Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Seeds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

On the Use of Liquid Nitrogen Droplets as Flow Tracers in Cryogenic Flow Facilities at NASA Langley Research Center

The injection of liquid nitrogen droplets to cool the gas temperature in cryogenic wind tunnels is discussed as a method of natural seeding for velocimetry-focused, particle-based, laser diagnostics. Historical observations and issues with seeding are presented for both ground-test facilities of interest in this work at NASA Langley: the 0.3-m Transonic Cryogenic Wind Tunnel (TCT) and the National Transonic Facility (NTF). Recent observations of natural seeding with a Rayleigh scattering instrument are presented in the two facilities, which motivated the purposeful use of a pulse-burst laser system to observe the particles directly with a sequentially operated laser sheet for the first time. Time-resolved image sequences of unevaporated liquid nitrogen droplets were readily acquired for tunnel total temperatures of 200 K and below. The preliminary results promote a discussion on the fitness of these natural particles as flow tracers for either a particle image velocimetry or a particle tracking velocimetry instrument in these high-Reynolds-number facilities.

cryogenic wind tunnels↗
NASA NTRSDate not supplied

The maize rough endosperm6 (rgh6) mutant encodes a predicted DEAD-box RNA helicase

Maize rough endosperm (rgh) mutants have defective seeds with a rough, etched, or pitted endosperm surface. Molecular genetic analysis of this mutant class has identified multiple RNA processing proteins critical to endosperm development. We isolated the rgh6 locus from the UniformMu transposon tagging population. Mutant kernels have reduced grain-fill with defective embryos that fail to germinate. Self-pollination of rgh6 heterozygotes produces mutant seeds at frequency consistent with a single recessive mutation. Molecular mapping localized rgh6 to a 60 kbp interval on chromosome 5. PCR analysis of gene models within the fine-map interval identified a Mutator (Mu) transposon insertion within a predicted DEAD-box RNA helicase gene. A second allele of rgh6 was identified from UniformMu population. Reciprocal crosses between rgh6-umu1 and rgh6-umu2 heterozygotes produces mutant seeds at a frequency consistent with a 3:1 ratio indicating these mutants are allelic. Both rgh6-umu1 and rgh6-umu2 have Mu element insertions at the same insertion site within the DEAD-box RNA helicase gene. However, the terminal inverted repeat sequences are polymorphic between the alleles showing the alleles are independent mutations. We conclude that mutation of the DEAD-box RNA helicase causes the rgh6 phenotype. Further characterization of the rgh6 mutant phenotype and biochemical investigation of the RGH6 protein is expected to give further insights on the roles of RNA processing in endosperm development.

maize↗
DOE OSTI2024

New U.S. Data Tools are Playing a Crucial Role in Decarbonizing Buildings at Speed, Scale, and Low Cost

Preparing buildings for retrofits traditionally requires expensive on-site audits or timeintensive simulation models. As a result, the majority of buildings fail to pursue cost-saving retrofits. To address these barriers, the U.S. Department of Energy (DOE) has introduced the Building Efficiency Targeting Tool for Energy Retrofits (BETTER)-a new, free, on-line tool that utilizes a data-driven analytical engine and user-friendly web interface to automatically analyze a building's monthly energy usage in response to weather conditions. The tool benchmarks a building's electric and fossil energy usage against peers; estimates energy, cost, and emissions reductions at the building and portfolio levels; recommends energy efficiency measures; and prioritizes buildings for net-zero energy retrofits. Thanks to interoperability with the DOE's Standard Energy Efficiency Data (SEED) platform, BETTER is supporting U.S. jurisdictions to prepare buildings for retrofit at speed, scale, and low cost to comply with energy policies. This paper discusses the use of BETTER and SEED by one of the branches of the California state government to streamline a retrofit program across 455 public non-residential buildings to align with state goals to reduce greenhouse gas emissions. It describes the organization's challenge to reduce energy consumption across a geographically diverse, aging portfolio; explores how BETTER and SEED improved workflow efficiency; presents preliminary results, including avoiding audit costs of $3.28 million and developing the groundwork for retrofit projects estimated to prevent emission of 2,271 t CO2e annually; and provides guidance for other jurisdictions seeking similar results.

BETTER↗
DOE OSTI2021

Morphological and Chemical Differentiation between Tunisian Populations of Pinus halepensis , Pinus brutia , and Pinus pinaster

Abstract The lipid fraction of seeds from different pine species and populations was studied regarding total lipid content, fatty acid profile and vitamin E composition. The investigated seeds contained a high percentage of lipid (13.6 to 31.5 %). Lipid fractions were found to be rich in vitamin E, which varied significantly among species and populations. P. halepensis (Ph−Hn) showed the highest content of vitamin E (256.3 mg/kg of seeds) and the uppermost content of α ‐tocopherol (44 mg/kg). However, P. halepensis (Ph−Kas) was the richest in γ ‐tocopherol (204.9 mg/kg). Lipid fractions had a low content of δ ‐tocopherol (1.2 to 3.6 mg/kg. The highest content of γ ‐tocotrienol (∼18 %) was determined for P. halepensis (Ph−Dc and Ph−Hn). Thirteen fatty acids were identified by GC‐FID with significant variation between the investigated species. The linoleic acid was the major fatty acid followed by oleic acid and palmitic acid. The chemical differentiation among species for the composition of fatty acids and vitamin E was confirmed by PCA. Significant correlations were observed between the content of vitamin E and fatty acids and ecological parameters of P. halepensis populations.

Khouja, Mariem↗
DOE OSTI2017

Dendritic Core-Frame and Frame Multimetallic Rhombic Dodecahedra: A Comparison Study of Composition and Structure Effects on Electrocatalysis of Methanol Oxidation

The composition and structure of multimetallic nanostructures can be tailored to enhance electrocatalytic properties. This work reports a seed-mediated synthesis of novel multimetallic dendritic core-frame and frame nanostructures with a rhombic dodecahedral shape for enhanced methanol oxidation reaction (MOR). The synthesis involves in situ formation of Cu seeds and the subsequent selective deposition of Pt and Ru on the edges and vertices of the Cu seeds to generate CuPt and CuPtRu dendritic core-frame nanostructures. The core-frame nanostructures undergo a post acetic acid etching process to form the frame nanostructures. While transmission electron microscopy reveals the morphology and elemental distribution of the nanostructures, X-ray diffraction patterns confirm the alloy compositions of dendritic frames for both the core-frame and frame nanostructures. Compared to the bimetallic CuPt nanostructures, the trimetallic CuPtRu nanostructures lower the onset potential and completely suppress the peak current in the reverse scan for MOR. The CuPtRu alloyed frame nanostructures are the best to prevent Ru leaching compared to the CuPtRu core-frame nanostructures and PtRu catalysts. X-ray photoelectron spectroscopy reveals that all three elements become more electron rich in the frame nanostructures. Thus, further refining the composition ratio of the CuPtRu alloyed dendritic frame nanostructures can lead to more efficient catalysts at a lower cost for MOR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Climate warming threatens the persistence of a community of disturbance-adapted native annual plants

With ongoing climate change, populations are expected to exhibit shifts in demographic performance that will alter where a species can persist. This presents unique challenges for managing plant populations and may require ongoing interventions, including in situ management or introduction into new locations. However, few studies have examined how climate change may affect plant demographic performance for a suite of species, or how effective management actions could be in mitigating climate change effects. Over the course of two experiments spanning 6 yr and four sites across a latitudinal gradient in the Pacific Northwest, United States, here we manipulated temperature, precipitation, and disturbance intensity, and quantified effects on the demography of eight native annual prairie species. Each year we planted seeds and monitored germination, survival, and reproduction. We found that disturbance strongly influenced demographic performance and that seven of the eight species had increasingly poor performance with warmer conditions. Across species and sites, we observed 11% recruitment (the proportion of seeds planted that survived to reproduction) following high disturbance, but just 3.9% and 2.3% under intermediate and low disturbance, respectively. Moreover, mean seed production following high disturbance was often more than tenfold greater than under intermediate and low disturbance. Importantly, most species exhibited precipitous declines in their population growth rates (λ) under warmer-than-ambient experimental conditions and may require more frequent disturbance intervention to sustain populations. Aristida oligantha, a C4 grass, was the only species to have λ increase with warmer conditions. These results suggest that rising temperatures may cause many native annual plant species to decline, highlighting the urgency for adaptive management practices that facilitate their restoration or introduction to newly suitable locations. Frequent and intense disturbances are critical to reduce competitors and promote native annuals’ persistence, but even such efforts may prove futile under future climate regimes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Multi-Step Crystallization of Self-Organized Spiral Eutectics

A method for the solidification of metallic alloys involving spiral self-organization is presented as a new strategy for producing large-area chiral patterns with emergent structural and optical properties, with attention to the underlying mechanism and dynamics. This study reports the discovery of a new growth mode for metastable, two-phase spiral patterns from a liquid metal. Crystallization proceeds via a non-classical, two-step pathway consisting of the initial formation of a polytetrahedral seed crystal, followed by ordering of two solid phases that nucleate heterogeneously on the seed and grow in a strongly coupled fashion. Crystallographic defects within the seed provide a template for spiral self-organization. These observations demonstrate the ubiquity of defect-mediated growth in multi-phase materials and establish a pathway toward bottom-up synthesis of chiral materials with an inter-phase spacing comparable to the wavelength of infrared light. Given that liquids often possess polytetrahedral short-range order, our results are applicable to many systems undergoing multi-step crystallization.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Two early eudicot fossil flowers from the Kamikitaba assemblage (Coniacian, Late Cretaceous) in northeastern Japan

Two new fossil taxa referable to the basal eudicot grade are described from the Kamikitaba locality (ca. 89 MYBP, early Coniacian: Late Cretaceous) in the Ashizawa Formation (Asamigawa Member) of Futaba Group in northeastern Japan. These charcoalified mesofossils exhibit well-preserved three-dimensional structure and were analyzed using synchrotron-radiation X-ray microtomography (SRXTM) at the Advanced Photon Source (APS) to document the composition and internal structure. Cathiaria japonica sp. nov. is represented by infructescence segments that consist of an axis bearing three to four fruits. The capsular fruits are sessile and dehiscent and consist of a gynoecium subtended by a bract. No perianth parts are present. The gynoecium is monocarpellate containing two pendulous seeds. The carpel is ascidiate in the lower half and conduplicate in the upper part, style is deflected abaxially with a dorsiventral suture and a large, obliquely decurrent stigma. Pollen grains are tricolpate with a reticulate exine. The morphological features of Cathiaria are consistent with an assignment to the Buxaceae s. l. (including Didymelaceae). Archaeostella verticillata gen. et sp. nov. is represented by flowers that are small, actinomorphic, pedicellate, bisexual, semi-inferior, and multicarpellate. The floral receptacle is cup shaped with a perigynous perianth consisting of several tepals inserted around the rim. The androecium comprises ca. 120 stamens with clear differentiation into anther and filament. The anthers are basifixed and tetrasporangiate. The gynoecium consists of a whorl of ten conduplicate, laterally connate but distally distinct carpels with a conspicuous dorsal bulge, including a central cavity. The styles are short, becoming recurved with a ventrally decurrent stigma. The fruit type is a follicle. Seeds are ca. 10 per carpel, marginal, pendulous from the broad, oblique summit of the locule. Seeds are small, spindle-shaped, with a chalazal extension, Pollen grains are tricolpate with a reticulate exine pattern, suggesting a relationship to eudicots. The morphological features of Archaeostella indicate a possible relationship to Trochodendraceae in the basal grade of eudicots, although it is uncertain if the anther thecae open by longitudinal slits as in extant Trochodendron. The fossil currently provides the earliest record of the family and documents the presence of Trochodendraceae in eastern Eurasia during the middle part of the Late Cretaceous. Furthermore, the recovery of Cathiaria japonica and Archaeostella verticillata from the Kamikitaba locality suggests that the basal eudicot families Trochodendraceae and Buxaceae s. l. (including Didymelaceae) were differentiated and distributed in eastern Eurasia area during the Late Cretaceous.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Single-Grain Bulk YBa{sub 2}Cu{sub 3}O{sub y} Superconductors Grown by Infiltration Growth Process Utilizing the YbBa{sub 2}Cu{sub 3}O{sub y} + Liquid Phase as a Liquid Source

The top-seeded infiltration growth (IG) processed YBa{sub 2}Cu{sub 3}O{sub y} (Y-123) has several advantages compared to the same material produced by other melt process techniques. There is usually no shrinkage, a limited number of pores, and an uniform secondary phase particle dispersion in the Y-123 matrix. These characteristics of the IG process are very attractive for several industrial applications. In this paper, we produced a large single-grain Y-123 by IG and top seeded melt-growth process. Utilizing commercial YbBa{sub 2}Cu{sub 3}O{sub y} (Yb-123) and a homemade Y{sub 2}BaCuO{sub 5} (Y-211), we produced bulk YBa{sub 2}Cu{sub 3}O{sub y} samples using Yb-123 + liquid (1:1) as a liquid source. Four facet lines on the top surfaces of the as-grown samples indicated a uniform growth from the seed up to sample edges. Magnetization measurements by SQUID magnetometer showed a sharp superconducting transition with T{sub c},{sub onset} at 92.1 K. The critical current density at 77 K and self-field was 39,000 A/cm{sup 2}. Trapped field results confirmed that single grain Y-123 samples were produced utilizing the above process. Our results prove that Yb-123 + liquid (1:1) as a liquid source is effective in producing single grain Y-123 material by IG process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Origin of Interfacial Magnetic Anisotropy in Ta/CoFeB/MgO and Pt/CoFeB/MgO Multilayer Thin Film Stacks

Interfacial perpendicular magnetic anisotropy (PMA) in Pt/Co{sub 40}Fe{sub 40}B{sub 20}/MgO and Ta/Co{sub 40}Fe{sub 40}B{sub 20}/MgO multilayer structures has been researched at various CoFeB layer thicknesses. Magneto-optical Kerr effect (MOKE) and vibrating sample magnetometer (VSM) measurements show that while strong PMA is achieved in Ta/Co{sub 40}Fe{sub 40}B{sub 20}/MgO structure for the thickness of Co{sub 40}Fe{sub 40}B{sub 20} range from 0.5 to 1.0 nm, a very weak PMA is observed in Pt/Co{sub 40}Fe{sub 40}B{sub 20}/MgO film stack for the same Co{sub 40}Fe{sub 40}B{sub 20} thicknesses. Based on the experimental results, the interfacial anisotropy energy in Ta/Co{sub 40}Fe{sub 40}B{sub 20}/MgO (1.17 erg/cm{sup 2}) was found to be almost 2.5× larger than that in Pt/Co{sub 40}Fe{sub 40}B{sub 20}/MgO (0.43 erg/cm{sup 2}). It is accepted that the PMA comes from the seed/ferromagnetic and ferromagnetic/oxide layer interfaces. Thus, the origin of interfacial magnetic anisotropy can be hybridization and/or crystallinity properties at the interfaces in Ta- and Pt-seeded stacks. While the PMA is strong in Pt/Co/MgO structure, it becomes in-plane in Fe-rich Pt/CoFeB/MgO structure. It is deduced that hybridization between 3d-5d (Co-Pt) orbitals is more dominant in Pt/CoFeB interface than 2p-3d (O-Fe) hybridization at CoFeB/MgO interface in Pt-seeded stacks. In addition, the crystallinity was studied by performing high-resolution x-ray diffraction (HR-XRD) technique. The crystal orientations of Ta and Pt are found as (002) and (111), respectively. The ferromagnetic layer might be induced out-of-plane orientation in Ta-seeded stack due to observing highly crystallized MgO (001). Thus, another reason for in-plane magnetic anisotropy in Pt/Co{sub 40}Fe{sub 40}B{sub 20}/MgO might be the absence of MgO crystallization because Pt is crystallized fcc (111) orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Efficacy and Costs of Restoring Wetland Breeding Habitat for Imperiled Amphibians in the Southeastern U.S.

Herbaceous isolated wetlands in the North American Southeastern Coastal Plain are important breeding sites for many imperiled amphibians. However, most are degraded from alterations to historic fire disturbance and hydrologic regimes. Without fire, encroaching woody vegetation can transition wetlands to more terrestrial conditions and negatively impact amphibian breeding habitat, yet few studies have experimentally tested the efficacy, cost, or temporal requirement of current methods to restore herbaceous wetland vegetation. Here, we tested the interaction of manipulating wetland canopy and leaf litter/duff to promote herbaceous vegetation within one year (i.e., one breeding season) in degraded herbaceous wetlands in South Carolina. We assessed plant response via herbaceous cover, composition, and species similarity to the wetland seed bank and then related treatment performance to treatment cost. Removing trees combined with burning, disturbing, or removing duff significantly increased herbaceous cover and proportions of wetland plants and graminoids. Removing trees alone did not improve herbaceous cover compared to closed-canopy controls, and manipulating duff alone had limited positive effects on plant cover and composition. The most expensive yet effective treatment was Tree Removal-Duff Removal, while Tree Removal-Duff Disturbance was the most cost-effective. At a minimum, we recommend removing trees and burning to kickstart herbaceous recovery. Promisingly, comparisons of our data with previous seed bank studies from these same wetlands indicate there was limited seed bank attrition during 30 years of woody encroachment. Results from this study should aid practitioners in choosing wetland restoration techniques to better conserve at-risk species in the Southeastern Coastal Plain.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

In search of genome annotation consistency: solid gene clusters and how to use them

Maintaining consistency in genome annotations is important for supporting many computational tasks, particularly metabolic modeling. The SEED project has implemented a process that improves annotation consistencies across microbial genomes for proteins with conserved sequences and genomic context. In this research report, we describe this process and show how this effort has resulted in improvements to microbial genome annotations in the SEED. We also compare SEED annotation consistencies with other commonly used resources such as IMG (the Joint Genome Institute’s Integrated Microbial Genomes system), RefSeq (the National Center for Biotechnology Information’s Reference Sequence Database), Swiss-Prot (the annotated protein sequence database of the Swiss Institute of Bioinformatics, European Molecular Biology Laboratory and the European Bioinformatics Institute) and TrEMBL (Translated European Molecular Biology Laboratory nucleotide sequence data Library). Our analysis indicates that manual and computational efforts are paying off for the databases where consistency is a major goal.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Techno-Economic Analysis and Global Warming Potential of a Novel Offshore Macroalgae Biorefinery

The success of a large scale macroalgae-based biorefinery is dependent on the demonstration of favorable system economics and environmental sustainability. This study uses detailed process modeling to quantify the mass and energy flows through the various unit operations required for a novel free-floating macroalgae biorefinery concept. The modular process model served as the foundation for the techno-economic and global warming potential analyses used to quantify the sustainability of the proposed concept. This work includes detailed techno-economic results for a complete macroalgae cultivation and conversion system with multiple hatchery configurations and several emerging technologies. System optimization was achieved through the evaluation of various technology options for each unit operation. Technologies considered include traditional twine and textile substrate hatchery configurations, drone assisted seeding and biomass transport, mechanized line seeding and harvesting, adhesive spore mixtures that simplify seeding operations and improve hatchery energetics, and hydrothermal liquefaction to produce upgradable biocrude. Outputs from the system include renewable diesel (R100), naphtha, biochar, nitrogen and phosphorus fertilizers, and aqueous/solid waste streams. Three different system pathways were explored, yielding a biomass production cost ranging from $210 to $565 per dry metric ton and a minimum fuel selling price from $1.35 to $2.91 per liter of gasoline equivalent. Stochastic manipulation of the process model and sensitivity analyses support these results. The global warming potential analysis shows net greenhouse gas emissions ranging from 14 to 29 gCO2-eq MJ-1, supported by stochastic and sensitivity analyses. The recommendations from this work highlight critical areas for research and development investment such that a sustainable macroalgae cultivation and conversion system can be realized.

NOMAD seaweed cultivation, techno-economic analysi↗
DOE OSTI2018

Development of MgO concrete with enhanced hydration and carbonation mechanisms

This study proposed the use of hydration agent (HA) and seeds to improve the hydration and carbonation of reactive magnesium cement (RMC)-based concrete formulations. Hydration of RMC was evaluated by isothermal calorimetry. Water absorption and compressive strength results were used to assess the mechanical performance of RMC-based concrete samples. Quantification of hydrate and carbonate phases was performed via XRD and TGA. Formation and morphology of carbonates were observed via BSE and SEM. In addition to increasing the utilization of RMC in the carbonation reaction and facilitating early strength development, the use of HA formed large carbonate phases, while the addition of seeds improved sample microstructures via the development of dense carbonate networks. The improvements in morphology, microstructure and carbonate content in samples involving the simultaneous use of HA and seeds resulted in 56% lower water absorption values and 46% higher 28-day compressive strengths (70 MPa) in comparison to the control sample.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Combustion plasma electrical conductivity model development for oxy-fuel MHD applications

Oxy-combustion can enable efficient CO2 capture from fossil fuel power plants in combined cycle systems; however, air separation is expensive. In order to directly utilize the high gas temperatures associated with oxy-combustion and offset any oxygen separation penalties, a magnetohydrodynamic (MHD) generator has been proposed as a plant topping cycle. Accurately predicting the electrical conductivity of combustion products with the addition of potassium “seed” compound is necessary to evaluate the performance of this modern approach to MHD. In order to make these predictions, improved species collisional cross-section data (momentum transfer cross-section, MTCS) are needed at relevant conditions. A gas electrical conductivity model for use in open-cycle MHD power generation applications is presented, which makes use of updated MTCS data not represented in previous legacy publications. Based on the results of a detailed review and analysis of currently available MTCS data relevant to open-cycle MHD combustion systems, recommendations have been provided for relevant species and a gas temperature range of 1500-3500 K (~0.13-0.3 eV electron energy). Model predictions utilizing updated MTCS data are validated against limited experimental data found in literature for oxy-combustion with potassium seed compound. Model results are presented from a parametric study, which show the effect of combustion conditions and seeding on ionization processes and gas electrical conductivity, highlighting differences between modern oxy-combustion MHD systems and legacy approaches implementing air-fired combustion and high levels of preheat.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2015

Acute phytotoxicity of seven metals alone and in mixture: Are Italian soil threshold concentrations suitable for plant protection?

Metals can pollute soils in both urban and rural areas with severe impacts on the health of humans, plants and animals living there. Information on metal toxicity is therefore important for ecotoxicology. This study investigated the phytotoxicity of different metals frequently found as pollutants in soils: arsenic, cadmium, chromium, lead, mercury, nickel and zinc. Cucumber (Cucumis sativus), sorghum (Sorghum saccharatum) and cress (Lepidium sativum) seeds were used as models for other plants used in human nutrition such as cereals, rice, fruits and vegetables. The 72-h germination rate and root elongations were selected as short-term ecotoxicological endpoints in seeds exposed to single metals and mixtures. Metals were spiked onto OECD standard soils in concentrations comparable to current Italian contamination threshold concentrations for residential and commercial soils. Arsenic, chromium, mercury and nickel were the most toxic metals in our experimental conditions, particularly to cress seeds (5.172, 152 and 255.4 mg/kg as 72 h IC50 for arsenic, mercury and nickel respectively). Italian limits were acceptable for plant protection only for exposure to each metal alone but not for the mixtures containing all the metals concentrations expected by their respective legislative threshold. The effects of the mixture were class-specific: trends were comparable in dicots but different in monocots. The response induced by the mixture at high concentrations differed from that theoretically obtainable by summing the effects of the individual metals. This might be due to partial antagonism of the metals in soil or to the formation of complexes between the metals, which reduce the bioavailability of the pollutants for plants. - Graphical abstract: Metals investigated: Arsenic, Cadmium, Chromium, Lead, Mercury, Nickel and Zinc. - Highlights: • The short-term phytotoxicity of seven metals was investigated with 3 higher plants. • Italian limits for arsenic and nickel in residential soils can damage plants. • Root elongation is heavily affected by metals. • Italian limits are not suitable for plant protection when metals are in mixture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Recent progress in the design of the K-DEMO divertor

The preliminary conceptual design of the Korean fusion demonstration reactor (K-DEMO) with a major radius of 6.8 m and the fusion power of 2200 MW has been studied since 2012. The overall configuration of the K-DEMO divetor system based on the ITER-like water-cooled tungsten technology is a double-null type symmetric divertor subdivided into 32 toroidal modules for the vertical maintenance. A detached divertor scenario with impurity seeding was considered as the primary approach for the power exhaust to reduce the peak heat flux lower than the engineering limit of 10 MW/m 2 . The power exhaust performance at the scrap off layer was estimated by using UEDGE-2D code, a two-dimensional fluid transport code for collisional edge plasma and neutral species like N, Ne, and Ar. Particle and heat flux on inboard and outboard divertor targets were calculated for the detached cased depending on parameters such as the impurity seeding rate, pumping rate, and the pedestal density. On the other hand, a magnetic solution like X-divertor, snowflake divertor, and super X-divertor to expand the plasma wet area was considered for K-DEMO since the detached divertor increasing a radiation fraction by impurity seeding might be able to be unstable. However, the extremely high current of poloidal coils was required more than the engineering limit, 20 MA, to form magnetic field lines for the alternative divertors. Based on the physical calculation of the edge plasma, engineering analyses were carried out to find out the thermal and structural reliability. The thermo-hydraulic analysis confirmed thermal stability, whether all comprising materials are operating within their allowable temperature windows when the case of the peak heat flux is set to 10 MW/m 2 on the outboard divertor target. The response surface optimization method derived two optimal design candidates employing two kinds of heat sink materials, respectively: the reduced activation ferritic martensitic (RAFM) steel and CuCrZr alloy. Additionally, the drawbacks and merits of the two materials were definite. The optimal design with applying RAFM steel was vulnerable to withstand thermal and mechanical loads since low thermal conductivity caused too thin thickness of the heat sink. On the other hand, the CuCrZr alloy has critical drawbacks in terms of activation and radioactive waste despite its high thermal conductivity. Meanwhile, preliminary electromagnetic (EM) analysis was carried out to estimate the EM loads caused by the abnormal behaviors of plasma since EM loads are one of the most critical external loads for designing a DEMO divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗