Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

A study of three finite difference schemes and their role in asynoptic meteorological data assimilation

An investigation of three finite difference methods and their responses to the insertion of simulated satellite data is presented. A simple-one-level barotropic model is used as the forecast model, while the Mintz-Arakawa two-layer model is used to furnish the initial field, the verification fields, and the simulated satellite data. The schemes tested are the Shuman, the Matsuno-TASU, and an implicit scheme devised by McPherson. Results indicate that the schemes react to inserted data as they would react to unfiltered initial fields. Schemes which contain significant implicit viscosity are capable of damping the high frequency oscillations which occur after insertions, but such schemes may cause a loss of information. Schemes which contain less damping capability produce shock waves which damage the forecasts. It is also found that insertion of winds along with temperature data improves the forecast considerably.

Halberstan, I.↗

Reactions of CH3, CH3O, and CH3O2 radicals with O3

Ozone was photolyzed at 253.7 nm at 25 and -52 degrees in the presence of CH4 and O2 to measure the reactions of O3 with CH3, CH3O, and CH3O2. The O(1D) atoms produced in the primary photochemical act react with CH4 to give CH3 radicals which in turn can react with O2 to give CH3O2 and CH3O radicals. At very high O2 to O3 concentration ratios, the quantum yield of O3 disappearance approached 1.0, indicating that O3 reactions with CH3O2 and CH3O are slow. Upper limits to the rate coefficients at 25 degrees were computed. At lower values of the concentration ratio, chain decomposition of O3 occurred which could be explained by the reaction of O3 with CH3 radicals to produce CH2O, O2, and H atoms all the time. The two routes to these products are considered, and the preferred reaction channel is found.

Simonaitis, R.↗

Effect of nature of oxygen interactions on friction of titanium, aluminum, and molybdenum

Friction studies were conducted with a gold pin contacting titanium, aluminum, and molybdenum surfaces after exposure to oxygen with various methods. Oxygen was adsorbed on the surface, it reacted with the surface, and the surface was ion bombarded with oxygen. The presence of oxygen was monitored with Auger spectroscopy. Titanium friction varied with the mode of the metal-oxygen interaction. It was highest with the adsorbed oxygen and least with ion bombardment using oxygen. Aluminum exhibited lower friction values for the reacted and the ion bombarded surfaces than for the surface having the adsorbed layer. With molybdenum the friction coefficients were generally the same despite the nature of the surface treatment with oxygen.

Buckley, D. H.↗

Mixing and combustion of an underexpanded H2 jet in supersonic flow

Theoretical calculations are compared with experimental data in an investigation of the injection, mixing, and combustion of an underexpanded hydrogen jet in a supersonic test stream. The experimental tests in reacting and nonreacting flows were conducted by use of air and nitrogen as test media. Tests were conducted in a free jet and a ducted mode. Theoretical calculations were performed with a modified viscous characteristics analysis. The computer program employs finite rate chemistry and a turbulent viscosity model which varies radially and axially; it handles exit shock waves, expansion fans, and thermal compressions generated in the reacting flow fields. Comparison of the theory and experimental data indicates good agreement for the near flow field; this agreement is directly related to the explicit handling of the near-field shock and expansion waves. Less satisfactory agreement at downstream locations for both free jet and ducted flows is attributed to the lack of continued computation of the shocks and expansions in the far field.

Jenkins, R. V.↗

Simplified ozone detection by chemiluminescence

Ozone is detected by film coated with solid, such as rubrene, that reacts with ozone to degree proportional to concentration in sample gas. Gas flow is stopped, and film is heated to produce light (chemiluminescence) in proportion to amount of reacted material on sensor.

Conway, E. J.↗

Bolted joints in graphite-epoxy composites

All-graphite/epoxy laminates and hybrid graphite-glass/epoxy laminates were tested. The tests encompassed a range of geometries for each laminate pattern to cover the three basic failure modes - net section tension failure through the bolt hole, bearing and shearout. Static tensile and compressive loads were applied. A constant bolt diameter of 6.35 mm (0.25 in.) was used in the tests. The interaction of stress concentrations associated with multi-row bolted joints was investigated by testing single- and double-row bolted joints and open-hole specimens in tension. For tension loading, linear interaction was found to exist between the bearing stress reacted at a given bolt hole and the remaining tension stress running by that hole to be reacted elsewhere. The interaction under compressive loading was found to be non-linear. Comparative tests were run using single-lap bolted joints and double-lap joints with pin connection. Both of these joint types exhibited lower strengths than were demonstrated by the corresponding double-lap joints. The analysis methods developed here for single bolt joints are shown to be capable of predicting the behavior of multi-row joints.

Hart-Smith, L. J.↗

Pollutant formation in fuel lean recirculating flows

An opposed reacting jet combustor (ORJ) was tested at a pressure of 1 atmosphere. A premixed propane/air stream was stabilized by a counterflowing jet of the same reactants. The resulting intensely mixed zone of partially reacted combustion products produced stable combustion at equivalence ratios as low as 0.45. Measurements are presented for main stream velocities of 7.74 and 13.6 m/sec with an opposed jet velocity of 96 m/sec, inlet air temperatures from 300 to 600 K, and equivalence ratios from 0.45 to 0.625. Fuel lean premixed combustion was an effective method of achieving low NOx emissions and high combustion efficiencies simultaneously. Under conditions promoting lower flame temperature, NO2 constituted up to 100 percent of the total NOx. At higher temperatures this percentage decreased to a minimum of 50 percent.

Schefer, R. W.↗

Onboard hydrogen generation for automobiles

Problems concerning the use of hydrogen as a fuel for motor vehicles are related to the storage of the hydrogen onboard a vehicle. The feasibility is investigated to use an approach based on onboard hydrogen generation as a means to avoid these storage difficulties. Two major chemical processes can be used to produce hydrogen from liquid hydrocarbons and methanol. In steam reforming, the fuel reacts with water on a catalytic surface to produce a mixture of hydrogen and carbon monoxide. In partial oxidation, the fuel reacts with air, either on a catalytic surface or in a flame front, to yield a mixture of hydrogen and carbon monoxide. There are many trade-offs in onboard hydrogen generation, both in the choice of fuels as well as in the choice of a chemical process. Attention is given to these alternatives, the results of some experimental work in this area, and the combustion of various hydrogen-rich gases in an internal combustion engine.

Houseman, J.↗

Influence of fuel temperature on supersonic mixing and combustion of hydrogen

Results are presented from an experimental investigation of the influence of fuel stagnation temperature on the mixing and reaction of hydrogen injected transverse to a supersonic flow in a duct. The hydrogen fuel was injected stoichiometrically at stagnation temperatures of 300 K and 800 K from a row of five circular orifices in the duct wall. Detailed measurements in the flow at the duct exit are used to determine the overall amount of mixing accomplished at each of three test conditions. Static pressure distributions are used with duct wall temperatures and heat flux in a one-dimensional analysis to deduce the fraction of fuel reacted along the duct. Results from the one-dimensional analyses of the tests with hot fuel indicated slightly more fuel reacted at the exit; however, differences in the accomplished mixing obtained from integrations of exit surveys were small.

Rogers, R. C.↗

Combustion of hydrogen in a two-dimensional duct with step fuel injectors

An investigation of the combustion of hydrogen perpendicularly injected from step fuel injectors into a Mach 2.72, 2100 K vitiated test gas was conducted. The model simulated the flow between the center and side struts of an integrated scramjet module at Mach 7 flight and an altitude of 29 km. Parametric variation included equivalence ratio, fuel dynamic pressure ratio, and area distribution of the model. The overall area ratio of the model was held constant at 2.87. The data analysis indicated that no measurable improvement in mixing or combustion efficiency was obtained by varying the fuel dynamic pressure ratio from 0.79 to 2.45. Computations indicated approximately 80 percent of the fuel was mixed so that it could react; however, only approximately 50 percent of the mixed fuel actually reacted in two test configurations, and 74 percent in later tests where less area expansion of the flow occurred.

Eggers, J. M.↗

An experimental study of the flow field and pollutant formation in a two dimensional premixed, turbulent flame

Spark shadowgraphs, high-speed schlieren movies, and the tracing of individual eddies were used to study a turbulent reacting shear layer in a premixed propane/air flow. The flow took place in a two-dimensional combustor, and the flame was stabilized behind a rearward facing streamlined step. The data show that in the velocity range 7.5 to 22.5 m/sec the mixing layer is dominated by Brown-Roshko type large coherent structures in both reacting and nonreacting flows. Information on the eddies, the flame, and the distribution of gas concentrations is presented.

Ganji, A. R.↗

Turbulence, combustion, pollutant, and stability characterization of a premixed, step combustor

A two dimensional combustion tunnel was constructed to study a lean premixed turbulent propane/air flame stablized behind a rearward facing step. Studied were: (1) the existence and importance of large coherent structures in turbulent reacting and nonreacting free shear layers behind the steps; (2) the effect of inlet temperature and reference velocity on combustion efficiency; (3) CO, NO2 and NO sub x production in the flame; and (4) the blowout and upstream propagation of the flame. In the ranges studied, the large coherent structures dominated both the reacting and the nonreacting free shear layers behind the step. The growth of the vortices and the propagation of the flamer were intimately linked. Vortex pairing was observed to be one of the mechanisms for introduction of fresh reactants into the shear layer and growth of the shear layer. Probe composition measurements of the flame showed that, in the recirculation zone, the reaction was above 99 percent complete, CO and unburnt hydrocarbons were above the equilibrium level NO sub x concentration was far below the equilibrium level and NO2 comprised a negligible fraction of NO sub x.

Ganji, A. T.↗

Rates of the reactions of 1, 1, 1-trichloroethane /methyl chloroform/ and 1, 1, 2-trichloroethane with OH

Highly purified samples of the two chlorocarbons, trichloroethane and methyl chloroform, were reacted with OH over the temperature range of 278 to 460 K in a discharge-flow system with resonance flourescence detection of OH. Attention is given to the data obtained at various temperature levels and to the graph of Arrhenius' diagram. It is determined that the methyl chloroform reaction was slower and its temperature dependence somewhat steeper than the earlier measurements had indicated, probably due to the presence of faster reacting olefinic impurities in prior studies. Implications for stratospheric ozone reductions by C10-sub-x catalysis and for tropospheric OH-budget are briefly discussed.

Jeong, K.-M.↗

Atmospheric perturbation and control of a shuttle/tethered satellite

A simplified model of the strong atmospheric perturbation of a small satellite attached to the orbiter by a long, rigid tether predicts undesirable uncontrolled libration motions similar to those from sophisticated models. The simplified model is used to compare performance limitations of two simple control systems that rely only on tether tension for three-dimensional control. Because the effects on libration of both the changing kinematic and atmospheric drag torques caused by changing length are largely predictable, the controller that models these changes has substantially better performance. In particular, the altitude variation of the tethered satellite above an oblate earth can be controlled substantially better with a controller that uses a length command adapted to these predictable changes than one that only reacts to tension changes. Also, small amplitude out-of-plane librations, that are coupled only to second-order with changing length, can be damped substantially faster by the controller that periodically commands properly phased length changes than by the controller that only reacts to the second-order changes in tension.

Spencer, T. M.↗

Studies on chemical evolution using carbon suboxide

It was learned that when carbon suboxide polymers react with hydroxylamine in modified sea water the amino acids glycine and lysine are produced and that they react with urea to produce nucleic acid-like substances. These results lead to the supposition that it is possible that carbon suboxide polymers may have accumulated in the primeval sea some three or more billion years ago and were transformed into the procursors of living molecules.

Yanagawa, H.↗

Chemical modification of TiO2 surfaces with methylsilanes and characterization by infrared absorption spectroscopy

Infrared absorption spectra of methylsilanes bonded to a TiO2 powder were obtained. The reacting silanes include Me sub (4-n)SiX sub n (n=1-4; X=Cl, OMe) and hexamethyldisilazane (HMDS). Reactions were performed on hydroxylated-but-anhydrous TiO2 surfaces in the gas phase. IR spectra confirm the presence of a bonded silane layer. Terminal surface OH groups are found to react more readily than bridging OH groups. By-products of the modification adsorp tenaciously to the surface. The various silanes show only small differences in their ability to sequester surface OH groups. Following hydrolysis in moist air, Si-OH groups are observed only for the tetrafunctional silanes.

Finklea, H. O.↗

Surface profile changes of scuffed bearing surfaces

A phase locked interference microscope capable of resolving depth differences to 30 A and planar displacements of 6000 A was constructed for the examination of the profiles of bearing surfaces without physical contact. This instrument was used to determine surface chemical reactivity by applying a drop of dilute alcoholic hydrochloric acid and measuring the profile of the solid surface before and after application of this probe. Scuffed bearing surfaces reacted much faster than unscuffed ones, but bearing surfaces which had been previously exposed to lubricants containing an organic chloride reacted much more slowly. In a separate series of experiments, a number of stainless steel plates were heated in a nitrogen atmosphere to different temperatures and their reactivity examined later at room temperature. The change of surface contour as a result of the probe reaction followed an Arrhenius type relation with respect to heat treatment temperature. This result could have implications on the scuffing mechanism.

Lauer, J. L.↗