Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Contrasting Chemical Kinetic Parameters for Near In‐Service‐Temperature Aging and High‐Temperature Thermal Decomposition of Triaminotrinitrobenzene Formulations

Triaminotrinitrobenzene-based high explosives such as LX-17 offer high energy density and exceptional safety, yet their long-term aging behavior at low temperatures remains poorly understood. In this study, several legacy and new production lots of LX-17 were subjected to accelerated aging experiments below 100°C, during which the formation rate of the initial degradation product, monofurazan (F1), was monitored. Kinetic analysis was performed using a sample-age-aware computational approach, yielding activation energy estimates of 82–91 kJ mol −1 for the low-temperature initiation step—markedly lower than the ∼200 kJ mol −1 associated with high-temperature thermal decomposition. Extrapolation from established cookoff models supports the conclusion that the dominant degradation mechanism at low temperatures differs from that at high temperatures. In conclusion, our results provide a unified kinetic framework that bridges the gap between in-service conditions and high-temperature damage.

Chemistry - Chemical explosives↗
DOE OSTI2021

Controlled current-rate AC flash sintering of uranium dioxide

Uranium dioxide (UO2) pellets with controlled microstructures were densified up to 93.4% of their theoretical density in less than 25 minutes at a furnace temperature of 873 K, utilizing controlled current-rate alternating current (AC) flash sintering (FS). Using this AC-FS method it was possible to control the sintering rate and thermal gradients, resulting in dense pellets with no appreciable hourglassing and good mechanical integrity. Moreover, the apparent sintering activation energy for FS and for conventionally sintered samples was estimated to be 108 kJ mol -1 and 380 kJ mol -1 , respectively using the master sintering curve method. The apparent activation energy for FS was remarkably close to those reported in the literature for spark plasma sintering of UO 2 . Furthermore, both these field assisted sintering methods utilize fast heating rates and electrical effects that are likely enhancing the grain boundary diffusion mechanism. Finally controlled current-rate AC-FS has been demonstrated as a technological advancement, capable of producing ceramic nuclear fuels in a fraction of the conventional processing time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Evaluating the risk of data loss due to particle radiation damage in a DNA data storage system

DNA data storage is a potential alternative to magnetic tape for archival storage purposes, promising substantial gains in information density. Critical to the success of DNA as a storage media is an understanding of the role of environmental factors on the longevity of the stored information. In this paper, we evaluate the effect of exposure to ionizing particle radiation, a cause of data loss in traditional magnetic media, on the longevity of data in DNA data storage pools. We develop a mass action kinetics model to estimate the rate of damage accumulation in DNA strands due to neutron interactions with both nucleotides and residual water molecules, then utilize the model to evaluate the effect several design parameters of a typical DNA data storage scheme have on expected data longevity. Finally, we experimentally validate our model by exposing dried DNA samples to different levels of neutron irradiation and analyzing the resulting error profile. Our results show that particle radiation is not a significant contributor to data loss in DNA data storage pools under typical storage conditions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Informed total-error-minimizing priors: Interpretable cosmological parameter constraints despite complex nuisance effects

While Bayesian inference techniques are standard in cosmological analyses, it is common to interpret resulting parameter constraints with a frequentist intuition. This intuition can fail, for example, when marginalizing high-dimensional parameter spaces onto subsets of parameters, because of what has come to be known as projection effects or prior volume effects. We present the method of informed total-error-minimizing (ITEM) priors to address this problem. An ITEM prior is a prior distribution on a set of nuisance parameters, such as those describing astrophysical or calibration systematics, intended to enforce the validity of a frequentist interpretation of the posterior constraints derived for a set of target parameters (e.g., cosmological parameters). Our method works as follows. For a set of plausible nuisance realizations, we generate target parameter posteriors using several different candidate priors for the nuisance parameters. We reject candidate priors that do not accomplish the minimum requirements of bias (of point estimates) and coverage (of confidence regions among a set of noisy realizations of the data) for the target parameters on one or more of the plausible nuisance realizations. Of the priors that survive this cut, we select the ITEM prior as the one that minimizes the total error of the marginalized posteriors of the target parameters. As a proof of concept, we applied our method to the density split statistics measured in Dark Energy Survey Year 1 data. We demonstrate that the ITEM priors substantially reduce prior volume effects that otherwise arise and that they allow for sharpened yet robust constraints on the parameters of interest.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

DANTE as a primary temperature diagnostic for the NIF iron opacity campaign

The Opacity Platform on the National Ignition Facility (NIF) has been developed to measure iron opacities at varying densities and temperatures relevant to the solar interior and to verify recent experimental results obtained at the Sandia Z-machine, that diverge from theory. The first set of NIF experiments collected iron opacity data at ∼150 eV to 160 eV and an electron density of ∼7 × 1021 cm−3, with a goal to study temperatures up to ∼210 eV, with electron densities of up to ∼3 × 1022 cm−3. Among several techniques used to infer the temperature of the heated Fe sample, the absolutely calibrated DANTE-2 filtered diode array routinely provides measurements of the hohlraum conditions near the sample. However, the DANTE-2 temperatures are consistently low compared to pre-shot LASNEX simulations for a range of laser drive energies. We have re-evaluated the estimated uncertainty in the reported DANTE-2 temperatures and also the error generated by varying channel participation in the data analysis. An uncertainty of ±5% or better can be achieved with appropriate spectral coverage, channel participation, and metrology of the viewing slot.

Opachich, Y. P. (ORCID:0000000314323989)↗
DOE OSTI2020

A search for the lenses in the Herschel Bright Sources (HerBS) sample

ABSTRACT Verifying that sub-mm galaxies are gravitationally lensed requires time-expensive observations with oversubscribed high-resolution observatories. Here, we aim to strengthen the evidence of gravitational lensing within the Herschel Bright Sources (HerBS) by cross-comparing their positions to optical (SDSS) and near-infrared (VIKING) surveys, in order to search for the foreground lensing galaxy candidates. Resolved observations of the brightest HerBS sources have already shown that most are lensed, and a galaxy evolution model predicts that ∼76 per cent of the total HerBS sources are lensed, although with the SDSS survey we are only able to identify the likely foreground lenses for 25 per cent of the sources. With the near-infrared VIKING survey, however, we are able to identify the likely foreground lenses for 57 per cent of the sources, and we estimate that 82 per cent of the HerBS sources have lenses on the VIKING images even if we cannot identify the lens in every case. We find that the angular offsets between lens and Herschel source are larger than that expected if the lensing is done by individual galaxies. We also find that the fraction of HerBS sources that are lensed falls with decreasing 500-micron flux density, which is expected from the galaxy evolution model. Finally, we apply our statistical VIKING cross-identification to the entire Herschel-ATLAS catalogue, where we also find that the number of lensed sources falls with decreasing 500-micron flux density.

Bakx, Tom J. L. C.↗
DOE OSTI2021

Extreme high-field superconductivity in thin Re films

We report the high-field superconducting properties of thin, disordered Re films via magnetotransport and tunneling density of states measurements. Films with thicknesses in the range of 9 to 3 nm had normal-state sheet resistances of ~0.2 kΩ to ~1 kΩ and corresponding transition temperatures in the range of 6 to 3 K. Tunneling spectra were consistent with those of a moderate coupling BCS superconductor. Notwithstanding these unremarkable superconducting properties, the films exhibited an extraordinarily high upper critical field. Here, we estimate their zero temperature H c2 to be more than twice the Pauli limit. Indeed, in 6-nm samples the estimated reduced critical field H c2 /T c ~ 5.6T/K is among the highest reported for any elemental superconductor. Although the sheet resistances of the films were well below the quantum resistance R Q = h/4e 2 , their H c2 's approached the theoretical upper limit of a strongly disordered superconductor for which k F ℓ ~ 1.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

AlignOT: An Optimal Transport Based Algorithm for Fast 3D Alignment With Applications to Cryogenic Electron Microscopy Density Maps

Aligning electron density maps from Cryogenic electron microscopy (cryo-EM) is a first key step for studying multiple conformations of a biomolecule. As this step remains costly and challenging, with standard alignment tools being potentially stuck in local minima, we propose here a new procedure, called AlignOT, which relies on the use of computational optimal transport (OT) to align EM maps in 3D space. By embedding a fast estimation of OT maps within a stochastic gradient descent algorithm, our method searches for a rotation that minimizes the Wasserstein distance between two maps, represented as point clouds. Here, we quantify the impact of various parameters on the precision and accuracy of the alignment, and show that AlignOT can outperform the standard local alignment methods, with an increased range of rotation angles leading to proper alignment. We further benchmark AlignOT on various pairs of experimental maps, which account for different types of conformational heterogeneities and geometric properties. As our experiments show good performance, we anticipate that our method can be broadly applied to align 3D EM maps.

3D alignment↗
DOE OSTI2024

The linear thermal expansion of 11 polymers from approximately -100 to +100°C

The linear coefficient of thermal expansion has been measured for 11 polymers from approximately -100 to +100°C. The polymers tested were poly(tetrafluoroethylene) (PTFE), poly(chlorotrifluoroethylene) (PCTFE), three polyethylenes; high density (HDPE), ultra-high molecular weight (UHMWPE) and cross-linked (XPE). The commercial fluoropolymers Kel-F 800 (also known as FK-800®) and THV 500®were tested together with samples of poly(ether ether ketone) (PEEK), poly(methyl methyl methacrylate) (PMMA), polycarbonate (PC) and poly(vinylidene fluoride) (PVDF). Polynomial fits were made to the data over appropriate ranges allowing the expansivity (α) to be estimated.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Density functional theory calculation of helium segregation and decohesion effect in W110/Ni111 interphase boundary

Density functional theory (DFT) is employed to study the preferential distribution and decohesion effect of He in a W-NiFe composite consisting of W particles embedded in an Ni-based solid solution matrix. A slab containing {110}<100>W//{111}<110>Ni interface is employed as a surrogate model for the W-NiFe system. Firstly, the fracture energy of the W/Ni interphase boundary (IB) (4.37 J/m 2 ) is higher than the cleavage energy of Ni{111} (3.82 J/m^2) and lower than the cleavage energy of W{110} (6.60 J/m 2 ). The comparison shows that the cohesion of the IB is stronger than the Ni{111} planes that are away from the IB. However, the cohesion between the Ni{111} planes adjacent to the IB is found to be the weakest in this system, with a cleavage energy of 3.11 J/m 2 . Subsequently, formation energy of He is calculated in the Ni slab, W slab, and various interstitial sites in the IB. The DFT calculations show that He is significantly more stable in Ni than in W, by about 1.75 eV. Interestingly, He does not prefer to segregate at the IB as compared to bulk Ni. Nevertheless, it prefers to segregate to the region between the Ni{111} planes adjacent to the IB, and decreases the cohesion of the already weakest region. Based on an estimated amount of He gas production in 5 years under first wall neutron irradiation (neutron flux of 1.04x10 15 n/cm 2 /s), the He will decrease the cleavage energy of the weakest region by 21.2%, 15.4%, and 12.2% at 800, 1000, and 1200 C, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Assessment of habitat‐specific competition for oral rabies vaccine baits between raccoons and opossums

Abstract Throughout the eastern United States, the National Rabies Management Program (NRMP) distributes oral rabies vaccine (ORV) baits to manage rabies virus circulation in raccoon ( Procyon lotor ) populations. The consumption of vaccine baits by non‐target species including Virginia opossums ( Didelphis virginiana ) may reduce the effectiveness of ORV programs, but competition for baits remains poorly quantified in many areas of the southeastern United States. We distributed placebo ORV baits injected with a biomarker across 4 land cover types (bottomland hardwood, upland pine, riparian, isolated wetland) on the Savannah River Site in South Carolina, USA, 2017–2019. We then trapped and collected whiskers from 247 raccoons and 78 opossums to assess biomarker presence using fluorescent microscopy. Our data revealed greater bait uptake probability by raccoons (estimated x̅ = 0.30, 95% CI = 0.19–0.44) compared to opossums (estimated x̅ = 0.11, 95% CI = 0.05–0.23) across all cover types surveyed. Probability of bait consumption was not affected by cover type or the abundance of raccoons or opossums. Among raccoons, males were more likely to consume baits than females (estimated x̅ = 0.28, 95% CI = 0.17–0.44 for males and 0.14, 95% CI = 0.05–0.31 for females) and probability of consumption increased by 0.08 with each additional day trapped during the 10‐day trapping session. Uptake rates for raccoons were relatively low compared to other studies and not influenced by competition with opossums. These low consumption rates indicate that additional research addressing the roles of baiting season, bait density, and resource selection will be important to maximize ORV bait uptake by target species in these southeastern landscapes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

THERMAL ANALYSIS AND DESIGN OF SELF-HEATING MOLDS USING LARGE-SCALE ADDITIVE MANUFACTURING FOR OUT-OF-AUTOCLAVE APPLICATIONS

Autoclave processing is a commonly used state-of-the-art fiber-reinforced composite manufacturing technology, albeit high capital cost, long cycle times and high energy consumption. Alternatively, out-of-autoclave processing reduces the initial and operating costs while producing composite structures with similar quality as that of autoclave parts. Additive Manufacturing (AM) the scaled-up molds for out-of-autoclave process using carbon fiber (CF) reinforced composite offers design flexibility, enhanced mechanical, and thermal properties in addition to reduction in weight and cost. However, heating of these molds using an oven is still expensive and necessitates an energy-efficient heating process. In this study, resistive heating through heating elements embedded within fiber reinforced composite molds is used as an efficient heating mechanism. The goal is to design wire embeddings and determine the optimal heat flux density to achieve a target uniform temperature of 1000C across the mold surface. To this end, numerical analyses were performed to evaluate the temperature distribution across the composite mold surface for a given wire placement and mold configuration. Constant thermal properties of the 20 wt.% short CF reinforced acrylonitrile butadiene styrene (ABS) were used in the thermal analysis. Time taken to reach the steady state temperature was also estimated. Design guidelines for wire embeddings were included to enable efficient manufacturing of fiber-reinforced composites through out-of-autoclave molds.

Pokkalla, Deepak↗
DOE OSTI2022

Between Harmonic Crystal and Glass: Solids with Dimpled Potential-Energy Surfaces Having Multiple Local Energy Minima

Solids with dimpled potential-energy surfaces are ubiquitous in nature and, typically, exhibit structural (elastic or phonon) instabilities. Dimpled potentials are not harmonic; thus, the conventional quasiharmonic approximation at finite temperatures fails to describe anharmonic vibrations in such solids. At sufficiently high temperatures, their crystal structure is stabilized by entropy; in this phase, a diffraction pattern of a periodic crystal is combined with vibrational properties of a phonon glass. As temperature is lowered, the solid undergoes a symmetry-breaking transition and transforms into a lower-symmetry phase with lower lattice entropy. Here, we identify specific features in the potential-energy surface that lead to such polymorphic behavior; we establish reliable estimates for the relative energies and temperatures associated with the anharmonic vibrations and the solid–solid symmetry-breaking phase transitions. We show that computational phonon methods can be applied to address anharmonic vibrations in a polymorphic solid at fixed temperature. To illustrate the ubiquity of this class of materials, we present a range of examples (elemental metals, a shape-memory alloy, and a layered charge-density-wave system); we show that our theoretical predictions compare well with known experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Crystal growth, physical and optical properties of TlSr 2 Cl 5 and TlSr 2 Br 5

Small diameter (Ø 16 mm) TlSr 2 Cl 5 and TlSr 2 Br 5 crystals were grown by the Vertical Bridgman method. X-ray diffraction measurements show that both have the monoclinic crystal structure with space group P21/c. TlSr 2 Cl 5 and TlSr 2 Br 5 have a density of 4.14 g/cm 3 and 5.03 g/cm 3 , respectively. The effective Z of TlSr 2 Cl 5 and TlSr 2 Br 5 is 63.7 and 58.6, respectively. Radioluminescence spectra of TlSr 2 Cl 5 and TlSr 2 Br 5 feature a broad emission band peaking at 440 and 445 nm, respectively. As a result the light yield of TlSr 2 Cl 5 and TlSr 2 Br 5 was estimated to be 17,000 and 45,000 ph/MeV, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Prediction of Transition-State Scaling Relationships and Universal Transition-State Vibrational and Entropic Correlations for Dehydrogenations

Linear scaling relationships (LSRs) and Brønsted–Evans–Polanyi (BEP) or transition-state scaling (TSS) relations aid with the prediction of electronic energies. However, temperature effects and pre-exponentials are often taken as constants across metal surfaces or a homologous series. Vibrational scaling relationships (VSRs) offer a way to determine such parameters. Transition-state VSRs (TSVSRs) between local minima and transition states of AH X (A = C, N, O) surface diffusions correlate with BEP relations and broaden to thermochemical property scaling. Using density functional theory, we extend TSVSRs to AHX dehydrogenation reactions on transition-metal surfaces, relating vibrational modes of local minima to transition states. We first predict the slopes of the TSS relations by incorporating bond angles using the Slater–Koster structure factors and hybridization through crystal orbital overlap population analysis and energy overlap integrals between adsorbates and metal surfaces. Additionally, we uncover universal thermochemical property scaling, enabling the estimation of entropies and temperature corrections to enthalpies across a homologous series. Here, we demonstrate both significant vibrational corrections in reactions with low intrinsic electronic barriers and considerable variation in the pre-exponential of a simple dehydrogenation reaction across metals and AH X adsorbates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Two rest-frame wavelength measurements of galaxy sizes at z < 1: the evolutionary effects of emerging bulges and quenched newcomers

We analyse the size evolution of 16 000 star-forming galaxies (SFGs) and 5000 quiescent galaxies (QGs) with mass M * > 10 9.5 M ⊙ at 0.1 < z < 0.9 from the COSMOS field using deep CLAUDS + HSC imaging in two rest-frame wavelengths, 3000 Å (UV light) and 5000 Å (visible light). With half-light radius (R e ) as proxy for size, SFGs at characteristic mass M 0 = 5 × 10 10 M ⊙ grow by 20 per cent (30 per cent) in UV (visible) light since z ~ 1 and the strength of their size evolution increases with stellar mass. After accounting for mass growth due to star formation, we estimate that SFGs grow by 75 per cent in all stellar mass bins and in both rest-frame wavelengths. Redder SFGs are more massive, smaller and more concentrated than bluer SFGs and the fraction of red SFGs increases with time. These results point to the emergence of bulges as the dominant mechanism for the average size growth of SFGs. We find two threshold values for the stellar mass density within central 1 kpc (Σ 1 ): all SFGs with log Σ 1 ≳ 9 are red and only QGs have log Σ 1 ≳ 9.7. The size of M * = M 0 QGs grows by 50 per cent (110 per cent) in the UV (visible) light. Up to $\sim 20~{{\rm per\,cent}}$ of this increase in size of massive QGs is due to newcomers (recently quenched galaxies). However, newcomers cannot explain the observed pace in the size growth of QGs; that trend has to be dominated by processes affecting individual galaxies, such as minor mergers and accretion.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Implementation of a self-consistent slab model of bilayer structure in the SasView suite

Slab models are simple and useful structural descriptions which have long been used to describe lyotropic lamellar phases, such as lipid bilayers. Typically, slab models assume a midline symmetry and break a bilayer structure into three pieces, a central solvent-free core and two symmetric outer layers composed of the soluble portion of the amphiphile and associated solvent. This breakdown matches reasonably well to the distribution of neutron scattering length density and therefore is a convenient and common approach for the treatment of small-angle scattering data. Here, an implementation of this model within the SasView software suite is reported. The implementation is intended to provide physical consistency through the area per amphiphile molecule and number of solvent molecules included within the solvent-exposed outer layer. The proper use of this model requires knowledge of (or good estimates for) the amphiphile and solvent molecule volume and atomic composition, ultimately providing a self-consistent data treatment with only two free parameters: the lateral area per amphiphile molecule and the number of solvent molecules included in the outer region per amphiphile molecule. Here, the use of this code is demonstrated in the fitting of standard lipid bilayer data sets, obtaining structural parameters consistent with prior literature and illustrating the typical and ideal cases of fitting for neutron scattering data obtained using single or multiple contrast conditions. While demonstrated here for lipid bilayers, this model is intended for general application to block copolymers, surfactants, and other lyotropic lamellar phase structures for which a slab model is able to reasonably estimate the neutron scattering length density/electron-density profile of inner and outer layers of the lamellae.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exploring limitations in the induced polarization versus surface conductivity relationship in the case of wetland soils

Recent induced polarization studies suggest that the real part of surface conductivity (σ' surf ) scales linearly with the imaginary conductivity (σ'' = σ'' surf ) or normalized chargeability (Mn) for a range of soil types. The coefficients of this relationship l and l_Mn ( l = σ''/σ' surf or l_Mn = Mn/σ' surf ) allow the separation of the surface and electrolytic conductivities from the bulk conductivity. However, the dependence of these constants on varying soil physicochemical properties, including under unsaturated conditions, is yet to be assessed. Using estimates of σ' surf from 18 undisturbed soil samples from a restored wetland and σ'' measured over a frequency range of 0.01 Hz to 10 kHz, the σ' surf and σ'' were compared with the laboratory measurements of soil properties. Also, l and l_Mn were calculated for each soil sample and regressed them against the soil properties. We find an apparent dependence of l on soil texture, bulk density, organic matter, and moisture contents, with coefficients of determination (R 2 ) ranging from 0.5 to 0.65 at low frequencies (e.g., 1 Hz) but not at high frequencies (e.g., 936 Hz). This dependence of l on soil texture results from the insensitivity of σ'' at low frequency to σ' surf and, by implication, to the soil properties controlling σ' surf . In contrast, l_Mn indicates no correlation with the soil properties because Mn is linearly correlated with σ' surf and correlated with the soil properties controlling σ' surf . Finally, our results call for caution on the application of σ'' at a single frequency as a proxy of σ' surf because σ'' is not necessarily correlated with σ' surf across all soil types. Although using l_Mn derived from multifrequency measurements overcomes this limitation, field acquisition of spectral information (e.g., up to 1000 Hz) remains a challenge.

54 ENVIRONMENTAL SCIENCES↗