Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Flow visualization methods for field test verification of CFD analysis of an open gloveport

Anemometer readings alone cannot provide a complete picture of air flow patterns at an open gloveport. Having a means to visualize air flow for field tests in general provides greater insight by indicating direction in addition to the magnitude of the air flow velocities in the region of interest. Furthermore, flow visualization is essential for Computational Fluid Dynamics (CFD) verification, where important modeling assumptions play a significant role in analyzing the chaotic nature of low-velocity air flow. A good example is shown Figure 1, where an unexpected vortex pattern occurred during a field test that could not have been measured relying only on anemometer readings. Here by, observing and measuring the patterns of the smoke flowing into the gloveport allowed the CFD model to be appropriately updated to match the actual flow velocities in both magnitude and direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Device and methods for writing and erasing analog information in small memory units via voltage pulses

Devices and methods for non-volatile analog data storage are described herein. In an exemplary embodiment, an analog memory device comprises a potential-carrier source layer, a barrier layer deposited on the source layer, and at least two storage layers deposited on the barrier layer. The memory device can be prepared to write and read data via application of a biasing voltage between the source layer and the storage layers, wherein the biasing voltage causes potential-carriers to migrate into the storage layers. After initialization, data can be written to the memory device by application of a voltage pulse between two storage layers that causes potential-carriers to migrate from one storage layer to another. A difference in concentration of potential carriers caused by migration of potential-carriers between the storage layers results in a voltage that can be measured in order to read the written data.

42 ENGINEERING↗
DOE OSTI2018

High-bandwidth prefetcher for high-bandwidth memory

A method for prefetching data into a cache is provided. The method allocates an outstanding request buffer ("ORB"). The method stores in an address field of the ORB an address and a number of blocks. The method issues prefetch requests for a degree number of blocks starting at the address. When a prefetch response is received for all the prefetch requests, the method adjusts the address of the next block to prefetch and adjusts the number of blocks remaining to be retrieved and then issues prefetch requests for a degree number of blocks starting at the adjusted address. The prefetching pauses when a maximum distance between the reads of the prefetched blocks and the last prefetched block is reached. When a read request for a prefetched block is received, the method resumes prefetching when a resume criterion is satisfied.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Journey analysis system and method

The various technologies presented herein relate to determining a location of an individual, or an object, when a GPS may be unavailable/occluded. Readings from a plurality of sensors on a mobile device can be generating a plurality of data (e.g., speed, motion, temperature, biometric, etc.) which can be combined to generate a probability of a user of the mobile device being at a particular location, or not. Sensor readings can be weighted to enable sensors having a large effect on a degree of confidence of the probability of the user being determined to be at a location being given priority (e.g., battery priority) versus those sensors which have lesser effect on the degree of confidence. With the user determined to be at a location, information, a notification, an instruction, etc., can be presented to the user, via the mobile device.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Design and Indoor Validation of DUSST: A Novel Low-Maintenance Soiling Station

This poster shows the design, and the indoor validation of 'DUSST' (Detector Unit for Soiling Spectral Transmittance), a new low-maintenance soiling station. DUSST projects a collimated monochromatic light through a glass surface and on to a light detector to measure the intensity of the transmitted light. As the glass surface naturally soils, the losses are quantified by comparing this soiled reading with a calibrated reading in the baseline clean condition.

14 SOLAR ENERGY↗
DOE OSTI2018

EnergyPlus Performance Improvements via JSON Input Refactoring

EnergyPlus is the flagship whole-building energy simulation program developed by the U.S. Department of Energy. This paper describes the refactoring efforts around the EnergyPlus input processor to natively support JavaScript Object Notation (JSON), allow validation through use of a JSON schema validator, convert and validate typical EnergyPlus input data file (*.idf) files to JSON files, and improve related metrics such as: read time for schema and input files, parse time for processing input, and time to query/return data from EnergyPlus internal data structure. Performance improvements on sample files result in 14% and 60% reduction in schema and input file reads respectively, 36-62% reduction to process input, and 24-99+% query reduction for functions that take advantage of the new format. For the files tested, overall speedup realized as part of this JSON refactor is 1.6x to 5.4x.

Adams, Mark↗
DOE OSTI2018

Straight Line or Not?

Until this spring, I had never heard of the book Factfulness. Then Bill Gates made a big splash in the news by giving each U.S. graduate from college a copy. In reading the book, I found it to be a remarkable combination of hopefulness and commentary about some of our blindspots regarding numeracy, and how we interpret and internalize information in a media-saturated world. If you have not read the book, I recommend it highly—not only for how it can help us think about the world in a more informed and balanced way, but also how it analyzes classic mistakes that we are all prone to. The book describes our instincts to erroneously divide things into groups when distributions are more accurate (the gap instinct), misallocate attention to fear-triggering but low probability events (the fear instinct), plus eight more. But beyond that, Factfulness also presents helpful strategies to tame these debilitating instincts and prevent them from leading us toward false conclusions and perceptions. In this column, I would like to focus on one of these 10 instincts: the straight line instinct, which suggests that we often are tempted to extrapolate patterns with straight lines, when these may not be appropriate. Factfulness gives several examples in which incongruous results are obtained, including one that projects the growth rate of newborns unaltered through adulthood and reaches outlandish heights.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Results of Data Matrix Barcode Testing for Field Applications

For the last few years, researchers at Oak Ridge National Laboratory have been investigating direct-part-marking techniques and barcode specifications that may be applicable for UF6 cylinders. Testing in 2016 and 2017 evaluated how the size of the barcode, read distance, read angle, surface finish of the material, and marking technique impacted barcode readability as measured by commercial off-the-shelf barcode readers. This work recommended a specific combination that was integrated into the 2017 World Nuclear Transport Institute “Standard for UF6 Cylinder Identification.” Parts of the recommendation, such as the suggestion to use laser etching with laser marking ink, were not previously systematically tested to ensure they would remain useful over a cylinder’s entire lifespan. This paper discusses selected qualitative and quantitative results from accelerated environmental testing that tries to confirm that the marking ink and other characteristics of the recommendations would survive the environmental conditions UF6 cylinders often experience.

Garner, James↗
DOE OSTI2018

Single-pass parallel prefix scan with dynamic look back

One embodiment of the present invention performs a parallel prefix scan in a single pass that incorporates variable look-back. A parallel processing unit (PPU) subdivides a list of inputs into sequentially-ordered segments and assigns each segment to a streaming multiprocessor (SM) included in the PPU. Notably, the SMs may operate in parallel. Each SM executes write operations on a segment descriptor that includes the status, aggregate, and inclusive-prefix associated with the assigned segment. Further, each SM may execute read operations on segment descriptors associated with other segments. In operation, each SM may perform reduction operations to determine a segment-wide aggregate, may perform look-back operations across multiple preceding segments to determine an exclusive-prefix, and may perform a scan seeded with the exclusive prefix to generate output data. Advantageously, the PPU performs one read operation per input, thereby reducing the time required to execute the prefix scan relative to prior-art parallel implementations.

Merrill, Duane↗
DOE OSTI2019

Striped Data Analysis Framework

Traditionally, High Energy data analysis is based on the model where data are stored in files and analyzed by running multiple analysis processes, each reading one or more of the data files. This process involves repeated data reduction step, which produces smaller files, which is time consuming and leads to data duplication. We propose an alternative approach to data storage and analysis, based on the Big Data technologies. The idea is to store each element of data once and only once in a distributed scalable database and analyze data by reading only "interesting" pieces of data from the database. To make this approach possible, we developed columnar Striped Data Representation Format as the basis of the framework. Traditional columnar approach allows for efficient analysis of complex data structures. While keeping all the benefits of columnar data representation, striped mechanism goes further by enabling efficient parallelization of computations and flexible dist ribution of data analysis. The framework includes scalable and elastic data storage, compute and user analysis backend components. The framework uses off-the shelf web services and data caching technologies as the compute/data co-location mechanism. Flexible architecture allows the framework run in the cloud using container technologies. The framework offers Python/Jupyter as the user analysis backend platform, but can also run in command line or batch mode. In the article, we will present the results of the FNAL-LDRD-2016-032 FNAL LDRD project, the design, implementation, features and performance characteristics of the Striped Data Analysis Framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Quantum information processing with majorana bound states in superconducting circuits

In a weak link of two s-wave superconductors (SCs) coupled via a time-reversal-invariant (TRI) topological superconducting (TSC) island, a Josephson current can flow due to Cooper pairs tunneling in and out of spatially separated Majorana Kramers pairs (MKPs), which are doublets of Majorana bound states (MBSs). The sign of the resulting Josephson current is fixed by the joint parity of the four Majorana bound states that make up the MKPs on the TSC island. This parity-controlled Josephson effect can be used as a read-out mechanism for the joint parity in Majorana-based quantum computing. For a TSC island with four terminals, the SC leads can address a Majorana superconducting qubit (MSQ) formed by the charge ground states of the TSC island's terminals. Cooper pair splitting enables single-qubit operations, qubit read-out, as well as two-qubit entangling gates. Hence, TSC islands between SC leads may provide an alternative approach to superconducting quantum computation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

AGR 5/6/7 Data Qualification Report for ATR Cycles 162B through 168A

This report provides the qualification status of experimental data for the Advanced Gas Reactor (AGR) 5/6/7 fuel irradiation. AGR-5/6/7 was conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) in support of development and qualification of tri-structural isotropic (TRISO) low-enriched fuel for use in high temperature gas-cooled reactors. The objectives of the AGR-5/6/7 experiments are to: (i) irradiate reference-design fuel particles to support fuel qualification, (ii) establish operating margins for the fuel beyond normal operating conditions, and (iii) provide irradiated-fuel performance data and irradiated-fuel samples for post-irradiation examination (PIE) and safety testing. The test train contains five separate capsules that were independently controlled and monitored. Each capsule contains multiple 12.51-mm-long compacts filled with low enriched uranium carbide/oxide (UCO) TRISO fuel particles. The primary objective of the AGR-5/6 test (Capsules 1, 2, 4, and 5) is to verify successful performance of the reference-design fuel under normal operating conditions. The AGR-7 test (Capsule 3) was designed to explore fuel performance at higher temperatures to demonstrate the capability of the fuel to withstand conditions beyond normal operating conditions in support of plant design and licensing. AGR 5/6/7 will also provide irradiated-fuel performance data on fission-gas release from failed particles during irradiation. The AGR-5/6/7 capsules were irradiated in the ATR northeast flux trap location. The experiment began on February 16, 2018 and ended on July 22, 2020, spanning nine ATR cycles over two and a half years. Thus, the AGR-5/6/7 fuel compacts were irradiated for a total of 360.9 effective full power days. The AGR 5/6/7 experiment was able to remain in the reactor core during all three Powered Axial Locator Mechanism (PALM) cycles (163A, 165A, and 167A) without overheating its fuel compacts. This report includes irradiation monitoring data from nine ATR Cycles: 162B, 163A, 164A, 164B, 165A, 166A, 166B, 167A, and 168A, as stored in the Nuclear Data Management and Analysis System (NDMAS). During irradiation, data records consisted of instantaneous measurements recorded every minute and provided by text files automatically every 2 hours. The AGR 5/6/7 data streams addressed in this report include thermocouple (TC) temperatures, sweep gas data (flow rates [capsule inlet, outlet, and downstream at detector], pressure, and moisture content), and Fission Product Monitoring System (FPMS) data (release rates and release to birth rate ratios [R/Bs]) for each of the five capsules. A total of 94,989,908 TC temperature and sweep gas data records were received and processed by NDMAS for AGR 5/6/7 irradiation. Of these records, 41,593,387 (or 43.7% of the total) met data collection and accuracy requirements and are labeled as Qualified. A total of 57,746,693 TC temperature readings were captured from 54 installed TCs. Among them, 10,034,676 TC temperature records (only 17.4%) were Qualified and 47,701,371 TC temperatures (or 82.6%) are Failed due to 48 TC failures (63.5%) and due to missing values (19.1%). To assess performance of the operational TCs, analysis of daily correlations between TCs found no evidence of virtual junction failure for any TCs. Analyses on control charts of TC temperature differences revealed trending in TC readings for TC2, 4, 5, and 13 in Capsule 3, but there is no conclusive indication of TC drift failure that caused those trends. Therefore, TC control charts are not used to disqualify TC data, but only for users’ consideration. For sweep gas flow rates, a total of 31,519,747 gas flow records (84.4%) are Qualified for use for AGR-5/6/7 experiment; 5,723,468 gas flow records (15.4%) are Failed due mostly to missing values; and 74,641 high sweep gas flow rates (0.2 %) are Trend. A large number of Failed missing TC temperature and gas flow values were caused by an error in the data output script that outputted a ‘NULL’ value when values were unchanged. This problem was fixed during the outage of Cycle 166B, which led to a substantially decreased number of missing values during the last three cycles. Nonetheless, a large amount of non-missing data remained because of the high data acquisition frequency (1-minute) and still provided sufficient data to effectively monitor the experiment as designed. For FPMS data, NDMAS received and processed fission product release and R/B data for nine ATR cycles, when ATR core reached full power during AGR 5/6/7 irradiation. These data consist of 110,388 release rate records and 110,388 R/B records for the twelve radionuclides (Kr 85m, Kr 87, Kr 88, Kr 89, Kr 90, Xe 131m, Xe 133, Xe 135, Xe 135m, Xe 137, Xe 138, and Xe 139) for each of the five capsules. Equivalent numbers of uncertainty records associated the release rates and R/B values were provided. To date, qualification status of the FPMS data stored in the NDMAS dat

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Design Space Exploration of Emerging Memory Technologies for Machine Learning Applications

Memory design space exploration methods study memory systems’ performances and limitations before implementation. The computer memory design space has grown exponentially because of the enormous growth of memory types, memory controllers, and application software. Computer simulators are commonly used for memory design space exploration. However, complex memory simulations take an enormous amount of time. Hence, in this paper, we proposed a machine learning-based design space exploration method for dynamic random-access memory and non-volatile memory systems. We applied our method to the CosmoGAN and LeNet applications to predict the following six memory response parameters: (i) bandwidth, (ii) power, (iii) average latency, (iv) average total latency, (v) memory reads, and (vi) memory writes. Our experimental results show that machine learning models can predict memory response parameter values faster than simulations. We used support vector machine, random forest, and gradient boosting machine learning models. We observed that the support vector machine provides better performance for bandwidth, average latency, and average total latency. The random forest model works better for memory reads and writes. The gradient boosting model provides superior prediction performance for power. We provide a detailed discussion on learning curve characteristics, error analysis, and memory type recommendation.

Hasan, S M Shamimul↗
DOE OSTI2021

BOOSTR: A Dataset for Accelerator Control Systems

The Booster Operation Optimization Sequential Time-series for Regression (BOOSTR) dataset was created to provide a cycle-by-cycle time series of readings and settings from instruments and controllable devices of the Booster, Fermilab's Rapid-Cycling Synchrotron (RCS) operating at 15~Hz. BOOSTR provides a time series from 55 device readings and settings that pertain most directly to the high-precision regulation of the Booster's gradient magnet power supply (GMPS). To our knowledge, this is one of the first well-documented datasets of accelerator device parameters made publicly available. We are releasing it in the hopes that it can be used to demonstrate aspects of artificial intelligence for advanced control systems, such as reinforcement learning and autonomous anomaly detection.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Trigger-DAQ and Slow Controls Systems in the Mu2e Experiment

The muon campus program at Fermilab includes the Mu2e experiment that will search for a charged-lepton flavor violating processes where a negative muon converts into an electron in the field of an aluminum nucleus, improving by four orders of magnitude the search sensitivity reached so far. Mu2e's Trigger and Data Acquisition System (TDAQ) uses otsdaq as its solution. Developed at Fermilab, otsdaq uses the artdaq DAQ framework and art analysis framework, under the-hood, for event transfer, filtering, and processing. otsdaq is an online DAQ software suite with a focus on flexibility and scalability, while providing a multi-user, web-based, interface accessible through the Chrome or Firefox web browser. The detector Read Out Controller (ROC), from the tracker and calorimeter, stream out zero-suppressed data continuously to the Data Transfer Controller (DTC). Data is then read over the PCIe bus to a software filter algorithm that selects events which are finally combined with the data flux that comes froma Cosmic Ray Ve to System (CRV). A Detector Control System (DCS) for monitoring, controlling, alarming, and archiving has been developed using the Experimental Physics and Industrial Control System (EPICS) Open Source Platform. The DCS System has also been itegrated into otsdaq. The installation of the TDAQ and the DCS systems in the Mu2e building is planned for 2021-2022, and a prototype has been built at Fermilab's Feynman Computing Center. We report here on the developments and achievements of the integration of Mu2e's DCS system into the online otsdaq software.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Synchronous High-frequency Distributed Readout For Edge Processing At The Fermilab Main Injector And Recycler

The Main Injector (MI) was commissioned using data acquisition systems developed for the Fermilab Main Ring in the 1980s. New VME-based instrumentation was commissioned in 2006 for beam loss monitors (BLM)[2], which provided a more systematic study of the machine and improved displays of routine operation. However, current projects are demanding more data and at a faster rate from this aging hardware. One such project, Real-time Edge AI for Distributed Systems (READS), requires the high-frequency, low-latency collection of synchronized BLM readings from around the approximately two-mile accelerator complex. Significant work has been done to develop new hardware to monitor the VME backplane and broadcast BLM measurements over Ethernet, while not disrupting the existing operations critical functions of the BLM system. This paper will detail the design, implementation, and testing of this parallel data pathway.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Masked fault detection for reliable low voltage cache operation

Systems, apparatuses, and methods for implementing masked fault detection for reliable low voltage cache operation are disclosed. A processor includes a cache that can operate at a relatively low voltage level to conserve power. However, at low voltage levels, the cache is more likely to suffer from bit errors. To mitigate the bit errors occurring in cache lines at low voltage levels, the cache employs a strategy to uncover masked faults during runtime accesses to data by actual software applications. For example, on the first read of a given cache line, the data of the given cache line is inverted and written back to the same data array entry. Also, the error correction bits are regenerated for the inverted data. On a second read of the given cache line, if the fault population of the given cache line changes, then the given cache line's error protection level is updated.

Ganapathy, Shrikanth↗
DOE OSTI2022

Sharing tuples across independent coordination namespace systems

A system and method for federating a tuple storage database across multiple coordinated namespace (CNS) extended memory storage systems allowing the sharing of tuples and tuple data across independent systems. The method provides a federation service for multiple coordination namespace systems. The method retrieves a tuple from connected independent CNS systems wherein a local CNS Controller sends a read request to the local gatekeeper to retrieve a first tuple and creates a local pending remote record. The local gatekeeper at a requesting node sends a broadcast query to a plurality of remote gatekeepers for the tuple and Remote gatekeepers at remote nodes query in its local CNS for the tuple. The Local gatekeeper process at the requesting node receives results from a plurality of remote gatekeepers for the said tuple and selects one remote gatekeeper to receive the requested tuple and broadcasts a read for tuple data with selected gatekeeper.

Jacob, Philip↗