Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effective diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Atomic structure and defect energetics of LiCoO{sub 2} grain boundary

Highlights: • We model the sample grain boundary of LiCoO2, one of important Li cathode materials. • Rigid body translation was found the asymmetric GB is more stable than symmetric GB. • The vacancy formation energy of Li and O was estimated with first principles calculations. • This model boundary can help to find a new dopant to improve Li diffusions. - Abstract: An atomic structure of LiCoO{sub 2} model grain boundary, Σ2 [1120](1102), is introduced and grain boundary energies with rigid body translations are investigated systematically to find the most stable interface structures. It is found that the coordinated structures of Co and O in the vicinity of grain boundary are strongly related to grain boundary energy. Examining nonstoichiometry at grain boundary, the defect energetics of Li and O site at grain boundary are estimated. In addition, the effect of grain boundary on Li diffusion is investigated to calculate Li diffusion across grain boundary.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Sensitivity of the interpretation of the experimental ion thermal diffusivity to the determination of the ion conductive heat flux

A moments equation formalism for the interpretation of the experimental ion thermal diffusivity from experimental data is used to determine the radial ion thermal conduction flux that must be used to interpret the measured data. It is shown that the total ion energy flux must be corrected for thermal and rotational energy convection, for the work done by the flowing plasma against the pressure and viscosity, and for ion orbit loss of particles and energy, and expressions are presented for these corrections. Each of these factors is shown to have a significant effect on the interpreted ion thermal diffusivity in a representative DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Impact of the Out‐Of‐Plane Flow Shear on Magnetic Reconnection at the Flanks of Earth's Magnetopause

Abstract Magnetic reconnection changes the magnetic field topology and facilitates the energy and particle exchange at magnetospheric boundaries such as the Earth's magnetopause. The flow shear perpendicular to the reconnecting plane prevails at the flank magnetopause under southward interplanetary magnetic field conditions. However, the effect of the out‐of‐plane flow shear on asymmetric reconnection is an open question. In this study, we utilize kinetic simulations to investigate the impact of the out‐of‐plane flow shear on asymmetric reconnection. By systematically varying the flow shear strength, we analyze the flow shear effects on the reconnection rate, the diffusion region structure, and the energy conversion rate. We find that the reconnection rate increases with the upstream out‐of‐plane flow shear, and for the same upstream conditions, it is higher at the dusk side than at the dawn side. The diffusion region is squeezed in the outflow direction due to magnetic pressure which is proportional to the square of the Alfvén Mach number of the shear flow. The out‐of‐plane flow shear increases the energy conversion rate , and for the same upstream conditions, the magnitude of is larger at the dusk side than at the dawn side. This study reveals that out‐of‐plane flow shear not only enhances the reconnection rate but also significantly boosts energy conversion, with more pronounced effects on the dusk‐side flank than on the dawn‐side flank. These insights pave the way for better understanding the solar wind‐magnetosphere interactions.

Liang, Haoming↗
DOE OSTI2016

An adaptive tau-leaping method for stochastic simulations of reaction-diffusion systems

Stochastic modelling is critical for studying many biochemical processes in a cell, in particular when some reacting species have low population numbers. For many such cellular processes the spatial distribution of the molecular species plays a key role. The evolution of spatially heterogeneous biochemical systems with some species in low amounts is accurately described by the mesoscopic model of the Reaction-Diffusion Master Equation. The Inhomogeneous Stochastic Simulation Algorithm provides an exact strategy to numerically solve this model, but it is computationally very expensive on realistic applications. We propose a novel adaptive time-stepping scheme for the tau-leaping method for approximating the solution of the Reaction-Diffusion Master Equation. This technique combines effective strategies for variable time-stepping with path preservation to reduce the computational cost, while maintaining the desired accuracy. The numerical tests on various examples arising in applications show the improved efficiency achieved by the new adaptive method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Transport Upscaling under Flow Heterogeneity and Matrix-Diffusion in Three-Dimensional Discrete Fracture Networks

For this work, we investigate the combined effects of network scale flow variability and retention due to matrix-diffusion on the scaling behavior of transport through fractured media. Two of the principal mechanisms controlling the transport of solutes through fractured low-permeability media are broad distributions of flow velocities and retention times in the solid matrix. We study the relative impact of these two processes under different initial conditions using a set of three-dimensional discrete fracture network simulations. We use these simulations to develop and calibrate an upscaled continuous time random walk (CTRW) approach for advective transport based on an Ornstein-Uhlenbeck model for the particle velocities that accounts for the fracture-matrix coupling using a compound Poisson process. This CTRW model can be conditioned on the initial solute distribution and allows to observe late-time scaling behavior at distances beyond what is feasible to observe using high-fidelity direct numerical simulations. We determine that the initial distribution of particles leads to marked differences in the persistent long-term scale behavior in the solute travel time distributions, even those undergoing retention due to matrix diffusion through implementation and analysis of the model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Temperature-dependent Spectral Emission of Hexagonal Boron Nitride Quantum Emitters on Conductive and Dielectric Substrates

We report a reduction in the linewidth and suppression of spectral diffusion of quantum emitters in hexagonal boron nitride supported on a conductive substrate. In this work, we observe a temperature-dependent reduction in the spectral emission linewidth for CVD-grown and exfoliated crystals on conductive ITO relative to those seen on silicon dioxide (SiO 2 ) substrates. We show that the inhomogeneous linewidth can be suppressed by 45% as a result of using a conductive substrate. We investigate the zero-phonon line profile at temperatures ranging from 4 to 300 K and decompose the effects of thermal broadening and spectral diffusion at each temperature by Voigt fitting. The temperature dependence of homogeneous and inhomogeneous components of the broadening is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

Electrically active centers formed in silicon during the high-temperature diffusion of boron and aluminum

The parameters of electrically active centers formed during the high-temperature diffusion of boron and aluminum into silicon in various media are studied by the Hall method and capacitance spectroscopy. It is found that the variation in the resistivity of the n base of the structures with p-n junctions fabricated in the study is controlled by the formation of three donor levels Q1, E4, and Q3 with the energies E{sub c} - 0.31, E{sub c} - 0.27, and E{sub c} - 0.16 eV. Diffusion in a chlorine-containing atmosphere introduces only a single level E4, but its concentration is 2.5 times lower, compared with diffusion in air. The values of the ionization energy of the Q3 level, measured under equilibrium (Hall effect) and nonequilibrium (capacitance spectroscopy) conditions, almost coincide. The deepest level E1 with an energy of E{sub c} - 0.54 eV, formed upon diffusion in both media, has no effect on the resistivity in the n base of the structures.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Plasma rotation and NTM onset driven by central EC deposition in TCV tokamak

The effects of the central electron cyclotron heating (ECH) and current drive (ECCD) on the spontaneous plasma rotation and on the presence of Tearing Modes (TM), observed in the TCV tokamak[1], were recently investigated as an interplay between the toroidal velocity and NTM onset in absence of sawteeth, ELMs and error fields [2–3]. In a set of reproducible TCV discharges (I{sub p}∼ −150 kA, B{sub t}∼ −1.4 T, ne,{sub av∼} 1.5 10{sup 19} m{sup −3}, T{sub e}∼ 3 keV and T{sub i}∼0.25 keV, q{sub 95}∼5.8) with both pure EC heating and current drive the cnt-Ip toroidal velocity was observed to be reduced with subsequent co-Ip appearance of 3/2 and 2/1 modes during the ramp up EC phases. The understanding of the capability of the on-axis EC power to modify the rotation profiles before and after the TM onset and of the sudden disappearance of 3/2 mode when 2/1 starts is the main purpose of this work. The velocity profile modifications are due to a direct effect of the EC absorbed power and also related to some variation of the perpendicular diffusion of the toroidal momentum and to magnetic braking effects of the kind of neoclassical toroidal viscosity (NTV) due to the NTM resonant field perturbations associated to the presence of TM. Numerical investigations are performed using a 1D toroidal momentum balance equation including contributions by external sources, as EC power, and NTV torques. Furthermore, the combined evolution of the 3/2 and 2/1 modes requires considering also coupling effects included in a generalized Rutherford equation for the modelling of the TM time growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2012

Thickness limitations in carbon nanotube reinforced silicon nitride coatings synthesized by vapor infiltration

Chemical vapor infiltration is a convenient method for synthesizing carbon nanotube (CNT)-reinforced ceramic coatings. The thickness over which infiltration is relatively uniform is limited by gas phase diffusion in the pore structure. These effects were investigated in two types of silicon nitride matrix composites. With CNTs that were distributed uniformly on the substrate surface dense coatings were limited to thicknesses of several microns. With dual structured CNT arrays produced by photolithography coatings up to 400 gm thick were obtained with minimal residual porosity. Gas transport into these dual structured materials was facilitated by creating micron sized channels between "CNT pillars" (i.e. each pillar consisted of a large number of individual CNTs). The experimental results are consistent with basic comparisons between the rates of gas diffusion and silicon nitride growth in porous structures. This analysis also provides a general insight into optimizing infiltration conditions during the fabrication of thick CNT-reinforced composite coatings. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

carbon nanotubes↗
DOE OSTI2021

Taylor dispersion in osmotically driven laminar flows in phloem

Sucrose is among the main products of photosynthesis that are deemed necessary for plant growth and survival. It is produced in the mesophyll cells of leaves and translocated to different parts of the plant through the phloem. Progress in understanding this transport process remains fraught with experimental difficulties, thereby prompting interest in theoretical approaches and laboratory studies. The Münch pressure and mass flow model is one of the accepted hypotheses describing the physics of sucrose transport in the phloem. It is based on osmosis creating an energy potential difference between the source and the sink. The flow responding to this energy potential is assumed laminar and described by the Hagen–Poiseuille equation. This study revisits such osmotically driven flows in tubes with membrane walls by including the effects of Taylor dispersion on mass transport. This effect has been overlooked in phloem flow studies. Taylor dispersion can increase the effective transport of solutes by increasing the apparent diffusion coefficient. It is shown that, in addition to the conventional diffusive correction derived for impermeable tube walls, a new adjustment to the mean advective terms arises because of osmotic effects. Because the molecular Schmidt number is very large for sucrose in water, the sucrose front speed and travel times have a direct dependence on the Péclet number for different ranges of the Münch number. Fially, this study establishes upper limits on expected Taylor dispersion enhancement of sucrose transport.

42 ENGINEERING↗
DOE OSTI2015

Contribution of radicals and ions in catalyzed growth of single-walled carbon nanotubes from low-temperature plasmas

The growth kinetics of single-walled carbon nanotubes (SWCNTs) in a low-temperature, low-pressure reactive plasma is investigated using a multiscale numerical simulation, including the plasma sheath and surface diffusion modules. The plasma-related effects on the characteristics of SWCNT growth are studied. It is found that in the presence of reactive radicals in addition to energetic ions inside the plasma sheath area, the effective carbon flux, and the growth rate of SWCNT increase. It is shown that the concentration of atomic hydrogen and hydrocarbon radicals in the plasma plays an important role in the SWCNT growth. The effect of the effective carbon flux on the SWCNT growth rate is quantified. The dependence of the growth parameters on the substrate temperature is also investigated. The effects of the plasma sheath parameters on the growth parameters are different in low- and high-substrate temperature regimes. The optimum substrate temperature and applied DC bias are estimated to maximize the growth rate of the single-walled carbon nanotubes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Impact of Soret effect on hydrogen and helium retention in PFC tungsten under ELM-like conditions

Abstract In our previous work, we have demonstrated using nonequilibrium molecular-dynamics simulations that the fluxes of helium and self-interstitial atoms in the presence of a thermal gradient in tungsten are directed opposite to the heat flux, indicating that species transport is governed by a Soret effect, namely, thermal-gradient-driven diffusion, characterized by a negative heat of transport that drives species transport uphill, i.e. from the cooler to the hot regions of the tungsten sample. In this work, the findings of our thermal and species transport analysis have been implemented in our cluster-dynamics code, Xolotl, which has been used to compute temperature and species profiles over spatiotemporal scales representative of plasma-facing component (PFC) tungsten under typical reactor operating conditions, including extreme heat loads at the plasma-facing surface characteristic of plasma instabilities that induce edge localized modes (ELMs). We demonstrate that the steady-state species profiles, when properly accounting for the Soret effect, vary significantly from those where temperature-gradient-driven transport is not accounted for and discuss the implications of such a Soret effect on the response to plasma exposure of plasma-facing tungsten. Although our cluster-dynamics simulations do not yet include self-clustering of helium or hydrogen blister formation, our simulation results show that the Soret effect substantially reduces helium and hydrogenic species retention inside PFC tungsten.

36 MATERIALS SCIENCE↗
DOE OSTI2018

On the mobility of defect clusters and their effect on microstructure evolution in fcc Ni under irradiation

Here, µs-scale molecular dynamics studies of vacancy and interstitial clusters in fcc Ni revealed three- and one- dimensional (3-D and 1-D) modes of the cluster motion. The 1-D mobility of interstitial defects is known to enhance swelling rate. The theoretical analysis performed here suggests two novel mechanism by which the 3-D mobile clusters affect microstructure evolution under irradiation. First, the mobility of vacancy clusters hinders nucleation of stable voids due to recombination with interstitial-type loops and edge dislocations. Second, the capture efficiency of dislocations is higher for 3-D mobile vacancy and interstitial clusters than single defects, with the combined effect depending on relative fractions of clustered vacancies and interstitials produced in cascades. The observed differences in radiation damage of most fcc and bcc metals is attributed to the difference in cascade-produced vacancy defects: immobile SFTs and loops in fcc metals and mobile clusters in bcc metals. In this context, fcc Ni is similar to bcc metals due to its high stacking fault energy.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Effect of Concentration on the Energetics and Dynamics of Li Ion Transport in Anatase and Amorphous TiO2

We report on the energetics and dynamics of Li diffusion in bulk anatase and amorphous TiO2 using molecular dynamics (MD) simulations and density functional theory (DFT) calculations. Using MD simulations, for both anatase and amorphous TiO2, diffusion characteristics are first studied for an isolated Li ion, followed by simulations of Li concentrations ranging from 10% to 100% in order to explore the concentration effect on the diffusivity. The isolated Li diffusion mechanism, revealed from the MD simulations, occurs via zigzag hops between the octahedral sites in anatase. The corresponding barrier for this process obtained fromDFT-NEB calculations is 480 meV.MDsimulations also show that isolated Li ion diffusivity is much slower in the amorphous TiO2 than in anatase TiO2. DFT-NEB results for the diffusion in amorphous titania indicate that Li encounters deep energy wells within the amorphous network that are in the electronvolt range, confirming our MD observation of low Li diffusivity. A monotonic decrease in diffusion barriers with increasing Li concentration is observed in the case of amorphous titania whereas a non-monotonic variation is seen in anatase, with the lowest barrier observed at 50% Li concentration. At low Li concentrations (<50%), we find that the barriers in anatase are lower than in amorphous titania. However, at the maximum Li intercalation ratios, which are experimentally known to be 50% for anatase and >75% for amorphous titania, the Li diffusivity in amorphous is found to be much higher than in anatase. Our MD simulations suggest that the underlying reason for these differences is related to changes in diffusion mechanism. Our simulations therefore indicate a strong correlation between Li ion concentration and the observed transport characteristics, offering new insights into ion conduction mechanisms that are of importance to solid-state devices used for energy storage applications.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2025

Mixing by internal gravity waves in stars: assessing numerical simulations against theory

ABSTRACT Here we present a study of radial chemical mixing in non-rotating massive main-sequence stars driven by internal gravity waves (IGWs), based on multidimensional hydrodynamical simulations with the fully compressible code MUSIC. We examine two proposed mechanisms of material mixing in stars by IGWs that are commonly quoted, relating to thermal diffusion and sub-wavelength shearing. Thermal diffusion provides a non-restorative effect to the waves, leaving material displaced from its previous equilibrium, while shearing arising within the waves drives weak localized flows, mixing the fluid there. Using IGW spectra from the simulations, we evaluate theoretical predictions of mixing rates due to these mechanisms. We show, for $20\, \mathrm{M}_\odot$ main-sequence stars, that neither of these mechanisms are likely to create mixing sufficient to correct inaccuracies in current stellar evolution models. Furthermore, we compare these predictions to results obtained from Lagrangian tracer particles, following a method recently used for global simulations of stellar interiors to measure mixing by IGWs in their radiative zones. We demonstrate that tracer particle methods face significant numerical challenges in measuring the small diffusion coefficients predicted by the aforementioned theories, for which they are prone to yielding artificially enhanced coefficients. Diffusion coefficients based on such methods are currently used with stellar evolution codes for asteroseismic studies, but should be viewed with caution. Finally, in a case where tracer particles do not suffer from numerical artefacts, we suggest that a diffusion model is not suitable for time-scales typically considered by 2D numerical simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

The effects of applied current on one-dimensional interdiffusion between copper and nickel in spark plasma sintering

Spark plasma sintering (SPS) is a powder metallurgy technique that employs the use of fast sintering kinetics to produce final consolidated components in a matter of minutes. In order to use blended powders in SPS to obtain fully alloyed parts, diffusion during sintering must be understood. An investigation into the effects of current on the diffusion of copper and nickel was performed using SPS. Bulk specimens were used to generate diffusion couples in SPS in alternating orientations with respect to the direction of the current. Control samples were produced using a horizontal insertion vacuum furnace. Experiments were performed at temperatures between 850°C and 1000°C for 3 h. Concentration profiles were obtained by the use of both energy-dispersive spectroscopy and a Monte Carlo simulated correction curve. Diffusion coefficients and activation energies were calculated for samples produced by SPS and annealing without current. It was shown that, at temperatures near 0.9 T{sub m}, the application of current in SPS inhibits diffusion between copper and nickel due to the re-orientation of electrons caused by the loss of ferromagnetism in nickel. Activation energy for diffusion is, however, decreased due to the temperature gradients arising from the difference in resistivity between the two species.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Estimation of Sorption Behavior of Europium(III) Using Biotite Flakes - 13272

The interaction of biotite and Eu(III) (europium (III)) was examined by using secondary ion-microprobe mass spectrometer (SIMS), fluorescence emission spectrum and decay behavior of fluorescence emission spectrum in addition to the time-changes of Eu(III) and potassium ions concentrations in a solution, using the flake form samples. The results of SIMS showed that the intensity of Eu was gradually decreasing with depth, while the intensity of Eu in the case shaken for 30 days exceeded that in the case for 1 day. Furthermore, the spatial distribution of Eu(III) and potassium ions in the flake of biotite suggested that Eu ions diffuse mainly from the edges of biotite flake, while Eu ions can slightly diffuse through some small cracks existing on the flake surface far from the edges. Besides, the elution amount of potassium from the biotite flakes into a solution was proportional to the sorption amount of Eu(III). The changes nearly revealed ion exchange between these ions, while muscovite flake sample did not show such ion exchange reaction. In addition, from the time-change of Eu(III) concentration, an apparent diffusion coefficient was estimated to be 8.0x10{sup -12} m{sup 2}/s, by using two-dimensional diffusion model coupled with a film between the solid phase and the liquid phase. Furthermore, the fluorescent intensity decreased with the shaking (contacting) time. This means that Eu(III) gradually diffuses into the inside of biotite edges of the biotite flakes, after the sorption of Eu(III) in the edges. This tendency was observed also in the powder samples. The observed fluorescence decay (at 592 nm in wave length) showed almost similar curve in any samples, indicating a certain sorption form of Eu(III) onto the edges of the biotite flakes. These results mentioned above suggest that the diffusion processes through internal layer in biotite mainly control the sorption behavior of multivalent ions. Such diffusion processes affect the retardation-effects on fracture surfaces in the rock matrix, depending on the fluid flow velocity of groundwater. That is, a more reliable model considering the mass transfer in the internal layer of biotite may be required to estimate the sorption behavior of RNs with biotite which controls the whole sorption behavior of granite. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗