Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Assessment and comparison of ordered & non-ordered supported metal oxide catalysts for upgrading propane to propylene

Propylene is an important chemical feedstock that is largely produced via cracking of oil-derived naphtha. Direct conversion of propane into propylene may be a more attractive alternative. Specifically, propane dehydrogenation (DH) and oxidative dehydrogenation (ODH) are promising for this transformation, albeit only DH has been industrially implemented. However, even the best DH catalysts (Pt-based) still suffer from deactivation. VO x - and BO x -based ODH catalysts result in significant over-oxidation and lack a mechanistic understanding. A common challenge in developing these catalysts is the broad distribution of surface species caused by the use of non-ordered catalyst supports. This hampers clear structure-performance correlations. Recent progress in the preparation of well-defined active sites on ordered supports has brought about improved catalysts, as well as fundamental insight into the working mechanism. This review will highlight recent advancements in the development of these catalysts and provide direction on the use of ordered supports for propane upgrading.

03 NATURAL GAS↗
DOE OSTI2025

Tuning transition metal nanoparticles on a non-traditional support via experimental design

The ability to control metal nanoparticle size and morphology on supported catalysts is crucial for optimizing catalytic performance in targeted applications. Here, this work presents a systematic approach for tuning Ni particle and crystallite size on an unconventional, low-porosity silica fume support through select thermal treatments. The catalyst was synthesized via the deposition of nickelocene onto silica fume, resulting in well-dispersed Ni nanoparticles. A face-centered central composite design was employed to systematically assess the effects of time, temperature, and sintering gas environment on metal particle growth. The results demonstrate that the sintering gas environment is the primary factor governing particle and crystallite evolution, with temperature as the next most significant influence. Nickel nanoparticles sintered at temperatures of 650 °C and above under inert conditions exhibited substantial growth and polycrystalline structures, whereas samples treated in oxidative environments formed NiO, restricting particle mobility. Minimally oxidative (500 ppm O₂) environments facilitated rapid sintering while effectively removing residual ligands from the one-step nickelocene deposition process. Extensive structural characterization via a combination of scanning transmission electron microscopy, X-ray diffraction, hydrogen temperature programmed reduction, and small-angle X-ray scattering revealed that oxidative treatments enhanced metal-support interactions, as evidenced by increased reduction temperatures and narrower particle size distributions. These findings establish quantitative relationships between sintering parameters and Ni nanoparticle characteristics, providing a framework for rational catalyst design through controlled thermal treatments. This methodology is broadly applicable to other catalytic systems and provides a quantitative foundation for catalyst design.

CVD↗
DOE OSTI2018

Molecular structure and sour gas surface chemistry of supported K 2 O/WO 3 /Al 2 O 3 catalysts

Molecular structures of the unprompted and K 2 O-promoted supported WO 3 /Al 2 O 3 catalysts were studied with in situ Raman and UV-vis spectroscopy. In situ Raman spectra revealed that supported 20% WO 3 /Al 2 O 3 corresponds to near monolayer coverage of isolated and oligomeric surface WOx species on Al 2 O 3 . Above monolayer surface WO x coverage (21% WO 3 /Al 2 O 3 ), crystalline WO 3 nanoparticles are also present. The addition of K 2 O to the supported WO 3 /Al 2 O 3 catalyst increased the concentration of isolated surface WO x species and did not form K 2 WO 4 nanoparticles. The reducibility of the tungsten oxide structures depends on their structures (2D or 3D) and the K 2 O promoter. Their interaction with acidic CO 2 and SO 2 gases was also investigated. Adsorption of CO 2 creates several surface carbonate species of varying acidity that were detected using a combination of in situ IR and mass spectroscopy. Adsorbed bicarbonate form on weakly basic surface sites on tungsten oxide monolayer WO 3 /Al 2 O 3 catalyst as well as in the presence of low 2.5% K 2 O loading. At high 5% K 2 O loading, the presence of the strong surface basic sites yields adsorbed carbonates. In conclusion, after SO 2 pretreatment, however, new strongly adsorbed sulfate appears on the surface that inhibit CO 2 adsorption.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Nitrogen functionalized carbon black: A support for Pt nanoparticle catalysts with narrow size dispersion and high surface area

Amorphous carbon is widely used as a support for Pt nanoparticle catalysts. We show here that catalytic performance can be greatly improved by functionalizing the carbon support with a nitrogen-containing molecule, in conjunction with a new method for the in situ synthesis of nanocrystalline Pt. Vulcan® carbon black is covalently functionalized with 4-aminomethylpyridine (4AMP) via formation of an acid chloride on the surface followed by amidation. The resulting 4AMP-functionalized Vulcan® (4AMP-VC) was thoroughly characterized and shown to contain N at the surface of the Vulcan® carbon support. We note Pt nanoparticles grown on the 4AMP-VC have a smaller average size and much narrower size distribution than Pt nanoparticles grown on bare Vulcan® (VC). In addition, the Pt/4AMP-VC catalysts show higher catalytic activity and are more durable than their Pt/VC counterparts. We infer through careful analysis of X-ray photoelectron spectra that the Pt nanoparticles bind preferentially to the pyridinic nitrogen of the 4AMP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Gold nanocatalysts supported on heterostructured PbSO4-MCF mesoporous materials for CO oxidation

Metal oxides are commonly used as the supports of gold nanoparticles for catalytic CO oxidation, whereas metal salts are rarely considered suitable supports. In the present work, we developed a new kind of gold nanocatalyst supported on heterostructured PbSO4-MCF mesoporous materials that was prepared by an in situ growth method using dodecylbenzenesulfonate (SOBS) as a sulfonate precursor. It was found that an Au/PbSO4-MCF (SDBS) catalyst preheated at 300 degrees C showed high CO conversion below 100 degrees C. In addition, the stability of selected catalysts was studied as a function of time on stream. Because of the alteration of surface properties, these Au nanocatalysts were highly sinter-resistant. Published by Elsevier B.V.

Li, Lin↗
DOE OSTI2014

ROLE OF TUNGSTEN IN THE AQUEOUS PHASE HYDRODEOXYGENATION OF ETHYLENE GLYCOL ON TUNGSTATED ZIRCONIA SUPPORTED PALLADIUM

The focus of the present work was specifically on the elucidation of the role played by tungsten on the catalytic activity and selectivity of tungstated zirconia supported palladium (Pd-mWZ) for the aqueous phase hydrodeoxygenation (APHDO) of ethylene glycol (EG). Zirconia supported palladium (Pd-mZ) was used as reference. The catalysts were prepared via incipient wet impregnation and characterized using X-ray diffraction (XRD), temperature-programmed reduction (TPR), CO pulse chemisorption, CO-DRIFTS, ammonia temperature-programmed desorption (NH3-TPD) and pyridine adsorption. The presence of W results in larger Pd particles on supported Pd catalysts, i.e., 0.9 and 6.1 nm Pd particles are for Pd-mZ and Pd-mWZ, respectively. For comparison purposes, the activity of the catalytic materials used in this work was obtained using a well-defined set of operating conditions. The catalytic activity measurements show that the overall intrinsic activity of Pd particles on mWZ is 1.9 times higher than on mZ. APHDO process appears to be highly favored on Pd-mWZ whereas Pd-mZ exhibits a higher selectivity for reforming. This difference in terms of selectivity seems to be related to the high concentration of Brønsted acid sites and electron-deficient Pd species present on Pd-mWZ.

AQUEOUS PHASE HYDRODEOXYGENATION↗
DOE OSTI2016

Effect of nanostructured carbon support on copper electrocatalytic activity toward CO 2 electroreduction to hydrocarbon fuels

The effect of support on electrocatalytic activity of Cu nanoparticles (NPs) towards CO 2 electroreduction to hydrocarbon fuels (CH 4 and C 2 H 4 ) is investigated for three types of nanostructured carbons: single wall carbon nanotubes (SWNT), graphene (GP) and onion-like carbon (OLC). Cu/SWNT, Cu/GP and Cu/OLC composite catalysts are synthesized and characterized by X-Ray diffraction analysis, transmission electron microscopy and electrochemical surface area measurements. Electrocatalytic activities of the synthesized materials, as measured in an electrochemical cell connected to a gas chromatograph, are compared to that of Cu NPs supported on Vulcan carbon. All four catalysts demonstrate higher activity towards C 2 H 4 generation vs CH 4 , with production of the latter mostly suppressed on Cu NPs supported on nanostructured substrates. Onset potentials for C 2 H 4 vs CH 4 generation are shifted positively by 200 mV for Cu/SWNT, Cu/GP, and Cu/OLC catalysts. The Cu/OLC catalyst is found to be superior to the other two nanostructured catalysts in terms of stability, activity and selectivity towards C 2 H 4 generation. Its faradaic efficiency reached 60% at -1.8 V vs Ag/AgCl. The enhanced activity and stability of Cu/OLC catalyst can be attributed to the unique catalyst design, wherein a shell of OLC surrounds the Cu NPs such that the outer layer acts as a filter that protects the Cu surface from adsorption of undesirable species, enhances its electrocatalytic performance, and improves its viability in CO 2 electroreduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Aerobic oxidative esterification of primary alcohols over Pd-Au bimetallic catalysts supported on mesoporous silica nanoparticles

Here we have prepared a series of mesoporous silica nanoparticle (MSN) supported Pd-Au bimetallic catalysts using a newly developed sequential impregnation method. These catalysts were fully characterized by various techniques including nitrogen sorption, powder X-ray diffraction, inductively coupled plasma mass spectrometry (ICP-MS), transmission electron microscopy (TEM) and high angle annular dark-field scanning transmission electron microscopy (HADDF-STEM). By using this synthetic approach, we observed metal nanoparticles (NP) with diameters of 1–2 nm homogeneously supported on the MSN. The catalytic performance of these MSN supported metal NPs was tested by aerobic oxidative esterification in a tandem reaction where primary alcohols are oxidized to their corresponding aldehydes and to esters in a subsequent reaction. We determined that Pd NPs are very efficient in the first step of oxidation; however, stagnant in the subsequent oxidation. On the contrary, Au NPs show slow reactivity in converting alcohols to aldehydes, but extraordinarily efficient in the oxidation of aldehydes to esters. By fine tuning the metal ratio, the bimetallic catalyst exhibits better reactivity and selectivity toward a variety of primary alcohols than the corresponding monometallic catalysts. In addition, we also found that the bimetallic Pd-Au@MSN catalysts can be recycled three times without a significant loss in activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dry reforming of methane over Ni supported on LaMnO 3 thin films

Thin films of LaMnO 3 were deposited onto MgAl 2 O 4 by Atomic Layer Deposition (ALD) and studied as supports for Ni in the Dry Reforming of Methane (DRM). Scanning Transmission Electron Microscopy (STEM) with Energy-Dispersive X-ray Spectroscopy (EDS) demonstrated that LaMnO 3 covered the support uniformly, and X-ray diffraction (XRD) showed that the LaMnO 3 films maintained their perovskite structure after 5 redox cycles at 1073 K. The Ni also remained well dispersed after 5 redox cycles at 1073 K. The LaMnO 3 -supported catalyst was more active than Ni on the unmodified MgAl 2 O 4 and showed superior resistance against coke formation. Lastly, the results for Ni on the LaMnO 3 films are compared to previous results for Ni on LaFeO 3 , CaTiO 3 , SrTiO 3 , and BaTiO 3 films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular structure and catalytic promotional effect of Mn on supported Na 2 WO 4 /SiO 2 catalysts for oxidative coupling of methane (OCM) reaction

The structure and promotional effect of Mn in supported Mn-Na 2 WO 4 /SiO 2 catalysts for the oxidative coupling of methane (OCM) reaction has been debated for a longtime in the literature. In the current investigation, with the aid of multiple in-situ characterization studies, we show that the freshly calcined supported 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst possesses crystalline Na 2 WO 4 , Mn 2 O 3 and SiO 2 (cristobalite phase) along with surface MnO x and Na-WO x sites at low temperature and oxidizing environments. Under the OCM reaction environment (T>800°C), the crystalline Na 2 WO 4 phase melts and Mn 2 O 3 phase reduces. In contrast, the surface MnO x and Na-WO x sites exhibit excellent thermal and chemical stability. Exposure of the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst to the OCM reaction environment redisperses the molten Na 2 WO 4 phase on the SiO 2 support to form new surface WO x sites. Interestingly, the stable MnO x species interacts with both molten Na 2 WO 4 phase and surface Na-WO x sites during OCM reaction. Controlled transient kinetic experiments in TAP and detailed steady state OCM fixed-bed reaction studies reveal the role and promotional effect of Mn in the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst. The W-oxides (both molten Na 2 WO 4 and surface Na-WO x sites) are the active sites for the catalytic OCM reaction and the MnO x species only function as promoters. The promotion of MnO x strongly depends on the gas phase O 2 partial pressure and the MnO x species act as mediators for oxygen exchange between the gas phase molecular O 2 and catalyst lattice oxygen. In conclusion, the temperature dependent MnO x promotion reveals that the MnO x species selectively promote the molten Na 2 WO 4 phase at lower reaction temperature and the surface Na-WO x sites at higher temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly efficient Pt catalyst on newly designed CeO 2 -ZrO 2 -Al 2 O 3 support for catalytic removal of pollutants from vehicle exhaust

Pt-CeO 2 catalysts have been widely studied for the vehicle emission control. Designing novel CeO 2 based supports with improved physical-chemical properties has become a research hotspot to further promote the catalytic performance and stability of Pt-CeO 2 catalysts. In this work, through utilizing a unique, two-step incipient wetness impregnation (T-IWI) method for ceria-zirconia-alumina (CZA-T) support preparation, a Pt single site catalyst (Pt/CZA-T) with excellent thermal stability was synthesized. Higher oxidation activity and Oxygen storage capacity (OSC) were achieved on activated Pt/CZA-T, comparing to Pt catalysts on regular CeO 2 /Al 2 O 3 (Pt/CA) and one-step prepared CeZrO x /Al 2 O 3 (Pt/CZA). Via the modification of hydrophilic/hydrophobic properties of γ-Al 2 O 3 by this unique T-IWI method, finer Ce 0.9 Zr 0.1 O 2 particles with higher density of surface defects were formed on CZA-T, on which a higher Pt dispersion and stronger Pt-O-Ce interaction were achieved. Upon activation, smaller, well-dispersed Pt clusters on CZA-T were generated. It was concluded that the CO oxidation performance and OSC were highly related to the size of Pt clusters on different supports that we have developed. Finally, more Pt sites located at Pt cluster-CeZrO x interfaces, which were the real active sites, were responsible for the highest OSC function and CO oxidation activity of activated Pt/CZA-T catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Experimental and Computational Studies of the Production of 1,3-Butadiene from 2,3-Butanediol Using SiO2-Supported H3PO4 Derivatives

Silica-supported phosphoric acid and metal phosphate catalyzed 1,3-butadiene (BDE) production from 2,3-butanediol (2,3-BDO) was studied using experimental and computational techniques. The catalyst was initially tested in a continuous flow reactor using commercially available 2,3-BDO, leading to maximum BDE yields of 63C%. Quantum chemical mechanistic studies revealed 1,2-epoxybutane is a kinetically viable and thermodynamically stable intermediate, supported by experimental demonstration that this epoxide can be converted to BDE under standard reaction conditions. Newly proposed E2 and SN2' elementary steps were studied to rationalize the formation of BDE and all detected side-products. Additionally, using quantum mechanics/molecular mechanics (QM/MM) calculations, we modeled silica-supported phosphate catalysts to study the effect of the alkali metal center. Natural population analysis showed that phosphate oxygen atoms are more negatively charged in CsH2PO4/SiO2 than in H3PO4/SiO2. In combination with temperature-programmed desorption experiments using CO2, the results of this study suggest that the improved selectivity achieved when adding the metal center is related to an increase in the basicity of the catalyst.

butadiene↗
DOE OSTI2024

Acetylene ligands stabilize atomically dispersed supported rhodium complexes under harsh conditions

Facile sintering of atomically dispersed supported noble metal catalysts at catalytically relevant temperatures, particularly under reducing conditions, poses a challenge for their practical applications. Some ligands, such as carbonyls, aid in improving the stability at the expense of severely suppressing the catalytic activity. In this work, we demonstrate that substitution of the carbonyl ligands with reactive acetylene ligands can maintain the atomic dispersion of the supported mononuclear rhodium complex under harsh reducing conditions (>573 K), as confirmed by in-situ X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopies. In contrast, the supported rhodium carbonyl complex aggregates into nanoclusters under identical conditions. Furthermore, our results indicate that the acetylene ligands provide this anti-sintering ability while retaining the hydrogenation activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Assessing metal nitrides and metal carbides as supports for thermally stable single-atom catalysts

Single-atom catalysts supported on metal oxides have been demonstrated to exhibit exceptional activity while also maintaining single-atom stability. However, alternative supports such as metal nitrides and carbides have received far less attention. Herein, we use density functional theory to systematically investigate the relative thermal stability of single-atom catalysts over a host of transition metal nitride and carbide supports. By considering the binding and dimerization energies of isolated transition metal atoms across various surface facets, we identify transition metal/support pairs that show the most promise for high-density single-atom catalysts. We find that transition metal atoms can be stabilized on both defect sites and pristine surfaces over transition metal nitrides and carbides. Furthermore, we identify promising metal/support pairings that may be suitable for achieving both stable and high-density single-atom catalysts. Furthermore, these results provide valuable insights to guide synthesis efforts towards achieving stable single-atom transition metal catalysts.

Density functional theory↗
DOE OSTI2025

Plastic-waste hydrogenolysis over two-dimensional MXene-supported ruthenium catalysts with tunable interlayer spacing

The hydrogenolysis of plastics is limited by active-site inaccessibility and inefficient mass transport of bulky polymer chains. To overcome these challenges, this work developed two-dimensional MXene-supported Ru (Ru@MXene) catalysts. Lyophilization of a solution containing dispersed MXene sheets and Ru precursors enabled the confinement of Ru species within the MXene interlayers, which act as pillars to expand the interlayer spacing. Building on this, a silica-pillared MXene-supported Ru (Ru@P-MXene) with even larger interlayer spacing exhibited a reaction rate of 914.9 g C5–C35 g Ru –1 h –1 for the hydrogenolysis of low-density polyethylene (LDPE) into valuable liquid chemicals (e.g., C 5 –C 35 ). A comparison of product yields between Ru@P-MXene and Ru@MXene suggests that elongated Ru particles confined within the MXene support expose their side facets for the reaction. In conclusion, this work demonstrates a new application of MXene in thermochemical catalysis, offering a solution to the challenges of active-site accessibility, mass transport, and reaction confinement in chemical plastic upcycling.

2D materials↗
DOE OSTI2013

A decision-support system for sustainable urban metabolism in Europe

Urban metabolism components define the energy and material exchanges within a city and, therefore, can provide valuable information on the environmental quality of urban areas. Assessing the potential impact of urban planning alternatives on urban metabolism components (such as energy, water, carbon and pollutants fluxes) can provide a quantitative estimation of their sustainability performance. Urban metabolism impact assessment can, therefore, contribute to the identification of sustainable urban structures with regards, for example, to building types, materials and layout, as well as to location and capacity of transportation and infrastructural developments. In this way, it enables the formulation of planning and policy recommendations to promote efficient use of resources and enhance environmental quality in urban areas. The European FP7 project BRIDGE (sustainaBle uRban plannIng Decision support accountinG for urban mEtabolism) has developed a decision-support system (DSS) that systematically integrates urban metabolism components into impact assessment processes with the aim of accurately quantifying the potential effects of proposed planning interventions. The DSS enables integration of multiple spatial and non-spatial datasets (e.g. physical flows of energy and material with variables of social and economic change) in a systematic manner to obtain spatially defined assessment results and to thus inform planners and decision-makers. This multi-criteria approach also enables incorporation of stakeholders' perceptions in order to prioritise decisive assessment criteria. This paper describes the methodological framework used to develop the DSS and critically examines the results of its practical application in five European cities. - Highlights: Black-Right-Pointing-Pointer Urban metabolism in sustainability assessment of planning alternatives. Black-Right-Pointing-Pointer European FP7 project applied to 5 real life case studies across Europe. Black-Right-Pointing-Pointer Decision support system enables incorporating scientific knowledge into planning. Black-Right-Pointing-Pointer Scale, data availability and stakeholder representativeness limit its application.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Web tools concerning performance analysis and planning support for solar energy plants starting from remotely sensed optical images

We present innovative web tools, developed also in the frame of the FP7 ENDORSE (ENergy DOwnstReam SErvices) project, for the performance analysis and the support in planning of solar energy plants (PV, CSP, CPV). These services are based on the combination between the detailed physical model of each part of the plants and the near real-time satellite remote sensing of incident solar irradiance. Starting from the solar Global Horizontal Irradiance (GHI) data provided by the Monitoring Atmospheric Composition and Climate (GMES-MACC) Core Service and based on the elaboration of Meteosat Second Generation (MSG) satellite optical imagery, the Global Tilted Irradiance (GTI) or the Beam Normal Irradiance (BNI) incident on plant's solar PV panels (or solar receivers for CSP or CPV) is calculated. Combining these parameters with the model of the solar power plant, using also air temperature values, we can assess in near-real-time the daily evolution of the alternate current (AC) power produced by the plant. We are therefore able to compare this satellite-based AC power yield with the actually measured one and, consequently, to readily detect any possible malfunctions and to evaluate the performances of the plant (so-called “Controller” service). Besides, the same method can be applied to satellite-based averaged environmental data (solar irradiance and air temperature) in order to provide a Return on Investment analysis in support to the planning of new solar energy plants (so-called “Planner” service). This method has been successfully applied to three test solar plants (in North, Centre and South Italy respectively) and it has been validated by comparing satellite-based and in-situ measured hourly AC power data for several months in 2013 and 2014. The results show a good accuracy: the overall Normalized Bias (NB) is − 0.41%, the overall Normalized Mean Absolute Error (NMAE) is 4.90%, the Normalized Root Mean Square Error (NRMSE) is 7.66% and the overall Correlation Coefficient (CC) is 0.9538. The maximum value of the Normalized Absolute Error (NAE) is about 30% and occurs for time periods with highly variable meteorological conditions. - Highlights: • We developed an online service (Controller) dedicated to solar energy plants real-time monitoring • We developed an online service (Planner) that supports the planning of new solar energy plants • The services are based on the elaboration of satellite optical imagery in near real-time • The validation with respect to in-situ measured hourly AC power data for three test solar plants shows good accuracy • The maximum value of the Normalized Absolute Error is about 30% and occurs for highly variable meteorological conditions.

14 SOLAR ENERGY↗
DOE OSTI2025

Palm oil deoxygenation with glycerol as a hydrogen donor for renewable fuel production using nickel-molybdenum catalysts: The effect of support

Palm oil, one of the most widely used vegetable oils, offers significant potential as a sustainable feedstock for biofuel production. This study explores the deoxygenation of palm oil using glycerol as a hydrogen donor, with nickel-molybdenum (NiMo) catalysts supported on commercial alumina (Al 2 O 3 ), and zeolite (HZSM-5) comparing with self-prepared zirconia (ZrO 2 ). The catalysts were synthesized via incipient wetness impregnation and evaluated for their performance in biofuel production. NiMo/Al 2 O 3 exhibited the lowest oxygen removal efficiency (68.5 %), while NiMo/HZSM-5 achieved a higher oxygen removal (74.3 %) but also demonstrated the highest coke formation. The type of support material influenced the resulting biofuel range, with NiMo/HZSM-5 and NiMo/ZrO 2 favoring jet fuel production, whereas NiMo/Al 2 O 3 was more suitable for diesel production. Notably, NiMo/ZrO 2 exhibited the highest performance in palm oil deoxygenation while minimizing coke formation. These findings highlight NiMo/ZrO 2 as a promising catalyst for efficient and stable biofuel production, with the support material significantly influencing product yield and fuel quality.

36 MATERIALS SCIENCE↗