Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Mixed Conducting Electrodes for Better AMTEC Cells

Electrode materials that exhibit mixed conductivity (that is, both electronic and ionic conductivity) have been investigated in a continuing effort to improve the performance of the alkali metal thermal-to-electric converter (AMTEC). These electrode materials are intended primarily for use on the cathode side of the sodium-ion-conducting solid electrolyte of a sodium-based AMTEC cell. They may also prove useful in sodium-sulfur batteries, which are under study for use in electric vehicles. An understanding of the roles played by the two types of conduction in the cathode of a sodium-based AMTEC cell is prerequisite to understanding the advantages afforded by these materials. In a sodium-based AMTEC cell, the anode face of an anode/solid-electrolyte/cathode sandwich is exposed to Na vapor at a suitable pressure. Upon making contact with the solid electrolyte on the anode side, Na atoms oxidize to form Na+ ions and electrons. Na+ ions then travel through the electrolyte to the cathode. Na+ ions leave the electrolyte at the cathode/electrolyte interface and are reduced by electrons that have been conducted through an external electrical load from the anode to the cathode. Once the Na+ ions have been reduced to Na atoms, they travel through the cathode to vaporize into a volume where the Na vapor pressure is much lower than it is on the anode side. Thus, the cathode design is subject to competing requirements to be thin enough to allow transport of sodium to the low-pressure side, yet thick enough to afford adequate electronic conductivity. The concept underlying the development of the present mixed conducting electrode materials is the following: The constraint on the thickness of the cathode can be eased by incorporating Na+ -ionconducting material to facilitate transport of sodium through the cathode in ionic form. At the same time, by virtue of the electronically conducting material mixed with the ionically conducting material, reduction of Na+ ions to Na atoms can take place throughout the thickness of the cathode. The net effect is to reduce the diffusion and flow resistance to sodium through the electrode while reducing the electronic resistance by providing shorter conduction paths for electrons. Reduced resistance to both sodium transport and electronic conductivity results in an increase in electric power output.

Ryan, Margaret↗

Polycaprolactone‐Based Zinc Ink for High Conductivity Transient Printed Electronics and Antennas

Abstract Distributed sensors and electronics can be used in agriculture to optimize crop management and improve environmental outcomes. Electronic devices in these outdoor spaces require medium to long range (>1m) wireless communication of data over several weeks or months, which in turn requires high conductivity (1 × 10 5 Sm −1 ) antennas. Printed bioinert or ecoresorbable conductors, comprising carbon, magnesium, or zinc fillers, typically exhibit conductivity on the order of 10–1000 Sm −1 and lifetimes from a few hours to a few days. A print‐based fabrication process for chemically treated zinc traces, which achieves conductivity of up to 6 × 10 5 Sm −1 is reported here. The ink formulation uses a non‐water‐soluble soil biodegradable polycaprolactone binder. The ink and printing processes reported here led to stable conductive traces that are used in ultra high frequency radio frequency identification (UHF‐RFID) folded dipole antennas operating at 915 MHz. The conductivity of the printed traces is maintained for over 70 days in ambient environments when traces are protected by a biodegradable beeswax encapsulation layer.

Baumbauer, Carol L.↗

Manipulating I V Characteristics of a Molecular Switch with Chemical Modifications

We present a study of the effects of chemical modifications on the electron transport properties of the azobenzene molecule, which has been proposed as a component of a light-driven molecular switch. This molecule has two stable conformations (cis and trans) in the electronic ground state, with considerable differences in conductance. The electron transport properties were calculated using first-principles methods combining nonequilibrium Green s function techniques with density functional theory. Chemical modifications of the azobenzene consist of incorporation of electron-donating and electron-withdrawing groups in meta and ortho positions with respect to the azo group. The results show that the transport properties in electronic devices at the molecular level can be manipulated, enhanced, or suppressed by a careful consideration of the effects of chemical modification, and such modifications become crucial in optimizing the electron transport properties of chemical structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlocal effects on thermal transport in hydrodynamic simulations of unmagnetized MagLIF-relevant gaspipes on NIF

We present simulations of heat flow relevant to gaspipe experiments on the National Ignition Facility to investigate kinetic effects on transport phenomena. D 2 and neopentane (C 5 H 12 ) filled targets are used to study the laser preheat stage of a MagLIF scheme where an axial magnetic field is sometimes applied to the target. Simulations were done with the radiation-MHD code HYDRA with a collision-dominated fluid model and the SNB nonlocal electron thermal conduction model. Using the SNB model to evolve the electron temperature increased the heat front propagation of neopentane gas targets compared to a local model by limiting radial heat flow. This increases electron temperature near the axis, which decreases laser absorption. We find that the effect of heat flow models on temperature profiles and laser propagation is modest. Beyond the SNB model, we utilize HYDRA to initialize plasma conditions for the Vlasov–Fokker–Planck K2 code. We run K2 until a quasi-steady state is reached and examine the impact of kinetic effects on heat transport. Although axial heat flow is well predicted by fluid models, the fluid model consistently overpredicts radial heat flow up to 150% in regions with the largest temperature gradient of D 2 filled gaspipes. On the other hand, the SNB nonlocal electron conduction model is found to be adequate for capturing kinetic heat flow in gaspipes.

Lau, Ryan Y. [Univ. of Colorado, Boulder, CO (Unit↗

Magnetosphere–Ionosphere Coupling of Precipitating Electrons and Ionospheric Conductance

Modeling of electrodynamic coupling between the magnetosphere and ionosphere depends on accurate specification of ionospheric conductances produced by auroral precipitation. Magnetospheric models determine the plasma properties on magnetic field lines connected to the auroral ionosphere, but the precipitation of energetic particles into the ionosphere is the result of a two-step process. The first step is the initiation of electron precipitation into both magnetically conjugate points from Earth’s plasma sheet via wave–particle interactions. The second step consists of the multiple atmospheric reflections of electrons at the two magnetically conjugate points.

George V Khazanov↗

Temperature dependent behavior of thermal conductivity of sub-5 nm Ir film: Defect-electron scattering quantified by residual thermal resistivity

By studying the temperature-dependent behavior (300 K down to 43 K) of electron thermal conductivity (κ) in a 3.2 nm-thin Ir film, we quantify the extremely confined defect-electron scatterings and isolate the intrinsic phonon-electron scattering that is shared by the bulk Ir. At low temperatures below 50 K, κ of the film has almost two orders of magnitude reduction from that of bulk Ir. The film has ∂κ/∂T > 0, while the bulk Ir has ∂κ/∂T < 0. We introduce a unified thermal resistivity (Θ = T/κ) to interpret these completely different κ ∼ T relations. It is found that the film and the bulk Ir share a very similar Θ ∼ T trend, while they have a different residual part (Θ{sub 0}) at 0 K limit: Θ{sub 0} ∼ 0 for the bulk Ir, and Θ{sub 0} = 5.5 m·K{sup 2}/W for the film. The Ir film and the bulk Ir have very close ∂Θ/∂T (75–290 K): 6.33 × 10{sup −3} m K/W for the film and 7.62 × 10{sup −3} m K/W for the bulk Ir. This strongly confirms the similar phonon-electron scattering in them. Therefore, the residual thermal resistivity provides an unprecedented way to quantitatively evaluating defect-electron scattering (Θ{sub 0}) in heat conduction. Moreover, the interfacial thermal conductance across the grain boundaries is found larger than that of Al/Cu interface, and its value is proportional to temperature, largely due to the electron's specific heat. A unified interfacial thermal conductance is also defined and firmly proves this relation. Additionally, the electron reflection coefficient is found to be large (88%) and almost temperature independent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-thermal reconnection of significance to space and astrophysics

Magnetic reconnection processes that can be excited in collisionless plasma regimes are of interest to space and astrophysics to the extent that the layers in which reconnection takes place are not rendered unrealistically small by their unfavorable dependence on relevant macroscopic distances. The equations describing new modes producing magnetic reconnection over relatively small but significant distances, unlike tearing types of mode, even when dealing with large macroscopic scale lengths, are given. The considered modes are associated with a finite electron temperature gradient and have a phase velocity in the direction of the electron diamagnetic velocity that can reverse to the opposite direction as relevant parameters are varied over a relatively wide range. The electron temperature perturbation has a primary role in the relevant theory. In particular, when referring to regimes in which the longitudinal (to the magnetic field) electron thermal conductivity is relatively large, the electron temperature perturbation becomes singular if the ratio of the transverse to the longitudinal electron thermal conductivity becomes negligible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermoelectric properties of Al doped Mg{sub 2}Si material

In the present paper we have calculated thermoelectric properties of Al doped Mg{sub 2}Si material (Mg{sub 2−x}Al{sub x}Si, x=0.06) using Pseudo potential plane wave method based on DFT and Semi classical Boltzmann theory. The calculations showed n-type conduction, indicating that the electrical conduction are due to electron. The electrical conductivity increasing with increasing temperature and the negative value of Seebeck Coefficient also show that the conduction is due to electron. The thermal conductivity was increased slightly by Al doping with increasing temperature due to the much larger contribution of lattice thermal conductivity over electronic thermal conductivity.

36 MATERIALS SCIENCE↗

Flow of a plasma of multielectron elements along a magnetic field

An analysis is made of a flow of Ar plasma imitating plasma flows in ion separation systems such as systems for processing spent nuclear fuel or ion cyclotron resonance isotope separation systems. It is found that the electron temperature is equalized along the flow by electron heat conduction. When the electron temperature is not too low (T{sub e} {>=} E{sub ion}/10, where E{sub ion} is the ionization energy), multicharged ions are intensely produced along the entire flow. It is shown that this process is accompanied by the flow acceleration. Difficulties in describing a supersonic flow by hydrodynamic equations are pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High T{sub g} and fast curing epoxy-based anisotropic conductive paste for electronic packaging

Herein, our main objective is to prepare the fast curing epoxy system with high glass transition temperature (T{sub g}) by incorporating the multifunctional epoxy resin into the mixture of diglycidyl ether of bisphenol A (DGEBA) as a major epoxy component and aromatic diamine as a hardener. Furthermore, the curing behavior as well as thermal and thermomechanical properties were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and thermomechanical analysis (TMA). It was found that T{sub g} obtained from tan δ of DGEBA/aromatic diamine system increased from 100 °C to 205 °C with the presence of 30 percentage by weight of multifunctional epoxy resin. Additionally, the isothermal DSC results showed that the multifunctional epoxy resin can accelerate the curing reaction of DGEBA/aromatic diamine system. Namely, a high degree of curing (∼90%) was achieved after a few minutes of curing at low temperature of 130 °C, owing to a large number of epoxy ring of multifunctional epoxy resin towards the active hydrogen atoms of aromatic diamine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring the air plasma with a double laser pulse

We present a comprehensive model of plasma dynamics that enables a detailed understanding of the ways the air plasma induced in the atmosphere in the wake of a laser-induced filament can be controlled by an additional laser pulse. Our model self-consistently integrates plasma-kinetic, Navier-Stokes, electron heat conduction, and electron-vibration energy transfer equations, serving to reveal laser-plasma interaction regimes where the plasma lifetime can be substantially increased through an efficient control over plasma temperature, as well as suppression of attachment and recombination processes. The model is used to quantify the limitations on the length of uniform laser-filament heating due to the self-defocusing of laser radiation by the radial profile of electron density. The envisaged applications include sustaining plasma guides for long-distance transmission of microwaves, standoff detection of impurities and potentially hazardous agents, as well as lightning control and protection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Long-lived laser-induced microwave plasma guides in the atmosphere: Self-consistent plasma-dynamic analysis and numerical simulations

A detailed model of plasma dynamics, which self-consistently integrates plasma-kinetic, Navier-Stokes, electron heat conduction, and electron-vibration energy transfer equations, is used to quantify the limitations on the lifetime of microwave plasma waveguides induced in the atmosphere through filamentation with high-intensity ultrashort laser pulses further sustained by long laser pulses. We demonstrate that a near-infrared or midinfrared laser pulse can tailor plasma decay in the wake of a filament, efficiently suppressing, through electron temperature increase, the attachment of electrons to neutral species and dissociative recombination, thus substantially increasing the plasma-guide lifetime and facilitating long-distance transmission of microwaves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermoelectric characteristic of the rough InN/GaN core-shell nanowires

An analysis to model the thermoelectric (TE) effects of the rough InN/GaN core-shell nanowires (NWs) with wire diameter ranging from 25 nm to 100 nm is proposed. The elastic continuum model is employed to calculate the phonon dispersion relation curves and the related phonon group velocity. Within the framework of Boltzmann transport equations and relaxation time approximation, the electrical conductivity, Seebeck coefficient, electronic thermal conductivity, and the lattice thermal conductivity is obtained. Simulation results indicate that TE properties of the rough InN/GaN core-shell NWs are strongly affected by the surface roughness and the diameter of NWs. The optimized condition of the proposed rough InN/GaN core-shell TE NWs is studied in this paper and the highest ZT obtained in the calculation is 0.8598 at 300 K and 1.713 at 1000 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗