Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Evolution of A-Type Macrosegregation in Large Size Steel Ingot After Multistep Forging and Heat Treatment

A-type macrosegregation refers to the channel chemical heterogeneities that can be formed during solidification in large size steel ingots. In this research, a combination of experiment and simulation was used to study the influence of open die forging parameters on the evolution of A-type macrosegregation patterns during a multistep forging of a 40 metric ton (MT) cast, high-strength steel ingot. Macrosegregation patterns were determined experimentally by macroetch along the longitudinal axis of the forged and heat-treated ingot. Mass spectroscopy, on more than 900 samples, was used to determine the chemical composition map of the entire longitudinal sectioned surface. FORGE NxT 1.1 finite element modeling code was used to predict the effect of forging sequences on the morphology evolution of A-type macrosegregation patterns. For this purpose, grain flow variables were defined and implemented in a large scale finite element modeling code to describe oriented grains and A-type segregation patterns. Examination of the A-type macrosegregation showed four to five parallel continuous channels located nearly symmetrical to the axis of the forged ingot. In some regions, the A-type patterns became curved or obtained a wavy form in contrast to their straight shape in the as-cast state. Mass spectrometry analysis of the main alloying elements (C, Mn, Ni, Cr, Mo, Cu, P, and S) revealed that carbon, manganese, and chromium were the most segregated alloying elements in A-type macrosegregation patterns. The observed differences were analyzed using thermodynamic calculations, which indicated that changes in the chemical composition of the liquid metal can affect the primary solidification mode and the segregation intensity of the alloying elements. Finite element modeling simulation results showed very good agreement with the experimental observations, thereby allowing for the quantification of the influence of temperature and deformation on the evolution of the shape of the macrosegregation channels during the open die forging process.

36 MATERIALS SCIENCE↗

The Role of Elastic and Plastic Anisotropy of Sn in Recrystallization and Damage Evolution During Thermal Cycling in SAC305 Solder Joints

Because failures in lead-free solder joints occur at locations other than the most highly shear-strained regions, reliability prediction is challenging. To gain physical understanding of this phenomenon, physically based understanding of how elastic and plastic deformation anisotropy affect microstructural evolution during thermomechanical cycling is necessary. Upon solidification, SAC305 (Sn-3.0Ag-0.5Cu) solder joints are usually single or tricrystals. The evolution of microstructures and properties is characterized statistically using optical and orientation imaging microscopy. In situ synchrotron x-ray measurements during thermal cycling are used to examine how crystal orientation and thermal cycling history change strain history. Extensive characterization of a low-stress plastic ball grid array (PBGA) package design at different stages of cycling history is compared with preliminary experiments using higher-stress package designs. With time and thermal history, microstructural evolution occurs mostly from continuous recrystallization and particle coarsening that is unique to each joint, because of the specific interaction between local thermal and displacement boundary conditions and the strong anisotropic elastic, plastic, expansion, and diffusional properties of Sn crystals. The rate of development of recrystallized microstructures is a strong function of strain and aging. Cracks form at recrystallized (random) boundaries, and then percolate through recrystallized regions. Complications arising from electromigration and corrosion are also considered.

36 MATERIALS SCIENCE↗

Microstructure and Sn crystal orientation evolution in Sn-3.5Ag lead-free solders in high temperature packaging applications

Understanding the reliability of eutectic Sn-3.5Ag lead-free solders in high temperature packaging applications is of significant interest in power electronics for the next generation electric grid. Large area (2.5mm 2.5mm) Sn-3.5Ag solder joints between silicon dies and direct bonded copper substrates were thermally cycled between 5 C and 200 C. Sn crystal orientation and microstructure evolution during thermal cycling were characterized by electron backscatter diffraction (EBSD) in scanning electron microscope (SEM). Comparisons are made between observed initial texture and microstructure and its evolution during thermal cycling. Gradual lattice rotation and grain boundary misorientation evolution suggested the continuous recrystallization mechanism. Recrystallization behavior was correlated with dislocation slip activities.

high temperature packaging↗

The Evolution of Second-Phase Particles in 6111 Aluminum Alloy Processed by Hot and Cold Rolling

The evolution of coarse Al{sub 9.9}Fe{sub 2.65}Ni{sub 1.45} phase, spherical Al{sub 12}(Mn,Fe){sub 3}Si phase and rod-like Q phase in a 6111 aluminum alloy during hot and cold rolling deformation processes was systematically investigated in this work. The results showed that the coarse Al{sub 9.9}Fe{sub 2.65}Ni{sub 1.45} particles are mainly distributed at the grain boundaries, accompanied by the co-formation of Al{sub 12}(Fe,Mn){sub 3}Si phase and Mg{sub 2}Si phase, while the spherical Al{sub 12}(Mn,Fe){sub 3}Si particles are mainly distributed in the grain interiors. Hot rolling has little effects on the size and distribution of both phases, but cold deformation can severely decrease the size of the particles by breaking the particles into small pieces. In addition, the temperature of 450 °C is not high enough for the dissolution of Q phase in the Al matrix, but the Q particles can be broken into small pieces due to the stress concentration during both hot and cold rolling deformation. In addition, the influences of phase evolution, dislocations and recrystallization on the mechanical properties evolution were also discussed.

36 MATERIALS SCIENCE↗

A Review of Texture Evolution Mechanisms During Deformation by Rolling in Aluminum Alloys

The current understanding of texture evolution during deformation by rolling in aluminum alloys was summarized. This included understanding the evolution mechanisms and several key factors of initial texture, microstructure, alloy composition, deformation temperature, stress–strain condition, and rolling geometry. Related models on predicting texture evolution during rolling were also discussed. Finally, for this research field, the recommendations for controlling the formation of rolling textures were proposed.

36 MATERIALS SCIENCE↗

Texture Evolution and Its Effect on Fatigue Crack Propagation in Two 2000 Series Alloys

The texture evolution and fatigue crack propagation (FCP) of 2000 series alloys were investigated, respectively, by using scanning electron microscopy and x-ray diffraction. Results showed that the intensity change in different textures (such as Goss, Copper, S and Brass) abides by a linear evolution law, and a new model for texture evolution is proposed to predict the texture intensity during different heat treatments. With increasing annealing temperature, the FCP rate increased, but the damage tolerance decreased. The intensity of P texture was the key to affecting FCP rate and damage tolerance of the alloys. A new model based on the average grain diameter and P texture volume fraction was proposed to predict FCP rate and damage tolerance, and the predicted FCP rates agree very well with the experimental FCP rates of the alloys after different T83 treatments.

36 MATERIALS SCIENCE↗

A Review: Microstructural and Phase Evolution in Alloys during Extended Plastic Deformation

Materials in service and during processing are often subjected to plastic deformation. For multi-phase metallic alloys, simple geometric models and atomistic simulations suggest that two distinctive regimes in these materials’ evolution during deformation exist. At low strains, evolutions are often dominated by the kinetic roughening of interfaces, which results from the superdiffusive transport of matter in sheared crystals. Furthermore, at high strains and temperatures where thermal diffusion is sluggish, on the other hand, shearing- induced forced atomic mixing dominates these evolutions, resulting in significantly enhanced solubility. Distinguishing these two regimes is shown to provide a convenient framework for rationalizing and analyzing recent experiments and simulations on wear of layered structures in the low strain-regime and nonequilibrium phase co-existence and self-organization in highly immiscible or reactive alloy systems in the high-strain regime.

36 MATERIALS SCIENCE↗

The Evolution of the Peridynamics Co-Authorship Network

We report peridynamics is a relatively new field in continuum mechanics that has developed over the past 20 years. This paper studies the evolution of collaborations in the field of peridynamics since its inception using social network analysis. For this purpose, we construct a network for each year from 2000 to 2019 describing co-authorship between scientists in peridynamics. In these networks, each node represents a scientist and each link connects two co-authoring scientists with a link weight representing the frequency and strength of their collaboration; each network as a whole can be thought of as a graph representation of the peridynamics community for the given year. By constructing a network for each year, we are able to analyze the evolution of the network in time and discuss the implications of this evolution for the peridynamics community. Our study demonstrates that the peridynamics community has been growing exponentially in size in recent years. Centrality metrics are also used to identify the most collaborative scientists in the community. Moreover, we compute link recommendations based on both elevating a scientist’s position in the network with respect to certain centrality metrics or closing structural holes in the network identified with persistent homology. We further extend the analysis to higher-order networks whose nodes represent groups of scientists in the community and whose links connect collaborating groups. In some sense, our work studies the past, present, and future of the peridynamics community.

97 MATHEMATICS AND COMPUTING↗

Microstrain temperature evolution in beta-eurcryptite ceramics: Measurement and model

Mechanisms of microcracking and stress release in {beta}-eucryptite ceramics were investigated by applying a combination of neutron diffraction (ND), dilatometry and the Integrity Factor Model (IFM). It was observed that the macroscopic thermal expansion of solid samples closely follows the lattice thermal expansion as a function of temperature, and both are dominated by microcracks closing (during heating) and opening (during cooling). Analogous experiments on powders showed that the stresses that manifest peak shift are indeed relieved by comminution, and that the resulting lattice thermal expansion can be considered as unconstrained. By means of Rietveld refinement of the ND data, the evolution with temperature of peak width parameters linked to strain distributions along the basal, pyramidal and axial planes could also be extracted. The peak width parameters S{sub HKL} correlated well with the strains calculated by peak shift and with the model results. Furthermore, while the peak shifts showed that the powders are basically stress free, the S{sub HKL} showed a strong evolution of the peak width. Powders carry, therefore, a measurable strain distribution inside the particles, owing to the thermal expansion anisotropy of the crystallites. The IFM allowed this behavior to be rationalized, and the effect of microcracking on thermal expansion to be quantified. Experimental data allowed accurate numerical prediction of microcracking on cooling and of the evolution of microstresses. They also allowed the derivation of the material elastic modulus from bulk thermal expansion curves through the IFM concept. Ultrasound resonance measurements of the elastic modulus strongly support these theoretical predictions.

36 MATERIALS SCIENCE↗

Evolution of small defect clusters in ion-irradiated 3C-SiC: Combined cluster dynamics modeling and experimental study

Distribution of black spot defects and small clusters in 1 MeV krypton irradiated 3C-SiC has been investigated using advanced scanning transmission electron microscopy (STEM) and TEM. We find that two thirds of clusters smaller than 1 nm identified in STEM are invisible in TEM images. For clusters that are larger than 1 nm, STEM and TEM results match very well. A cluster dynamics model has been developed for SiC to reveal processes that contribute to evolution of defect clusters and validated against the (S)TEM results. Simulations showed that a model based on established properties of point defects (PDs) generation, reaction, clustering, and cluster dissociation, is unable to predict black spot defects distribution consistent with STEM observations. This failure suggests that additional phenomena not included in a simple point-defect picture may contribute to radiation-induced evolution of defect clusters in SiC and using our model we have determined the effects of a number of these additional phenomena on cluster evolution. Using these additional phenomena it is possible to fit parameters within physically justifiable ranges that yield agreement between cluster distributions predicted by simulations and those measured experimentally.

36 MATERIALS SCIENCE↗

Investigation on temporal evolution of the grain refinement in copper under high strain rate loading via in-situ synchrotron measurement and predictive modeling

Synchrotron X-rays are integrated with a modified Kolsky tension bar to conduct in situ tracking of the grain refinement mechanism operating during the dynamic deformation of metals. Copper with an initial average grain size of 36 μm is refined to 6.3 μm when loaded at a constant high strain rate of 1200 s -1 . The synchrotron measurements revealed the temporal evolution of the grain refinement mechanism in terms of the initiation and rate of refinement throughout the loading test. A multiscale coupled probabilistic cellular automata based recrystallization model has been developed to predict the microstructural evolution occurring during dynamic deformation processes. The model accurately predicts the initiation of the grain refinement mechanism with a predicted final average grain size of 2.4 μm. As a result, the model also accurately predicts the temporal evolution in terms of the initiation and extent of refinement when compared with the experimental results.

36 MATERIALS SCIENCE↗

Electric-field-induced structure and domain texture evolution in PbZrO 3 -based antiferroelectric by in-situ high-energy synchrotron X-ray diffraction

Antiferroelectrics (AFEs) have a great potential for modern electronic devices by virtue of the large strain during the antiferroelectric-to-ferroelectric (AFE-FE) phase transition under external electric fields. Although the fascinating macroscopic properties of AFE materials have been extensively studied, it is still unclear how the underlying structure evolution engenders their defining properties. Here we employ an electric biasing in-situ high-energy synchrotron X-ray diffraction technique to reveal the phase, domain texture, and lattice evolution in a high performance PbZrO 3 -based AFE material. During the reversible AFE-FE transition triggered by electric fields, the evolution of the superstructure for AFE pseudo-tetragonal and FE rhombohedral phase is found to display strong dependence on the angle with respect to the field direction. In contrast to previous prediction, it is found that there is no obvious domain reorientation in the AFE phase, when the system is far away from the AFE-FE transitions. The electric-field-induced FE rhombohedral phase exhibits an unusual microscopic behavior, distinguished from the normal one, presenting small changes in domain texture and lattice strain with electric field, and leading to a small piezoelectric response. The longitudinal, transverse, and volume strains estimated from the XRD peak profiles are well consistent with the macroscopic strain measurements. It is demonstrated that the large strain arises from the structural change associated with anisotropic lattice strain and highly preferential domain reorientation during the AFE-FE transitions. Finally, the AFE-FE switching sequence is constructed based on the present study, which provides a further understating of AFE materials.

36 MATERIALS SCIENCE↗

Similarity renormalization group evolution of chiral effective nucleon-nucleon potentials in the subtracted kernel method approach

Research Highlights: > We study the similarity renormalization group evolution of chiral NN potentials. > We evolve an effective potential derived using a subtractive renormalization scheme. > Unitarity of the SRG evolution is verified within the subtractive scheme. > High- and low-momentum components decouple for the SRG evolved potential. - Abstract: Methods based on Wilson's renormalization group have been successfully applied in the context of nuclear physics to analyze the scale dependence of effective nucleon-nucleon (NN) potentials, as well as to consistently integrate out the high-momentum components of phenomenological high-precision NN potentials in order to derive phase-shift equivalent softer forms, the so called V{sub low-k} potentials. An alternative renormalization group approach that has been applied in this context is the similarity renormalization group (SRG), which is based on a series of continuous unitary transformations that evolve hamiltonians with a cutoff on energy differences. In this work we study the SRG evolution of a leading order (LO) chiral effective NN potential in the {sup 1}S{sub 0} channel derived within the framework of the subtracted kernel method (SKM), a renormalization scheme based on a subtracted scattering equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time evolution of coupled spin systems in a generalized Wigner representation

Phase-space representations as given by Wigner functions are a powerful tool for representing the quantum state and characterizing its time evolution in the case of infinite-dimensional quantum systems and have been widely used in quantum optics and beyond. Continuous phase spaces have also been studied for finite-dimensional quantum systems such as spin systems. However, much less is known for finite-dimensional, coupled systems, and we present a complete theory of Wigner functions for this case. In particular, we provide a self-contained Wigner formalism for describing and predicting the time evolution of coupled spins which lends itself to visualizing the high-dimensional structure of multi-partite quantum states. We completely treat the case of an arbitrary number of coupled spins 1∕2, thereby establishing the equation of motion using Wigner functions. The explicit form of the time evolution is then calculated for up to three spins 1∕2. The underlying physical principles of our Wigner representations for coupled spin systems are illustrated with multiple examples which are easily translatable to other experimental scenarios.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrable nonlinear evolution of the qubit

Highlights: •We study the nonlinear generalization of the von Neumann equation. •We discuss the nonlinear von Neumann equation for the qubit states. •We analyze solutions to the Riccati system corresponding to evolution of a qubit. -- Abstract: The nonlinear generalization of the von Neumann equation is studied. The global version of this equation preserves convexity of the space of states. The particular case of the evolution of pure states refers to the nonlinear Schrödinger equation discovered by Gisin. The concrete realization of the nonlinear von Neumann equation is investigated in detail for the density matrix representing the qubit states. Such equation reduces to the integrable classical Riccati system of nonlinear ordinary differential equations. An interesting property of the nonlinear dynamics described by this system is the global asymptotical stability of stationary solutions related to evolution from mixed states to pure states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The dynamic evolution of swelling in nickel concentrated solid solution alloys through in situ property monitoring

Defects and microstructural features spanning the atomic level to the microscale play deterministic roles in the expressed properties of materials. Yet studies of material evolution in response to environmental stimuli most often correlate resulting performance with one dominant microstructural feature only. In this work, the dynamic evolution of swelling in a series of Ni-based concentrated solid solution alloys under high-temperature irradiation exposure is observed using continuous, in situ measurements of thermoelastic properties in bulk specimens. Unlike traditional evaluation techniques which account only for volumetric porosity identified using electron microscopy, direct property evaluation provides an integrated response across all defect length scales. In particular, the evolution in elastic properties during swelling is found to depend significantly on the entire size spectrum of defects, from the nano- to meso-scales, some of which are not resolvable in imaging. Observed changes in thermal transport properties depend sensitively on the partitioning of electronic and lattice thermal conductivity. This emerging class of in situ experiments, which directly measure integrated performance in relevant conditions, provides unique insight into material dynamics otherwise unavailable using traditional methods.

36 MATERIALS SCIENCE↗

Thermally-Induced morphological evolution of spherical silica nanoparticles using in-operando X-ray scattering measurements

The assembly and morphology of pores determine thermodynamic, flow and reactive properties of confined fluids. Yet, there is a limited understanding of how pore architectures dynamically develop in engineered and natural materials. To develop a calibrated understanding of fluid properties in confinement, the synthesis of architected materials has been proposed. The design of geo-architected materials has to be informed by the dynamic evolution of the morphology in response to thermal or chemical events. Here, we probe thermally induced morphological evolution of spherical silica nanoparticles 220 ± 30 nm in diameter using in-operando Ultra-Small and Small Angle X-Ray Scattering measurements. The calcination experiments demonstrated that at temperatures up to 600 °C the pore radii remained in the range of 2.15 nm–2.35 nm and the particle diameters in the range of 220 ± 30 nm. Sintering these calcined silica nanoparticles to temperatures up to 1050 °C reduced the pore size from 2.2 ± 0.1 nm to ~1.8–0.2 nm. These changes corresponded to the formation of siloxane (Si-O-Si) bridges resulting from dehydroxylation. The characteristic pore radius of sintered particles was also confirmed by N 2 adsorption measurements. These studies represent the use of non-invasive dynamic characterization methods such as X-ray scattering to elucidate thermally induced morphological evolution in architected siliceous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-induced radical generation and evolution to a self-sustaining flame

Images and emission spectra of sparks produced by laser-induced breakdown of methane and propane air mixtures were investigated with a high degree of spatial and temporal resolution. The laser-induced breakdown was generated by focusing a 532-nm nanosecond pulse from a Q-switched Nd:YAG laser. The data were collected using an intensified high-speed camera and a single/multi-fiber Cassegrain optics system coupled to an ICCD spectrometer. Emission spectra of OH{sup *}, CN{sup *}, CH{sup *}, and C{sup *}{sub 2} radicals were also collected using spectra boxes. The results provided information about the different stages of the laser-induced breakdown, with a specific focus on the transition from a flame kernel to a self-sustaining flame. The plasma shape and emission spectrum were very reproducible. The differences in the size of the flame kernel and the evolution of the radical emissions were analyzed for mixtures that fired or misfired. The impact of the level of radicals in the flame kernel was a critical parameter for the firing process, starting around 1 {mu}s after the laser-induced breakdown. The transition from plasma cooling to the classical chemical reactions in the combustion zone was analyzed. Even though the flame kernel size was directly linked to the spark energy, this was not a key parameter toward evolution to a self-sustaining flame. The Taylor blast wave theory was used to plot the location of the shock based on the evolution of the flame kernel size. The location was calculated using a laser-supported detonation model. A very good correlation was observed with the hot gas ignition process. Our results allowed us to obtain information about the process leading to firing or misfiring for similar environments, resulting in a better understanding of the laser breakdown phenomena and the means of utilizing this technique in an industrial context. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗