Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “doppler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Experimental and theoretical Doppler-lidar signatures of aircraft wake vortices

The DFVLR laser Doppler anemometer is a CO2 continuous wave homodyne system designed for boundary layer wind measurements. During the last three years, it was mainly used in the wake-vortex program at Frankfurt airport for determination of vortex strength, transport, and lifetime. The strategy for that special type of measurement was previously reported in detail along with single experimental results. Therefore, herein is given a short summary of the data concerning questions of air traffic control. In addition to the experimental activities a computer model describing wake-vortex behavior was installed. It allows the comparison of the measured data with the hydrodynamically predicted quantities. On the other hand, it leads to an improved procedure for future wake-vortex measurements.

Koepp, F.↗

Determination of U, V, and W from single station Doppler radar radial velocities

The ST/MST (stratosphere troposphere/mesosphere stratosphere troposphere) clear air Doppler radar, or wind profiler, is an important tool in observational meteorology because of its capability to remote observe dynamic parameters of the atmosphere. There are difficulties in transforming the observed radial velocities into meteorological wind components. How this problem has been treated in the past is reviewed, and some of the analysis is recast to a form more suited to the high diagnostic abilities of a number of fixed beam configurations with reference to a linear wind field. The results, in conjunction with other works which treats problems such as the effects of finite sample volumes in the presence of nonhomogeneous atmospheric reflectivity, have implications important to the design of both individual MST/ST radars and MST/ST radar networks. The key parameters to uncoupling terms in the scaling equations are w sub x and w sub y. Whenever the stratiform condition, which states that these two parameters are negligible, is satisfied, a five beam ST radar may determine unbiased values of u, v, and w for sample volumes directly above the radar. The divergence and partial deformation of the flow may also be determined. Three beam systems can determine w and w sub z, but are unable to obtain u and v wind components uncontaminated by vertical sheer terms, even when the stratiform condition is satisfied.

Clark, W. L.↗

An example of scaling MST Doppler spectra using median spectra, spectral smoothing, and velocity tracing

Although automatic, computer scaling methods appeared at the start of the MST (mesosphere stratosphere troposphere) radar technique, there is a continuing need for scaling algorithms that perform editing functions and increase the sensitivity of radar by post processing. The scaling method presented is an adaptation of the method of scaling MST Doppler spectra presented by Rastogi (1984). A brief overview of this method is as follows: a median spectrum is calculated from several sequential spectra; the median noise value is subtracted from this derived spectrum; the median spectrum is smoothed; the detection/nondetection decision is made by comparing the smoothed spectrum to the variance of the smoothed noise; and if a signal is detected, then the half-power points of the smoothed echo spectrum are used to place limits on the evaluation of the first two moments of the unsmoothed median spectrum. In all of the above steps, the algorithm is guided by tracing the expected velocity range upward from the lowest range as far as possible. The method is discussed in more detail.

Green, J. L.↗

Airborne Doppler lidar activities

During August and September 1984, 20 research flights were conducted by the CV990 with airborne doppler lidar installed. Nine of these flights were dedicated to the Lidar project. Excellent data were obtained in the Carquenez Strait downwind of San Francisco Bay, showing the divergence of the flow as it passes into the Central Valley. The data clearly show the horizontal and vertical structure of the wind flow in the pass region and adjoining parts of the Central Valley. Data were also obtained in the vicinity of Mount Shasta in northern California, showing the flow in the lee of the isolated mountain. Preliminary analyses of these flights using the McIdas interactive graphics system have been accomplished, and procurements have been initiated for detailed scientific analyses. A partial failure of a crucial optical component resulted in contamination of a portion of the wind data that were obtained in the Mount Shasta and subsequent flights. Analyses are underway to attempt reconstruction of the data to minimize the effects of the failure. Data were obtained in conjunction with a microwave wind profiler at Penn State University. It is expected that data reconstruction will be of use in this case. Procurement has been initiated for scientific analyses of these results. The improved airborne Lidar system performed well. In most of the research flights a large number of different scan angles were used to obtain the vertical structure of the wind fields being investigated.

Fitzjarrald, D. R.↗

Roundoff noise analysis for digital Doppler processors in radar scatterometers

The noise due to finite word length effects for digital Doppler processors (DPP) in radar scatterometers, is analyzed. The roundoff noise-to-signal ratio in the measurement of the radar return signal power is derived. Computer simulations which validate the analytical results are presented. The results can be used in tradeoff studies of hardware design such as number of bits required at each processing stage. The results are used in the design of a DPP for the NASA scatterometer planned to be launched in 1990.

Chi, Chong-Yung↗

Doppler imaging of active regions on AR Lacertae

The eclipsing RS CVn system AR Lacertae was observed with IUE in October 1981 and October 1983. The phase coverage provided by the 1983 data is adequate to determine the location and size of two plage-like regions in the atmosphere of the K star using a Doppler imaging analysis of the Mg II k lines. A third epoch data set, consisting of many spectra spaced uniformly throughout a single orbital cycle was obtained in September 1985. Rotational modulation of the SWP line fluxes and an initial look at the Mg II lines reveals clear evidence of discrete chromospheric structures. These include a localized flare on the G star, a chromospherically inactive hemisphere on the G star, and plages on the K star.

Neff, J. E.↗

Laser Doppler Velocimeter measurements in a 3-D impinging twin-jet fountain flow

Mean velocity and turbulence measurements were conducted on the three dimensional fountain flow field generated by the impingement of two axisymmetric jets on a ground plane with application to vertical takeoff and landing (VTOL) aircraft. The basic instantaneous velocity data were obtained using a two component laser Doppler velocimeter in a plane connecting the nozzle centerlines at different heights above the ground emphasizing the jet impingement region and the fountain upwash region formed by the collision of the wall jets. The distribution of mean velocity components and turbulence quantities, including the turbulence intensity and the Reynolds shear stress, were derived from the basic velocity data. Detailed studies of the characteristics of the fountain revealed self-similarity in the mean velocity and turbulence profiles across the fountain. The spread and mean velocity decay characteristics of the fountain were established. Turbulence intensities of the order of 50% were observed in the fountain.

Saripalli, K. R.↗

Pointed telescope subassembly for the UARS High Resolution Doppler Imager

The Pointed Telescope Subassembly (PTS) consists of a telescope, its Coude relay optics, a two axis gimbal mechanism, and a cover/caging device. These components, their mechanisms, the requirements, and some of the trade-offs leading to the final design are described. The PTS supplies light to the interferometer of the High Resolution Doppler Imager to be used to study upper atmospheric wind velocity.

Renken, Robert D.↗

Optimal Doppler centroid estimation for SAR data from a quasi-homogeneous source

This correspondence briefly describes two Doppler centroid estimation (DCE) algorithms, provides a performance summary for these algorithms, and presents the experimental results. These algorithms include that of Li et al. (1985) and a newly developed one that is optimized for quasi-homogeneous sources. The performance enhancement achieved by the optimal DCE algorithm is clearly demonstrated by the experimental results.

Jin, M. Y.↗

Mean zonal winds on Venus from Doppler tracking of the Vega balloons

Doppler measurements of the two Vega balloons yield the following provisional estimates for the mean zonal wind velocity at the 53-54 km level in the Venus atmosphere: 69 + or - 1 m/sec for Vega 1 and 66 + or - 1 m/sec for Vega 2, with westward flow. The wind data show a perturbation which might be an evidence of solar tides.

Andreev, R. A.↗

Solar Doppler shifts - Sources of continuous spectra

Oscillation observations can be used to study nonoscillatory solar phenomena that exhibit Doppler shifts. The paper discusses several effects of these phenomena and their associated temporal and spatial power spectra: (1) they limit the signal-to-noise ratio and sometimes detectability of oscillation modes; (2) there is the potential for better understanding and/or detection of solar phenomena; (3) large-scale convection may spatially modulate oscillation modes, leading to a continuous background spectrum; and (4) in regions of the spectrum where the resolution to separate modes is lacking one can determine upper limits for the integrated effects of modes.

Duvall, T. L., Jr.↗

Airborne Doppler lidar measurements

This paper describes recent measurements using coherent Doppler lidars operating at a wavelength of 10.6 microns aboard the NASA Ames Convair 990. The purpose of the measurements was to obtain data on the atmospheric wind fields and the distribution of the backscatter coefficient at 10.6 microns. A decription of the instruments is provided detailing the modifications incorporated following the 1981 test flights of the systems. The measurement program is outlined, and preliminary results are discussed.

Bilbro, James W.↗

Results from 1984 airborne Doppler lidar wind measurements

Observations made with the revised Airborne Doppler Lidar System (ADLS) during research flights in the summer of 1984 are described. The functioning of the ADLS system is described. The research flights measured the flow around Mt. Shasta about 3 km above the surrounding terrain as well as the flow in the area of the Carquenez Strait in the Sacramento River Valley. The flight tracks are described and the resulting scan radial velocities are shown and discussed. The results demonstrate the success of the modifications made in order to correct major error sources present in the 1981 flights of the ADLS system.

Rothermel, Jeffry↗

Constraints on resolving meso-alpha and meso-beta phenomena using a space-based Doppler lidar wind profiler

Lidar shot management and wind computation algorithms are used to determine the constraints on resolving mesoscale (alpha and beta) wind fields. Examples of simulated Doppler lidar performance in resolving wind gradient features are presented using currently proposed scan and signal processing parameters, and GCM model outputs are used as input wind fields. Results indicate that with the present constraints on lidar lifetime, scan rates, and orbit altitudes, the limits of mesoscale wind feature resolution are close to wavelengths of 100 km.

Emmitt, G. D.↗

Measurement of a counter rotation propeller flowfield using a Laser Doppler Velocimeter

This paper is a summary of the results of the experimental investigation of the flow field about a counter-rotating propeller (CRP) system using a Laser Doppler Velocimeter (LDV). The number of configurations available for the CRP system is limitless, thus only a small portion of the number of possible cases were examined. Measurements were made upstream, in between and downstream of the propeller system. The abundance of data readily available from the LDV system clearly identifies the tip vortices and wake regions. The recovery by the downstream propeller of the swirl velocity imparted to the flow by the upstream propeller is very evident. The coefficients of thrust and power were determined using momentum and energy analysis of the data and compared to theory.

Harrison, G. L.↗

A high resolution spatial and temporal multiple Doppler analysis of a microburst and its application to aircraft flight simulation

Multiple Doppler radar data collected during the Joint Airport Weather Studies (JAWS) Project is used to synthesize the three-dimensional wind in the region of a microburst. The particular microburst used in this study is the strongest one to date for which three-dimensional winds have been recovered. As a diagnostic tool, a six-DOF numerical aircraft model having characteristics similar to 727 series aircraft is used to investigate jet transport aircraft response to observed microburst winds during simulated approaches and departures. Simple pilot control laws are used to adjust thrust, pitch, roll, and yaw so as to maintain given approach or departure parameters. Generally, when horizontal wind shear along the approach or departure path is 0.01/s or greater, the model is unable to maintain the desired approach path and suffers a significant reduction in climb performance during a go-around or departure. Although the mean wind shear along a path gives a good qualitative measure of the wind shear threat to a jet transport, different paths with similar mean shears can yield markedly different results, as do the same paths through the microburst at different times. These findings are a direct consequence of the fine temporal and spatial scale of microburst winds. During any given modeled aircraft traverse through the region of highest horizontal shear, time variations in the microburst wind field are shown to have an insignificant effect on the modeled flight path. This is because the traverse period is short (30 s) compared to the lifetime of a microburst (300-600 s).

Elmore, K. L.↗

Observations of Oklahoma severe thunderstorms using airborne Doppler lidar

The NASA airborne Doppler lidar was successfully employed in obtaining detailed views of the horizontal wind fields near a complex of severe multicell thunderstorms in central Oklahoma on June 30, 1981. Despite uncertainties caused by inertial navigation errors, clear pictures of the relative reflectivity distributions, horizontal wind velocity, and velocity spectral width near the cloud base were obtained. The presence of numerous gust front vortices along the leading edge of the advancing storm outflow were noted which correspond to inflections in the shape of the gust front arcus cloud formation. Explanations for the observed vortical circulations and calculated vorticities are given.

Mccaul, E. W., Jr.↗

Parameter estimation based on Doppler frequency shifts

An acoustic source generates an amplitude-modulated tone, with Doppler variations due to the relative motion between source and receiver. A method is presented for real-time estimation of tone rest frequency and minimal distance between source and receiver, using digital signal processing techniques. The algorithm presented here was implemented using a Texas Instruments TMS32010 processor.

Statman, Joseph I.↗