Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Impact of gasoline composition on the effects of nitric oxide on autoignition and knock in a DISI engine

Modern spark-ignition engines use exhaust gas recirculation (EGR) to dilute the charge and suppress knock, enabling the use of higher compression ratios and/or more optimum combustion phasing for higher efficiency. The effectiveness of EGR is affected by the composition of the fuel and its chemical-kinetic interactions with combustion products. Among those, nitric oxide (NO) has been shown to strongly affect autoignition reactivity. However, the impact of fuel composition of the effect of NO on reactivity is not well-understood. Here, in this study, engine experiments were conducted to assess the impact of NO seeded to the intake on knock-limited operation of two gasoline fuels (high cycloalkane content, or HCA, and high olefin content, or HO). Results showed that compositionally-different fuels responded differently to NO. HCA, which was less knock-limited than HO for NO < 200 ppm, became more knock-limited for NO > 200 ppm. Moreover, it was found that differences in knock between fuels were caused by differences in autoignition chemistry and not in the sequential autoignition process of the end gas that occurs due to thermal stratification. Chemical kinetic simulations were performed to better understand the experimental results. For HCA, intermediate-temperature heat release had a greater impact on autoignition reactivity than low-temperature heat release, while the opposite was observed for HO. For both fuels, NO enhances the magnitude of low-temperature heat release via NO + HO 2 → NO 2 + OH. The effect of NO on reactivity was stronger for HCA because OH produced from NO helped to overcome the OH quenching effect of cyclopentane, a main species in HCA. In contrast, HO had relatively strong inherent low-temperature chemistry arising from iso-octane, which reduced the impact of NO on reactivity. For the range of NO mole fractions tested in this study, in-cylinder NO increased fuel’s knock propensity, especially for fuels with mild low-temperature chemistry.

Autoignition↗
DOE OSTI2025

Study on ammonia and dimethyl ether oxidation and kinetic interaction up to 100 atm

NH 3 and DME dual fuel oxidation and kinetic coupling are experimentally studied by using a supercritical pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm, over a temperature range of 500–900 K, and at fuel-lean and stoichiometric conditions with NH 3 to DME molar ratios of 4 and 0.62, respectively. An HP-Mech model for high-pressure NH3/DME oxidation is developed based on our previous studies and it shows generally better performance than other models in the literature on high-pressure oxidation experiments. Due to DME’s strong low-temperature reactivity, it dramatically enhances the oxidation of NH3 at low temperature. However, the effect of NH 3 on DME oxidation varies with temperature. At low temperatures, NH 3 inhibits low-temperature reactivity by consuming OH radicals. In addition, the NH 2 and NO x formation from NH 3 further suppresses the low-temperature DME reactivity by reducing alkylperoxyl and O 2 QOOH radicals via RO 2 + NH 2 = RO + H 2 NO, RO 2 + NO = RO + NO 2 and O 2 QOOH + NO = 2CH 2 O + HO 2 + NO 2 . At intermediate temperatures, due to enhanced kinetic coupling of NH 2 /NO x /HO 2 chemistry, DME oxidation is significantly promoted. It is found that there are two major NH 2 /NO x /HO 2 coupling pathways for OH radical production brought by NH 3 : (1) NH 2 + HO 2 = H 2 NO + OH and (2) NH 2 + NO 2 = H 2 NO + NO with NO + HO 2 = OH + NO 2 . Moreover, the resulting H 2 NO will further contribute to OH production via the H 2 NO/NO x /HONO coupling pathways: H 2 NO + NO 2 = HNO + HONO, HNO + NO 2 = HONO + NO, and HONO (+M) = OH + NO (+M). These new NH 2 /NO x /HO 2 and H 2 NO/NO x /HONO pathways play a critical role in promoting DME oxidation at intermediate temperatures. Novelty and Significance Statement: Blending NH 3 with DME can significantly enhance the reactivity of NH 3 and facilitate its practical application in advanced internal combustion engines. NH 3 /DME oxidation is studied in a novel supercritical pressure jet-stirred reactor up to 100 atm, a much higher pressure than previous studies. An interesting non-monotonic effect of NH3 addition on fuel oxidation has been found. Unique kinetic couplings of NH2/HO2/NOx and H2NO/NOx/HONO brough by NH3 and DME blending are identified to play important roles in radical generation and reactivity promotion. The valuable experimental data and key kinetics revealed in the current work can tremendously improve our understanding of NH 3 /DME oxidation via NO x /RO 2 and NH 2 / H 2 NO/HO 2 /NO x kinetic couplings at low to intermediate temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sensitivity analysis applied to SiC failure probability in TRISO modeled with BISON

Here, a sensitivity analysis on the failure probability of the Silicon Carbide (SiC) layer in tristructural isotropic (TRISO) nuclear fuel during transient conditions predicted by the BISON fuel performance code is performed. The principal goal of the analysis is to understand the most important parameters dictating SiC failure behavior in BISON during Reactivity Initiated Accidents (RIAs). SiC brittle fracture probability is modeled using Weibull statistics. A total of seven inputs related to SiC failure has been selected for the analysis, including the Weibull statistics parameters, elastic moduli for SiC and Pyrolitic Carbon (PyC) and SiC stress-free temperature. A 1D TRISO BISON model has been established for various reactivity insertions performed at the Nuclear Safety Research Reactor (NSRR). The principal advantage associated with the 1D TRISO model developed in this work is its computational efficiency. The Sobol variance decomposition method is used, and the sensitivity indices are presented for eight different values of the energy deposition. The results show that the two most important parameters impacting the predicted SiC failure probability are the Weibull modulus and the characteristic stress, and a co-variance amongst these parameters is obtained for low reactivity insertions. An additional new finding of this work is that the relative importance of Weibull parameters depends on the energy deposition, and thus reactivity, regime. For low energy depositions, two parameters are of influence on SiC failure probability, while for high energy depositions only one parameter impacts failure probability results. Moreover, optimization of the Weibull modulus and characteristic stress is performed by minimizing the RMSE between BISON failure probability predictions and experimental failure fractions for each energy deposition. This work also demonstrates the validity of the NSRR tests BISON simulations and of the respective sensitivity analysis results as conservative, yet indicative for slower transients characterized by lower deposited energies. Such verification is achieved through the partial extension of the analysis to a group Control Rod Withdrawal reproduced from a previous study. Another novel result of this analysis is that no single set of Weibull parameters can reproduce all reactivity insertion experimental failure results, which is related to the intrinsic nature of SiC failure properties, and a new range for the parameters is proposed to produce a failure probability envelope that encompasses the experimental fractions. Additionaly, this work proposes a new approach for future failure analysis with BISON, consisting in the use of Weibull parameters ranges, rather than fixed sets, along with failure envelopes generation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Effects of isoalcohol blending with gasoline on autoignition behavior in a rapid compression machine: Isopropanol and isobutanol

Alcohols, and particularly isoalcohols, are potentially advantageous blendstocks towards achieving efficient, low-carbon intensity internal combustion engines. Their use in advanced configurations, such as boosted spark-ignition or spark-assisted compression ignition, requires a comprehensive understanding of their blending effects on the low- and intermediate-temperature autoignition behavior of petroleum-derived gasoline. This work reports an experimental and modeling study of such autoignition characteristics quantified in a twin-piston rapid compression machine. Isopropanol and isobutanol are blended into a research-grade gasoline (FACE-F) at oxygenate blend levels of 0 to 30% vol/vol, with tests conducted at pressures of 20 and 40 bar, temperatures from 700 to 1000 K, and dilute stoichiometric fuel loadings. Changes to overall reactivity, including first-stage and main ignition times, and preliminary exothermicity are established, with comparisons made to previous measurements with ethanol-blended FACE-F gasoline. Furthermore, it is found that at low-temperature/NTC conditions (700–860 K) the isoalcohols suppress first-stage reactivity and associated heat release while main ignition times are extended. At NTC/intermediate-temperature (860–1000 K) conditions changes to fuel reactivity are less significant with isopropanol slightly suppressing reactivity and isobutanol promoting ignition. Detailed chemical kinetic modeling is used to interpret the experimental measurements. Overall trends of suppression or promotion in the blending behavior are reasonably captured by the model. Sensitivity and rate of production analyses indicate that at lower temperatures H-atom abstraction reactions from the surrogate fuel molecules (e.g., cyclopentane, isooctane) and the isoalcohols via OH are important leading to TC 3 H 6 OH and IC 4 H 8 OH–C radicals, for isopropanol and isobutanol respectively, which act as scavengers in the system. At higher temperatures, similar chemistries are dominant, but there is an increasing importance of abstraction by HO 2 . The kinetic modeling also indicates that the promoting effect of isobutanol at higher temperatures is due to the increased abstractions at the γ-sites, while at lower temperatures abstraction at the α-site leads to greater reactivity suppression.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Protection against Chemical Warfare Agents and Biological Threats Using Metal–Organic Frameworks as Active Layers

The SARS-CoV-2 pandemic outbreak and the unfortunate misuse of toxic chemical warfare agents (CWAs) highlight the importance of developing functional materials to protect against these chemical and pathogen threats. Metal–organic frameworks (MOFs), which comprise a tunable class of crystalline porous materials built from inorganic nodes and organic linkers, have emerged as a class of heterogeneous catalysts capable of rapid detoxification of multiple classes of these harmful chemical or biological hazards. In particular, zirconium-based MOFs (Zr-MOFs) feature Lewis acidic nodes that serve as active sites for a wide range of catalytic reactions, including the hydrolysis of organophosphorus nerve agents within seconds in basic aqueous solutions. In addition, postsynthetic modification of Zr-MOFs enables the release of active species capable of reacting with and deactivating harmful pathogens. Despite this impressive performance, utilizing Zr- MOFs in powder form is not practical for application in masks or protective uniforms. To address this challenge, our team sought to develop MOF/fiber composite systems that could be adapted for use under realistic operating conditions to protect civilians, military personnel, and first responders from harmful pathogens and chemical warfare agents. Over the last several years, our group has designed and fabricated reactive and biocidal MOF/fiber composites that effectively capture and deactivate these toxic species. In this Account, we describe the evolution of these porous and reactive MOF/fiber composites and focus on key design challenges and considerations. First, we devised a scalable method for the integration of Zr-MOFs onto textile substrates using aqueous precursor solutions and without using pretreated textiles, highlighting the potential scalability of this method. Moving beyond standard textiles, we also developed a microbial synthesis strategy to prepare hierarchically porous MOF/bacterial cellulose nanofiber composite sponges that can both capture and detoxify nerve agents when exposed to contaminated gas flows. The mass loading of the MOF in the nanofibrous composite sponge is up to 90%, affording higher work capacities compared to those of textile-fiber-based composites with relatively lower MOF loadings. Next, we demonstrated that heterogeneous polymeric bases are suitable replacements for volatile liquid bases typically used in solution-phase reactions, and we showed that these composite systems are capable of effectively hydrolyzing nerve agents in the solid state by using only water that is present as humidity. Moreover, incorporating a reactive dye precursor into the composite affords a dual function sensing and detoxifying material that changes color from white to orange upon reaction with the byproduct following nerve agent hydrolysis, demonstrating the versatility of this platform for use in decontamination applications. We then created chlorine-loaded MOF/fiber composites that act as biocidal and reactive textiles that are capable of not only detoxifying sulfur-mustard-based chemical warfare agents and simulants but also deactivating both bacteria and the SARS-CoV-2 virus within minutes of exposure. Lastly, we synthesized a mixed-metal Ti/Zr-MOF coating on cotton fibers to afford a photoactive biocidal cloth that shows fast and broad-spectrum biocidal performance against viruses and Gram-positive and Gram-negative bacteria under visible light irradiation. Given the tunable, multifunctional nature of these MOF/fiber composites, we believe that this Account will offer new insights for the rational design and preparation of functional MOF/fiber composites and pave the way toward the development of next-generation reactive and protective textiles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photocatalytic Transfer Hydrogenation in Water: Insight into Mechanism and Catalyst Speciation

Organometallic catalysts with strong metal-to-ligand charge-transfer (MLCT) optical transitions and reactive metal-hydride bonds provide opportunities for new excited-state reactivity. Toward this end, we have investigated photoinduced transfer hydrogenation reactions for a series of Cp*IrH complexes with functionalized bipyridyl ligands. Overcoming the baseline reactivity of this class of catalyst toward hydrogen evolution in aqueous media presents a major challenge for focusing this photochemical reactivity into desired transformations of more complex organic substrates. In this work, a photochemically induced aqueous ketone reduction catalyzed by [Cp*Ir(bpy)H][Cl] is reported and benchmarked to the competing hydrogen evolution reaction (HER). A detailed mechanistic study is conducted of the reduction of cyclohexanone with sodium formate delivering the reducing equivalent. Examining the kinetic profile of the cyclohexanone reduction revealed an unexpected induction period, suggesting a more complex underlying reaction mechanism where product selectivity was not simply a function of direct competition from a common excited-state reactive intermediate. The reaction kinetics were analyzed by variable time normalization analysis (VTNA), and the catalyst resting state was interrogated through operando light-emitting diode (LED) illumination H-1 NMR spectroscopy. Overall, these and other mechanistic studies provide insight into a photochemical reaction pathway to ketone reduction that is distinct from that previously reported for HER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Improving Carbonate-Promoted C–H Carboxylation Using Mesoporous Carbon Supports

C–H carboxylation is an attractive way to utilize CO 2 for chemical production provided that it does not consume resource-intensive reagents. Alkali carbonates dispersed into the pores of mesoporous supports display strongly basic reactivity under CO 2 , allowing them to be used as base promoters for C–H carboxylation of (hetero)arenes in the absence of other reagents or catalysts. Mesoporous oxides are convenient support materials, but only a relatively small fraction of the dispersed carbonate (ca. 10-20%) is converted to carboxylate products when metal oxide supports are used. Here we compare mesoporous oxide and carbon supports and investigate the dependence of carbonate reactivity on pore structure. We show that using mesoporous carbons supports can increase the carbonate conversion by 2–4x when compared to oxide supports. This improved carbonate reactivity is maintained across a variety of mesoporous carbons with different pore structures (ordered vs. disordered) and pore diameters, indicating that the dispersed carbonate is intrinsically more reactive on the surface of a carbon material compared to an oxide surface. Reaction of the carboxylate products with dimethyl carbonate yields isolable methyl esters as the final product and regenerates the dispersed carbonate. We show that mesoporous carbon supports are robust to at least 5 cycles of successive C–H carboxylation and methylation with dimethyl carbonate. Furthermore, understanding how the support structure affects dispersed carbonate reactivity is valuable for advancing C–H carboxylation toward practical application and utilizing these materials in other CO 2 transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Generating Potent C–H PCET Donors: Ligand-Induced Fe-to-Ring Proton Migration from a Cp*Fe III –H Complex Demonstrates a Promising Strategy

Highly reactive organometallic species that mediate reductive proton-coupled electron transfer (PCET) reactions are an exciting area for development in catalysis, where a key objective focuses on tuning the reactivity of such species. Here, this work pursues ligand-induced activation of a stable organometallic complex toward PCET reactivity. This is studied via the conversion of a prototypical Cp*Fe III –H species, [Fe III (η 5 -Cp*)(dppe)H] + (Cp* = C 5 Me 5 –, dppe = 1,2-bis(diphenylphosphino)ethane), to a highly reactive, S = 1/2 ring-protonated endo-Cp*H–Fe relative, triggered by the addition of CO. Our assignment of the latter ring-protonated species contrasts with its previous reported formulation, which instead assigned it as a hypervalent 19-electron hydride, [Fe III (η 5 -Cp*)(dppe)(CO)H] + . Herein, pulse EPR spectroscopy ( 1,2 H HYSCORE, ENDOR) and X-ray crystallography, with corresponding DFT studies, cement its assignment as the ring-protonated isomer, [Fe I (endo-η 4 -Cp*H)(dppe)(CO)]+. A less sterically shielded and hence more reactive exo-isomer can be generated through oxidation of a stable Fe 0 (exo-η 4 -Cp*H)(dppe)(CO) precursor. Both endo- and exo-ring-protonated isomers are calculated to have an exceptionally low bond dissociation free energy (BDFE C–H ≈ 29 kcal mol –1 and 25 kcal mol –1 , respectively) cf. BDFE Fe–H of 56 kcal mol –1 for [Fe III (η 5 -Cp*)(dppe)H] + . These weak C–H bonds are shown to undergo proton-coupled electron transfer (PCET) to azobenzene to generate diphenylhydrazine and the corresponding closed-shell [Fe II (η 5 -Cp*)(dppe)CO] + byproduct.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Atomic Ordering-Induced Ensemble Variation in Alloys Governs Electrocatalyst On/Off States

The catalytic behavior of a material is influenced by ensembles—the geometric configuration of atoms. Traditional approaches, mainly utilizing solid-solution alloys in electrocatalysis, have often overlooked the challenges posed by concurrent changes in the electronic structure (i.e. d-band center) when the composition is altered. Here, this study introduces a methodology that distinctly separates the geometric effects (i.e. ensembles) from the electronic structure. We compare the reactivity of compositionally identical, but structurally different Pd 3 Bi ordered intermetallic and solid-solution alloys. Remarkably, we find that Pd 3 Bi intermetallics display nearly no reactivity for the methanol oxidation (MOR), while their solid-solution counterparts have significant reactivity. This highlights a unique case where materials with identical chemical compositions demonstrate drastically different catalytic behavior underscoring the critical importance of ensembles in electrocatalysis. Specifically, Pd 3 Bi intermetallics form smaller ensembles (average coordination number: 4.5 ± 1.6) with almost no measurable MOR activity at room temperature, in contrast to the solid-solution Pd 3 Bi that exhibit larger ensembles (average coordination number: 6.8 ± 0.9) and considerable MOR reactivity (0.5 mA cm −2 Pd ). An ordered Pd 3 Bi alloy, with an intermediate ensemble size (average coordination number: 5.3 ± 1.2), displays moderate MOR activity (0.1 mA cm −2 Pd ), further confirming the direct correlation between ensemble size and catalytic activity. Notably, all Pd 3 Bi alloys maintain similar electronic structures, because the chemical composition of the alloys is fixed, indicating that the differences in reactivity are predominantly from changes to the ensemble size. Our findings offer an approach for precisely controlling catalytic activity through manipulating the geometric configuration of the atoms within an alloy, paving the way for more efficient catalyst design.

alloys↗
DOE OSTI2025

Isolation of a Terminal Cobalt Nitride in a Metal–Organic Framework

Transition metal nitrides are reactive intermediates in biological and industrial processes. Chemists have synthesized molecular model complexes of such reactive species to understand their function and electronic requirements for new applications. However, molecular chemistry can suffer from intra- and intermolecular decomposition pathways, which preclude further discovery of unknown reactive species. Metal-organic frameworks offer an opportunity for creating long-lived forms of such species with the vacuum of the pore suppressing degradation while simultaneously enabling substrate access for controlled reactivity studies. Here, in this study, we report the characterization of an elusive terminal cobalt nitride species generated through photolysis or thermolysis of a site-isolated cobalt azide within the evacuated metal-organic framework CoN 3 -MFU-4l. The first crystal structure of such a species is presented, with vibrational, X-ray absorption, and electron paramagnetic resonance spectroscopies providing further direct evidence for its formation while elucidating its electronic structure. The system additionally enables subsequent reactivity studies with selected substrates, revealing a unique ambiphilic behavior for a metal nitride species.

Börgel, Jonas [University of California, Berkeley,↗
DOE OSTI2020

Concerted proton–electron transfer reactions of manganese–hydroxo and manganese–oxo complexes

The enzymes manganese superoxide dismutase and manganese lipoxygenase use MnIII–hydroxo centres to mediate proton-coupled electron transfer (PCET) reactions with substrate. As manganese is earth-abundant and inexpensive, manganese catalysts are of interest for synthetic applications. Recent years have seen exciting reports of enantioselective C–H bond oxidation by Mn catalysts supported by aminopyridyl ligands. Such catalysts offer economic and environmentally-friendly alternatives to conventional reagents and catalysts. Mechanistic studies of synthetic catalysts highlight the role of Mn–oxo motifs in attacking substrate C–H bonds, presumably by a concerted proton–electron transfer (CPET) step. (CPET is a sub-class of PCET, where the proton and electron are transferred in the same step.) Knowledge of geometric and electronic influences for CPET reactions of Mn–hydroxo and Mn–oxo adducts enhances our understanding of biological and synthetic manganese centers and informs the design of new catalysts. In this Feature article, we describe kinetic, spectroscopic, and computational studies of MnIII–hydroxo and MnIV–oxo complexes that provide insight into the basis for the CPET reactivity of these species. Systematic perturbations of the ligand environment around MnIII–hydroxo and MnIV–oxo motifs permit elucidation of structure–activity relationships. For MnIII–hydroxo centers, electron-deficient ligands enhance oxidative reactivity. However, ligand perturbations have competing consequences, as changes in the MnIII/II potential, which represents the electron-transfer component for CPET, is offset by compensating changes in the pKa of the MnII–aqua product, which represents the proton-transfer component for CPET. For MnIV–oxo systems, a multi-state reactivity model inspired the development of significantly more reactive complexes. Weakened equatorial donation to the MnIV–oxo unit results in large rate enhancements for C–H bond oxidation and oxygen-atom transfer reactions. These results demonstrate that the local coordination environment can be rationally changed to enhance reactivity of MnIII–hydroxo and MnIV–oxo adducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Toxicity of hydraulic fracturing wastewater from black shale natural-gas wells influenced by well maturity and chemical additives

Hydraulic fracturing of deep shale formations generates large volumes of wastewater that must be managed through treatment, reuse, or disposal. Produced wastewater liberates formation-derived radionuclides and contains previously uncharacterized organohalides thought to be generated within the shale well, both posing unknown toxicity to human and ecological health. Here, we assess the toxicity of 42 input media and produced fluid samples collected from four wells in the Utica formation and Marcellus Shale using two distinct endpoint screening assays. Broad spectrum acute toxicity was assessed using a bioluminescence inhibition assay employing the halotolerant bacterium Aliivibrio fischeri, while predictive mammalian cytotoxicity was evaluated using a N-acetylcysteine (NAC) thiol reactivity assay. The acute toxicity and thiol reactivity of early-stage flowback was higher than later produced fluids, with levels diminishing through time as the natural gas wells matured. Acute toxicity of early stage flowback and drilling muds were on par with the positive control, 3,5-dichlorophenol (6.8 mg L -1 ). Differences in both acute toxicity and thiol reactivity between paired natural gas well samples were associated with specific chemical additives. Samples from wells containing a larger diversity and concentration of organic additives resulted in higher acute toxicity, while samples from a well applying a higher composition of ammonium persulfate, a strong oxidizer, showed greater thiol reactivity, predictive of higher mammalian toxicity. Both acute toxicity and thiol reactivity are consistently detected in produced waters, in some cases present up to nine months after hydraulic fracturing. These results support that specific chemical additives, the reactions generated by the additives, or the constituents liberated from the formation by the additives contribute to the toxicity of hydraulic fracturing produced waters and reinforces the need for careful consideration of early produced fluid management.

03 NATURAL GAS↗
DOE OSTI2024

Effect of f -element complexation on the radiolysis of 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP])

A systematic study of the impact on the chemical reactivity of the oxidising n-dodecane radical cation (RH˙ + ) with f-element complexed 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) has been undertaken utilizing time-resolved electron pulse radiolysis/transient absorption spectroscopy and high-level quantum mechanical calculations. Lanthanide ion complexed species, [Ln((HEH[EHP]) 2 ) 3 ], exhibited vastly increased reactivity (over 10× faster) in comparison to the non-complexed ligand in n-dodecane solvent, whose rate coefficient was k = (4.66 ± 0.22) × 10 9 M -1 s -1 . Similar reactivity enhancement was also observed for the corresponding americium ion complex, k = (5.58 ± 0.30) × 10 10 M -1 s -1 . The vastly increased reactivity of these f-element complexes was not due to simple increased diffusion-control of these reactions; rather, enhanced hole transfer mechanisms for the complexes were calculated to become energetically more favourable. Interestingly, the observed reactivity trend with lanthanide ion size was not linear; instead, the rate coefficients showed an initial increase (Lu to Yb) followed by a decrease (Tm to Ho), followed by another increase (Dy to La). This behaviour was excellently predicted by the calculated reaction volumes of these complexes. In conclusion, complementary cobalt-60 gamma irradiations for select lanthanide complexes demonstrated that the measured kinetic differences translated to increased ligand degradation at steady-state timescales, affording ~38% increase in ligand loss of a 1:1 [La((HEH[EHP]) 2 ) 3 ]: HEH[EHP] ratio system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

AFM-IR and s-SNOM-IR measurements of chemically addressable monolayers on Au nanoparticles

The performance of catalysts depends on their nanoscale properties, and local variations in structure and composition can have a dramatic impact on the catalytic reactivity. Therefore, probing the localized reactivity of catalytic surfaces using high spatial resolution vibrational spectroscopy, such as infrared (IR) nanospectroscopy and tip-enhanced Raman spectroscopy, is essential for mapping their reactivity pattern. Two fundamentally different scanning probe IR nanospectroscopy techniques, namely, scattering-type scanning near-field optical microscopy (sSNOM) and atomic force microscopy-infrared spectroscopy (AFM-IR), provide the capabilities for mapping the reactivity pattern of catalytic surfaces with a spatial resolution of ~20 nm. Herein, we compare these two techniques with regard to their applicability for probing the vibrational signature of reactive molecules on catalytic nanoparticles. For this purpose, we use chemically addressable self-assembled molecules on Au nanoparticles as model systems. We identified significant spectral differences depending on the measurement technique, which originate from the fundamentally different working principles of the applied methods. While AFM-IR spectra provided information from all the molecules that were positioned underneath the tip, the s-SNOM spectra were more orientation-sensitive. Due to its field-enhancement factor, the s-SNOM spectra showed higher vibrational signals for dipoles that were perpendicularly oriented to the surface. The s-SNOM sensitivity to the molecular orientation influenced the amplitude, position, and signal-to-noise ratio of the collected spectra. Ensemble-based IR measurements verified that differences in the localized IR spectra stem from the enhanced sensitivity of s-SNOM measurements to the adsorption geometry of the probed molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Experimental Study of the Effect of Start of Injection and Blend Ratio on Single Fuel Reformate RCCI

Abstract A new concept of single fuel reactivity-controlled compression ignition (RCCI) has been proposed through the catalytic partial oxidation (CPOX) reformation of diesel fuel. The reformed fuel mixture is then used as the low reactivity fuel and diesel itself is used as the high reactivity fuel. In this paper, two reformate mixtures from the reformation of diesel were selected for further analysis. Each reformate fuel mixture contained a significant fraction of inert gases (89% and 81%). The effects of the difference in the molar concentrations of the reformate mixtures were studied by experimenting with diesel as the direct injected fuel in RCCI over a varying start of injection timings and different blend ratios (i.e., the fraction of low and high reactivity fuels). The reformate mixture with the lower inert gas concentration had earlier combustion phasing and shorter combustion duration at any given diesel start of injection timing. The higher reactivity separation between reformate mixture and diesel, compared with gasoline and diesel, causes the combustion phasing of reformate-diesel RCCI to be more sensitive to the start of injection timing. The maximum combustion efficiency was found at a CA50 before top dead center (TDC), whereas the maximum thermal efficiency occurs at a CA50 after TDC. The range of energy-based blend ratios in which reformate-diesel RCCI is possible is between 25% and 45%, limited by ringing intensity (RI) at the low limit of blend ratios, and coefficient of variance (COV) of net indicated mean effective pressure (IMEPn) and combustion efficiency at the high limit. Intake boosting becomes necessary due to the oxygen deficiency caused by the low energy density of the reformate mixtures as it displaces intake air.

Engineering↗
DOE OSTI2023

Characterization of a monoclonal antibody specific to California serogroup orthobunyaviruses and development as a chimeric immunoglobulin M-positive control in human diagnostics

ABSTRACT California serogroup viruses (CSGVs) of medical importance in the United States include La Crosse virus, Jamestown Canyon virus (JCV), California encephalitis virus, and snowshoe hare virus. Current diagnosis of CSGVs relies heavily on serologic techniques for detecting immunoglobulin M (IgM), an indication of a recent CSGV infection. However, human-positive control sera reactive to viruses in the serogroup are scarce because detection of recent infections is rare. Here, we describe the development of new murine monoclonal antibodies (MAbs) reactive to CSGVs and the engineering of a human-murine chimeric antibody by combining the variable regions of the broadly CSGV cross-reactive murine MAb, 3-3B6/2-3B2 and the constant region of the human IgM. MAb 3-3B6/2-3B2 recognizes a tertiary epitope on the Gn/Gc heterodimer, and epitopes important in JCV neutralization were mapped to the Gc glycoprotein. This engineered human IgM constitutively expressed in a HEK-293 stable cell line can replace human-positive control sera in diagnostic serological techniques such as IgM antibody capture enzyme-linked immunosorbent assay (MAC-ELISA). Compared to the parent murine MAbs, the human-chimeric IgM antibody had identical serological activity to CSGVs in ELISA and demonstrated equivalent reactivity compared to human immune sera in the MAC-ELISA. Importance Orthobunyaviruses in the California serogroup cause severe neurological disease in children and adults. While these viruses are known to circulate widely in North America, their occurrence is rare. Serological testing for CSGVs is hindered by the limited availability and volumes of human-positive specimens needed as controls in serologic assays. Here, we described the development of a murine monoclonal antibody cross-reactive to CSGVs engineered to contain the variable regions of the murine antibody on the backbone of human IgM. The chimeric IgM produced from the stably expressing HEK293 cell line was evaluated for use as a surrogate human-positive control in a serologic diagnostic test.

Microbiology↗
DOE OSTI2023

Additive-Mixing Fuel Injection (AMFI): A device for robust control and improved performance of high-efficiency LTGC engines

Low-temperature gasoline combustion (LTGC) engines can provide high efficiencies with very low NOx and particulate emissions. Despite these major advantages, methods for controlling LTGC combustion timing, achieving robust autoignition, and good low-load performance have challenged the development of practical LTGC engines. A key reason is that the ideal reactivity of the fuel varies with operating conditions, with low-reactivity fuels working well at high loads and higher-reactivity fuels working better at low loads. This article introduces a new technique called Additive Mixing Fuel Injection (AMFI) that adjusts the reactivity of the gasoline to obtain good performance over the operating map. Moreover, AMFI can provide robust combustion-timing control because it precisely meters very small amounts (0.01–0.6 mm 3 ) of an ignition-enhancing additive into the fuel each engine cycle. The additive used was 2-ethylhexyl nitrate (EHN), a common, inexpensive diesel-fuel ignition improver, but other additives could be used. Because additive amounts are so small, a 2-gal reservoir would be sufficient for medium-duty applications with refilling only at service intervals of about 8000 mi. The AMFI system has been installed on a single-cylinder LTGC research engine and demonstrated to provide robust combustion-timing control over wide ranges of combustion phasing, fueling rate, intake boost, engine speed, and intake temperature. AMFI also increases the fuel’s reactivity sufficiently to greatly reduce or eliminate the need for charge heating, simplifying engine design and significantly increasing thermal efficiency and the maximum load at low-boost conditions. The nitrogen in the EHN produced a modest increase in NOx, but it was mitigated by lower intake temperatures, and NOx emissions remained very low. Finally, the additive increases the sensitivity of autoignition reactions to variations in the local fuel/air mixture within the charge. This allows the use of controlled fuel stratification for improved LTGC-engine performance, and its potential to improve low-load operation was demonstrated.

Dec, John E.↗
DOE OSTI2021

Assessment of MOOSE-Based Tools for Calculating Radial Core Expansion

Radial core expansion in liquid-metal cooled fast reactor systems is a well-known phenomenon that produces strong reactivity feedback effects. An inherently safe reactor design takes advantage of negative reactivity feedback in accident scenarios by utilizing a core restraint system which produces a bowed shape that allows for radial expansion of the fuel regions. Detailed modeling and simulation of core radial expansion itself as well as subsequent reactivity feedback is a challenging task involving contact of many fuel assembly elements and physics feedback from neutronics, thermal hydraulics, and thermal mechanical response. A variety of physics codes have been developed to model aspects of radial core expansion but in general invoke geometrical or physics approximations. No code system currently exists which tightly and robustly couples these physics with enough detail to fully resolve the complex core radial expansion reactivity feedback effects. The future availability of such a code system is of vital importance to fully understanding the reactivity feedback effects that occur due to radial expansion, and consequently to optimizing the design of the core restraint system. A high-fidelity code will also be used to benchmark existing lower fidelity, faster running models to understand their benefits, limitations, and range of applications. A code development path using MOOSE-based tools is proposed in order to leverage the detailed geometry capabilities and natural tight coupling and robustness of MOOSE-based applications for modeling this complex phenomena. While simulation of the full phenomenon involves several physics, an assessment has been initiated on the capabilities and readiness of the currently available Tensor Mechanics module within MOOSE for calculation of the structural mechanical responses which occur within the reactor core. This report focuses on modeling the force-deformation response which mimics the physics of a duct contact deformation, as well as differential thermal expansion which produces a thermal bowed shaped for the fuel assemblies in a core. Simple examples were initially performed such as simple supported beam bending under load. The complexity of examples was progressively increased to better mimic the duct behavior by including a differential thermal example and inclusion of hexagonal cross-sections in the geometry. Further assessment of the structural mechanical response simulation capability is still required for modeling duct contact interactions and irradiation creep and swelling. Companion thermal hydraulic and neutronics assessments will also be required; these activities are planned for future years. Finally, integration of the multiple physics components through MOOSE is required to predict the core radial expansion and subsequent feedback effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗