inclusions record equilibration temperatures of about 710 C, and these temperatures are similar to those exhibited by mineral pairs in the Y-75097 and Y-793241 hosts. The inclusion in Y-794046 is texturally unique, consisting of fine-grained, randomly distributed olivines, coarse (approximately 2 mm) fascicular pyroxene laths, and angular pockets of maskelynite/plagioclase feldspar. The phase compositions are readily interpreted as having resulted from extremely rapid, essentially isochemical cooling to temperatures less than 1000 C of a melt with an initial temperature greater than 1670 C. We suggest that this igneous inclusion formed in-situ by shock.

Sack, Richard O.↗
NASA NTRS1995

Partical Melting of bulk Bi-2212

Dense and textured Bi-2212 bulk samples have been produced by the partial melting process. The appropriate amount of liquid phase necessary for complete densification has been adjusted by controlling the maximum processing temperature. The maximum temperature itself has to be adapted to several parameters as powder stoichiometry, silver addition and oxygen partial pressure. Prolonged annealing at 850 and 820 C and cooling in N2 atmosphere led to nearly single phase material with T(sub c) = 92 K. Critical current densities j(sub c) of 2'200 A/sq cm at 77 K/0 T have been achieved in samples of more than 1 mm thickness. Reducing the thickness below 0.4 mm enhances j(sub c) considerably to values is greater than 4'000 A/sq cm. The addition of 2 wt% Ag decreases the solidus temperature of the Bi-2212 powder by 21 C. Therefore, the maximum heat treatment temperature of Ag containing samples can be markedly lowered leading to a reduction of the amount of secondary phases. In addition, Ag enhances slightly the texture over the entire cross section and as a result j(sub c) at 77 K/0 T.

Heeb, B.↗
NASA NTRS1995

Tape casting and partial melting of Bi-2212 thick films

To produce Bi-2212 thick films with high critical current densities tape casting and partial melting is a promising fabrication method. Bi-2212 powder and organic additives were mixed into a slurry and tape casted onto glass by the doctor blade tape casting process. The films were cut from the green tape and partially molten on Ag foils during heat treatment. We obtained almost single-phase and well-textured films over the whole thickness of 20 microns. The orientation of the (a,b)-plane of the grains was parallel to the substrate with a misalignment of less than 6 deg. At 77 K/0T a critical current density of 15, 000 A/sq cm was reached in films of the dimension 1 cm x 2 cm x 20 microns (1 micron V/cm criterion, resistively measured). At 4 K/0T the highest value was 350,000 A/sq cm (1 nV/cm criterion, magnetically measured).

Buhl, D.↗
NASA NTRS1996

Effect of melt-solid interface shape on lateral compositional distribution of unidirectionally solidified 2-6 semiconducting alloys

A computer code developed previously has been used to simulate lateral compositional distributions for several 2-6 semiconducting systems. The code is based on analytical results obtained previously. The system under study is an azimuthal symmetric cylindrical system with a curved melt-solid interface shape during an unidirectional solidification process. It is assumed that the system is under a steady state diffusion limited growth condition.

Wang, Jai-Ching↗
NASA NTRS1995

Measurements of the Viscosity of the Undercooled Melts Under the Conditions of Microgravity and Supporting MHD Calculations

This report covers the work to support the measurement of the surface tension and viscosity of undercooled metals with the TEMPUS as a part of the IML-2 mission. This work consisted of two parts. First was the ground-based research program, whose purpose was to establish the feasibility of the flight program and to establish the knowledge base necessary to plan a successful flight program. Analytical calculations established a fundamental understanding of the problem, and then a more rigorous program of numerical calculations was employed in the development of the experimental program. The second part of the covered research was the actual flight program, developed in close collaboration with Prof. Egry. A metal sphere was levitated and melted, and then set oscillating by 'squeezing' it with the magnetic field. The droplet's oscillations were recorded on videotape and digital image analysis was employed in reduction of the data. The experiment was successful because surface tension measurements were obtained for the gold and gold-copper alloy samples. This data provides unique experimental evidence in support of theories about electromagnetic levitation on the ground. Because of unforeseen difficulties with stability of liquid samples in TEMPUS, the viscosity measurements were not possible, but the data collection and analysis techniques were well proven in this mission. Further research is being conducted regarding the measurement of viscosity by this technique.

Szekely, Julian↗
NASA NTRS1992

An Improved Computational Technique for Calculating Electromagnetic Forces and Power Absorptions Generated in Spherical and Deformed Body in Levitation Melting Devices

An improved computational technique for calculating the electromagnetic force field, the power absorption and the deformation of an electromagnetically levitated metal sample is described. The technique is based on the volume integral method, but represents a substantial refinement; the coordinate transformation employed allows the efficient treatment of a broad class of rotationally symmetrical bodies. Computed results are presented to represent the behavior of levitation melted metal samples in a multi-coil, multi-frequency levitation unit to be used in microgravity experiments. The theoretical predictions are compared with both analytical solutions and with the results or previous computational efforts for the spherical samples and the agreement has been very good. The treatment of problems involving deformed surfaces and actually predicting the deformed shape of the specimens breaks new ground and should be the major usefulness of the proposed method.

Zong, Jin-Ho↗
NASA NTRS1998

Laser Heated Oxide Fiber Growth Using Melt Modulation Technique

As a reinforcement for structural composites, single crystal alumina fibers offer low density, high modulus, and high creep resistance. In this study, the laser heated float zone approach was employed to grow c-axis Al2O3 continuous fibers of high purity and high strength. A new melt modulation technique, laser scanning, avoids the formation of surface induced ripples and allows the growth of 50 micro-m diameter sapphire fibers with strengths (approx. 7 GPa) significantly greater than either commercially available fibers grown by the edge-defined film growth process (approx. 2-3 GPa) or laboratory fibers grown by stationary laser heating (approx. 5 GPa). The present work suggests that surface striations are the predominant defects controlling the tensile strength of laser-scanned fibers at room temperature. Several possible mechanisms for inducing surface striations are systematically discussed for several oxide fiber compositions.

Sayir, Ali↗