Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “exploration techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Bayesian learning of orthogonal embeddings for multi-fidelity Gaussian Processes

Uncertainty propagation in complex engineering systems often poses significant computational challenges related to modeling and quantifying probability distributions of model outputs, as those emerge as the result of various sources of uncertainty that are inherent in the system under investigation. Gaussian Processes regression (GPs) is a robust meta-modeling technique that allows for fast model prediction and exploration of response surfaces. Multi-fidelity variations of GPs further leverage information from cheap and low fidelity model simulations in order to improve their predictive performance on the high fidelity model. In order to cope with the high volume of data required to train GPs in high dimensional design spaces, a common practice is to introduce latent design variables that are typically projections of the original input space to a lower dimensional subspace, and therefore substitute the problem of learning the initial high dimensional mapping, with that of training a GP on a low dimensional space. Here in this paper, we present a Bayesian approach to identify optimal transformations that map the input points to low dimensional latent variables. The \projection" mapping consists of an orthonormal matrix that is considered a priori unknown and needs to be inferred jointly with the GP parameters, conditioned on the available training data. The proposed Bayesian inference scheme relies on a two-step iterative algorithm that samples from the marginal posteriors of the GP parameters and the projection matrix respectively, both using Markov Chain Monte Carlo (MCMC) sampling. In order to take into account the orthogonality constraints imposed on the orthonormal projection matrix, a Geodesic Monte Carlo sampling algorithm is employed, that is suitable for exploiting probability measures on manifolds. We extend the proposed framework to multi-fidelity models using GPs including the scenarios of training multiple outputs together. We validate our framework on three synthetic problems with a known lower-dimensional subspace. The benefits of our proposed framework, are illustrated on the computationally challenging aerodynamic optimization of a last-stage blade for an industrial gas turbine, where we study the effect of an 85-dimensional shape parameterization of a three-dimensional airfoil on two output quantities of interest, specifically on the aerodynamic efficiency and the degree of reaction

42 ENGINEERING↗

Thyroid Function in Women after Multimodal Treatment for Breast Cancer Stage II/III: Comparison With Controls From a Population Sample

Purpose: A possible association between thyroid diseases (TD) and breast cancer (BC) has been debated. We examined prevalence and development of TD in women after multimodal treatment for Stage II/III BC compared with women from a general population. Secondarily, we explored the impact of two different radiotherapy (RT) techniques (standardized field arrangements vs. computed tomography [CT]-based dose planning) on TD in BC patients examined 35-120 months after primary BC treatment. Methods and Materials: A total of 403 BC patients completed a questionnaire about TD and had blood samples taken for analyses of thyroid function. All had undergone postoperative RT with or without (2%) adjuvant systemic treatment. The results in the BC patients were compared with a cancer-free, age-matched control group from a general population (CGr). Results: There was higher prevalence of self-reported hypothyroidism in the BC patients as compared with the CGr (18% vs. 6%, p < 0.001). The raised prevalence was predominantly due to a substantial increase in the development of hypothyroidism after BC diagnosis, whereas the prevalence of hypothyroidism before BC diagnosis was similar to that observed in the CGr. Patients treated with CT-based RT showed a trend for increased post-BC development of hypothyroidism as compared with those treated with standardized field arrangements (p = 0.08). Conclusions: Hypothyroidism is significantly increased in women after multimodal treatment for Stage II/III BC. Radiation to the thyroid gland may be a contributing factor. BC patients should be routinely screened for hypothyroidism.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Spectral methods in the presence of discontinuities

Spectral methods provide an elegant and efficient way of numerically solving differential equations of all kinds. For smooth problems, truncation error for spectral methods vanishes exponentially in the infinity norm and L 2 -norm. However, for non-smooth problems, convergence is significantly worse—the L 2 -norm of the error for a discontinuous problem will converge at a sub-linear rate and the infinity norm will not converge at all. We explore and improve upon a post-processing technique—optimally convergent mollifiers—to recover exponential convergence from a poorly-converging spectral reconstruction of non-smooth data. Furthermore this is an important first step towards using these techniques for simulations of realistic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the volume fraction of precipitates in a nitrided Fe-0.354 wt% C-2.93 wt% Cr model alloy by anomalous small angle X-ray scattering

Highlights: • Anomalous small-angle X-ray scattering (ASAXS) is used to study nitriding of Fe-Cr-C steels. • ASAXS gives access to chemical information of nanoscaled nitrides. • The volume fraction of nitrides is determined along the diffusion layer. - Abstract: Anomalous small angle scattering (ASAXS) is a powerful non-destructive technique that can provide characteristic features of nanoscale precipitates such as the volume fraction, and chemical composition. In this paper, the technique is used for the first time to explore nanoscale MN nitrides (M = Cr,Fe) after nitriding of a model iron alloy (Fe-0.354 wt% C-2.93 wt% Cr).

36 MATERIALS SCIENCE↗

Nonclinical safety strategies for stem cell therapies

Recent breakthroughs in stem cell biology, especially the development of the induced pluripotent stem cell techniques, have generated tremendous enthusiasm and efforts to explore the therapeutic potential of stem cells in regenerative medicine. Stem cell therapies are being considered for the treatment of degenerative diseases, inflammatory conditions, cancer and repair of damaged tissue. The safety of a stem cell therapy depends on many factors including the type of cell therapy, the differentiation status and proliferation capacity of the cells, the route of administration, the intended clinical location, long term survival of the product and/or engraftment, the need for repeated administration, the disease to be treated and the age of the population. Understanding the product profile of the intended therapy is crucial to the development of the nonclinical safety study design.

60 APPLIED LIFE SCIENCES↗

Crystal Morphology and Phase Transformation of LiAlO 2 : Combined Experimental and First-Principles Studies

Layered α-LiAlO 2 matrix often suffers from detrimental structural and morphological changes during its lifetime, especially under H 2 containing fuel inlet environments of molten carbonate fuel cell systems. However, the underlying mechanism of this phase and morphological transformations has rarely been explored. In this study, transmission electron microscopy (TEM) techniques were used to determine the changes in structure and morphology of LiAlO 2 samples lifted by a focused ion beam (FIB). In accordance with X-ray diffraction (XRD) analysis, TEM images show that under H-rich conditions the rhombohedral α-LiAlO 2 transforms to tetragonal γ-LiAlO 2 phase with the appearance of the (101) terminated octahedral shaped γ-LiAlO 2 crystallites. We further support, and plausibly rationalize, the observed transformations using density functional theory (DFT) calculation. The DFT computed surface energies of γ-LiAlO 2 reveal that the {101} surface becomes the lowest energy surface upon H-adsorption, thus leading to formation of observed octahedral geometry. Contrary to stabilization of γ-LiAlO 2 surfaces upon H passivation, DFT revealed H-adsorption on α-LiAlO 2 surfaces to be energetically unfavorable. Furthermore, this contrasting behavior of α-LiAlO 2 and γ-LiAlO 2 under H-rich environments could be a potential driving force for the observed α-LiAlO 2 to γ-LiAlO 2 phase transformation.

36 MATERIALS SCIENCE↗

Evaluating microstructure evolution in an SOFC electrode using digital volume correlation

Degradation mechanisms within solid oxide fuel cells (SOFC) during thermal cycling limit operational start-up times and cell lifetime, and must therefore be better understood and mitigated. This work explores such mechanisms using digital volume correlation (DVC) techniques applied to lab-based X-ray tomograms where the microstructural evolution is evaluated during the operational cycling of a Ni–YSZ/YSZ cell. To emulate reduced start-up times, five tomograms were collected over four operational thermal cycles to 750 °C at various ramp-rates: 3, 10, 20 and 30 °C min –1 . Two key features are observed in the 3D strain profiles. Firstly, during low ramp-rates the material produces microscopic channels towards cluster-points. This is thought to be caused by the ceramic skeleton inhibiting the effects of sintering. Secondly, previously unseen macroscopic ‘waves’ developed after high-rate cycling, consisting of linear regions of compression and tension throughout the sample. These wave features decay away from a heterogeneous defect which is thought to be responsible for the non-uniform strain profile. This work demonstrates the first use of sub-micron DVC computations applied to an SOFC exposed to operationally relevant temperatures. Lastly, these findings will assist in the development of new electrode materials from their fabrication to operation, ultimately supporting commercial viability of SOFCs.

30 DIRECT ENERGY CONVERSION↗

Dynamics of polymer electrolyte with LiTFSI via Quasi-Elastic Neutron Scattering

Most lithium batteries offer a wide range of applications. However, safety issues are still an unresolved issue for several applications. To solve the safety issue of Li-ion batteries, solid polymer electrolyte is a promising candidate to replace commercial liquid electrolyte. A 4-arm star poly(ethylene oxide) polymer with LiTFSI salt as an electrolyte was studied. The dynamics of this polymer were explored with the Quasi-Elastic Neutron Scattering technique. Furthermore, the influence of temperature and Li salt concentration on the polymer dynamics was investigated. The dynamics of the polymer ends of the arm show much higher flexibility than the core parts making those types of polymers attractive for further studies in battery research.

Wang, Hui↗

High repetition rate laser systems: targets, diagnostics and radiation protection

Accessing the high repetition regime of ultra intense laser-target interactions at small or moderate laser energies is now possible at a large number of facilities worldwide. New projects such as HiPER and ELI promise to extend this regime to the high energy realm at the multi-kJ level. This opportunity raises several issues on how best to approach this new regime of operation in a safe and efficient way. At the same time, a new class of experiments or a new generation of secondary sources of particles and radiation may become accessible, provided that target fabrication and diagnostics are capable of handling this rep-rated regime. In this paper, we explore this scenario and analyse existing and perspective techniques that promise to address some of the above issues.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement Issues In Pulsed Laser Propulsion

Various measurement techniques have been used throughout the over 40-year history of laser propulsion. Often, these approaches suffered from inconsistencies in definitions of the key parameters that define the physics of laser ablation impulse generation. Such parameters include, but are not limited to the pulse energy, spot area, imparted impulse, and ablated mass. The limits and characteristics of common measurement techniques in each of these areas will be explored as they relate to laser propulsion. The idea of establishing some standardization system for laser propulsion data is introduced in this paper, so that reported results may be considered and studied by the general community with more certain understanding of particular merits and limitations. In particular, it is the intention to propose a minimum set of requirements a literature study should meet. Some international standards for measurements are already published, but modifications or revisions of such standards may be necessary for application to laser ablation propulsion. Issues relating to development of standards will be discussed, as well as some examples of specific experimental circumstances in which standardization would have prevented misinterpretation or misuse of past data.

36 MATERIALS SCIENCE↗

LaAlO{sub 3}/Si capacitors: Comparison of different molecular beam deposition conditions and their impact on electrical properties

A study of the structural and electrical properties of amorphous LaAlO{sub 3} (LAO)/Si thin films fabricated by molecular beam deposition (MBD) is presented. Two substrate preparation procedures have been explored namely a high temperature substrate preparation technique-leading to a step and terraces surface morphology-and a chemical HF-based surface cleaning. The LAO deposition conditions were improved by introducing atomic plasma-prepared oxygen instead of classical molecular O{sub 2} in the chamber. An Au/Ni stack was used as the top electrode for its electrical characteristics. The physico-chemical properties (surface topography, thickness homogeneity, LAO/Si interface quality) and electrical performance (capacitance and current versus voltage and TunA current topography) of the samples were systematically evaluated. Deposition conditions (substrate temperature of 550 Degree-Sign C, oxygen partial pressure settled at 10{sup -6} Torr, and 550 W of power applied to the O{sub 2} plasma) and post-depositions treatments were investigated to optimize the dielectric constant ({kappa}) and leakage currents density (J{sub Gate} at Double-Vertical-Line V{sub Gate} Double-Vertical-Line = Double-Vertical-Line V{sub FB}- 1 Double-Vertical-Line ). In the best reproducible conditions, we obtained a LAO/Si layer with a dielectric constant of 16, an equivalent oxide thickness of 8.7 A, and J{sub Gate} Almost-Equal-To 10{sup -2}A/cm{sup 2}. This confirms the importance of LaAlO{sub 3} as an alternative high-{kappa} for ITRS sub-22 nm technology node.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical prediction of rare gas inserted hydronium ions: HRgOH{sub 2}{sup +}

A possibility of existence of new species through insertion of a rare gas atom in hydronium ion resulting into HRgOH{sub 2}{sup +} cation (Rg = He, Ar, Kr, and Xe) has been explored by using various ab initio quantum chemical techniques. Structure, harmonic vibrational frequencies, stability, and charge distribution of HRgOH{sub 2}{sup +} species as obtained using density functional theory, second order Moller-Plesset perturbation theory, and coupled-cluster theory based methods are reported in this work. All the calculated results suggest that the HRgOH{sub 2}{sup +} species are stable enough with respect to all the dissociation channels, except the 2-body dissociation path (H{sub 3}O{sup +}+ Rg). Nevertheless, this 2-body dissociation channel connected through the relevant transition state is associated with a finite barrier, which in turn would prevent the metastable species in transforming to global minimum products. The calculated values of topological properties within the framework of quantum theory of atoms-in-molecules are found to be consistent with the bond length values. Structural and energetic parameters clearly suggest that it might be possible to prepare and characterize the HRgOH{sub 2}{sup +} species (except HHeOH{sub 2}{sup +}) using electron bombardment matrix isolation technique in a way similar to that of the preparation of (Rg{sub 2}H){sup +} or mixed (RgHRg{sup Prime }){sup +} cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, strain, and composition profiling of InAs/GaAs(211)B quantum dot superlattices

The morphology, nanostructure, and strain properties of InAs quantum dots (QDs) grown on GaAs(211)B, uncapped or buried, are explored by transmission electron microscopy and related quantitative techniques. Besides the built-in piezoelectric field, other differences of (211) growth compared to (100)-oriented growth are discussed in terms of the (211) surface non-singularity, leading to anisotropic shape of the QDs and local chemical inhomogeneity of the wetting layer. The shape of the uncapped QDs was precisely defined as truncated pyramidal, elongated along the 〈111〉 direction, and bounded by the (110), (100), and (213) facets. Local strain measurements showed that large surface QDs were almost unstrained due to plastic relaxation, exhibiting small residual elastic strain at the interface that gradually diminished toward their apex. Conversely, buried QDs were pseudomorphically grown on GaAs. By postulating a plane stress state, we have established a systematic increase of the local strain from the base toward the apex region of the QDs. Using Vegard's law, their chemical composition profiles were calculated, revealing an indium content gradient along the growth direction and compositional variants among different QDs. Photoluminescence measurements showed variations in emission energy between the QDs and consistency with a graded In-content, which complied with the quantitative strain analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lithium ion intercalation in thin crystals of hexagonal TaSe 2 gated by a polymer electrolyte

Ionic liquid gating has been used to modify the properties of layered transition metal dichalcogenides (TMDCs), including two-dimensional (2D) crystals of TMDCs used extensively recently in the device work, which has led to observations of properties not seen in the bulk. The main effect comes from the electrostatic gating due to the strong electric field at the interface. In addition, ionic liquid gating also leads to ion intercalation when the ion size of the gate electrolyte is small compared to the interlayer spacing of TMDCs. However, the microscopic processes of ion intercalation have rarely been explored in layered TMDCs. Here, we employed a technique combining photolithography device fabrication and electrical transport measurements on the thin crystals of hexagonal TaSe2 using multiple channel devices gated by a polymer electrolyte LiClO 4 /Polyethylene oxide (PEO). The gate voltage and time dependent source-drain resistances of these thin crystals were used to obtain information on the intercalation process, the effect of ion intercalation, and the correlation between the ion occupation of allowed interstitial sites and the device characteristics. We found a gate voltage controlled modulation of the charge density waves and a scattering rate of charge carriers. Furthermore our work suggests that ion intercalation can be a useful tool for layered materials engineering and 2D crystal device design.

36 MATERIALS SCIENCE↗

INFORMATION CONTENT OF EXOPLANETARY TRANSIT SPECTRA: AN INITIAL LOOK

It has been shown that spectroscopy of transiting extrasolar planets can potentially provide a wealth of information about their atmospheres. Herein, we set up the inverse problem in spectroscopic retrieval. We use nonlinear optimal estimation to retrieve the atmospheric state (pioneered for Earth sounding by Rodgers). The formulation quantifies the degrees of freedom and information content of the spectrum with respect to geophysical parameters; herein, we focus specifically on temperature and composition. First, we apply the technique to synthetic near-infrared spectra and explore the influence of spectral signal-to-noise ratio and resolution (the two important parameters when designing a future instrument) on the information content of the data. As expected, we find that the number of retrievable parameters increases with increasing signal-to-noise ratio and resolution, although the gains quickly level off for large values. Second, we apply the methods to the previously studied dayside near-infrared emission spectrum of HD 189733b and compare the results of our retrieval with those obtained by others.

79 ASTRONOMY AND ASTROPHYSICS↗

Error mitigation, optimization, and extrapolation on a trapped-ion testbed

Current noisy intermediate-scale quantum (NISQ) trapped-ion devices are subject to errors which can significantly impact the accuracy of calculations if left unchecked. A form of error mitigation called zero noise extrapolation (ZNE) can decrease an algorithm’s sensitivity to these errors without increasing the number of required qubits. Here we explore different methods for integrating this error mitigation technique into the Variational Quantum Eigensolver (VQE) algorithm for calculating the ground state of the HeH + molecule at 0.8 Å in the presence of experimental noise. Using the Quantum Scientific Computing Open User Testbed (QSCOUT) trapped-ion device, we test three methods of scaling noise for extrapolation: time stretching the two-qubit gates, scaling the sideband detuning parameter, and inserting two-qubit gate identity operations into the ansatz circuit. We find that time stretching and sideband detuning scaling fail to scale the noise on our particular hardware in a way that can be extrapolated to zero noise. Scaling our noise with global gate identity insertions and extrapolating after variational optimization, we achieve error suppression of 96.8%, resulting in an energy estimate within –0.004 ± 0.04 hartree of the ground state energy. This is an improvement, but still outside the chemical accuracy threshold of 0.0016 hartree. Furthermore, our results show that the efficacy of this error mitigation technique depends on choosing the correct implementation for a given device architecture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

End-to-end entanglement in Bose-Hubbard chains

We study the ground state as well as the dynamics of chains of bosons with local repulsive interactions and nearest-neighbor exchange using numerical techniques based on density-matrix decimation. We explore the development of entanglement between the terminal sites of such chains as mechanisms are invoked to concentrate population in these sites. We find that long-range entanglement in the ground state emerges as a result of transfer taking place throughout the chain in systems with appropriate hopping coefficients. Additionally, we find appropriate perturbations to increase the entanglement between the end sites above their ground-state values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lagrangian-Hamiltonian formulation of paraxial optics and applications: Study of gauge symmetries and the optical spin Hall effect

In the context of the paraxial regime, usually valid for optical frequencies and also in the microwave spectrum of guided waves, the propagation of electromagnetic fields can be analyzed through a paraxial wave equation, which is analogous to the nonrelativistic Schroedinger equation of quantum mechanics but replacing time t with spatial coordinate z. Considering that, here it is shown that for lossless media in optical frequencies it is possible to construct a Lagrangian operator with an one-to-one correspondence with nonrelativistic quantum mechanics, which allows someone to use the same mathematical methods and techniques for solving problems. To demonstrate that, we explore a few applications in optics with increasing levels of complexity. In the spirit of a Hamiltonian formulation, the ray-tracing trajectories of geometric optics in paraxial regime are obtained in a clear manner. Following that, the gauge symmetries of the optical-field Lagrangian density is discussed in a detailed way, leading to the general form of the interaction Hamiltonian. Through the use of perturbation theory, we discuss a classical analog for a quantum not gate, making use of mode coupling in an isotropic chiral medium. At last, we explore the optical spin Hall effect and its possible applications using an effective geometric optics equation derived from an interaction Hamiltonian for the optical fields. We also predict within the framework of paraxial optics a spin Hall effect of light induced by gravitational fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗