Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulent Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

The Effect of Two-Dimensional Forcing on Self-Similar Turbulent Plane Wakes

Three direct numerical simulations of time-evolving turbulent plane wakes with velocity deficit Reynolds numbers of about 2,000 have been simulated using a spectral numerical method with up to 600 x 260 x 160 modes. The initial conditions for the simulations are generated from direct numerical simulations of a turbulent boundary layer (momentum thickness Reynolds number of 670), and varying amounts of additional two- dimensional, forcing. In order to preserve the self-similar flow evolution, the forcing is implemented by multiplying all the two-dimensional modes in the initial condition by a constant factor. In the "natural" case no additional forcing is used; in the "forced" and "heavily forced" cases this factor is 5 and 20, respectively. The wake spreading rate Is increased by factors of 1.7 and 7.1 for the two forced cases. The Reynolds stresses are also increased by a similar or even larger factor. These results indicate that the plane wake is much more sensitive to initial forcing than the plane mixing layer. As in the plane mixing layer, two-dimensional forcing promotes more organized large-scale vortical flow structures and these structures axe sometimes separated by "braid regions" containing streamwise "rib" vortices, unlike in the unforced wake.

Rogers, M. M.↗

Superfluid Turbulence from Quantum Kelvin Wave to Classical Kolmogorov Cascades

The main topological feature of a superfluid is a quantum vortex with an identifiable inner and outer radius. A novel unitary quantum lattice gas algorithm is used to simulate quantum turbulence of a Bose-Einstein condensate superfluid described by the Gross-Pitaevskii equation on grids up to 5760{sup 3}. For the first time, an accurate power-law scaling for the quantum Kelvin wave cascade is determined: k{sup -3}. The incompressible kinetic energy spectrum exhibits very distinct power-law spectra in 3 ranges of k space: a classical Kolmogorov k{sup -(5/3)} spectrum at scales greater than the outer radius of individual quantum vortex cores and a quantum Kelvin wave cascade spectrum k{sup -3} on scales smaller than the inner radius of the quantum vortex core. The k{sup -3} quantum Kelvin wave spectrum due to phonon radiation is robust, while the k{sup -(5/3)} classical Kolmogorov spectrum becomes robust on large grids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DISSIPATION WAVENUMBERS FOR TURBULENCE IN ELECTRON-POSITRON PLASMAS

Many astrophysical systems involve turbulent electron-positron plasmas. Linear kinetic theory of electromagnetic fluctuations in homogeneous, magnetized, collisionless, non-relativistic electron-positron plasmas predicts that two lightly damped modes propagate at relatively long wavelengths: an Alfven-like mode with dispersion {omega}{sub r}=k{sub ||}v-tilde{sub A} and a magnetosonic-like mode with dispersion {omega}{sub r}{approx_equal}kv-tilde{sub A} if {beta} {sub e} << 1. Here, v-tilde{sub A} is the Alfven speed in an electron-positron plasma and || refers to the direction parallel to the background magnetic field B{sub o}. The dissipation wavenumber k{sub d} is defined as the value of k at which the damping rate equals the rate of energy transfer by the turbulent cascade. Using linear theory and a basic turbulent cascade model, k{sub d} is predicted for turbulence at propagation quasi parallel to B{sub o}, for quasi-perpendicular magnetosonic-like turbulence, and for quasi-perpendicular Alfven-like turbulence. In the latter case, the model predicts that an increase in the turbulent energy should correspond to an increase in k{sub d} . The assumptions and predictions of the model may be tested by particle-in-cell simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulence-level dependence of cosmic ray parallel diffusion

ABSTRACT Understanding the transport of energetic cosmic rays belongs to the most challenging topics in astrophysics. Diffusion due to scattering by electromagnetic fluctuations is a key process in cosmic ray transport. The transition from a ballistic to a diffusive-propagation regime is presented in direct numerical calculations of diffusion coefficients for homogeneous magnetic field lines subject to turbulent perturbations. Simulation results are compared with theoretical derivations of the parallel diffusion coefficient’s dependences on the energy and the fluctuation amplitudes in the limit of weak turbulence. The present study shows that the widely used extrapolation of the energy scaling for the parallel diffusion coefficient to high turbulence levels predicted by quasi-linear theory does not provide a universally accurate description in the resonant-scattering regime. It is highlighted here that the numerically calculated diffusion coefficients can be polluted for low energies due to missing resonant interaction possibilities of the particles with the turbulence. Five reduced-rigidity regimes are established, which are separated by analytical boundaries derived in this work. Consequently, a proper description of cosmic ray propagation can only be achieved by using a turbulence-level-dependent diffusion coefficient and can contribute to solving the Galactic cosmic ray gradient problem.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of angular momentum alignment and strong magnetic fields on the formation of protostellar discs

Star-forming molecular clouds are observed to be both highly magnetized and turbulent. Consequently, the formation of protostellar discs is largely dependent on the complex interaction between gravity, magnetic fields, and turbulence. Studies of non-turbulent protostellar disc formation with realistic magnetic fields have shown that these fields are efficient in removing angular momentum from the forming discs, preventing their formation. However, once turbulence is included, discs can form in even highly magnetized clouds, although the precise mechanism remains uncertain. In this work, we introduce several high-resolution simulations of turbulent, realistically magnetized, high-mass molecular clouds with both aligned and random turbulence to study the role that turbulence, misalignment, and magnetic fields have on the formation of protostellar discs. We reveal that when the turbulence is artificially aligned so that the angular momentum is parallel to the initial uniform field, no rotationally supported discs are formed, regardless of the initial turbulent energy. We conclude that turbulence and the associated misalignment between the angular momentum and the magnetic field are crucial in the formation of protostellar discs in the presence of realistic magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbulence structures associated with the bursting event

Turbulence structures in a wall bounded shear layer during the bursting event detected by a conditional sampling technique are investigated using data obtained from large eddy simulation of turbulent channel flow. Streamlines are constructed from the ensemble-averaged velocity field to illustrate the flow patterns associated with the bursting event. The spatting motions during the sweep event and the existence of a pair of counterrotating streamwise vortices during the ejection process are exhibited.

Kim, J.↗

Turbulence structures associated with the bursting event

Turbulence structures in a wall bounded shear layer during the bursting event detected by a conditional sampling technique are investigated using data obtained from large eddy simulation of turbulent channel flow. Streamlines are constructed from the ensemble-averaged velocity field to illustrate the flow patterns associated with the bursting event. The splatting motions during the sweep event and the existence of a pair of counterrotating streamwise vortices during the ejection process are exhibited.

Kim, J.↗

A Kinematically Consistent Two-Point Correlation Function

A simple kinematically consistent expression for the longitudinal two-point correlation function related to both the integral length scale and the Taylor microscale is obtained. On the inner scale, in a region of width inversely proportional to the turbulent Reynolds number, the function has the appropriate curvature at the origin. The expression for two-point correlation is related to the nonlinear cascade rate, or dissipation epsilon, a quantity that is carried as part of a typical single-point turbulence closure simulation. Constructing an expression for the two-point correlation whose curvature at the origin is the Taylor microscale incorporates one of the fundamental quantities characterizing turbulence, epsilon, into a model for the two-point correlation function. The integral of the function also gives, as is required, an outer integral length scale of the turbulence independent of viscosity. The proposed expression is obtained by kinematic arguments; the intention is to produce a practically applicable expression in terms of simple elementary functions that allow an analytical evaluation, by asymptotic methods, of diverse functionals relevant to single-point turbulence closures. Using the expression devised an example of the asymptotic method by which functionals of the two-point correlation can be evaluated is given.

Ristorcelli, J. R.↗

Annual Research Briefs, 2002: Center for Turbulence Research

Turbulent combustion remains the largest component of the CTR's core program. This program and several related activities at CTR are supported by NASA's Ultra Efficient Engine Technology Program. It is also intimately connected with the Department of Energy's ASCI program at Stanford which develops the technology for numerical simulation of realistic aircraft engines using state of the art massively parallel computers. In combustion modeling the attention has been directed to the modeling of higher levels of complexity such as spray dynamics, radiation and soot formation. Major aircraft engine manufacturers have shown considerable interest in this program; in particular, a significant active collaboration exists between CTR and the Pratt & Whitney Corporation. CTR's combustion program is essentially based on the large-eddy simulation technique, LES, which is actively being pursued at CTR for this and many other applications. Important accomplishments in LES included simulations with three-dimensional filters which result in grid independent calculations (that is why we call it "true" LES), and the development of the methodology for integration of LES and Reynolds Averaged computations. Optimization techniques are being studied and used for the important problem of wall boundary conditions for LES as well as for optimal shape design for aeroacoustic and aerodynamic performance gains.

ULTRA EFFICIENT ENGINE TECHNOLOGY↗

2D full wave modeling for a synthetic Doppler backscattering diagnostic

Doppler backscattering (DBS) is a plasma diagnostic used in tokamaks and other magnetic confinement devices to measure the fluctuation level of intermediate wavenumber (k{sub {theta}}{rho}{sub s}{approx} 1) density fluctuations and the lab frame propagation velocity of turbulence. Here, a synthetic DBS diagnostic is described, which has been used for comparisons between measurements in the DIII-D tokamak and predictions from nonlinear gyrokinetic simulations. To estimate the wavenumber range to which a Gaussian beam would be sensitive, a ray tracing code and a 2D finite difference, time domain full wave code are used. Experimental density profiles and magnetic geometry are used along with the experimental antenna and beam characteristics. An example of the effect of the synthetic diagnostic on the output of a nonlinear gyrokinetic simulation is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Closed-Loop HIRF Experiments Performed on a Fault Tolerant Flight Control Computer

ABSTRACT Closed-loop HIRF experiments were performed on a fault tolerant flight control computer (FCC) at the NASA Langley Research Center. The FCC used in the experiments was a quad-redundant flight control computer executing B737 Autoland control laws. The FCC was placed in one of the mode-stirred reverberation chambers in the HIRF Laboratory and interfaced to a computer simulation of the B737 flight dynamics, engines, sensors, actuators, and atmosphere in the Closed-Loop Systems Laboratory. Disturbances to the aircraft associated with wind gusts and turbulence were simulated during tests. Electrical isolation between the FCC under test and the simulation computer was achieved via a fiber optic interface for the analog and discrete signals. Closed-loop operation of the FCC enabled flight dynamics and atmospheric disturbances affecting the aircraft to be represented during tests. Upset was induced in the FCC as a result of exposure to HIRF, and the effect of upset on the simulated flight of the aircraft was observed and recorded. This paper presents a description of these closed- loop HIRF experiments, upset data obtained from the FCC during these experiments, and closed-loop effects on the simulated flight of the aircraft.

Belcastro, Celeste M.↗

An experimental study of the effects of rapid rotation on turbulence

Experiments, large eddy simulations and direct numerical simulations all show that rapid rotation has a striking effect on homogeneous nearly isotropic turbulence. The cascade process is effectively inhibited by rotation, and thus dissipation is greatly reduced. Some attempts have been made to incorporate this effect in turbulence models. Numerical simulation further showed the somewhat surprising result that anisotropic homogeneous turbulence subjected to rotation tended towards an isotropic state; however, the residual anisotropy was not zero. Reynolds (1989) performed a detailed analysis using Rapid Distortion Theory (RDT) and showed that a reduction in the anisotropy is indeed expected and if the anisotropy is produced by irrotational strain then the anisotropy tensor b(sub ij) is asymptotically driven to half its initial value. Our objective is to extend the work of the experiments mentioned above to lower turbulent Rossby numbers and to confirm some of the results obtained by Reynolds (1989) for anisotropic turbulence.

Veeravalli, S. V.↗

Dual spectra and mixed energy cascade of turbulence in the wavelet representation

The wavelet-transformed Navier-Stokes equations are used to define quantities such as the transfer of kinetic energy and the flux of kinetic energy through scale r at position x. Direct numerical simulations of turbulent shear flow reveal that although their mean spatial values agree with their traditional counterparts in Fourier space, their spatial variability at every scale is very large, exhibiting non-Gaussian statistics. The local flux of energy involving scales smaller than some r also exhibits large spatial intermittency, and it is negative quite often, indicative of local inverse cascades.

Meneveau, Charles↗

Evaluation of a nonlinear variational multiscale method for fluid transport problems

Diverse transport problems, especially those based on fluid flow models, are intrinsically multiscale and nonlinear, characteristics that often lead to intricate dynamics such as the development of instabilities and turbulence. Computational simulations that resolve all scales in these problems are often unfeasible, prompting to coarse-grained simulation strategies in which small-scale features are modeled instead of resolved. Variational Multiscale (VMS) methods, and particularly residual-based Large-Eddy Simulation (LES) approaches, have proven effective and robust for the coarse-grained simulation of complex transport problems. VMS methods avoid the assumption of separable nonlinearity and the reliance on empirical small-scale models by using a variational decomposition of scales together with a residual-based approximation of the small-scales. Evaluation of a nonlinear VMS approach, denoted as VMS n , is presented for the coarse-grained simulation of transient-advective-diffusive-reactive (TADR) transport problems arising from fluid flow models. In contrast to classical VMS approaches that neglect the effect of the small scales on the transport operator, VMS n treats the inter-dependence between large- and small-scales upfront. The treatment of inter-scale coupling involves the solution of a local algebraic nonlinear system describing the evolution of the small-scales. The VMS n approach is complemented with two algebraic approximations of the small-scales: one based on the main diagonal of the transport matrices and another that preserves transport fluxes and is suitable for generic TADR systems. The suitability of the VMS n approach for handling general TADR problems and regimes is evaluated with benchmark incompressible, compressible, and magnetohydrodynamic laminar flow problems, the incompressible Taylor-Green vortex flow, the turbulent free jet, and the two-temperature arc in crossflow. Furthermore, simulation results show that VMS n leads to minor improvements in accuracy with respect to the classical VMS for the laminar flow problems, but to significantly greater accuracy for the turbulent flows and the unsteady plasma flow problems, while using the same cohesive numerical formulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DIRECT NUMERICAL SIMULATIONS OF REFLECTION-DRIVEN, REDUCED MAGNETOHYDRODYNAMIC TURBULENCE FROM THE SUN TO THE ALFVÉN CRITICAL POINT

We present direct numerical simulations of inhomogeneous reduced magnetohydrodynamic (RMHD) turbulence between the Sun and the Alfvén critical point. These are the first such simulations that take into account the solar-wind outflow velocity and the radial inhomogeneity of the background solar wind without approximating the nonlinear terms in the governing equations. RMHD turbulence is driven by outward-propagating Alfvén waves (z {sup +} fluctuations) launched from the Sun, which undergo partial non-WKB reflection to produce sunward-propagating Alfvén waves (z {sup –} fluctuations). We present 10 simulations with different values of the correlation time τ{sub c{sub sun}{sup +}} and perpendicular correlation length L{sub ☉} of outward-propagating Alfvén waves at the coronal base. We find that between 15% and 33% of the z {sup +} energy launched into the corona dissipates between the coronal base and Alfvén critical point. Between 33% and 40% of this input energy goes into work on the solar-wind outflow, and between 22% and 36% escapes as z {sup +} fluctuations through the simulation boundary at r = r{sub A}. The z {sup ±} power spectra scale like k{sub perpendicular}{sup -α{sup ±}}, where k is the wavenumber in the plane perpendicular to B{sub 0}. In our simulation with the smallest value of τ{sub c{sub sun}{sup +}} (∼2 minutes) and largest value of L{sub ☉} (2 × 10{sup 4} km), we find that α{sup +} decreases approximately linearly with increasing ln (r), reaching a value of 1.3 at r = 11.1 R{sub ☉}. Our simulations with larger values of τ{sub c{sub sun}{sup +}} exhibit alignment between the contours of constant φ{sup +}, φ{sup –}, Ω{sub 0}{sup +}, and Ω{sub 0}{sup -}, where φ{sup ±} are the Elsässer potentials and Ω{sub 0}{sup ±} are the outer-scale parallel Elsässer vorticities.

79 ASTRONOMY AND ASTROPHYSICS↗

Machine learning-assisted early ignition prediction in a complex flow

Machine learning methods are used to improve the efficiency by which turbulence-resolved simulations predict whether a hydrogen jet in air crossflow will successfully ignite. The flush-mounted jet issues perpendicularly from the wall of a low-speed wind tunnel into a turbulent boundary layer wherein a laser-induced optical breakdown (LIB) hotspot is deposited. A detailed hydrogen chemical mechanism is used to model the radicals and any subsequent chemical reactions. A dielectric-barrier discharge actuator generates body forces and hydrogen radicals near the jet orifice. Here we focus on the success or not of the ignition based on LIB location. A challenge is that definitive determination of this requires long simulations, up to 440 µs after the LIB deposition. This is particularly expensive since multiple simulations are required to find the threshold. To reduce the computational effort, three short-time (91 µs) criteria are proposed, evaluated, and compared: a constructed criterion based on detailed observations of radicals near the stoichiometric surface and two machine learning approaches, each trained on 38 realizations. The constructed criterion provides a low-cost estimate of the ignition boundary that is unambiguous in 45 of the 50 training and test trials, so only 10% of them would need to be simulated longer. The trained neural networks correctly predict outcomes in all cases evaluated, with the more automated procedure—a convolutional neural network (CNN) trained on two-dimensional images—providing the most definitive outcome prediction. From the CNN, a sensitivity analysis is used to determine which kernel features from the two-dimensional input data, as defined by intermediate-layer network weights, are important for identifying ignition.

42 ENGINEERING↗

Turbulent transport in premixed flames

Simulations of planar, premixed turbulent flames with heat release were used to study turbulent transport. Reynolds stress and Reynolds flux budgets were obtained and used to guide the investigation of important physical effects. Essentially all pressure terms in the transport equations were found to be significant. In the Reynolds flux equations, these terms are the major source of counter-gradient transport. Viscous and molecular terms were also found to be significant, with both dilatational and solenoidal terms contributing to the Reynolds stress dissipation. The BML theory of premixed turbulent combustion was critically examined in detail. The BML bimodal pdf was found to agree well with the DNS data. All BML decompositions, through the third moments, show very good agreement with the DNS results. Several BML models for conditional terms were checked using the DNS data and were found to require more extensive development.

Rutland, C. J.↗

Cross-helicity dynamo effect in magnetohydrodynamic turbulent channel flow

A large eddy simulation of magnetohydrodynamic (MHD) turbulent channel flow is carried out to investigate the dynamo mechanism. It is shown that the streamwise component of the mean magnetic field is generated and sustained due to the effect of the turbulent electromotive force. The Reynolds-averaged turbulence model for MHD flows is assessed; it is suggested that the cross-helicity dynamo effect contributes to the turbulent electromotive force; that is, the electromotive force parallel to the mean vorticity is generated due to the turbulent cross helicity. To verify the importance of the cross-helicity dynamo, the transport equation for the turbulent electromotive force is evaluated; it is confirmed that the term involving the cross helicity and the mean vorticity is the main production term for the turbulent electromotive force. The transport equations for the turbulent kinetic and magnetic energies are also examined to discuss the dynamo mechanism from the viewpoint of the energy transfer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗