Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

The Cascaded Arc: High Flows of Rovibrationally Excited H{sub 2} and its Impact on H{sup -} Ion Formation

The cascaded arc is a plasma source providing high fluxes of excited and reactive species such as ions, radicals and rovibrationally excited molecules. The plasma is produced under pressures of some kPa in a direct current arc with electrical powers up to 10 kW. The plasma leaves the arc channel through a nozzle and expands with supersonic velocity into a vacuum-chamber kept by pumps at low pressures. We investigated the case of a pure hydrogen plasma jet with and without an applied axial magnetic field that confines ions and electrons in the jet. Highly excited molecules and atoms were detected by means of laser-induced fluorescence and optical emission spectroscopy. In case of an applied magnetic field the atomic state distribution of hydrogen atoms shows an overpopulation between the electronic states p = 5, 4 and 3. The influence of the highly excited hydrogen molecules on H{sup -} ion formation and a possible mechanism involving this negative ion and producing atomic hydrogen in state p = 3 will be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Model of a SNS Electrostatic LEBT with a Near-Ground Beam Chopper

The low energy beam transport (LEBT) of the Spallation Neutron Source (SNS) accelerator consists of two electrostatic lenses, of which the second is split into four electrically-isolated segments. Adding fast pulsed voltages to the lens high voltage creates the transverse fields required for beam chopping. Electric sparks, however, create transients that enter the fast high-voltage switches, which are occasionally damaged and cause machine downtime. This work models a new configuration of the electrostatic LEBT, which chops the beam with four shielded, near-ground electrodes between the two lenses. The model shows that the new configuration can match the RFQ injection requirements and sufficiently deflect the beam in the phase-space using the same chopping voltages as in the baseline LEBT.

43 PARTICLE ACCELERATORS↗

Spectroscopic analysis of the excitation transfer from background air to diffusing aluminum laser produced plasma

During the relaxation of the plasma plume generated by laser ablation of an aluminum target, a pronounced intensity enhancement is observed at the central wavelength of the 396.15 nm self-reversed resonant line. This spectral special feature is analyzed and related to the interaction of the plasma edge with the background air excited by the shockwave, prompt electrons, and extreme ultraviolet radiation produced at the earliest times of the ablation. In this article, the electron density, the aluminum ground state, and resonant level populations are determined from the fitting of the 396.15 nm calculated line profile to the experimental one at two background pressures (100 and 1000 Pa). The evolution of these densities is derived from experiments performed at delays, after the laser pulse arrival, ranging from 120 to 180 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of hydration on the structure of caveolae membranes

In situ energy dispersive x-ray diffraction was used to investigate the effect of hydration on the structure of caveolae membranes. The structure of caveolae membrane was found to be strongly dependent on hydration. At low hydration two lamellar phases with distinct repeat spacings were found to coexist with segregated cholesterol crystallites. Upon hydration, the lamellar phases did swell, while diffraction peak of cholesterol crystals disappeared suggesting that cholesterol molecules redistributed homogeneously within the caveolae membrane. At full hydration, unbinding of caveolae membrane occurred. Upon dehydration the system returned to the bound state, demonstrating that the unbinding transition is fully reversible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reducing current loss of laser-driven fast electron beams propagating in solid-density plasmas

A scheme to reduce the current loss of laser-driven energetic electron beams propagating in solid-density targets is proposed. In the scheme, two intense laser pulses irradiate the solid target consisting of two materials, one enveloping the other. Because of the resistivity and density gradients at the material interface, the first pulse generates tens of megagauss robust interface magnetic fields that can considerably reduce the divergence of the electron beam generated by the second pulse. It is shown that by using a coaxial gold-aluminum target instead of a simple gold target, beam current loss can be lowered by about 30%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Short pulse, high power microwave radiation source with a laser-induced sheet plasma mirror

We have demonstrated the short pulse, high power microwave radiation source using an ultraviolet laser-induced sheet plasma mirror in a gas-filled x-band rectangular waveguide from the conventional microwave sources and components. A laser-induced sheet plasma with an overdense plasma acts as a plasma mirror. The long pulse propagating in the gas-filled waveguide was sliced by the sheet plasma mirror at two different points along the waveguide. We observed about twice the power of the pulse by adding the two sliced microwave pulses produced by this scheme. A maximum peak power of 200 kW with a pulse duration of 10 ns (full width at half maximum) from the long microwave pulse source with a pulse duration of 0.8 mus was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion energy distribution near a plasma meniscus for multielement focused ion beams

The axial ion energy spread near a plasma meniscus for multielement focused ion beams is investigated experimentally in atomic and molecular gaseous plasmas of krypton, argon, and hydrogen by tailoring the magnetic field in the region. In the case of magnetic end plugging, the ion energy spread reduces by approx50% near the meniscus as compared to the bulk plasma, thereby facilitating beam focusing. A quadrupole filter can be used to control the mean energy of the ions. Comparison with standard Maxwellian and Druyvesteyn distributions with the same mean energy indicates that the ion energy distribution in the meniscus is deficient in the population of low and high energy tail ions, resulting in a Gaussian-like profile with a spread of approx4 and approx5 eV for krypton and argon ions, respectively. By carefully tuning the wave power, plasma collisionality, and the magnetic field in the meniscus, the spread can be made lower than that of liquid metal ion sources, for extracting focused ion beams of other elements with adequate current density, for research and applications in nanosystems

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modulated transverse off-plane dust-lattice wave packets in hexagonal two-dimensional dusty plasma crystals

The propagation of nonlinear dust-lattice waves in a two-dimensional hexagonal crystal is investigated. Transverse (off-plane) dust grain oscillatory motion is considered in the form of a backward propagating wave packet whose linear and nonlinear characteristics are investigated. An evolution equation is obtained for the slowly varying amplitude of the first (fundamental) harmonic by making use of a two-dimensional lattice multiple scales technique. An analysis based on the continuum approximation (spatially extended excitations compared to the lattice spacing) shows that wave packets will be modulationally stable and that dark-type envelope solitons (density holes) may occur in the long wavelength region. Evidence is provided of modulational instability and of the occurrence of bright-type envelopes (pulses) at shorter wavelengths. The role of second neighbor interactions is also investigated and is shown to be rather weak in determining the modulational stability region. The effect of dissipation, assumed negligible in the algebra throughout the article, is briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle model analyses of N{sub 2}O dilution with He on electrical characteristics of radio-frequency discharges

The electrical characteristics (voltage, electric field, charged particle densities, dissipated power, particle energy, etc.) are analyzed in the case of low pressure (0.5 and 1 Torr) radio-frequency (rf) discharges in nitrous oxide (N{sub 2}O)/Helium (He) mixtures. An optimized and validated particle model has been used for these analyses in the case of gradual dilutions of N{sub 2}O with He buffer gas. A specific care is carried on the power density evolution and variation which show a complex behavior as a function of He proportion (up to 85%). These analyses are based on a microscopic approach enabling one to show the contribution of the different inelastic processes mainly between electrons and respectively N{sub 2}O and He gases. This approach enables also one to show the discharge region (the positive column or the plasma region) where the power is preferentially dissipated. The power density variation is found to be mainly proportional to the electron density variation. The latter is dependent on the different processes occurring between the charged particles [i.e., electrons, negative ions (O{sup -} and NO{sup -}), and positive ions (N{sub 2}O{sup +} and He{sup +})] and the neutral gas mixture (N{sub 2}O and He). Furthermore, the particle model shows the role of the electron-He collisions on the variation in the electron energy and distribution. This allows more particularly explaining the effects of N{sub 2}O dilution with He on the dissipated power variation in terms of creation and loss of electrons through collision processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Filamentation in argon microwave plasma at atmospheric pressure

Filamentation in an argon plasma is studied using a microwave cavity at atmospheric pressure. We show that the size and gas temperature of the filaments increase with the power absorbed by the plasma. The appearance of an additional filament occurs at specific values of the absorbed power. Each new filament appears with a smaller diameter than that of its parent filament but the sum of the diameters of all filaments evolves linearly with the absorbed power. A secondary filament emerges from a set of microfilaments created by a perturbation of the electric field (a slight increase in the incident power above a threshold value). This perturbation occurs over a larger radius than that of the parent filament. By resorting to modeling, we found that the filamentation process involves either a decrease in the effective frequency for momentum-transfer collisions, i.e., a lower electron temperature, or an increase in the electron density. We could show that a small change in the relative positions occupied by two filaments in the microwave cavity requires a strong variation in the electron temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of electron temperature and density on ion-dust bremsstrahlung spectrum in dusty plasmas

The effects of electron temperature and density on the ion-dust grain bremsstrahlung process in dusty plasmas are studied. The ion-dust bremsstrahlung radiation cross section is obtained as a function of the dust charge, dust radius, Debye length, collision energy, radiation energy, electron density, and electron temperature by using the Born approximation. It is shown that the ion-dust bremsstrahlung radiation cross section decreases with an increase in the electron density in dusty plasmas. It is also shown that the electron temperature suppresses the bremsstrahlung radiation cross section. In addition, the effect of electron temperature on the ion-dust bremsstrahlung process is found to be more significant than the effect of electron density in dusty plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of rf power on electron density and temperature, neutral temperature, and T{sub e} fluctuations in an inductively coupled plasma

Atomic clocks that fly on global-navigation satellites such as global positioning system (GPS) and Galileo employ light from low-temperature, inductively coupled plasmas (ICPs) for atomic signal generation and detection (i.e., alkali/noble-gas rf-discharge lamps). In this application, the performance of the atomic clock and the capabilities of the navigation system depend sensitively on the stability of the ICP's optical emission. In order to better understand the mechanisms that might lead to instability in these rf-discharge lamps, and hence the satellite atomic clocks, we studied the optical emission from a Rb/Xe ICP as a function of the rf power driving the plasma. Surprisingly, we found that the electron density in the plasma was essentially independent of increases in rf power above its nominal value (i.e., 'rf-power gain') and that the electron temperature was only a slowly varying function of rf-power gain. The primary effect of rf power was to increase the temperature of the neutrals in the plasma, which was manifested by an increase in Rb vapor density. Interestingly, we also found evidence for electron temperature fluctuations (i.e., fluctuations in the plasma's high-energy electron content). The variance of these fluctuations scaled inversely with the plasma's mean electron temperature and was consistent with a simple model that assumed that the total electron density in the discharge was independent of rf power. Taken as a whole, our results indicate that the electrons in alkali/noble-gas ICPs are little affected by slight changes in rf power and that the primary effect of such changes is to heat the plasma's neutral species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional model of magnetized capacitively coupled plasmas

A three-dimensional plasma model is used to understand the characteristics of magnetized capacitively coupled plasma discharges. The simulations consider plasmas generated using high frequency (13.5 MHz) and very high frequency (162 MHz) sources, electropositive (Ar) and electronegative (O{sub 2}) gases, and spatially uniform and nonuniform magnetic fields. Application of a magnetic field parallel to the electrodes is found to enhance the plasma density due to improved electron confinement and shift the plasma due to the ExB drift. The plasma is electrically symmetric at 162 MHz so it drifts in opposite directions adjacent to the two electrodes due to the ExB drift. On the other hand, the 13.5 MHz plasma is electrically asymmetric and it predominantly moves in one direction under the influence of the ExB drift. The ExB drift focuses the plasma into a smaller volume in regions with convex magnetic field lines. Conversely, the ExB drift spreads out the plasma in regions with concave magnetic field lines. In a magnetized O{sub 2} plasma, the overall plasma is found to move in one direction due to the ExB drift while the plasma interior moves in the opposite direction. This behavior is linked to the propensity of negative ions to reside in regions of peak plasma potential, which moves closer to the chamber center opposite to the ExB drift direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of He in enhancing the intensity and lifetime of H and D emissions from laser-induced atmospheric-pressure plasma

A series of measurements have been performed on the time dependences of the intensities of helium, hydrogen, and deuterium emission lines from the corresponding laser-induced helium plasma at atmospheric pressure for two different He flow rates. The prolonged H{sub a}lpha and H{sub b}eta emissions along with their constant intensity ratio over a relatively extended period indicate the need to provide an alternative excitation mechanism other than the well-known thermal excitation process in a hot plasma. This additional excitation mechanism is also related to the metastable excited state of a He atom as indicated by the similar characteristics of the observed time dependence of the emission intensities. The enhanced intensity and lifetime of He emission at a high He flow rate was explained in terms of the collision-induced increase in the number of He atoms excited to above the 2 {sup 1}S{sub 0} metastable state, which was also responsible for the delayed excitation of H and D atoms via an energy transfer mechanism involving a Penning-like chemi-ionization process. Finally, the benefits of He-assisted delayed excitation of H and D atoms and the aforementioned enhanced intensity and lifetime at a high He flow rate were demonstrated by the achievement of clearly resolved H{sub a}lpha and D{sub a}lpha emission lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast discharge in a plasma gun with hemispherical insulator

A method of creation of hot dense plasma is proposed. It is based on cumulation of a shockwave, which originates on a hemispherical surface of insulator of plasma gun. The results of first experiments are presented. The shock wave is driven by fast electrical discharge (dI/dt>10{sup 12} A/s). The inductive storage with semiconductor opening switch is used as a current driver. Time resolved pin-hole images and vacuum ultraviolet (vuv) spectra are studied. Shockwaves from hemispherical insulator with 4 mm radius create plasma with a form of column about 1 mm diameter and 3-4 mm length. vuv spectra contain the lines of Ar ions that corresponds to the electron temperature about 20 eV. Possible practical application is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-of-flight observation of electron swarm in methane

This paper reports on the evolution of an isolated electron swarm, which is experimentally observed as spatial distributions at every moment. This observation is assumed to directly correspond to the conventional time-of-flight theory. We have measured the spatial distribution of electrons using a double-shutter technique in the drift tube, where a shutter electrode to collect electrons can be slid along the field (E/N) direction in order to capture a relative electron number at a certain range of location. As a typical parameter defined by this spatial distribution, the center-of-mass drift velocity (W{sub r}) is determined for methane gas. The result is compared with the mean-arrival-time drift velocity (W{sub m}) defined from the arriving electron number at fixed positions. We have also performed a theoretical analysis in which a Fourier transformed Boltzmann equation is solved to deduce both of the drift velocities from a dispersion relationship. The difference between W{sub r} and W{sub m} at high E/Ns (above 200 Td) is clearly ascertained in the experimental and theoretical investigations, which is attributable to the occurrence of ionization events.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stabilization of the ionization overheating thermal instability in atmospheric pressure microplasmas

Stable direct current atmospheric pressure plasmas can regularly be generated in air using microplasma systems, and rapid cooling due to the small size is typically suggested as the thermally stabilizing mechanism. However, temperatures of the stable discharges are significantly higher than ambient, and stable operation is not easily achieved in all gases at similar sizes. Revisiting a traditional analysis of the thermal instability, we find that the inclusion of the simple ballasted external circuit in the analysis leads to additional stabilizing mechanisms. This stabilization occurs in microplasmas due to the characteristic times of the external circuit and the instability being comparable, which allows the electric field to change during the time frame of the instability. Experimentally this is implemented by reducing the stray capacitance of the external circuit. This stabilizing mechanism is verified in several gases and its application in a plasma enhanced chemical vapor deposition system leads to a more uniform film deposition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the electron energy in the high power impulse magnetron sputtering discharge

The temporal variation of the electron energy distribution function (EEDF) was measured with a Langmuir probe in a high power impulse magnetron sputtering (HiPIMS) discharge at 3 and 20 mTorr pressures. In the HiPIMS discharge a high power pulse is applied to a planar magnetron giving a high electron density and highly ionized sputtered vapor. The measured EEDF is Maxwellian-like during the pulse; it is broader for lower discharge pressure and it becomes narrower as the pulse progresses. This indicates that the plasma cools as the pulse progresses, probably due to high metal content of the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗