Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZIRCONIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Raman effect, structural and dielectric properties of sol-gel synthesized polycrystalline GaFe{sub 1-x}Zr{sub x}O{sub 3} (0≤x≤0.15)

Polycrystalline ceramic samples of Zirconium (Zr)-doped GaFeO{sub 3} (GaFe{sub 1-x}Zr{sub x}O{sub 3}) were studied using powder X-ray diffraction, complex impedance spectroscopy and Raman spectroscopic measurements to understand the effect of Zr doping on the structural and dielectric properties. The samples with varying Zr content were prepared by Sol-Gel method. X-ray data analysis confirmed the formation of single phase material without formation of any secondary phases and all are crystallized in Pc2{sub 1}n orthorhombic symmetry. Rietveld refinement of the X-ray data suggested an increase in the lattice constants due to size effect and decreases on x = 0.15 due to the effect of change in interplanner spacing. Impedance studies on the samples showed that the dielectric constant increases while loss tangent decrease as the Zr content increases. Raman scattering on GaFe{sub 1-x}Zr{sub x}O{sub 3} (x = 0, 0.05, 0.10, & 0.15) used to understand the composition dependence on phonon modes at room temperature. On Zr doping, Raman modes frequencies shifts to lower energies consistent with the X-ray data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of freestanding ZrO{sub 2} nanotubes for Cr(VI) removal

Freestanding ZrO{sub 2} nanotubes (ZNTs) were produced using a simple anodization method in fluorinated ethylene glycol electrolyte containing 1 ml 1 M K{sub 2}CO{sub 3}. The pH of the bath was kept constant at 8. The potassium carbonate (K{sub 2}CO{sub 3}) was added into electrolyte to promote the detachment of anodic ZrO{sub 2} film from the underlying zirconium (Zr) substrate. The poor adherence of ZNTs layer was due to generation of CO{sub 2} gas that was thought to occur between metal|oxide interfaces. The effect of anodization voltages towards the detachment of ZNTs layer was systematically studied at 20 V, 40 V, 50 V and 60 V for 1 hour. The formation of CO{sub 2} gas is a function of anodization voltage, in which at 60 V, a good anodic film separation seen due to higher formation of CO{sub 2} gas. A preliminary study shown the capability of ZNTs in removing 5 ppm of Cr(VI) aqueous solution under illumination of UV light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cluster-assembled cubic zirconia films with tunable and stable nanoscale morphology against thermal annealing

Nanostructured zirconium dioxide (zirconia) films are very promising for catalysis and biotechnological applications: a precise control of the interfacial properties of the material at different length scales and, in particular, at the nanoscale, is therefore necessary. Here, we present the characterization of cluster-assembled zirconia films produced by supersonic cluster beam deposition possessing cubic structure at room temperature and controlled nanoscale morphology. We characterized the effect of thermal annealing in reducing and oxidizing conditions on the crystalline structure, grain dimensions, and topography. We highlight the mechanisms of film growth and phase transitions, which determine the observed interfacial morphological properties and their resilience against thermal treatments.

36 MATERIALS SCIENCE↗

Inelastic neutron scattering study of the hydrogenated (Zr{sub 55}Cu{sub 30}Ni{sub 5}Al{sub 10}){sub 99}Y{sub 1} bulk metallic glass

The lattice dynamics of both as-charged and room-temperature-aged, hydrogenated bulk metallic glasses (BMGs) with the stoichiometry of (Zr{sub 55}Cu{sub 30}Ni{sub 5}Al{sub 10}){sub 99}Y{sub 1} have been investigated by inelastic neutron scattering at 4 K. The vibrational density of states of dissolved hydrogen atoms in the as-charged BMG shows a broad band maximized at {approx}135 meV. Three months of room-temperature aging caused this band to narrow somewhat, losing intensity at both lower and higher energies. The results suggest that hydrogen atoms preferably occupy the interstitial tetrahedral-like t sites comprised of four Zr atoms, with a local atomic arrangement similar to that of {delta}-zirconium hydride. At higher hydrogen loadings, hydrogen atoms can also occupy octahedral-like and/or more Zr-deficient tetrahedral-like o sites. The spectral differences between the as-charged and aged specimens and accompanying Vickers hardness measurements suggested that around two-thirds of the hydrogen atoms in the as-charged specimen were trapped in the strongly binding t sites and relatively immobile at room temperature, while the remaining one-third occupied the more weakly binding o-sites and disappeared from the specimen upon aging. These latter sites most likely play a crucial role in the diffusion of hydrogen in BMGs at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and properties of ZrN coatings deposited by high power impulse magnetron sputtering technology

Monolayer ZrN coatings were deposited exclusively by the novel high power impulse magnetron sputtering (HIPIMS) technology in an industrial scale physical vapour deposition (PVD) machine (HTC-1000-4 target system). Coatings were deposited on 1 {mu}m polished M2 high speed steel, on 304L stainless steel (SS), and on Si (100) specimens. Prior to deposition, HIPIMS plasma sustained on a zirconium (Zr) target was utilized to pretreat the specimens. Coatings were deposited at 400 deg. C in a mixed N{sub 2} and Ar atmosphere using 2 magnetrons in HIPIMS mode and at three different substrate bias voltages (U{sub bias}) keeping all other process parameters constant. The thicknesses of the coatings measured by the ball cratering technique were in the ranges of 1.84, 1.96, and 2.13 {mu}m at bias voltages of -95, -75, and -65 V, respectively, where the difference in thickness can be attributed to the resputtering effect. X-ray diffraction experiments on SS specimens revealed a dominating 111 texture for all three coatings irrespective of the bias voltage. Cross-sectional transmission electron microscopy revealed extremely dense coating structures at all bias voltages, similar to the transition zone structure (zone T) reported by Thornton. The -95 bias voltage coatings appeared extremely smooth on the top and with no dome shaped structures often associated with low ion bombardment during deposition. HIPIMS pretreatment leads to high adhesion (L{sub C}) of the coatings to the substrate. A continuous ductile perforation of the coating was observed at progressive loads greater than 65 N; however, no spallation of the coating was observed up to loads of 100 N. High values of hardness (40.4 GPa), Young's modulus (424 GPa), and compressive stress (10 GPa) were recorded for coatings deposited at -95 BV. The hardness and internal stress of the coating were found increasing with more negative bias voltages. All the coatings exhibited high dry sliding wear resistance (K{sub C}) in the range 6x10{sup -15} m{sup 3} N{sup -1} m{sup -1}. Cross-sectional transmission electron microscopy and atomic force microscopy analyses have been used to study the effect of ion bombardment obtained from HIPIMS on the structure of the coatings.

36 MATERIALS SCIENCE↗

Modeling precursor diffusion and reaction of atomic layer deposition in porous structures

Atomic layer deposition (ALD) is a technique for depositing thin films of materials with a precise thickness control and uniformity using the self-limitation of the underlying reactions. Usually, it is difficult to predict the result of the ALD process for given external parameters, e.g., the precursor exposure time or the size of the precursor molecules. Therefore, a deeper insight into ALD by modeling the process is needed to improve process control and to achieve more economical coatings. In this paper, a detailed, microscopic approach based on the model developed by Yanguas-Gil and Elam is presented and additionally compared with the experiment. Precursor diffusion and second-order reaction kinetics are combined to identify the influence of the porous substrate's microstructural parameters and the influence of precursor properties on the coating. The thickness of the deposited film is calculated for different depths inside the porous structure in relation to the precursor exposure time, the precursor vapor pressure, and other parameters. Good agreement with experimental results was obtained for ALD zirconiumdioxide (ZrO{sub 2}) films using the precursors tetrakis(ethylmethylamido)zirconium and O{sub 2}. The derivation can be adjusted to describe other features of ALD processes, e.g., precursor and reactive site losses, different growth modes, pore size reduction, and surface diffusion.

36 MATERIALS SCIENCE↗

X-Ray Photoelectron Spectroscopy of Stabilized Zirconia Films with Embedded Au Nanoparticles Formed under Irradiation with Gold Ions

Nanosized films of stabilized zirconia with Au nanoparticles formed by implanting Au ions are studied by X-ray photoelectron spectroscopy and transmission electron microscopy. The effect of irradiation of films with Au ions and postimplantation annealing on the distribution of chemical elements and zirconium- containing ZrO{sub x} compounds over the depth of the films is studied. Based on the data on the dimensional shift of the Au 4 f photoelectron line, the average value of the nanoparticle size is determined.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical, Mechanical, and Thermal Properties of Free-Standing MoSi{sub 2}N{sub x} and ZrSi{sub 2}N{sub y} Nanocomposite Films

The optical, mechanical, and thermal properties of free-standing structures based on nitrided molybdenum and zirconium silicides have been studied. It has been shown that silicide nitriding considerably improves the thermal stability of films. While as-prepared amorphous MoSi{sub 2} and ZrSi{sub 2} films crystallize in the interval 330–370°C, nitriding of films has made it possible to increase their working temperatures in vacuum to 600–700°C (at least, for x ≥ 0.25, y ≥ 1.3). Tensile tests have shown that the ultimate strength of MoSi{sub 2}N{sub x} films (0 ≤ x ≤ 0.55) depends on nitrogen content only slightly. Comparison between the properties of MoSi{sub 2}N{sub x} and ZrSi{sub 2}N{sub y} films magnetron-sputtered at the same partial pressure of nitrogen has demonstrated that with transmission coefficients of films at a wavelength of 13.5 nm being close to each other, ZrSi{sub 2} films are more effective as protection coatings (they are less prone to oxidation and more degradation-resistant).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural evolution of Q12{sup TM} alloy irradiated in PWRs and comparison with other Zr base alloys - 2016-0061

Based on the M5{sup R}* alloy metallurgy, the Q12{sup TM} alloy (Zr-1Nb-0.5Sn-0.1Fe) was developed by AREVA NP for structural components, with ultra-low tin addition and slightly increased iron content. The behavior of this alloy was tested under irradiation in a pressurized water reactor (PWR) and has shown improvement in irradiation creep strength and similar free growth compared with M5. This paper provides results on dimensional stability and details the microstructural evolution of the Q12 alloy under neutron irradiation in PWRs. The Q12 microstructural evolution under irradiation was studied for fast neutron fluences up to 13 X 10{sup 25} n/m{sup 2} (E>1 MeV) with analytical transmission electron microscopy observations. We focused on radiation-enhanced needle-like particles, Laves phases, and the linear density of -component loops. These results are compared with other quaternary zirconium-niobium-tin-iron alloys and with M5. All these results allow a general discussion about microstructural evolution and behavior under irradiation of quaternary-type alloys compared to M5 alloy. This study, in agreement with previous works on Zr-1Nb and quaternary alloys, seems to show that increasing the iron content with the presence of niobium and tin will decrease the -component loop linear density and delay the growth breakaway. (authors)

36 MATERIALS SCIENCE↗

The Synthesis, Structures, and Chemical Properties of Macrocyclic Ligands Covalently Bonded into Layered Arrays

In this part of the proposal we have concentrated on the surface functionalization of α-zirconium phosphate of composition Zr(O3POH)2•H2O. It is a layered compound that can be prepared as particles as small as 30 nm to single crystals in the range of cm. This compound is an ion exchanger with a capacity of 6.64 meq per gram. It finds use as a catalyst, proton conductor, sensors, biosensors, in kidney dialysis and drug delivery. By functionalizing the surface additional uses are contemplated as will be described. The layers consist of the metal, with 4+ charge, that is positioned slightly above and below the mean layer plane and bridged by three of the four phosphate oxygens. The remaining POH groups point into the interlayer space creating double rows of POH groups but single arrays on the surface layers. The surface groups are reactive and we were able to bond silanes, isocyanates, epoxides, acrylates ` and phosphates to the surface POH groups. The layers are easily exfoliated or filled with ions by ion exchange or molecules by intercalation reactions. Highlights of our work include, in addition to direct functionalization of the surfaces, replacement of the protons on the surface with ions of different charge. This allows us to bond phosphates, biophosphates, phosphonic acids and alcohols to the surface. By variation of the ion charge of the ions that replace the surface protons, different surface structures are obtained. We have already shown that polymer fillers, catalysts and Janus particles may be prepared. The combination of surface functionalization with the ability to insert molecules and ions between the layers allow for a rich development of numerous useful other applications as well as nano-surface chemistry.

36 MATERIALS SCIENCE↗

Selection of Nuclear Fuel for TREAT: UO 2 vs U 3 O 8

The Transient Reactor Test (TREAT) that resides at the Materials and Fuels Complex (MFC) at Idaho National Laboratory (INL), first achieved criticality in 1959, and successfully performed many transient tests on nuclear fuel until 1994 when its operations were suspended. Resumption of operations at TREAT was approved in February 2014 to meet the U.S. Department of Energy (DOE) Office of Nuclear Energy’s objectives in transient testing of nuclear fuels. The National Nuclear Security Administration’s is converting TREAT from its existing highly enriched uranium (HEU) core to a new core containing low enriched uranium (LEU) (i.e., U-235< 20% by weight). The TREAT Conversion project is currently progressing with conceptual design phase activities. Dimensional stability of the fuel element assemblies, predictable fuel can oxidation and sufficient heat conductivity by the fuel blocks are some of the critical performance requirements of the new LEU fuel. Furthermore, to enable the design team to design fuel block and can specifications, it is amongst the objectives to evaluate TREAT LEU fuel and cladding material’s chemical interaction. This information is important to understand the viability of Zr-based alloys and fuel characteristics for the fabrication of the TREAT LEU fuel and cladding. Also, it is very important to make the right decision on what type of nuclear fuel will be used at TREAT. In particular, one has to consider different oxides of uranium, and most importantly, UO 2 vs U 3 O 8 . In this report, the results are documented pertaining to the choice mentioned above (UO 2 vs U 3 O 8 ). The conclusion in favor of using UO 2 was made based on the analysis of historical data, up-to-date literature, and self-consistent calculations of phase equilibria and thermodynamic properties in the U-O and U-O-C systems. The report is organized as follows. First, the criteria that were used to make the choice are analyzed. Secondly, existing historical data and current literature were reviewed. This analysis was supplemented by the construction and examination of the U-O and U-O-C phase diagrams at pressure close to negligent, thereby mimicking the conditions in which nuclear fuel is supposed to function inside the zirconium-based cladding in the reactor. Finally, our conclusion in favor of the UO 2 down selection was summarized and explained in the last Section of this document.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Computational and Experimental Studies of Microstructure-Scale Porosity in Metallic Fuels for Improved Gas Swelling Behavior

This proposal will investigate the stability of bimodal pore size distributions in metallic uranium and uranium-zirconium alloys during sintering and re-sintering annealing treatments. The project will utilize both computational and experimental approaches. The computational approach includes both Molecular Dynamics simulations to determine the self-diffusion coefficients in pure U and U-Zr alloys in single crystals, grain boundaries, and free surfaces, as well as calculations of grain boundary and free surface interfacial energies. Phase-field simulations using MOOSE will be conducted to study pore and grain structure evolution in microstructures with bimodal pore size distributions. Experiments will also be performed to validate the simulations, and measure the time-dependent densification of bimodal porous compacts.

36 MATERIALS SCIENCE↗

Melting temperatures of the ZrO{sub 2}-MOX system

Severe accidents occurred at the Fukushima Daiichi Nuclear Power Plant Units 1-3 on March 11, 2011. MOX fuels were loaded in the Unit 3. For the thermal analysis of the severe accident, melting temperature and phase state of MOX corium were investigated. The simulated coriums were prepared from 4%Pu-containing MOX, 8%Pu-containing MOX and ZrO{sub 2}. Then X-ray diffraction, density and melting temperature measurements were carried out as a function of zirconium and plutonium contents. The cubic phase was observed in the 25%Zr-containing corium and the tetragonal phase was observed in the 50% and 75%Zr-containing coria. The lattice parameter and density monotonically changed with Pu content. Melting temperature increased with increasing Pu content; melting temperature were estimated to be 2932 K for 4%Pu MOX corium and 3012 K for 8%Pu MOX corium in the 25%ZrO{sub 2}-MOX system. The lowest melting temperature was observed for 50%Zr-containing corium. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Overview of the multifaceted activities towards development and deployment of nuclear-grade FeCrAl alloys

A large effort is underway under the leadership of US DOE Fuel Cycle Research program to develop advanced FeCrAl alloys as accident tolerant fuel (ATF) cladding to replace Zr-based alloys in light water reactors. The primary motivation is the excellent oxidation resistance of these alloys in high-temperature steam environments right up to their melting point (roughly three orders of magnitude slower oxidation kinetics than zirconium). A multifaceted effort is ongoing to rapidly advance FeCrAl alloys as a mature ATF concept. The activities span the broad spectrum of alloy development, environmental testing (high-temperature high-pressure water and elevated temperature steam), detailed mechanical characterization, material property database development, neutron irradiation, thin tube production, and multiple integral fuel test campaigns. Instead of off-the-shelf commercial alloys that might not prove optimal for the LWR fuel cladding application, a large amount of effort has been placed on the alloy development to identify the most optimum composition and microstructure for this application. The development program is targeting a cladding that offers performance comparable to or better than modern Zr-based alloys under normal operating and off-normal conditions. This paper provides a comprehensive overview of the systematic effort to advance nuclear-grade FeCrAl alloys as an ATF cladding in commercial LWRs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High Temperature Steam Corrosion of Cladding for Nuclear Applications: Experimental

Stability of cladding materials under off-normal conditions is an important issue for the safe operation of light water nuclear reactors. Metals, ceramics, and metal/ceramic composites are being investigated as substitutes for traditional zirconium-based cladding. To support down-selection of these advanced materials and designs, a test apparatus was constructed to study the onset and evolution of cladding oxidation, and deformation behavior of cladding materials, under loss-of-coolant accident scenarios. Preliminary oxidation tests were conducted in dry oxygen and in saturated steam/air environments at 1000OC. Tube samples of Zr-702, Zr-702 reinforced with 1 ply of a ß-SiC CMC overbraid, and sintered a-SiC were tested. Samples were induction heated by coupling to a molybdenum susceptor inside the tubes. The deformation behavior of He-pressurized tubes of Zr-702 and SiC CMC-reinforced Zr-702, heated to rupture, was also examined.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Broadband Ultrafast Dynamics of Refractory Metals: TiN and ZrN

Transition metal nitrides have recently gained attention in the fields of plasmonics, plasmon-enhanced photocatalysis, photothermal applications, and nonlinear optics because of their suitable optical properties, refractory nature, and large laser damage thresholds. Here we report comparative studies of the transient response of films of titanium nitride (TiN), zirconium nitride (ZrN), and gold (Au) under femtosecond excitation. Broadband transient optical characterization helps to adjudicate earlier, somewhat inconsistent reports regarding hot electron lifetimes based upon single wavelength measurements. These pump–probe experiments show sub-picosecond transient dynamics only within the epsilon-near-zero window of the refractory metals. The dynamics are dominated by photoinduced interband transitions resulting from ultrafast electron energy redistribution. The enhanced reflection modulation in the epsilon-near-zero window makes it possible to observe the ultrafast optical response of these films at low pump fluences. These results indicate that electron–phonon coupling in TiN and ZrN is 25–100 times greater than in Au. Strong electron–phonon coupling drives the sub-picosecond optical response and facilitates greater lattice heating compared to Au, making TiN and ZrN promising for photothermal applications. The spectral response and dynamics of TiN and ZrN are only weakly sensitive to pump fluence and pump excitation energy. However, the magnitude of the response is much greater at higher pump photon energies and higher fluences, reaching peak observed values of 15% in TiN and 50% in ZrN in the epsilon-near-zero window.

36 MATERIALS SCIENCE↗

Post-Synthetic Mannich Chemistry on Metal-Organic Frameworks: System-Specific Reactivity and Functionality-Triggered Dissolution

he Mannich reaction of the zirconium MOF [Zr6O4 (OH)4 (bdc-NH2 )6 ] (UiO-66-NH2 , bdc-NH2=2-amino-1,4- benzenedicarboxylate) with paraformaldehyde and pyrazole, imidazole or 2-mercaptoimidazole led to post-synthetic modification (PSM) through C@N bond formation. The reaction with imidazole (Him) goes to completion whereas those with pyrazole (Hpyz) and 2-mercaptoimidazole (HimSH) give up to 41 and 36% conversion, respectively. The BET surface areas for the Mannich products are reduced from that of UiO-66-NH2 , but the compounds show enhanced selectivity for adsorption of CO2 over N2 at 273 K. The thiol-containing MOFs adsorb mercury(II) ions from aqueous solution, removing up to 99%. The Mannich reaction with pyrazole succeeds on [Zn4O(bdc-NH2 )3 ] (IRMOF-3), but a similar reaction on [Zn2 (bdc-NH2 )2 (dabco)] (dabco=1,4-diazabicyclo[2.2.2]octane) gave [Zn3 (bdc-NH2 )1.32(bdc-NHCH2pyz)1.68(dabco)]·2C7H8 5, whereas the reaction with imidazole gave the expected PSM product. Compound 5 forms via a dissolution–recrystallisation process that is triggered by the “free” pyrazolate nitrogen atom competing with dabco for coordination to the zinc(II) centre. In contrast, the “free” nitrogen atom on the imidazolate is too far away to compete in this way. Mannich reactions on [In(OH)(bdc-NH2 )] (MIL-68(In)-NH2 ) stop after the first step, and the product was identified as [In(OH)(bdcNH2 )0.41(bdc-NHCH2OCH3 )0.30(bdc-N=CH2 )0.29], with addition of the heterocycle prevented by steric interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On phosphorus chemical shift anisotropy in metal (IV) phosphates and phosphonates: A 31 P NMR experimental study

The phosphorus chemical shift anisotropies, 31 PΔcs, and asymmetry parameters η were measured by the 31 P{ 1 H} NMR experiments in static and low-frequency spinning samples of the zirconium phosphates and phosphonates and also in the mixed Zr (IV)/Sn (IV) phosphate/phosphonate material. The data obtained have shown a 111 connectivity in the HPO 4 and PO 3 groups, which does not change at modification and intercalation of the materials. The 31 PΔcs values of the phosphonate groups (43–49 ppm) significantly surpass the values characterizing the HPO 4 groups (23–37 ppm). The 31 P Δcs values obtained for the metal (IV) phosphates were discussed in terms of P-O distances. Finally, the 31 P chemical shift anisotropy parameters can help at elucidation of local structures in phosphate and phosphonate materials.

1H MAS NMR↗