Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Small systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Measurements of elliptic and triangular flow in high-multiplicity 3 He+Au collisions at √s NN =200 GeV

We present the first measurement of elliptic (v 2 ) and triangular (v 3 ) flow in high-multiplicity 3 He+Aucollisions at √s NN =200 GeV. Two-particle correlations, where the particles have a large separation in pseudorapidity, are compared in 3 He+Au and in p+p collisions and indicate that collective effects dominate the second and third Fourier components for the correlations observed in the 3 He+Ausystem. The collective behavior is quantified in terms of elliptic v 2 and triangular v 3 anisotropy coefficients measured with respect to their corresponding event planes. The v 2 values are comparable to those previously measured in d+Au collisions at the same nucleon-nucleon center-of-mass energy. Comparisons with various theoretical predictions are made, including to models where the hot spots created by the impact of the three 3 He nucleons on the Au nucleus expand hydrodynamically to generate the triangular flow. The agreement of these models with data may indicate the formation of low-viscosity quark-gluon plasma even in these small collision systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measurement of the J / ψ Polarization with Respect to the Event Plane in Pb-Pb Collisions at the LHC

We study the polarization of inclusive J/ψ produced in Pb-Pb collisions at $\sqrt{^sNN}$ = 5.02 TeV at the LHC in the dimuon channel, via the measurement of the angular distribution of its decay products. We perform the study in the rapidity region 2.5 < y < 4, for three transverse momentum intervals (2 < p T < 4, 4 < p T < 6, 6 < p T < 10 GeV/c) and as a function of the centrality of the collision for 2 < p T < 6 GeV/c. For the first time, the polarization is measured with respect to the event plane of the collision, by considering the angle between the positive-charge decay muon in the J/ψ rest frame and the axis perpendicular to the event-plane vector in the laboratory system. A small transverse polarization is measured, with a significance reaching 3.9σ at low p T and for intermediate centrality values. The polarization could be connected with the behavior of the quark-gluon plasma, formed in Pb-Pb collisions, as a rotating fluid with large vorticity, as well as with the existence of a strong magnetic field in the early stage of its formation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

High-resolution electron time-of-flight spectrometers for angle-resolved measurements at the SQS Instrument at the European XFEL

A set of electron time-of-flight spectrometers for high-resolution angle-resolved spectroscopy was developed for the Small Quantum Systems (SQS) instrument at the SASE3 soft X-ray branch of the European XFEL. The resolving power of this spectrometer design is demonstrated to exceed 10 000 (E/ΔE), using the well known Ne 1s –1 3p resonant Auger spectrum measured at a photon energy of 867.11 eV at a third-generation synchrotron radiation source. At the European XFEL, a width of ~0.5 eV full width at half-maximum for a kinetic energy of 800 eV was demonstrated. It is expected that this linewidth can be reached over a broad range of kinetic energies. An array of these spectrometers, with different angular orientations, is tailored for the Atomic-like Quantum Systems endstation for high-resolution angle-resolved spectroscopy of gaseous samples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Design of the Pacific DC Intertie Wide Area Damping Controller

This study describes the design and implementation of a proof-of-concept Pacific DC Intertie (PDCI) wide area damping controller and includes system test results on the North American Western Interconnection (WI). To damp inter-area oscillations, the controller modulates the power transfer of the PDCI, a ±500 kV DCtransmission line in the WI. The control system utilizes real-time phasor measurement unit feedback to construct a commanded power signal which is added to the scheduled power flow for the PDCI. After years of design, simulations, and development, this controller has been implemented in hardware and successfully tested in both open and closed-loop operation. The most important design specifications were safe, reliable performance, no degradation of any system modes in any circumstances, and improve damping to the controllable modes in the WI. The main finding is that the controller adds significant damping to the modes of the WI and does not adversely affect the system response in any of the test cases. The primary contribution of this paper, to the state of the art research, is the design methods and test results of the first North American real-time control system that uses wide area PMU feedback.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Additional Capacity Value From Synergy of Variable Renewable Energy and Energy Storage

Current capacity markets often consider capacity credits from each resource independently, irrespective of the portfolio of resources, potentially overvaluing or undervaluing the capacity contribution of variable renewable energy (VRE) and energy storage (ES) in the grid. We propose a method for calculating the standalone and integrated capacity value of an added VRE resource with existing ES resources. The difference between the integrated and standalone value is the portfolio effect. This is the additional capacity value gained by the synergy of VRE and the existing fleet. Using chronological dispatch simulations and two different reliability metrics to estimate firm capacity, we demonstrate on a small test system that the portfolio effect can be substantial.

capacity credit↗
DOE OSTI2020

Joint Estimation of Behind-the-Meter Solar Generation in a Community

Distribution grid planning, control, and optimization require accurate estimation of solar photovoltaic (PV) generation and electric load in the system. Most of the small residential solar PV systems are installed behind-the-meter making only the net load readings available to the utilities. This paper presents an unsupervised framework for joint disaggregation of the net load readings of a group of customers into the solar PV generation and electric load. Our algorithm synergistically combines a physical PV system performance model for individual solar PV generation estimation with a statistical model for joint load estimation. The electric loads for a group of customers are estimated jointly by a mixed hidden Markov model (MHMM) which enables modeling the general load consumption behavior present in all customers while acknowledging the individual differences. At the same time, the model can capture the change in load patterns over a time period by the hidden Markov states. The proposed algorithm is also capable of estimating the key technical parameters of the solar PV systems. Our proposed method is evaluated using the net load, electric load, and solar PV generation data gathered from residential customers located in Austin, Texas. Testing results show that our proposed method reduces the mean squared error of state-of-the-art net-load disaggregation algorithms by 67%.

behind-the-meter solar generation↗
DOE OSTI2016

Numbering-Up of Microscale Devices for Megawatt-Scale Supercritical Carbon Dioxide Concentrating Solar Power Receivers

Concentrated solar power (CSP) plants have the potential to reduce the consumption of nonrenewable resources and greenhouse gas emissions in electricity production. In CSP systems, a field of heliostats focuses solar radiation on a central receiver, and energy is then transferred to a thermal power plant at high temperature. However, maximum receiver surface fluxes are low (30–100 W cm -2 ) with high thermal losses, which has contributed to the limited market penetration of CSP systems. Recently, small (~4 cm 2 ), laminated micro pin-fin devices have shown potential to achieve concentrated surface fluxes over 100 W cm -2 using supercritical CO 2 as the working fluid. The present study explores the feasibility of using these microscale unit cells as building blocks for a megawatt-scale (250 MW thermal) open solar receiver through a numbering-up approach, where multiple microscale unit cell devices are connected in parallel. A multiscale model of the full-scale central receiver is developed. The model consists of interconnected unit cell and module level (i.e., multiple unit cells in parallel) submodels which predict local performance of the central receiver. Each full-scale receiver consists of 3000 micro pin-fin unit cells divided into 250 modules. The performance of three different full-scale receivers is simulated under representative operating conditions. The results show that the microscale unit cells have the potential to be numbered up to megawatt applications while providing high heat flux and thermal efficiency. At the design incident flux and surface emissivity, a global receiver efficiency of approximately 90% when heating sCO 2 from 550 °C to 650 °C at an average incident flux of 110 W cm -2 can be achieved.

14 SOLAR ENERGY↗
DOE OSTI2016

SU-F-I-54: Spatial Resolution Studies in Proton CT Using a Phase-II Prototype Head Scanner

Purpose: To characterize the modulation transfer function (MTF) of the pre-clinical (phase II) head scanner developed for proton computed tomography (pCT) by the pCT collaboration. To evaluate the spatial resolution achievable by this system. Methods: Our phase II proton CT scanner prototype consists of two silicon telescopes that track individual protons upstream and downstream from a phantom, and a 5-stage scintillation detector that measures a combination of the residual energy and range of the proton. Residual energy is converted to water equivalent path length (WEPL) of the protons in the scanned object. The set of WEPL values and associated paths of protons passing through the object over a 360° angular scan is processed by an iterative parallelizable reconstruction algorithm that runs on GP-GPU hardware. A custom edge phantom composed of water-equivalent polymer and tissue-equivalent material inserts was constructed. The phantom was first simulated in Geant4 and then built to perform experimental beam tests with 200 MeV protons at the Northwestern Medicine Chicago Proton Center. The oversampling method was used to construct radial and azimuthal edge spread functions and modulation transfer functions. The spatial resolution was defined by the 10% point of the modulation transfer function in units of lp/cm. Results: The spatial resolution of the image was found to be strongly correlated with the radial position of the insert but independent of the relative stopping power of the insert. The spatial resolution varies between roughly 4 and 6 lp/cm in both the the radial and azimuthal directions depending on the radial displacement of the edge. Conclusion: The amount of image degradation due to our detector system is small compared with the effects of multiple Coulomb scattering, pixelation of the image and the reconstruction algorithm. Improvements in reconstruction will be made in order to achieve the theoretical limits of spatial resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

SU-F-T-24: Impact of Source Position and Dose Distribution Due to Curvature of HDR Transfer Tubes

Purpose: Brachytherapy is a highly targeted from of radiotherapy. While this may lead to ideal dose distributions on the treatment planning system, a small error in source location can lead to change in the dose distribution. The purpose of this study is to quantify the impact on source position error due to curvature of the transfer tubes and the impact this may have on the dose distribution. Methods: Since the source travels along the midline of the tube, an estimate of the positioning error for various angles of curvature was determined using geometric properties of the tube. Based on the range of values a specific shift was chosen to alter the treatment plans for a number of cervical cancer patients who had undergone HDR brachytherapy boost using tandem and ovoids. Impact of dose to target and organs at risk were determined and checked against guidelines outlined by radiation oncologist. Results: The estimate of the positioning error was 2mm short of the expected position (the curved tube can only cause the source to not reach as far as with a flat tube). Quantitative impact on the dose distribution is still in the process of being analyzed. Conclusion: The accepted positioning tolerance for the source position of a HDR brachytherapy unit is plus or minus 1mm. If there is an additional 2mm discrepancy due to tube curvature, this can result in a source being 1mm to 3mm short of the expected location. While we do always attempt to keep the tubes straight, in some cases such as with tandem and ovoids, the tandem connector does not extend as far out from the patient so the ovoid tubes always contain some degree of curvature. The dose impact of this may be significant.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Shape Effect in Layering of Solid Solutions in Small Volume: Bismuth–Antimony Alloy

The regularities of the effect of the shape of interphase boundaries in small volume systems on the separation of solutions with an upper critical solution temperature (UCST) are described by the example of Bi–Sb alloy particles with a core–shell configuration. The change in the shape of interphase boundaries is simulated in general by introducing a parameter corresponding to the degree of deviation of the shape of the boundaries from the spherical one. An analysis of the extrema of the Gibbs function revealed regularities in the effect of the shape of the core and shell phases on phase equilibria, the thermodynamic stability of heterogeneous states, and the phase separation diagram. The deviation of the shape of the interphase boundaries from the spherical shape changes the UCST and the mutual solubility of the components. The deformation of the shell of a core–shell particle increases the thermodynamic stability of the heterogeneous state, which contributes to the separation of the solution. The deformation of the core lowers the thermodynamic stability of the heterogeneous state and expands the range of metastable states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Investigating late-stage particle production in pp collisions with balance functions

Balance functions have been regarded in the past as a method of investigating the late-stage hadronization found in the presence of a strongly-coupled medium. They are also used to constrain mechanisms of particle production in large and small collision systems. Charge balance functions for inclusive and identified particle pairs are reported as a function of charged particle multiplicity in proton–proton collisions simulated with the PYTHIA8 and the EPOS4 models. The charge balance functions of inclusive, pion, kaon, and proton pairs exhibit amplitudes and shapes that depend on particle species and differ significantly in the two models due to the different particle production mechanisms implemented in PYTHIA and EPOS. The shapes and amplitudes also evolve with multiplicity in both models. In addition, the evolution of the longitudinal rms width and that of balance functions integrals with multiplicity (and average transverse momentum) feature significant differences in the two models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2011

Demonstration of the BioBaler harvesting system for collection of small-diameter woody biomass

As part of a project to investigate sustainable forest management practices for producing wood chips on the Oak Ridge Reservation (ORR) for the ORNL steam plant, the BioBaler was tested in various Oak Ridge locations in August of 2011. The purpose of these tests and the subsequent economic analysis was to determine the potential of this novel woody biomass harvesting method for collection of small-diameter, low value woody biomass. Results suggest that opportunities may exist for economical harvest of low-value and liability or negative-cost biomass. (e.g., invasives). This could provide the ORR and area land managers with a tool to produce feedstock while improving forest health, controlling problem vegetation, and generating local employment.

09 BIOMASS FUELS↗
DOE OSTI2012

Strategies for International Cooperation in Support of Energy Development in Pacific Island Nations

The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has been partnering with island communities around the world to address the technical, policy, social, and economic hurdles to deploying energy efficiency and renewable energy technologies (RETs) on small, islanded systems. The lessons learned from these partnerships are briefly summarized in this document with the goal of supporting the International Renewable Energy Agency (IRENA) in the development of specific near-term and longer-term strategies for island RET deployment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

PHENIX results on centrality dependence of yields and correlations in d plus Au collisions at root s(NN)=200 GeV

PHENIX has measured the transverse momentum (pT) spectra and two particle angular correlations for high pT particles in d+Au collisions at psNN=200 GeV using the RHIC Year-2008 run data. The azimuthal angle correlations for two particles with a large rapidity gap exhibit a ridge-like structure. Using the pi-0s reconstructed in the EMCal, we have successfully extended the pT reach of the correlation up to 8 GeV/c. We find that the azimuthal anisotropy of hadrons found at low pT persists up to 6 GeV/c with a significant centrality and pT dependence, similar to what was observed in A+A collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

3D-printed, integrated plug-and-play turbine-generator set for very-low-head hydro. Final Technical Report DOE-EMotors-15757-1

Hydro power has been used since the early days of electricity, but is generally limited to very large facilities. There remains a vast array of untapped locations, either rivers, tidal currents, or also man-made facilities where energy harvesting is technically feasible, but still too costly. E-Motors, in partnership with MTI, is developing an integrated design aimed at facilitating manufacturing, installation, and retrofitting. The integrated design includes a rim on the outside of the turbine runner to house the electrical generator rotor, a so-called rim drive. With this approach, a compact, in-line assembly can be produced and placed in straight pipes, without having to resort to elbows, shafts, and outside generators, thus improving efficiency and facilitating assembly. The long term goal of the project is to develop a realistic prototype for market development and start of manufacturing. During this Phase I grant, in collaboration with the University of Wisconsin-Milwaukee (UWM), the team pursued two objectives: First, design and test a small (3”) system in a laboratory at UWM, and second develop a prototype design at higher power between 50 and 100 kW. The tests showed the potential for integrating the generator rotor with the turbine runner. Output power is so far limited due to test conditions, but CFD calculations show good efficiency potential. With the larger system, a number of possibilities were explored, including: a generator design matching the turbine output, and capable of generating a peak of 86 kW from a flow of 136 cfs at 9’ of head; various intake tube geometries, showing that an elliptical shape is quite favorable; removing the hub, something made possible with a rim design, which can improve efficiency by about 10 percentage points.

13 HYDRO ENERGY↗
DOE OSTI2017

Wide Bandgap Semiconductor Detector Optimization for Flash X-Ray Measurements

Charge trapping, resulting in a decreased and spatially dependent electric field, has long been a concern for wide bandgap semiconductor detectors. While significant work has been performed to characterize this degradation at varying temperatures and radiation environments, this work concentrates upon examining the event-to-event response in a flash X-ray environment. The following work investigates if charge trapping is a problem for CZT detectors, with particular emphasis on flash X-ray radiation fields at cold temperatures. Results are compared to a non-flash radiation field, using an Am-241 alpha source and similar temperature transitions. Our ability to determine if a response change occurred was hampered by the repeatability of our flash X-ray systems; a small response change was observed with the Am-241 source. Due to contrast of these results, we are in the process of revisiting the Am-241 measurements in the presence of a high radiation environment. If the response change is more pronounced in the high radiation environment, a similar test will be performed in the flash X-ray environment.

47 OTHER INSTRUMENTATION↗