Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Effect of amorphous Mg{sub 50}Ni{sub 50} on hydriding and dehydriding behavior of Mg{sub 2}Ni alloy

Composite Mg{sub 2}Ni (25 wt.%) amorphous Mg{sub 50}Ni{sub 50} was prepared by mechanical milling starting with nanocrystalline Mg{sub 2}Ni and amorphous Mg{sub 50}Ni{sub 50} powders, by using a SPEX 8000 D mill. The morphological and microstructural characterization of the powders was performed via scanning electron microscopy and X-ray diffraction. The hydriding characterization of the composite was performed via a solid gas reaction method in a Sievert's-type apparatus at 363 K under an initial hydrogen pressure of 2 MPa. The dehydriding behavior was studied by differential thermogravimetry. On the basis of the results, it is possible to conclude that amorphous Mg{sub 50}Ni{sub 50} improved the hydriding and dehydriding kinetics of Mg{sub 2}Ni alloy upon cycling. A tentative rationalization of experimental observations is proposed. - Research Highlights: {yields} First study of the hydriding behavior of composite Mg{sub 2}Ni (25 wt.%) amorphous Mg{sub 50}Ni{sub 50}. {yields} Microstructural characterization of composite material using XRD and SEM was obtained. {yields} An improved effect of Mg{sub 50}Ni{sub 50} on the Mg{sub 2}Ni hydriding behavior was verified. {yields} The apparent activation energy for the hydrogen desorption of composite was obtained.

08 HYDROGEN↗

On the preparation of as-produced and purified single-walled carbon nanotube samples for standardized X-ray diffraction characterization

The aim of this research was to specify proper sample conditioning for acquiring representative X-ray diffraction (XRD) profiles for single-walled carbon nanotube (SWCNT) samples. In doing so, a specimen preparation method for quantitative XRD characterization of as-produced and purified arc-discharge SWCNT samples has been identified. Series of powder XRD profiles were collected at different temperatures, states, and points of time to establish appropriate conditions for acquiring XRD profiles without inducing much change to the specimen. It was concluded that heating in the 300-450 deg. C range for 20 minutes, preferably vacuum-assisted, and then sealing the sample is an appropriate XRD specimen preparation technique for purified arc-discharge SWCNT samples, while raw samples do not require preconditioning for characterization. - Graphical Abstract: A sample preparation method for XRD characterization of as-produced and purified arc-discharge SWCNT samples is identified. The preparation technique seeks to acquire representative XRD profiles without inducing changes to the samples. Purified samples required 20 minutes of heating at (300-450)deg. C, while raw samples did not require preconditioning for characterization. Highlights: {yields} Purification routines may induce adsorption onto the SWCNT samples. {yields} Heating a SWCNT sample may result in material loss, desorption, and SWCNTs closing. {yields} Raw arc-discharge samples do not require preparation for XRD characterization. {yields} Heating is appropriate specimen preparation for purified and heat-treated samples. {yields} XRD data fitting is required for structural analysis of SWCNT bundles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lamellar {gamma}-AlOOH architectures: Synthesis and application for the removal of HCN

Using hexadecyl trimethyl ammonium bromide (CTAB) as a structure-directing agent and precipitator, the complete synthesis of lamellar {gamma}-AlOOH architectures was successfully accomplished via a hydrothermal route. Different product structures were obtained by varying the molar ratio of aluminum nitrate and CTAB. Several techniques, including X-ray powder diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, and differential scanning calorimetry thermal analysis, were used to characterize the products. The effects of CTAB concentration, reaction temperature and time, and the molar ratio of Al{sup 3+}/CTAB on the product morphologies were investigated. The nitrogen adsorption and desorption measurements indicated that the {gamma}-AlOOH architectures possess a Brunauer-Emmett-Teller surface area of approximately 75.02 m{sup 2}/g. It was also demonstrated that 10 mg {gamma}-AlOOH architectures can remove 45.3% of the HCN (1.68 {mu}g/mL) from model wastewater. When 0.03 mg/cig {gamma}-AlOOH architectures were combined with cigarette paper, 8.12% of the present HCN was adsorbed. These results indicate that lamellar {gamma}-AlOOH architectures may be a potential adsorbent for removing HCN from highly toxic pollutant solutions and harmful cigarette smoke. Highlights: Black-Right-Pointing-Pointer Hexadecyl trimethyl ammonium bromide (CTAB) was used as a structure-directing agent and precipitator. Black-Right-Pointing-Pointer Hydrothermal treatment enables growth of lamellar {gamma}-AlOOH architectures. Black-Right-Pointing-Pointer Lamellar {gamma}-AlOOH architectures were demonstrated to exhibit high BET surface area and excellent adsorptive capacity. Black-Right-Pointing-Pointer HCN in contaminated water and cigarette smoke can be effectively removed by the prepared lamellar {gamma}-AlOOH superstructures.

36 MATERIALS SCIENCE↗

Synthesis and characterization of high-surface-area millimeter-sized silica beads with hierarchical multi-modal pore structure by the addition of agar

Millimeter-sized spherical silica foams (SSFs) with hierarchical multi-modal pore structure featuring high specific surface area and ordered mesoporous frameworks were successfully prepared using aqueous agar addition, foaming and drop-in-oil processes. The pore-related properties of the prepared spherical silica (SSs) and SSFs were systematically characterized by field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), small-angle X-ray diffraction (SAXRD), Hg intrusion porosimetry, and N{sub 2} adsorption–desorption isotherm measurements. Improvements in the BET surface area and total pore volume were observed at 504 m{sup 2} g{sup −1} and 5.45 cm{sup 3} g{sup −1}, respectively, after an agar addition and foaming process. Despite the increase in the BET surface area, the mesopore wall thickness and the pore size of the mesopores generated from the block copolymer with agar addition were unchanged based on the SAXRD, TEM, and BJH methods. The SSFs prepared in the present study were confirmed to have improved BET surface area and micropore volume through the agar loading, and to exhibit interconnected 3-dimensional network macropore structure leading to the enhancement of total porosity and BET surface area via the foaming process. - Highlights: • Millimeter-sized spherical silica foams (SSFs) are successfully prepared. • SSFs exhibit high BET surface area and ordered hierarchical pore structure. • Agar addition improves BET surface area and micropore volume of SSFs. • Foaming process generates interconnected 3-D network macropore structure of SSFs.

36 MATERIALS SCIENCE↗

Novel Y doped Bi{sub 2}WO{sub 6} photocatalyst: Hydrothermal fabrication, characterization and enhanced visible-light-driven photocatalytic activity for Rhodamine B degradation and photocurrent generation

Visible-light-driven (VLD) Yttrium (Y) ion doped Bi{sub 2}WO{sub 6} photocatalyst has been synthesized via a facile hydrothermal route. Incorporation of Y{sup 3} {sup +} into Bi{sub 2}WO{sub 6} lattice was successfully confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and ICP analysis. The microstructure and optical property of the as-prepared samples have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherm and UV–vis diffuse reflectance spectra (DRS). The photocatalytic experiments indicated that the Y-Bi{sub 2}WO{sub 6} showed a much higher photocatalytic activity than the pristine Bi{sub 2}WO{sub 6} for the degradation of Rhodamine B (RhB) and photocurrent (PC) generation. This enhancement should be ascribed to the slightly increased band gap and the generated defects by Y{sup 3} {sup +} doping, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Such a process was verified by the photoluminescence (PL) spectroscopy. In addition, the active species trapping experiments indicated that holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) play important roles in the photocatalytic reaction. - Highlights: • Novel Y-Bi{sub 2}WO{sub 6} photocatalyst has been synthesized by a facile hydrothermal route. • Y-Bi{sub 2}WO{sub 6} exhibits a much higher photocatalytic activity than pristine Bi{sub 2}WO{sub 6}. • Holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) are the two main active species. • Y{sup 3} {sup +} ion can result in a low recombination of photogenerated electron and hole.

36 MATERIALS SCIENCE↗

Formation and mechanism of nanocrystalline AZ91 powders during HDDR processing

Grain sizes of AZ91 alloy powders were markedly refined to about 15 nm from 100 to 160 μm by an optimized hydrogenation-disproportionation-desorption-recombination (HDDR) process. The effect of temperature, hydrogen pressure and processing time on phase and microstructure evolution of AZ91 alloy powders during HDDR process was investigated systematically by X-ray diffraction, optical microscopy, scanning electron microscopy and transmission electron microscopy, respectively. The optimal HDDR process for preparing nanocrystalline Mg alloy powders is hydriding at temperature of 350 °C under 4 MPa hydrogen pressure for 12 h and dehydriding at 350 °C for 3 h in vacuum. A modified unreacted core model was introduced to describe the mechanism of grain refinement of during HDDR process. - Highlights: • Grain size of the AZ91 alloy powders was significantly refined from 100 μm to 15 nm. • The optimal HDDR technology for nano Mg alloy powders is obtained. • A modified unreacted core model of grain refinement mechanism was proposed.

36 MATERIALS SCIENCE↗

Hydrogen induced mechanical degradation in tungsten alloyed steels

Highlights: • The effect of H charging on tungsten alloyed steels is assessed by tensile tests. • The HE resistance increased for the Q&T condition compared to the as-Q state. • H trapping and absorption are determined by H characterization methods. • H diffusivity was higher in Q&T condition due to dislocation density decrease. • A correlation between the degree of HE and the amount of mobile H was established. - Abstract: The present work considers the effect of hydrogen on the mechanical properties of generic Fe-C-W alloys. Thermal treatment aimed at a martensitic microstructure and two conditions are compared; i.e. an as-quenched state and a quenched and tempered state with lower dislocation density and with W based carbides formed during tempering. The hydrogen induced mechanical degradation is evaluated by in-situ tensile tests, while thermal desorption spectroscopy, hot/melt extraction and permeation experiments are performed to understand the observed hydrogen embrittlement degree. The hydrogen induced ductility loss increases with increasing carbon content due to the higher amount of hydrogen trapped by the denser martensitic lath boundaries. Furthermore, the quenched and tempered condition shows a lower susceptibility to hydrogen. This is correlated to the reduced hydrogen content when tempered due to a decreased dislocation density and the fact that the tempered induced W{sub 2}C particles did not trap hydrogen. Moreover, corresponding observations to this interpretation are perceived by permeation experiments since, on the one hand, the diffusion coefficient decreases with carbon content due to the increasing trapping ability of alloy A → B → C, and, on the other hand, the diffusivity increases when tempering is applied, which is also linked to the decrease in dislocation density and the disability of the carbides to hinder hydrogen diffusion by efficient trapping.

36 MATERIALS SCIENCE↗

The role of titanium and vanadium based precipitates on hydrogen induced degradation of ferritic materials

Highlights: • Hydrogen induced damage is studied in Fe-C-Ti and Fe-C-V ferritic alloys. • Fe-C-Ti is less susceptible to hydrogen embrittlement than Fe-C-V. • Fe-C-V is less susceptible to blistering than Fe-C-Ti. • The role of diffusible hydrogen depends on the damage mechanism. - Abstract: The hydrogen induced damage of generic Fe-C-Ti and Fe-C-V ferritic alloys was investigated to assess the influence of precipitates on the hydrogen sensitivity of a material. The precipitates, formed during heat treatment, were evaluated by scanning transmission electron microscopy (STEM). The hydrogen/material interaction was evaluated by: 1) melt and hot extraction to determine the total and diffusible hydrogen content, respectively, 2) permeation experiments to calculate the diffusion coefficient, 3) thermal desorption spectroscopy to determine the hydrogen trapping characteristics of the materials. Furthermore, two different types of hydrogen induced damage were evaluated, i.e. hydrogen assisted cracking and blistering, resulting from electrochemical hydrogen charging with and without the application of an external load, respectively. Evaluation of the hydrogen induced damage and the role of the precipitates was performed by combining optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). An important though divertive role of diffusible hydrogen is observed in both damage mechanisms for the investigated microstructures. On the one hand, a large amount of diffusible hydrogen compared to strongly trapped hydrogen promotes hydrogen assisted cracking of materials, while on the other hand, the blistering phenomenon is delayed under such conditions.

36 MATERIALS SCIENCE↗

Fabrication of hierarchical meso/macroporous TiO2 scaffolds by evaporation-induced self-assembly technique for bone tissue engineering applications

Highlights: • Hierarchical meso/macroporous TiO{sub 2} scaffolds were produced. • TiO{sub 2} formation mechanism was investigated. • The scaffolds had a pore size of 150–300 μm and meso pores of 6–12 nm. • The specific surface area obtained from BET theory was 67.89 m{sup 3} g{sup −1}. - Abstract: This paper reports the synthesis of hierarchical meso/macroporous TiO{sub 2} scaffolds by mimicking bone structure. Evaporation-induced self-assembly (EISA) method along with foamy method was utilized to produce TiO{sub 2} scaffolds in situ. Simultaneous thermal analysis (STA), small angle X-ray diffraction (SAXD), wide-angle X-ray diffraction (WAXD), nitrogen adsorption–desorption isotherm analysis, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques were applied to characterize the scaffolds. The results showed that TiO{sub 2} scaffolds can be produced after sintering the specimens at 550 °C for 2 h. The obtained scaffolds had a pore size in the range of 150–300 μm and meso pores in the range of 6–12 nm. The specific surface area was obtained from the Brunauer–Emmett–Teller theory, the total volume and mean diameter of pores were 67.89 m{sup 3} g{sup −1}, 0.1245 cm{sup 3} g{sup −1} and 7.3 nm, respectively.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic properties of TiO{sub 2} nanostructures

TiO{sub 2} particles, rods, flowers and sheets were prepared by hydrothermal method via adjusting the temperature, the pressure and the concentration of TiCl{sub 4}. The as-prepared TiO{sub 2} powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectra and N{sub 2} adsorption-desorption measurements. It was found that pressure is the most important factor influencing the morphology of TiO{sub 2}. The photocatalytic activity of the products was evaluated by the photodegradation of aqueous brilliant red X-3B solution under UV light. Among the as-prepared nanostructures, the flower-like TiO{sub 2} exhibited the highest photocatalytic activity.

36 MATERIALS SCIENCE↗

A new synthesis of lamellar-mesostructured silica by using poly(ethylene glycol) distearate as template

A lamellar-mesostructured silica has been synthesized by using poly(ethylene glycol) distearate as template in ethanol solution. Highly ordered lamellar mesostructure was confirmed by X-ray diffraction pattern, transmission electronic microscopy, and nitrogen adsorption-desorption isotherm. The material obtained in this work has a large interlayer distance, and good thermal and mechanical stabilities, which can favor the preparation of the in situ polymerized nanocomposites based on intercalation of polymers in the lamellar-mesostructured silica.

36 MATERIALS SCIENCE↗

Photoluminescence characteristics of ZnO clusters confined in the micropores of zeolite L

Sub-nanometric ZnO clusters were prepared in the micropores of zeolite L by the incipient wetness impregnation method. The X-ray patterns (XRD), transmission electron microscope (TEM), N{sub 2} adsorption-desorption isotherms, UV-vis absorption spectra (UV-vis) and photoluminescence spectra (PL) were used to characterize the composite materials. The results indicate that a small amount of sub-nanometric ZnO clusters can be introduced into the channel of zeolite L, however, when the amount of ZnO loading exceeds 20 wt%, macrocrystalline ZnO appears on the external surface of zeolite L. Different from bulk ZnO materials, these sub-nanometric ZnO clusters exhibit their absorption onset below 255 nm and a blue luminescence band in the range of 404-422 nm. The temperature-dependent luminescence demonstrates that the amount of the ZnO loading significantly affects the exciton-phonon interaction between the ZnO clusters and the zeolite host. The ZnO clusters exhibit a picosecond scale emission lifetime at room temperature.

36 MATERIALS SCIENCE↗

Synthesis, characterization and properties of carbon nanotubes microspheres from pyrolysis of polypropylene and maleated polypropylene

Microspheres assembled from carbon nanotubes (MCNTs), with the diameters ranging from 5.5 to 7.5 {mu}m, were synthesized by means of pyrolysis of polypropylene and maleated polypropylene in an autoclave. The characterization of structure and morphology was carried out by X-ray diffractometer (XRD), field-emission scanning electron microscopy (FESEM), (high resolution) transmission electron microscope [(HR)TEM)], selected-area electron diffraction (SAED) and Raman spectrum. As a typical morphology, the possible growth process of MCNTs was also investigated and discussed. The results of nitrogen adsorption-desorption indicate that the Brunauer-Emett-Teller (BET) surface area (140.6 m{sup 2}/g) of the MCNTs obtained at 600 {sup o}C is about twice as that (74.5 m{sup 2}/g) of carbon nanotubes obtained at 700 {sup o}C. The results of catalytic experiment show that MCNTs based catalyst has higher catalytic activity than the carbon nanotubes based catalyst for the preparation of methanol and dimethoxy-ethane by oxidation of dimethyl ether.

36 MATERIALS SCIENCE↗

Adsorption of vitamin E on mesoporous titania nanocrystals

Tri-block nonionic surfactant and titanium chloride were used as starting materials for the synthesis of mesoporous titania nanocrystallite powders. The main objective of the present study was to examine the synthesis of mesoporous titania nanocrystals and the adsorption of vitamin E on those nanocrystals using X-ray diffraction (XRD), transmission electron microscopy, and nitrogen adsorption and desorption isotherms. When the calcination temperature was increased to 300 {sup o}C, the reflection peaks in the XRD pattern indicated the presence of an anatase phase. The crystallinity of the nanocrystallites increased from 80% to 98.6% with increasing calcination temperature from 465 {sup o}C to 500 {sup o}C. The N{sub 2} adsorption data and XRD data taken after vitamin E adsorption revealed that the vitamin E molecules were adsorbed in the mesopores of the titania nanocrystals.

36 MATERIALS SCIENCE↗

Preparation of silica-sustained electrospun polyvinylpyrrolidone fibers with uniform mesopores via oxidative removal of template molecules by H{sub 2}O{sub 2} treatment

Silica-sustained electrospun PVP fibers with uniform mesopores were synthesized via facile oxidative removal of template molecules by H{sub 2}O{sub 2} extraction. Tetraethyl orthosilicate, polyvinylpyrrolidone (PVP), and triblock poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) copolymer pluronic P{sub 123} compose the electrospinning sol to fabricate the silica-sustained PVP hybrid fibers. The effect of different post-treatment methods on the pore size distribution was investigated by calcination and extraction, respectively. Experimental results showed that oxidative removal of structure-directing agent P{sub 123} in the hybrid fibers by H{sub 2}O{sub 2} treatment can easily form narrow pore size distribution, and the incorporation of 3D silica skeleton built by hot steam aging facilitated preserving the original cylindrical morphology of fibers. Scanning electron microscopy (SEM), N{sub 2} adsorption-desorption isotherm, transmission electron microscopy (TEM), X-ray diffraction (XRD), FT-IR spectra and thermogravimetric analysis (TGA) were used to characterize the hybrid fibers. The hybrid fibers can be expected to have potential applications in drug release or tissue engineering because of their suitable pore size, large surface area and good biocompatibility.

36 MATERIALS SCIENCE↗

High-performance carbon nanotube-implanted mesoporous carbon spheres for supercapacitors with low series resistance

Research highlights: {yields} CNTs-implanted porous carbon spheres are prepared by using gelatin as soft template. {yields} Homogeneously distributed CNTs form a well-develop network in carbon spheres. {yields} CNTs act as a reinforcing backbone assisting the formation of pore structure. {yields} CNTs improve electrical conductivity and specific capacitance of supercapacitor. -- Abstract: Carbon nanotube-implanted mesoporous carbon spheres were prepared by an easy polymerization-induced colloid aggregation method using gelatin as a soft template. Scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption measurements reveal that the materials are mesoporous carbon spheres, with a diameter of {approx}0.5-1.0 {mu}m, a specific surface area of 284 m{sup 2}/g and average pore size of 3.9 nm. Using the carbon nanotube-implanted mesoporous carbon spheres as electrode material for supercapacitors in an aqueous electrolyte solution, a low equivalent series resistance of 0.83 {Omega} cm{sup 2} and a maximum specific capacitance of 189 F/g with a measured power density of 8.7 kW/kg at energy density of 6.6 Wh/kg are obtained.

36 MATERIALS SCIENCE↗

Microwave synthesis and electrochemical characterization of mesoporous carbon@Bi{sub 2}O{sub 3} composites

Graphical abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance is up to 386 F g{sup -1}. Research highlights: {yields} An efficient and quick microwave method has been employed. {yields} A worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites have been successfully prepared. {yields} This composite exhibits excellent capacitance performance. {yields} This composite could be a potential electrode material for the supercapacitors. -- Abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. As-prepared products have been characterized by X-ray diffraction, N{sub 2} adsorption-desorption, scanning electron microscopy, transmission electron microscopy and inductive coupled plasma atomic emission spectroscopy. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance reaches 386 F g{sup -1}, three times more than the pure worm-like mesoporous carbon.

36 MATERIALS SCIENCE↗

Crystallization and morphology of mordenite zeolite influenced by various parameters in organic-free synthesis

Research highlights: {yields} Seed, gel composition and silicon source affect the crystallization process of MOR. {yields} Seed, gel composition and silicon source influence the morphology of MOR. {yields} Low silica concentration results in MOR with high c/b aspect ratio. {yields} Novel nano fiber-like MOR with c/b aspect ratio of 89 was organic-free synthesized. {yields} The morphology of MOR influences its mesopore property and thermal stability. -- Abstract: A series of mordenite zeolites with different morphologies were synthesized via a facile organic-free hydrothermal route, and characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectrometer and N{sub 2} adsorption-desorption techniques. Influences of synthetic parameters, including seed crystal, silicon precursor, SiO{sub 2}/Al{sub 2}O{sub 3}, Na{sub 2}O/SiO{sub 2} and H{sub 2}O/SiO{sub 2}, on mordenite crystallization were investigated systematically. It was found that mordenite zeolites with various morphologies, such as fiber-like, rod-like, prism-like and needle-like ones could be synthesized in control. Especially, novel nano fiber-like MOR crystals with high c/b aspect ratio were prepared from low silica concentration system, which was manipulated by using small initial SiO{sub 2}/Al{sub 2}O{sub 3} ratio, large H{sub 2}O/SiO{sub 2} and silicon source with slow dissolution rate. Moreover, mordenite samples with various morphologies exhibited different mesopore property and thermal stability.

36 MATERIALS SCIENCE↗