Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

The effect of proton irradiation on magnetic properties of lithium ferrites

The effect of proton irradiation on magnetic properties of lithium ferrites has been investigated with x-ray diffraction (XRD), magnetization, and Moessbauer spectroscopy measurements. Li{sub 0.5}Fe{sub 2.5}O{sub 4} powders have been fabricated by the sol-gel method. Following the annealing at 700 deg. C, these samples have been proton irradiated with 1, 5, and 10 pC/{mu}m{sup 2}. The analysis of XRD patterns by Rietveld refinement method shows that these samples have ordered cubic spinel structures with space group of P4{sub 3}32. We have observed that the corresponding lattice constant a{sub 0} linearly increases from 8.3301 to 8.3314{+-}0.0001 A with increasing proton irradiation. Compared to nonirradiated sample, which has the saturation magnetization (M{sub s}) of 66.4 emu/g and oxygen occupancy of 3.9980 at room temperature, the values of magnetization and oxygen occupancy at room temperature are 66.0, 62.6, and 60.8 emu/g and 3.9840, 3.9452, and 3.9272, respectively, for 1, 5, and 10 pC/{mu}m{sup 2} irradiated powders. Also, the coercivity (H{sub c}) decreases from 175.6 to 154.0 Oe with increasing proton irradiation. The Moessbauer spectra taken at room temperature show that the values of isomer shift ({delta}) for the tetrahedral (A) and octahedral (B) sites are consistent with the Fe{sup 3+} valence state. The results suggest that the proton irradiation induces the oxygen vacancy defects, which in turn leads to the changes in magnetic properties.

36 MATERIALS SCIENCE↗

Crystal Field Parameters and Energy Levels Calculations for Fe{sup 3+}:ZnGa{sub 2}O{sub 4}

In this paper, we present a theoretical study of the energy levels structure for the zinc gallate normal spinel, ZnGa{sub 2}O{sub 4}, doped with Fe{sup 3+}(3d{sup 5} configuration) ions. The calculations have been performed in the framework of the exchange charge model (ECM) of the crystal field. After calculating the CFPs, based on the geometrical structure of the host matrix, the crystal field Hamiltonian was diagonalized in the space spanned by the wave functions of all 16 LS terms of the 3d{sup 5} electron configurations. The Racah parameters B, C and G parameter of the exchange charge model have been estimated. The results of the theoretical calculations are in satisfactory agreement with the experimental data.

36 MATERIALS SCIENCE↗

Electrical Characteristics CuFe{sub 2}O{sub 4} Thick Film Ceramics Made with Different Screen Size Utilizing Fe{sub 2}O{sub 3} Nanopowder Derived from Yarosite for NTC Thermistor

Fabrication of CuFe{sub 2}O{sub 4} thick film ceramics utilizing Fe{sub 2}O{sub 3} derived from yarosite using screen printing technique for NTC thermistor has been carried out. Effect of thickness variation due to different size of screen (screen 225; 300 and 375 mesh) has been studied. X-ray diffraction analyses (XRD) was done to know crystal structure and phases formation. SEM analyses was carried out to know microstructure of the films. Electrical properties characterization was done through measurement of electrical resistance at various temperatures (room temperature to 100 deg. C). The XRD data showed that the films crystalize in tetragonal spinel. The SEM images showed that the screen with the smaller of the hole size, made the grain size was bigger. Electrical data showed that the larger the screen different size thickness variation (mesh), the larger the resistance, thermistor constant and sensitivity. From the electrical characteristics data, it was known that the electrical characteristics of the CuFe{sub 2}O{sub 4} thick film ceramics followed the NTC characteristic. The value of B and R{sub RT} of the produced CuFe{sub 2}O{sub 4} ceramics namely B = 3241-3484 K and R{sub RT} = 25.6-87.0 M Ohm, fitted market requirement.

36 MATERIALS SCIENCE↗

Structural and magnetic characterizations of Mn{sub 2}CrO{sub 4} and MnCr{sub 2}O{sub 4} films on MgO(001) and SrTiO{sub 3}(001) substrates by molecular beam epitaxy

In this report, we grow MnCr{sub 2}O{sub 4} (124) films, and Mn{sub 2}CrO{sub 4} (214) films, for comparison, on MgO and SrTiO{sub 3} (STO) substrates by oxygen-plasma-assisted molecular beam epitaxy and also carry out the measurements of the magnetization as a function of temperature (5-200 K) and external field (0-5 T) of these films. The results of magnetization versus temperature further show that ferrimagnetic transition (T{sub c}) occurs at 44 K for 214 films grown on both MgO and STO. The T{sub c} of 124 films raises to 45 K but is only observed for the film grown on STO. No or very weak magnetization is observed for the 124 films grown on MgO(001). The vanishing of the magnetization of the 124 films grown on MgO is attributed to the instability of spinel structure for Cr-rich films. Magnetic hysteresis curves of the films further show the magnetization saturation (M{sub s}) of 124 is <1/2 bohr magneton, which is noticeably smaller than the bulk M{sub s} {approx} 1 bohr magneton. The reduction of M{sub s} in these chromites films may result from the cation distribution in that Cr cations distribute in both A and B sites, which is different from the bulk materials. The distribution of Cr cations in both A and B is attributed to the low temperature growth and similar results have been found in previous growth of various ferrite films.

36 MATERIALS SCIENCE↗

Growth and interface phase stability of barium hexaferrite films on SiC(0001)

We have studied interface phase stability of the BaFe{sub 12}O{sub 19} (BaM) thin films grown by molecular beam epitaxy on SiC(0001). The films were epitaxially grown with the following crystallographic relation: BaM(0001) parallel SiC(0001) and BaM(11-20) parallel SiC(11-20). High resolution TEM reveals the existence of two interfacial bands with different structure than BaM. The first band close to SiC is SiO{sub x} while the second has spinel structure and chemically corresponds to Fe{sub 3}O{sub 4}. These findings suggest that at initial growth stages Fe{sub 3}O{sub 4} is more favorable than BaM. Density functional theory modeling of the phase stability of BaM compared to Fe{sub 3}O{sub 4} shows that BaM is only stable at high oxygen partial pressures.

36 MATERIALS SCIENCE↗

Combustion Synthesis of Magnesium Aluminate

In the system MgO-Al{sub 2}O{sub 3}, three compounds MgAl{sub 2}O{sub 4}, MgAl{sub 6}O{sub 10}(also expressed as-Mg{sub 0.4}Al{sub 2.4}O{sub 4}) and MgAl{sub 26}O{sub 40} are well known. Importance of the first two is well established. Magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel is a technologically important material due to its interesting thermal properties. The MgAl{sub 2}O{sub 4} ceramics also find application as humidity sensors. Apart from the luminescence studies, the interest in MgAl{sub 2}O{sub 4} is due to various applications such as humidity-sensing and PEM fuel cells, TL/OSL dosimetry of the ionizing radiations, white light source. Interest in the MgAl{sub 6}O{sub 10} has aroused due to possible use as a substrate for GaN growth. Attempt was made to synthesize these compounds by the combustion synthesis using metal nitrates as oxidizer and urea as a fuel. Compounds MgAl{sub 2}O{sub 4} and MgAl{sub 6}O{sub 10} were formed in a single step, while MgAl{sub 26}O{sub 40} was not formed by this procedure. Activation of MgAl{sub 6}O{sub 10} by rare earth ions like Ce{sup 3+}, Eu{sup 3+} and Tb{sup 3+} and ns{sup 2} ion Pb{sup 2+} could be achieved. Excitation bands for MgAl{sub 6}O{sub 10} are at slightly shorter wavelengths compared to those reported for MgAl{sub 2}O{sub 4}.

36 MATERIALS SCIENCE↗

Experimental and first-principles study on the magnetic and transport properties of Ti-doped Fe{sub 3}O{sub 4} epitaxial films

Structure, magnetic, and transport properties of the epitaxial Fe{sub 3-x}Ti{sub x}O{sub 4} films with x{<=} 0.09 fabricated by reactive co-sputtering were investigated systematically. The lattice constant expands from 0.8360 to 0.8376 nm with x increases from 0 to 0.09. The room-temperature saturation magnetization increases by 31.7%, and the negative magnetoresistance (at 100 K) increases from 3.7% to 6.9% as x increases from 0 to 0.09. The results indicate that Ti atoms might exist at the tetrahedral sites in the spinel structure. Theoretical calculations based on the density-functional theory suggest that the doped Ti on the tetrahedral sites indeed enhances the lattice constant and magnetic moment. Meanwhile, the calculated results also imply that the Ti-doped Fe{sub 3}O{sub 4} has a high spin polarization near 100%.

36 MATERIALS SCIENCE↗

Effect of deviation from stoichiometric composition on structural and magnetic properties of cobalt ferrite, CoxFe3-xO4 (x = 0.2 to 1.0)

The effects of deviation from stoichiometric composition on the structural and magnetic properties of cobalt ferrite, Co{sub x}Fe{sub 3-x}O{sub 4} (x = 0.2 to 1.0), are presented. Both CoFe{sub 2}O{sub 4} and Fe{sub 3}O{sub 4} have a spinel crystal structure, and it might be expected that intermediate compositions would have the same structure. However, results show that synthesis via the ceramic method leads to the development of a secondary {alpha}-Fe{sub 2}O{sub 3} phase. Both structural and magnetic properties are altered depending on the concentration of the {alpha}-Fe{sub 2}O{sub 3} phase. Saturation magnetization is at a maximum for the stoichiometric composition (i.e., x = 1.0) and thereafter decreases with x. In attempts to achieve the properties required for application, the ceramic method offers the ability to selectively adjust the concentrations of both CoFe{sub 2}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3} phases.

36 MATERIALS SCIENCE↗

Impedance response and dielectric relaxation in co-precipitation derived ferrite (Ni,Zn)Fe{sub 2}O{sub 4} ceramics

Dielectric spectra and magnetization hysteresis loops were used to investigate the grain size effect with temperature on the electrical and magnetic response of co-precipitation derived spinel (Ni{sub 0.5}Zn{sub 0.5})Fe{sub 2}O{sub 4} (NZFO) ceramics. Remarkable dielectric relaxation phenomena of non-Debye type have been observed in each NZFO ceramics as confirmed by two kinds of Cole-Cole plots of the 1100 Degree-Sign C sintered samples, mainly due to the electron-hopping mechanism between n-type and p-type carriers and interfacial ion effect when applied an increase of temperature. The high and low response of grain and grain-boundary regions were determined by modeling the impedance experimental results on two equivalent RC circuits taking into account grain deep trap states. By employing the modified Arrhenius equation, activation energy values of different sintering temperatures were calculated and analyzed in combination with oxygen vacancy. In addition, the magnetization of various sintering temperature samples is dominated by cation distribution and surface effect in different particle ranges.

36 MATERIALS SCIENCE↗

Electronic structure of magnetic semiconductor CdCr{sub 2}Te{sub 4}: A possible spin-dependent symmetry filter

We present a theoretical investigation of the electronic and magnetic structure of spinel CdCr{sub 2}Te{sub 4} using density functional theory, its extensions via onsite Hubbard U interactions, and a screened-hybrid-functional exchange potential. We find that the ground state is semiconducting within the latter approach, and within this magnetic-semiconducting system, we compute the complex band structure, finding a slowly decaying evanescent Δ{sup ~}{sub 1} state possibly suitable for realizing a spin-dependent symmetry filter effect.

36 MATERIALS SCIENCE↗

Oxidation behaviour of ferritic stainless steel grade Crofer 22 APU at 700 °C in flowing Ar−75%CO{sub 2}−12%H{sub 2}O

The oxidation of Ferritic Stainless Steel (FSS) grade Crofer 22 APU has been investigated. FSS alloys were exposed to isothermal conditions in a horizontal tube furnace at a 700 °C in flowing Ar−75%CO{sub 2}−12%H{sub 2}O at a pressure of approximately 1 atm. The results showed that the growth of non protective Fe{sub 2}O{sub 3} and spinel was observed after 50 h exposure in the presence of 12% H{sub 2}O. The weight was increased significantly with time of exposure. The formation of different oxides is presented on the interface of the specimen such as MnCr{sub 2}O{sub 4}, Fe{sub 3}O{sub 4} and Fe{sub 2}O{sub 3} were revealed by X-ray diffraction and supported by EDAX analysis. FSS did not form a protective Cr{sub 2}O{sub 3} layer due to water vapour accelerates the kinetics oxidation. Data of microstructure observation is presented and discussed in this paper in term of water vapour effects.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of chromium doped zinc ferrite

Zinc chromium ferrites with chemical formula ZnCr{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) were prepared by Sol - Gel technique. The structural as well as magnetic properties of the synthesized samples have been studied and reported here. The structural characterizations of the samples were analyzed by using X – Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), and Transmission Electron Microscope (TEM). The single phase spinel cubic structure of all the prepared samples was tested by XRD and FTIR. The particle size was observed to decrease from 18.636 nm to 6.125 nm by chromium doping and induced a tensile strain in all the zinc chromium mixed ferrites. The magnetic properties of few samples (x = 0.0, 0.4, 1.0) were investigated using Vibrating Sample Magnetometer (VSM)

36 MATERIALS SCIENCE↗

Optical properties of undoped and Mg doped CuCrO{sub 2} powders synthesized by sol-gel route

In this work, CuCrO{sub 2} was synthesized by sol-gel method using citric acid as a gelling agent. The different parameters like ratio of citric acid to metal ions, calcination temperature, and duration were studied. A green colored powder with particle size around 300 nm was formed at the calcination temperature of 800 °C for four hours duration. The increase in temperature has a profound impact on crystallite size and in turn effected the optical properties. Band gap of the obtained CuCrO{sub 2} has varied from 2.3 to 1.7 eV by increasing the temperature from 800 °C to 900 °C. Doping studies were performed by introducing Mg{sup 2+} ion to substitute Cr{sup 3+} in CuCrO{sub 2}. X-ray powder diffraction and SEM studies on 2% Mg doped samples indicated a clear formation of side phases. According to the X-ray powder patterns, the reflections from side phases were increasing with the increase in doping concentrations of Mg from 2 to 5%. The side phases were found to be MgCr{sub 2}O{sub 4} spinel and CuO. The band gap has decreased for doped samples in comparison to undoped one. In this paper, sol-gel synthesis and characterization by Xray powder diffraction, SEM studies and UV-Vis-Diffuse Reflectance spectra are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of gamma irradiation on dielectric properties of manganese zinc nanoferrites

Naocrystalline ferrites Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.00, 0.25, 0.50, 0.75 and 1.00) were prepared by combustion method. The samples were characterized by XRD technique. The dielectric measurements were carried out in the frequency range 40 Hz to 100 MHz at room temperature. All the measurements were performed before and after gamma {sup 60}Co irradiation. The X-ray diffraction patterns revealed the formation of nanocrystalline and single-phase spinel structure. The lattice parameter decrease with zinc ion concentration and increased after the irradiation due to ferric ions of smaller radius converted to ferrous ions of larger radius. The dielectric behavior is attributed to the Maxwell-Wagner type interfacial polarization. The dielctric contant, dielectric loss and AC conductivity enhanced after the irradiation.

36 MATERIALS SCIENCE↗

Study of structural and electronic properties of Mn{sub 3}O{sub 4}

Using density functional theory calculations we have examined the structural and electronic properties of magnetic spinel Mn{sub 3}O{sub 4}. We have optimized the structure (both volume and c/a ratio) within GGA. Then Coulomb correlations are included in the calculations to study the electronic properties. We observe that both the band gap and magnetic moment increase with the increase in Coulomb correlation due to the increased Jahn-Teller splitting and localization of the single e{sub g} electron of Mn{sup 3+}.

36 MATERIALS SCIENCE↗

Structural and Raman scattering study of Ni-doped CoFe{sub 2}O{sub 4}

Raman scattering measurements were made on polycrystalline CoFe{sub 2}O{sub 4} and Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} ferrites as prepared by solid-state reaction route. Rietveld refined X-ray diffraction pattern confirmed the formation of single-phase and both of the samples perfectly indexed in cubic spinel structure with Fd3m space group. Slight reduction in the lattice parameter of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} has been observed as compared to CoFe{sub 2}O{sub 4}. From Raman scattering spectra, a shoulder like feature has been observed in both of the compounds reveals that octahedral site is occupied by Co, Ni and Fe ions and tetrahedral site is occupied by only Fe ion.

36 MATERIALS SCIENCE↗

Structural and dielectric properties of the lutetium (Lu) and yttrium (Y) doped nickel ferrite

The structural and dielectric characteristics of NiFe{sub 1.925}R{sub 0.075}O{sub 4} (R=Lu,Y) were investigated. The material crystallize in the cubic inverse spinel phase with a very small amount of RFeO{sub 3} (R=Lu,Y) as the additional phase. Frequency variation of the dielectric constant shows the dispersion that can be modeled with a modified Debye's function, which considers the possibility of more than one ion, contributing to the relaxation. Impedance spectroscopic analysis indicates the different relaxation mechanisms, bulk grain and grain-boundary contributions to the electrical conductivity and capacitance of these materials.

36 MATERIALS SCIENCE↗

Effect of Co{sub 2+} substitution in Mg{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles: Study of structural, dielectric and magnetic properties

Polycrystalline samples of Mg{sub 0.5}Zn{sub 0.5−x}Co{sub x}Fe{sub 2}O{sub 4} (0 ≤ x ≤ 0.5) with x varying from 0.0-0.5 synthesized by sol-gel auto ignition method. The X-ray diffraction analysis with Retvield refinement reveals the formation of single phase cubic spinel structure. The frequency dependent of real part of dielectric constant has been measured at room temperature and at 100 °C by using an ac impedance analyzer. Except x = 0.5, an increase in the dielectric constant is observed with increase in Co{sup 2+} substitution. Magnetic response has been seen by vibrating sample magnetometer (VSM) at room temperature. The saturation magnetization (M{sub S}) and coercivity (H{sub C}) increase with increasing the Co{sub 2+} substitution. The cation distribution estimated by Mössbauer spectroscopy shows that Co{sub 2+} and Mg{sub 2+} ions have their preference towards octahedral B site, on the other hand Zn{sub 2+} ions preferentially occupy tetrahedral A site, whereas Fe{sub 3+} ions are randomly distributed over A- and B-site. The as obtained results indicated that the substitution of Co{sub 2+} has brought the significant changes in the structural, electrical and magnetic properties of as prepared Mg-Zn-Co multioxide nanocrystals.

36 MATERIALS SCIENCE↗