Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Precision geodesy and geodynamics using Starlette laser ranging

The French Starlette satellite, launched in February 1975, was the first satellite specifically designed to minimize the effects of nongravitational forces and to obtain the highest possible accuracy for laser range measurements. It has been found that Starlette represents a valuable complement to the U.S. geodetic satellites. In an analysis of Starlette laser ranging data conducted by Marsh and Williamson (1978), it was concluded that by tailoring a gravity model to a specific satellite and observation period, substantial improvements in data fits and, therefore, in orbit accuracy could be achieved. In the present analyses, a tailored gravity model has been derived for Starlette from the data acquired for the 4-year period, 1975-1978. Attention is given to the solution for geodetic and geodynamic parameters and polar motion.

Marsh, J. G.↗

Improved rocket ozonesonde (ROCOZ-A). I - Demonstration of precision

Measurements of the daytime ozone distribution in the stratosphere have been made with an improved rocket ozonesonde (ROCOZ-A). Vertical cumulative ozone as a function of geometric altitude is the basic information content of these measurements. The instrument-to-instrument repeatability of the ozonesonde was determined by two series of four soundings each. At one standard deviation the instrument repeatability averages from 2.0 to 2.5 percent over the entire altitude range of the instrument. The worst measured repeatability is 3.7 percent at 55 km for one of the flight series.

Holland, A. C.↗

High precision GPS orbit determination using March 1985 demonstration data

Preliminary orbit determination for satellites in the U.S. Department of Defense's Global Positioning System has been performed using GPS carrier phase data collected in March-April 1985 at 10 sites in the continental United States. The data were analyzed using a new data processing software package called GIPSY (GPS Inferred Positioning SYstem) and with existing covariance analysis software. Data from one day have been processed with average formal position errors of 1.4 to 3.6 meters. The true errors are probably somewhat larger. Covariance results are presented which suggest that the orbits can be obtained with formal errors under 2 meters after certain software issues are resolved.

Bertiger, W.↗

Precision attitude determination and control using gyros and earth sensor

A novel scheme to estimate the biases present in the gyros and the attitude of three-axis stabilized earth pointing spacecraft using the outputs of gyros and earth sensor is presented. The earth sensor pitch output is averaged every orbit to provide pitch gyro bias correction. Roll and yaw gyro biases are determined by averaging the earth sensor roll output every quarter orbit and suitably combining the four quarter orbit averages obtained in each orbit. Yaw attitude information is also required once every orbit. Simulation studies including error sources due to earth sensor, gyros, yaw sensor and horizon radiance uncertainty in the winter poles showed that attitude determination accuracy of 0.01-0.03 deg (3 sigma) can be achieved about all the axes.

Rajaram, S.↗

Payload isolation and precision pointing for the 1990's

The design of a pointing system that is applicable for a variety of payloads is examined. The system employs a very soft interface coupled with inertial control torques which use reaction wheels or control moment gyros. The fundamental stability and disturbance rejection characteristics of simple gimbal pointing systems and the soft mounted inertially reacting concept are evaluated and compared. It is observed that in simple and two-stage gimbal systems there is dynamic interaction with the basebody and these types of systems are not applicable for a Space Station/Space Platform environment in which system dynamics are uncertain; however, the soft mounted inertially reacting concept minimizes the dynamic interaction with the basebody and retains stability. It is concluded that the soft mounted inertially reacting concept has the pointing accuracy and disturbance isolation of a free flying spacecraft while still obtaining power, communication, orbit maintenance, and servicing from a basebody.

Sirlin, S. W.↗

The design of a precision pointing contol system for the Space Infrared Telescope Facility

The design and performance simulation of the Space Infrared Telescope Facility pointing and control system are described. The system design is constrained by such considerations as image stability, maneuver capability, cryogen lifetime, and structural flexibility. The primary design driver is the requirement to rapidly execute small angle reorientations of the telescope's optical axis. The flexibility of the spacecraft was simulated using a simplified multibody model which provided an approximation of the primary bending modes. The rather conventional attitude control system design of PID type with a 0.5 Hz bandwidth was enhanced to meet the small angle maneuver requirements by the use of three techniques: (1) a feedforward loop to improve the time response; (2) torque shaping to minimize structural excitation; and (3) active image stabilization to remove residual pointing error and jitter. Simulation results indicate that the system has the desired performance and can be designed using techniques and hardware well within the state-of-the-art.

Sridhar, B.↗

Experimental verification of distributed piezoelectric actuators for use in precision space structures

An analytic model for structures with distributed piezoelectric actuators is experimentally verified for the cases of both surface-bonded and embedded actuators. A technique for the selection of such piezoelectric actuators' location has been developed, and is noted to indicate that segmented actuators are always more effective than continuous ones, since the output of each can be individually controlled. Manufacturing techniques for the bonding or embedding of segmented piezoelectric actuators are also developed which allow independent electrical contact to be made with each actuator. Static tests have been conducted to determine how the elastic properties of the composite are affected by the presence of an embedded actuator, for the case of glass/epoxy laminates.

Crawley, E. F.↗

Precise position measurements of Jupiter, Saturn and Uranus systems with the Very Large Array

VLBI observations of the Jovian satellites Europa, Ganymede, and Callisto obtained in 1983, of Titan obtained in 1984, and of Uranus obtained in 1985, all with the VLA at 15 GHz, are used to determine the ephemerides. The results are presented graphically, and it is found that the standard ephemeris reference frame for the outer planets is in error by about -200 marcsec in right ascension.

Muhleman, D. O.↗

Precise positioning capabilities for TOPEX using differential GPS

NASA's Ocean Topographic Experiment (TOPEX), to be launched in 1991, is the first mission designed to reach the decimeter accuracy needed for the solution of the general mean circulation problem. An experimental tracking capability for TOPEX is studied using differential measurements with satellites of the U.S. DOD's Global Positioning System (GPS). Two data types are studied: (1) integrated Doppler from GPS carrier phase, and (2) GPS P-code pseudo-range. Results of covariance analysis predict that with differential GPS techniques, 5-10 cm average TOPEX altitude accuracies can be achieved over data arcs of two hours.

Lichten, S. M.↗

Precise pointing of space telescope using a quadrant detector

A study was done to evaluate the pointing performance of Space Telescope with a quadrant detector used as the fine guidance sensor. The detector, a quadrant digicon, has been proposed as a replacement detector should unforeseen problems develop with the present baseline interferometer design. The detector model is discussed along with the experimental data from which it was derived.

Strikwerda, T. E.↗

High precision low resolution spectrophotometry of Comets Giacobini-Zinner and Halley

Optical window (300 to 1000 nm) observations were made of Comet Halley during 12 to 14 Mar. 1986 by a scanning spectrometer. The results provide accurate spectrophotometric measurements of the principal molecular bands from the 308 nm OH through the 918 nm CN emissions. The observations can be used to tie space derived ultraviolet and groundbased infrared observations to the optical observations and to one another. Additional observations were made of comet Giacobini-Zinner on 30 September 1985 of the same OH band and the 388 nm band of CN. The Swan band sequence ratios are used to test the best models of C2, with different ratios favoring different models, calling into question the assumptions of these very complete models.

Odell, C. R.↗

Automated inspection and precision grinding of spiral bevel gears

The results are presented of a four phase MM&T program to define, develop, and evaluate an improved inspection system for spiral bevel gears. The improved method utilizes a multi-axis coordinate measuring machine which maps the working flank of the tooth and compares it to nominal reference values stored in the machine's computer. A unique feature of the system is that corrective grinding machine settings can be automatically calculated and printed out when necessary to correct an errant tooth profile. This new method eliminates most of the subjective decision making involved in the present method, which compares contact patterns obtained when the gear set is run under light load in a rolling test machine. It produces a higher quality gear with significant inspection time and cost savings.

Frint, Harold↗

High speed, precision motion strategies for lightweight structures

Abstracts of published papers and dissertations generated during the reporting period are compiled. Work on fine motion control was completed. Specifically, real time control of flexible manipulator vibrations were experimentally investigated. A linear model based on the application of Lagrangian dynamics to a rigid body mode and a series of separable flexible modes was examined with respect to model order requirements, and modal candidate selection. State feedback control laws were implemented based upon linear quadratic regulator design. Specification of the closed loop poles in the regulator design process was obtained by inclusion of a prescribed degree of stability in the manipulator model. Work on gross motion planning and control is also summarized. A systematic method to symbolically derive the full nonlinear dynamic equations of motion of multi-link flexible manipulators was developed.

Book, Wayne J.↗

High speed precision motion strategies for lightweight structures

Work during the recording period proceeded along the lines of the proposal, i.e., three aspects of high speed motion planning and control of flexible structures were explored: fine motion control, gross motion planning and control, and automation using light weight arms. In addition, modeling the large manipulator arm to be used in experiments and theory has lead to some contributions in that area. These aspects are reported below. Conference, workshop and journal submissions, and presentations related to this work were seven in number, and are listed. Copies of written papers and abstracts are included.

Book, Wayne J.↗

Helical gears with circular arc teeth: Generation, geometry, precision and adjustment to errors, computer aided simulation of conditions of meshing and bearing contact

The authors have proposed a method for the generation of circular arc helical gears which is based on the application of standard equipment, worked out all aspects of the geometry of the gears, proposed methods for the computer aided simulation of conditions of meshing and bearing contact, investigated the influence of manufacturing and assembly errors, and proposed methods for the adjustment of gears to these errors. The results of computer aided solutions are illustrated with computer graphics.

Litvin, Faydor L.↗

Numerical planetary and lunar ephemerides - Present status, precision and accuracies

Features of the emphemeris creation process are described with attention given to the equations of motion, the numerical integration, and the least-squares fitting process. Observational data are presented and ephemeride accuracies are estimated. It is believed that radio measurements, VLBI, occultations, and the Space Telescope and Hipparcos will improve ephemerides in the near future. Limitations to accuracy are considered as well as relativity features. The export procedure, by which an outside user may obtain and use the JPL ephemerides, is discussed.

Standish, E. Myles, Jr.↗

Digital transmitter - Simple, yet precise

A transmitter developed for operation at high digital transmission speeds is described. It is a complex system that produces a clean waveform with data rates as high as 1 Mb/s; and its design makes it possible to vary all possible modulation schemes by reprogramming a chip, to vary data-transmission rates with the clock frequency, and to shape pulses without distortion. The design, furthermore, can be adapted to very-large-scale-integration (VLSI) fabrication and mass production. A prototype QPSK residual carrier modulation transmitter was fabricated and tested. The purpose was to create a deep null in the data spectrum to transmit a tone or residual carrier along with the modulation.

Davarian, F.↗

Precision cast vs. wrought superalloys

While cast polycrystalline superalloys recommend themselves in virtue of better 'buy-to-fly' ratios and higher strengthening gamma-prime volume fractions than those of wrought superalloys, the expansion of their use into such critical superalloy applications as gas turbine hot section components has been slowed by insufficient casting process opportunities for microstructural control. Attention is presently drawn, however, to casting process developments facilitating the production of defect-tolerant superalloy castings having improved fracture reliability. Integrally bladed turbine wheel and thin-walled turbine exhaust case near-net-shape castings have been produced by these means.

Tien, J. K.↗