SEARCH · Engineering Papers

Results for “equation of fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Development of a CFD Code for Analysis of Fluid Dynamic Forces in Seals

The aim is to develop a 3-D computational fluid dynamics (CFD) code for the analysis of fluid flow in cylindrical seals and evaluation of the dynamic forces on the seals. This code is expected to serve as a scientific tool for detailed flow analysis as well as a check for the accuracy of the 2D industrial codes. The features necessary in the CFD code are outlined. The initial focus was to develop or modify and implement new techniques and physical models. These include collocated grid formulation, rotating coordinate frames and moving grid formulation. Other advanced numerical techniques include higher order spatial and temporal differencing and an efficient linear equation solver. These techniques were implemented in a 2D flow solver for initial testing. Several benchmark test cases were computed using the 2D code, and the results of these were compared to analytical solutions or experimental data to check the accuracy. Tests presented here include planar wedge flow, flow due to an enclosed rotor, and flow in a 2D seal with a whirling rotor. Comparisons between numerical and experimental results for an annular seal and a 7-cavity labyrinth seal are also included.

Athavale, Mahesh M.↗

NASA NTRS2015

Lattice Boltzmann Method for Spacecraft Propellant Slosh Simulation

A scalable computational approach to the simulation of propellant tank sloshing dynamics in microgravity is presented. In this work, we use the lattice Boltzmann equation (LBE) to approximate the behavior of two-phase, single-component isothermal flows at very low Bond numbers. Through the use of a non-ideal gas equation of state and a modified multiple relaxation time (MRT) collision operator, the proposed method can simulate thermodynamically consistent phase transitions at temperatures and density ratios consistent with typical spacecraft cryogenic propellants, for example, liquid oxygen. Determination of the tank forces and moments relies upon the global momentum conservation of the fluid domain, and a parametric wall wetting model allows tuning of the free surface contact angle. Development of the interface is implicit and no interface tracking approach is required. Numerical examples illustrate the method's application to predicting bulk fluid motion including lateral propellant slosh in low-g conditions.

Orr, Jeb S.↗

DOE OSTI2022

Droplet formation simulation using mixed finite elements

Droplet formation happens in finite time due to the surface tension force. The linear stability analysis is useful to estimate the size of a droplet but fails to approximate the shape of the droplet. This is due to a highly nonlinear flow description near the point where the first pinch-off happens. A one-dimensional axisymmetric mathematical model was first developed by Eggers and Dupont [“Drop formation in a one-dimensional approximation of the Navier–Stokes equation,” J. Fluid Mech. 262, 205–221 (1994)] using asymptotic analysis. This asymptotic approach to the Navier–Stokes equations leads to a universal scaling explaining the self-similar nature of the solution. Numerical models for the one-dimensional model were developed using the finite difference [Eggers and Dupont, “Drop formation in a one-dimensional approximation of the Navier–Stokes equation,” J. Fluid Mech. 262, 205–221 (1994)] and finite element method [Ambravaneswaran et al., “Drop formation from a capillary tube: Comparison of one-dimensional and two-dimensional analyses and occurrence of satellite drops,” Phys. Fluids 14, 2606–2621 (2002)]. The focus of this study is to provide a robust computational model for one-dimensional axisymmetric droplet formation using the Portable, Extensible Toolkit for Scientific Computation. The code is verified using the Method of Manufactured Solutions and validated using previous experimental studies done by Zhang and Basaran [“An experimental study of dynamics of drop formation,” Phys. Fluids 7, 1184–1203 (1995)]. The present model is used for simulating pendant drops of water, glycerol, and paraffin wax, with an aspiration of extending the application to simulate more complex pinch-off phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2009

Multifluid Block-Adaptive-Tree Solar Wind Roe-Type Upwind Scheme: Magnetospheric Composition and Dynamics During Geomagnetic Storms-Initial Results

The magnetosphere contains a significant amount of ionospheric O+, particularly during geomagnetically active times. The presence of ionospheric plasma in the magnetosphere has a notable impact on magnetospheric composition and processes. We present a new multifluid MHD version of the Block-Adaptive-Tree Solar wind Roe-type Upwind Scheme model of the magnetosphere to track the fate and consequences of ionospheric outflow. The multifluid MHD equations are presented as are the novel techniques for overcoming the formidable challenges associated with solving them. Our new model is then applied to the May 4, 1998 and March 31, 2001 geomagnetic storms. The results are juxtaposed with traditional single-fluid MHD and multispecies MHD simulations from a previous study, thereby allowing us to assess the benefits of using a more complex model with additional physics. We find that our multifluid MHD model (with outflow) gives comparable results to the multispecies MHD model (with outflow), including a more strongly negative Dst, reduced CPCP, and a drastically improved magnetic field at geosynchronous orbit, as compared to single-fluid MHD with no outflow. Significant differences in composition and magnetic field are found between the multispecies and multifluid approach further away from the Earth. We further demonstrate the ability to explore pressure and bulk velocity differences between H+ and O+, which is not possible when utilizing the other techniques considered

Glocer, A.↗

DOE OSTI2022

Modelling general-relativistic plasmas with collisionless moments and dissipative two-fluid magnetohydrodynamics

ABSTRACT Relativistic plasmas are central to the study of black hole accretion, jet physics, neutron star mergers, and compact object magnetospheres. Despite the need to accurately capture the dynamics of these plasmas and the implications for relativistic transients, their fluid modelling is typically done using a number of (overly) simplifying assumptions, which do not hold in general. This is especially true when the mean free path in the plasma is large compared to the system size, and kinetic effects start to become important. Going beyond common approaches used in the literature, we describe a fully relativistic covariant 14-moment based two-fluid system appropriate for the study of electron–ion or electron–positron plasmas. This generalized Israel-Stewart-like system of equations of motion is obtained directly from the relativistic Boltzmann–Vlasov equation. This new formulation can account for non-ideal effects, such as anisotropic pressures and heat fluxes, not present in previous formulations of two-fluid magnetohydrodynamics. We show that a relativistic two-fluid plasma can be recast as a single fluid coupled to electromagnetic fields with (potentially large) out-of-equilibrium corrections. We keep all electron degrees of freedom, which provide self-consistent evolution equations for electron temperature and momentum. The out-of-equilibrium corrections take the form of a collisional 14-moment closure previously described in the context of viscous single fluids. The equations outlined in this paper are able to capture the full two-fluid character of collisionless plasmas found in black hole accretion and flaring processes around compact objects, as well Braginskii-like two-fluid magnetohydrodynamics applicable to weakly collisional plasmas inside accretion discs.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1984

On the proper Mach number and ratio of specific heats for modeling the Venus bow shock

Observational data from the Pioneer Venus Orbiter are used to investigate the physical characteristics of the Venus bow shock, and to explore some general issues in the numerical simulation of collisionless shocks. It is found that since equations from gas-dynamic (GD) models of the Venus shock cannot in general replace MHD equations, it is not immediately obvious what the optimum way is to describe the desired MHD situation with a GD code. Test case analysis shows that for quasi-perpendicular shocks it is safest to use the magnetospheric Mach number as an input to the GD code. It is also shown that when comparing GD predicted temperatures with MHD predicted temperatures total energy should be compared since the magnetic energy density provides a significant fraction of the internal energy of the MHD fluid for typical solar wind parameters. Some conclusions are also offered on the properties of the terrestrial shock.

Tatrallyay, M.↗

NASA NTRS1992

Workshop on Engineering Turbulence Modeling

Discussed here is the future direction of various levels of engineering turbulence modeling related to computational fluid dynamics (CFD) computations for propulsion. For each level of computation, there are a few turbulence models which represent the state-of-the-art for that level. However, it is important to know their capabilities as well as their deficiencies in order to help engineers select and implement the appropriate models in their real world engineering calculations. This will also help turbulence modelers perceive the future directions for improving turbulence models. The focus is on one-point closure models (i.e., from algebraic models to higher order moment closure schemes and partial differential equation methods) which can be applied to CFD computations. However, other schemes helpful in developing one-point closure models, are also discussed.

Povinelli, Louis A.↗

DOE OSTI2021

Direct numerical simulation of supercritical oxy-methane mixing layers with CO 2 substituted counterparts

Direct numerical simulations (DNS) of temporally developing, three dimensional, CH 4 /CO 2 , CH 4 /O 2 and CO 2 /O 2 mixing layers, are conducted at a supercritical pressure of 300 atm. To effectively model the supercritical regime, the employed formulation includes the compressible form of the governing equations, the cubic Peng-Robinson equation of state and a generalized formulation for heat and mass flux vectors derived from non-equilibrium thermodynamics and fluctuation theory. A linear inviscid stability analysis is also performed for each case, to determine its most unstable wavelength. Flow visualizations reveal the presence of high density gradient magnitude regions for all three mixing layers, with conditional averages indicating increased presence of heavier fluid species within these regions. No significant departures are observed from perfect gas behavior, with compressibility factors very close to unity for all three mixing cases. Applicability of presumed probability density function methods (PDF) is examined for the three supercritical mixing layers. An a priori analysis is also conducted to investigate various simplifying assumptions employed in modeling various subgrid scale (SGS) flux models. Two additional terms are identified in the large eddy simulations (LES) equations, the gradient of SGS contribution of pressure in the momentum equation and the gradient of SGS contribution of heat flux in energy equation, whose magnitudes are similar and comparable with their respective resolved terms. The performance of the scale similarity model to represent these additional terms is investigated. Lastly, the performance of Smagorinsky, gradient and scale similarity models are also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

A Transported Livengood–Wu Integral Model for Knock Prediction in Computational Fluid Dynamics Simulation

This work describes the development of a transported Livengood–Wu (L–W) integral model for computational fluid dynamics (CFD) simulation to predict autoignition and engine knock tendency. The currently employed L–W integral model considers both single-stage and two-stage ignition processes, thus can be generally applied to different fuels such as paraffin, olefin, aromatics, and alcohol. The model implementation is first validated in simulations of homogeneous charge compression ignition (HCCI) combustion for three different fuels, showing good accuracy in prediction of autoignition timing for fuels with either single-stage or two-stage ignition characteristics. Then, the L–W integral model is coupled with G-equation model to indicate end-gas autoignition and knock tendency in CFD simulations of a direct-injection spark-ignition engine. This modeling approach is about 10 times more efficient than the ones that based on detailed chemistry calculation and pressure oscillation analysis. Two fuels with same Research Octane Number (RON) but different octane sensitivity are studied, namely, Co-Optima alkylate and Co-Optima E30. Feed-forward neural network model in conjunction with multivariable minimization technique is used to generate fuel surrogates with targets of matched RON, octane sensitivity, and ethanol content. The CFD model is validated against experimental data in terms of pressure traces and heat release rate for both fuels under a wide range of operating conditions. The knock tendency—indicated by the fuel energy contained in the autoignited region—of the two fuels at different load conditions correlates well with the experimental results and the fuel octane sensitivity, implying the current knock modeling approach can capture the octane sensitivity effect and can be applied to further investigation on composition of octane sensitivity.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2023

Semiconductor Nanostructures by Scientific Design (Final Technical Report)

We developed and used quantum simulation techniques to predict structural, electronic, optical and thermal properties affecting the scientific design of semiconductor nanostructures. We focused on the study of surfaces and interfaces at the nanoscale, in particular embedding and solvation of semiconductor nanoparticles, and provided a microscopic description of nanostructured materials in realistic environments, directly comparable with experimental conditions. We addressed three major problems: (i) the design of realistic structural models of integrated nanostructures, e.g. quantum dots embedded in solid matrices and nanostructures immersed in fluids; (ii) the development of efficient and accurate calculations to describe the excited state properties of nanostructures, beyond standard Density Functional Theory, so as to understand and predict electronic properties involved in renewable energy applications, for example solar conversion devices. In particular we developed and used methods based on a many body perturbation theory. (iii) the development of calculations of heat transport properties of nanostructured materials, for thermoelectric applications, including predictive calculations of thermal and electrical conductivity and of Seebeck coefficients. Specifically, we developed and used methods based on the Boltzmann transport equation and molecular dynamics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

NASA NTRS1975

Flutter of articulated pipes at finite amplitude

Previous studies of the behavior of pipes conveying fluid have assumed that the fluid velocity relative to the pipe is a known quantity and is unaffected by the motion of the pipe. This approach eliminates the need to find the flow equations of motion, and is adequate for infinitesimal transverse amplitudes of motion of the pipe system, but is incapable of predicting what will be the effect of larger amplitudes. This last shortcoming may be of importance when flow velocities are near critical velocities, that is, velocities at which the system begins to flutter. It is the purpose of the present study to investigate in greater detail the dynamic behavior of pipes in the vicinity of critical velocities.

Rousselet, J.↗

NASA NTRS1995

TADS: A CFD-based turbomachinery and analysis design system with GUI. Volume 2: User's manual

The primary objective of this study was the development of a computational fluid dynamics (CFD) based turbomachinery airfoil analysis and design system, controlled by a graphical user interface (GUI). The computer codes resulting from this effort are referred to as the Turbomachinery Analysis and Design System (TADS). This document is intended to serve as a user's manual for the computer programs which comprise the TADS system. TADS couples a throughflow solver (ADPAC) with a quasi-3D blade-to-blade solver (RVCQ3D) in an interactive package. Throughflow analysis capability was developed in ADPAC through the addition of blade force and blockage terms to the governing equations. A GUI was developed to simplify user input and automate the many tasks required to perform turbomachinery analysis and design. The coupling of various programs was done in a way that alternative solvers or grid generators could be easily incorporated into the TADS framework.

Myers, R. A.↗

NASA NTRS2005

Numerical Simulation of Liquid Jet Atomization Including Turbulence Effects

This paper describes numerical implementation of a newly developed hybrid model, T-blob/T-TAB, into an existing computational fluid dynamics (CFD) program for primary and secondary breakup simulation of liquid jet atomization. This model extend two widely used models, the Kelvin-Helmholtz (KH) instability of Reitz (blob model) and the Taylor-Analogy-Breakup (TAB) secondary droplet breakup by O'Rourke and Amsden to include turbulence effects. In the primary breakup model, the level of the turbulence effect on the liquid breakup depends on the characteristic scales and the initial flow conditions. For the secondary breakup, an additional turbulence force acted on parent drops is modeled and integrated into the TAB governing equation. Several assessment studies are presented and the results indicate that the existing KH and TAB models tend to under-predict the product drop size and spray angle, while the current model provides superior results when compared with the measured data.

Trinh, Huu P.↗

NASA NTRS1987

A new approach to the effect of sound on vortex dynamics

Analytical results are presented on the effect of acoustic radiation on three-dimensional vortex motions in a homogeneous, slightly compressible, inviscid fluid. The flow is considered as linear and irrotational everywhere except inside a very thin cylindrical core region around the vortex filament. In the outside region, a velocity potential is introduced that must be multivalued, and it is shown how to compute this scalar potential if the motion of the vortex filament is prescribed. To find the motion of this singularity in an external potential flow, a variational principle involving a volume integral that must exclude the singular region is considered. A functional of the external potential and vortex filament position is obtained whose extrema give equations to determine the sought-after evolution. Thus, a generalization of the Biot-Savart law to flows with constant sound speed at low Mach number is obtained.

Lund, Fernando↗

DOE OSTI2025

Direct statistical simulation of the Lorenz96 system in model reduction approaches

Direct statistical simulation (DSS) of nonlinear dynamical systems bypasses the traditional route of accumulating statistics by lengthy direct numerical simulations by solving the equations that govern the statistics themselves. DSS suffers, however, from the curse of dimensionality as the statistics (such as correlations) generally have higher dimensions than the underlying dynamical variables. Here we investigate two approaches to reduce the dimensionality of DSS, illustrating each method with numerical experiments with the Lorenz96 dynamical system. The forms of DSS chosen here involve approximate closures at second and third order in the equal-time cumulants. We demonstrate significant reduction in computational effort that can be achieved without sacrificing the accuracy of DSS. The methods developed here can be applied to turbulent fluid and magnetohydrodynamical systems. Published by the American Physical Society 2025

Li, Kuan↗

NASA NTRS1984

Newton like: Minimal residual methods applied to transonic flow calculations

A computational technique for the solution of the full potential equation is presented. The method consists of outer and inner iterations. The outer iterate is based on a Newton like algorithm, and a preconditioned Minimal Residual method is used to seek an approximate solution of the system of linear equations arising at each inner iterate. The present iterative scheme is formulated so that the uncertainties and difficulties associated with many iterative techniques, namely the requirements of acceleration parameters and the treatment of additional boundary conditions for the intermediate variables, are eliminated. Numerical experiments based on the new method for transonic potential flows around the NACA 0012 airfoil at different Mach numbers and different angles of attack are presented, and these results are compared with those obtained by the Approximate Factorization technique. Extention to three dimensional flow calculations and application in finite element methods for fluid dynamics problems by the present method are also discussed. The Inexact Newton like method produces a smoother reduction in the residual norm, and the number of supersonic points and circulations are rapidly established as the number of iterations is increased.

Wong, Y. S.↗

NASA NTRS1985

Newton-like minimal residual methods applied to transonic flow calculations

Wong, Y. S.↗

NASA NTRS1985

Some recent advances in computational aerodynamics for helicopter applications

The growing application of computational aerodynamics to nonlinear helicopter problems is outlined, with particular emphasis on several recent quasi-two-dimensional examples that used the thin-layer Navier-Stokes equations and an eddy-viscosity model to approximate turbulence. Rotor blade section characteristics can now be calculated accurately over a wide range of transonic flow conditions. However, a finite-difference simulation of the complete flow field about a helicopter in forward flight is not currently feasible, despite the impressive progress that is being made in both two and three dimensions. The principal limitations are today's computer speeds and memories, algorithm and solution methods, grid generation, vortex modeling, structural and aerodynamic coupling, and a shortage of engineers who are skilled in both computational fluid dynamics and helicopter aerodynamics and dynamics.

Mccroskey, W. J.↗