Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “determinant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Determination of the Hubble Space Telescope effective conic-constant error from direct image measurements

Direct measurement of discernible features in the Hubble Space Telescope (HST) imagery has enabled a self-consistent determination to be made of the effective conic constant of HST images taken with planetary camera 6 (PC-6) of the wide field and planetary camera. Before being corrected for the contribution from PC-6, the conic constant is -1.01429 +/- 0.0002. The correction for PC-6 is less accurately determined but probably lies between -0.0002 and 0.0004. As a result the HST optics are characterized best by a conic constant of -1.0140 +/-0.0003 as obtained from direct image measurements.

Meinel, Aden B.↗
NASA NTRS1993

Determination of (C-12)/(C-13) in the interstellar medium toward Zeta Ophiuchi and Xi Persei

The Lick Observatory Reticon (LOR) data presented in Hawkins et al. (1985) are reanalyzed in order to determine the cause of the significant discrepancy in (C-12)/(C-13) isotope ratios determined on the basis of observations of this isotope in the interstellar medium toward Zeta Ophiuchi and Xi Persei. A new set of Lick Observatory observations toward Zeta Oph are obtained using a CCD detector. The KPNO coude feed echelle spectrograph and a CCD detector are used to carry out high-resolution, high SNR ratio observations toward Zeta Oph and Xi Per. The LOR results for Zeta Oph are uncertain, ranging to 40 to 60, owing to the error in continuum placement. The KPNO results toward Zeta Oph are (C-12)H/(C-13)H(+)(0, 0) = 63 +/- 8, (C-12)H(+)/(C-13)H(+)(1, 0) = 67 +/- 19, and (C-12)N/(C-13)N = 100 + 88/- 33. Toward Xi Per, the KPNO measurements yield (C-12)H(+)/(C-13)H(+) = 49 +/- 15 from the 4232-A band, and a lower limit of 45 from the 3957-A observations.

Hawkins, Isabel↗
NASA NTRS1993

Unique determination of model coronal magnetic fields using photospheric observations

We show that the nonradial field-boundary condition (or the line-of-sight boundary condition) for the Laplacian-like equation developed by Bogdan and Low (1986) is sufficient to uniquely determine the model coronal magnetic field provided the electric currents are horizontal (or zero, the current-free case) at the solar surface as well as in the solar atmosphere between the photosphere and the source surface. The derived recursion formulae for the spherical harmonic coefficients can be used to determine the spherical harmonic coefficients in the solutions of the horizontal current models very efficiently.

Zhao, Xuepu↗
NASA NTRS1992

Stepwise shockwave velocity determinator

To provide an uncomplicated and inexpensive method for measuring the far-field velocity of a surface shockwave produced by an explosion, a stepwise shockwave velocity determinator (SSVD) was developed. The velocity determinator is constructed of readily available materials and works on the principle of breaking discrete sensors composed of aluminum foil contacts. The discrete sensors have an average breaking threshold of approximately 7 kPa. An incremental output step of 250 mV is created with each foil contact breakage and is logged by analog-to-digital instrumentation. Velocity data obtained from the SSVD is within approximately 11 percent of the calculated surface shockwave velocity of a muzzle blast from a 30.06 rifle.

Roth, Timothy E.↗
NASA NTRS1993

A novel pulse technique for thermal diffusivity determination of high-temperature levitated materials - Inverse analysis and experimental set-up

In order to determine the thermal diffusivity of materials at high temperatures, a two-step extended flash technique, which is applicable to levitated spherical samples, is proposed. The containerless flash method is modeled as an axisymmetric transient conduction heat transfer problem within the sphere subjected to a radiative boundary condition on its surface. The problem of nonlinearity which arises from the radiative heat transfer boundary condition is solved by replacing it with the measured time-dependent surface temperature data, thus giving rise to an 'Inverse Analysis'. Upon obtaining the analytic solution for the temperature field, the determination of the thermal diffusivity turns into a minimization problem, whereby the difference between the actual surface boundary condition and the analytic solution is minimized. In performing the proposed experiments, there is a need to undertake a cool-down experiment which should be governed by the lumped parameter analysis.

Shen, F.↗
NASA NTRS1993

Feasibility of determining haze properties during high-speed Titan entry

An international cooperative project between the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) is planning to send a probe into the atmosphere of Titan (a moon of Saturn) as part of the Cassini Mission to Saturn. This paper analyzes the feasibility of measuring the intensity of atomic carbon and hydrogen line emission in the shock layer during the high velocity portion of the entry to determine the number density and composition of the organic haze particles in the Titan atmosphere. Analysis indicates that the line radiation signal-to-noise ratios are high enough so that determination of the haze particle number density and composition appears to be feasible. The analysis may be applicable to other future planetary missions.

Nelson, H. F.↗
NASA NTRS1993

Determining electron temperature and density in a hydrogen microwave plasma

A three-temperature thermo-chemical model is developed for analyzing the chemical composition and energy states of a hydrogen microwave plasma used for studying diamond deposition. The chemical and energy exchange rate coefficients are determined from cross section data, assuming Maxwellian velocity distributions for electrons. The model is reduced to a zero-dimensional problem to solve for the electron temperature and ion mole fraction, using measured vibrational and rotational temperatures. The calculations indicate that the electron temperature may be determined to within a few percent error even though the uncertainty in dissociation fraction is many times larger.

Scott, Carl D.↗
NASA NTRS1993

Line-of-sight determination in real-time simulations

This paper describes the selection of a method for determining line-of-sight in real-time simulations for the NASA Ames Vertical Motion Simulator (VMS) facility. Five different combinations of terrain representation and line-of-sight determination algorithms were tested. A gridpost terrain format, in conjunction with a Digital Differential Analyzer algorithm, was found to best meet the simulation criteria of high speed, low storage requirements, and accuracy.

Kull, Frederick G., Jr.↗
NASA NTRS1993

An improved method for determining force balance calibration accuracy

The results of an improved statistical method used at Langley Research Center for determining and stating the accuracy of a force balance calibration are presented. The application of the method for initial loads, initial load determination, auxiliary loads, primary loads, and proof loads is described. The data analysis is briefly addressed.

Ferris, Alice T.↗
NASA NTRS1940

Drag Determination of the Forward Component of a Tricycle Landing Gear

Wind-tunnel tests were performed to determine the drag of the front-wheel arrangements of several types of tricycle landing gear. One wheel was tested in arrangements to simulate both nonretracted and partially retracted types. The landing gears were tested in conjunction with a fuselage, and the effects of wheel extension and longitudinal location were determined. The drag changed very little with either longitudinal location or wheel extension for the landing gear with the lowest drag; a completely faired landing gear of the wheelspan, single-strut type. The drag of the trouser-type landing gear increased considerably, however, with an increase in the wheel extension. The wheel of the unaired retractable landing gear was at least one-half retracted into the fuselage before the drag became less than that of the best nonretracted landing gear. The drag per unit frontal area of the landing gears of the present tests was about the same as that found for similar landing gears in earlier tests.

Harmon, Hubert N↗
NASA NTRS1942

The Tracer Gas Method of Determining the Charging Efficiency of Two-stroke-cycle Diesel Engines

A convenient method has been developed for determining the scavenging efficiency or the charging efficiency of two-stroke-cycle engines. The method consists of introducing a suitable tracer gas into the inlet air of the running engine and measuring chemically its concentration both in the inlet and exhaust gas. Monomethylamine CH(sub 3)NH(sub 2) was found suitable for the purpose as it burns almost completely during combustion, whereas the "short-circuited" portion does not burn at all and can be determined quantitatively in the exhaust. The method was tested both on four-stroke and on two-stroke engines and is considered accurate within 1 percent.

Schweitzer, P H↗
NASA NTRS1943

A method for determining the column curve from tests of columns with equal restraints against rotation on the ends

The results are presented of a theoretical study for the determination of the column curve from tests of column specimens having ends equally restrained against rotation. The theory of this problem is studied and a curve is shown relating the fixity coefficient c to the critical load, the length of the column, and the magnitude of the elastic restraint. A method of using this curve for the determination of the column curve for columns with pin ends from tests of columns with elastically restrained ends is presented. The results of the method as applied to a series of tests on thin-strip columns of stainless steel are also given.

Lundquist, Eugene E↗
NASA NTRS1922

Testing airplanes in flight: determining position of resultant of action of air and longitudinal stability of an airplane at different angles of attack

Measurements made during flight with the triple recording device which gives the horizontal and vertical speeds of an airplane and the angle it makes with the horizon, render it possible to calculate its lift, its drag, and R the resultant of the action of the air both in magnitude and direction, but with these data alone, it is impossible to determine the position of this resultant in the plane of symmetry of the airplane. We will also see how we may determine the position of R during flight and then calculate the variations in the stability of an airplane.

STABILITY, LONGITUDINAL↗
NASA NTRS1951

Tests of Two-Blade Propellers in the Langley 8-Foot High-Speed Tunnel to Determine the Effect on Propeller Performance of a Modification of Inboard Pitch Distribution

Tests of two propellers having two blades and differing only in the inboard pitch distribution were made in the Langley 8-foot highspeed tunnel to determine the effect of inboard pitch distribution on propeller performance. propeller was designed for operation in the reduced velocity region ahead of an NACA cowling; the inboard pitch distribution of the modified propeller was increased for operation at or near free-stream velocities, such as would be obtained in a pusher installation. conditions covering climb, cruise, and high-speed operation. Wake surveys were taken behind the propellers in order to determine the distribution of thrust along the blades and to aid in the analysis of the results. Test results showed that the modified propeller was about 2.5 percent less efficient for a typical climb condition at all altitudes, 2 percent more efficient for one cruise condition, and 5 percent more efficient for high-speed operation. speed condition, the modified propeller showed a 6-percent loss in efficiency due to compressibility; whereas the original propeller showed an 11-percent efficiency loss due to compressiblity. The lower compressibility loss for the modified propeller resulted from the fact that the inboard sections of this propeller could operate at increased thrust loading after compressibility losses had occurred at the outboard sections.

PROPELLERS - PERFORMANCE↗
NASA NTRS1956

Determination of the structural damping coefficients of six full-scale helicopter rotor blades of different materials and methods of construction

Results of an experimental investigation of the structural damping of six full-scale helicopter rotor blades, made to determine the variation of structural damping with materials and methods of construction, are presented. The damping of the blades was determined for the first three flapwise bending modes, first chordwise bending mode, and first torsion mode. The contribution of structural damping to the total damping of the blades is discussed for several aerodynamic conditions in order to point out situations where structural damping is significant.

WINGS, ROTATING - EXPERIMENTAL STUDIES↗
NASA NTRS1941

Determination of control-surface characteristics from NACA plain-flap and tab data

The data from previous NACA pressure-distribution investigations of plain flaps and tabs have been analyzed and are presented in this paper in a form readily applicable to the problems of control-surface design. The experimentally determined variation of aerodynamic parameters with flap chord and tab chord are given in chart form and comparisons are made with the theory. With the aid of these charts and the theoretical relationships for a thin airfoil, the aerodynamic characteristics for control surfaces of any plan form with plain flaps and tabs may be determined. A discussion of the basic equations of the thin-airfoil theory and the development of a number of additional equations that will be helpful in tail design are presented in the appendixes. The procedure for applying the data is described and a sample problem of tail design is included. The data presented and the method of application set forth in this report should provide a reasonably accurate and satisfactory means of computing the aerodynamic characteristics of control surfaces.

TAIL SURFACES, HORIZONTAL - CHAR↗
NASA NTRS1955

Longitudinal Stability and Control Characteristics as Determined by the Rocket-model Technique for an Inline, Cruciform, Canard Missile Configuration with a Low-aspect-ratio Wing Having Trailing-edge Flap Controls for a Mach Number Range of 0.7 to 1.

Two full-scale models of an inline, cruciform, canard missile configuration having a low-aspect-ratio wing equipped with flap-type controls were flight tested in order to determine the missile's longitudinal aerodynamic characteristics. Stability derivatives and control and drag characteristics are presented for a range of Mach number from 0.7 to 1.8. Nonlinear lift and moment curves were noted for the angle - of-attack range of this test (0 deg to 8 deg). The aerodynamic-center location for angles of attack near 50 remained nearly constant for supersonic speeds at 13.5 percent of the mean aerodynamic chord; whereas for angles of attack near 0 deg, there was a rapid forward movement of the aerodynamic center as the Mach number increased. At a control deflection of 0 deg, the missile's response to the longitudinal control was in an essentially fixed space plane which was not coincident with the pitch plane as a result of the missile rolling. As a consequence, stability characteristics were determined from the resultant of pitch and yaw motions. The damping-in-pitch derivatives for the two angle -of-attack ranges of the test are in close agreement and varied only slightly with Mach number. The horn-balanced trailing-edge flap was effective in producing angle of attack over the Mach number range.

Baber, Hal T , Jr↗
NASA NTRS1925

Determination of ignition points of liquid fuels under pressure

Two series of experiments were tried, in order to determine the ignition point at any desired pressure, the first series at constant and the second at varying pressure. The results differ greatly and indicate that testing under pressure, in the investigation of liquid fuels, can be done best in the laboratory and that the determination of the ignition points in an open vessel furnishes no certain indication of the behavior of the fuel in the engine.

FUELS↗