Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power maximization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Assessment of Initial Test Conditions for Experiments to Assess Irradiation Assisted Stress Corrosion Cracking Mechanisms

Irradiation-assisted stress corrosion cracking is a key materials degradation issue in today s nuclear power reactor fleet and affects critical structural components within the reactor core. The effects of increased exposure to irradiation, stress, and/or coolant can substantially increase susceptibility to stress-corrosion cracking of austenitic steels in high-temperature water environments. . Despite 30 years of experience, the underlying mechanisms of IASCC are unknown. Extended service conditions will increase the exposure to irradiation, stress, and corrosive environment for all core internal components. The objective of this effort within the Light Water Reactor Sustainability program is to evaluate the response and mechanisms of IASCC in austenitic stainless steels with single variable experiments. A series of high-value irradiated specimens has been acquired from the past international research programs, providing a valuable opportunity to examine the mechanisms of IASCC. This batch of irradiated specimens has been received and inventoried. In addition, visual examination and sample cleaning has been completed. Microhardness testing has been performed on these specimens. All samples show evidence of hardening, as expected, although the degree of hardening has saturated and no trend with dose is observed. Further, the change in hardening can be converted to changes in mechanical properties. The calculated yield stress is consistent with previous data from light water reactor conditions. In addition, some evidence of changes in deformation mode was identified via examination of the microhardness indents. This analysis may provide further insights into the deformation mode under larger scale tests. Finally, swelling analysis was performed using immersion density methods. Most alloys showed some evidence of swelling, consistent with the expected trends for this class of alloy. The Hf-doped alloy showed densification rather than swelling. This observation may be related to the formation of second-phases under irradiation, although further examination is required

36 MATERIALS SCIENCE↗

Wave Excitation Force Prediction Methodology Based on Autoregressive Filters for Real Time Control

This paper presents a wave excitation force prediction methodology for a slider crank power take-off system (PTOS) based on autoregressive filters. This study shows the feasibility of half period and zero crossing prediction of the irregular ocean waves to keep phase lock condition between the generator and the wave excitation force. This is critically important for unidirectional continuous rotation of the generator to maximize energy extraction. Results from the prediction with different filter orders are analyzed to accommodate real time processing requirements. It has been shown that 10th order filter provides the good compromise of accuracy and timely processing.

16 TIDAL AND WAVE POWER↗

Optimization of Processing, Microstructure, and Hardness of an Al–Ce–Ni–Mn–Zr Alloy With Laser Additive Manufacturing

Here, this study examines the processing behavior, microstructure, surface roughness, and hardness properties of an aluminum alloy containing 8.2 Ce, 4.5 Ni, 0.5 Mn, and 0.7 Zr (wt%) fabricated using laser powder bed fusion. Sixty samples were produced across a range of laser powers, scan speeds, and hatch spacings to evaluate their effect on porosity, hardness, and microstructural features. Porosity was measured using X-ray computed tomography, while microstructure and surface roughness were characterized by scanning electron (SEM) and laser confocal microscopy. High dense and cracking-free Al–Ni–Ce alloy was successfully manufactured. Porosity showed a U-shaped dependence on energy input, increasing under both insufficient and excessive melting conditions. Hardness increased with cooling rate due to finer cellular structures and solute redistribution. A general statistical model was developed to capture the relationships between processing parameters and material response. Results identify a narrow processing window defined by laser powers between 350 and 370 W, scan speeds from 1400 to 1800 mm/s, and hatch distances between 0.14 and 0.18 mm. Within this window, porosity is minimized (below 0.01%) and hardness is maximized (up to 160 HV), demonstrating that careful control of these parameters enables dense, high strength aluminum components suitable for demanding structural applications.

Aluminum alloys↗

The Arabidopsis T‐DNA mutant SALK_008491 carries a 14‐kb deletion on chromosome 3 that provides rare insights into the plant response to dynamic light stress

Abstract In nature, plants experience rapid changes in light intensity and quality throughout the day. To maximize growth, they have established molecular mechanisms to optimize photosynthetic output while protecting components of the light‐dependent reaction and CO 2 fixation pathways. Plant phenotyping of mutant collections has become a powerful tool to unveil the genetic loci involved in environmental acclimation. Here, we describe the phenotyping of the transfer‐DNA (T‐DNA) insertion mutant line SALK_008491, previously known as nhd1‐1 . Growth in a fluctuating light regime caused a loss in growth rate accompanied by a spike in photosystem (PS) II damage and increased non‐photochemical quenching (NPQ). Interestingly, an independent nhd1 null allele did not recapitulate the NPQ phenotype. Through bulk sequencing of a backcrossed segregating F 2 pool, we identified an ~14‐kb large deletion on chromosome 3 (Chr3) in SALK_008491 affecting five genes upstream of NHD1 . Besides NHD1 , which encodes for a putative plastid Na + /H + antiporter, the stromal NAD‐dependent D‐3‐phosphoglycerate dehydrogenase 3 ( PGDH3 ) locus was eradicated. Although some changes in the SALK_008491 mutant's photosynthesis can be assigned to the loss of PGDH3, our follow‐up studies employing respective single mutants and complementation with overlapping transformation‐competent artificial chromosome (TAC) vectors reveal that the exacerbated fluctuating light sensitivity in SALK_008491 mutants result from the simultaneous loss of PGDH3 and NHD1. Altogether, the data obtained from this large deletion‐carrying mutant provide new and unintuitive insights into the molecular mechanisms that function to protect the photosynthetic machinery. Moreover, our study renews calls for caution when setting up reverse genetic studies using T‐DNA lines. Although second‐site insertions, indels, and SNPs have been reported before, large deletion surrounding the insertion site causes yet another problem. Nevertheless, as shown through this research, such unpredictable genetic events following T‐DNA mutagenesis can provide unintuitive insights that allow for understanding complex phenomena such as the plant acclimation to dynamic high light stress.

Lopez, Laura S.↗

Density-metric unimodular gravity: Vacuum maximal symmetry

We have investigated the vacuum maximally symmetric solutions of recently proposed density-metric unimodular gravity theory. The results are widely different from inflationary scenario. The exponential dependence on time in deSitter space is substituted by a power law. Open space-times with non-zero cosmological constant are excluded.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Euclidean gravitational action as black hole entropy, singularities, and spacetime voids

We argue why the static spherically symmetric vacuum solutions of Einstein's equations described by the textbook Hilbert metric g{sub {mu}}{sub {nu}}(r) is not diffeomorphic to the metric g{sub {mu}}{sub {nu}}(|r|) corresponding to the gravitational field of a point mass delta function source at r=0. By choosing a judicious radial function R(r)=r+2G|M|{theta}(r) involving the Heaviside step function, one has the correct boundary condition R(r=0)=0, while displacing the horizon from r=2G|M| to a location arbitrarily close to r=0 as one desires, r{sub h}{yields}0, where stringy geometry and quantum gravitational effects begin to take place. We solve the field equations due to a delta function point mass source at r=0, and show that the Euclidean gravitational action (in ({Dirac_h}/2{pi}) units) is precisely equal to the black hole entropy (in Planck area units). This result holds in any dimensions D{>=}3. In the Reissner-Nordstrom (massive charged) and Kerr-Newman black hole case (massive rotating charged) we show that the Euclidean action in a bulk domain bounded by the inner and outer horizons is the same as the black hole entropy. When one smears out the point-mass and point-charge delta function distributions by a Gaussian distribution, the area-entropy relation is modified. We postulate why these modifications should furnish the logarithmic corrections (and higher inverse powers of the area) to the entropy of these smeared black holes. To finalize, we analyze the Bars-Witten stringy black hole in 1+1 dimension and its relation to the maximal acceleration principle in phase spaces and Finsler geometries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral splitting optimization for high-efficiency solar photovoltaic and thermal power generation

Utilizing the full solar spectrum is desirable to enhance the conversion efficiency of a solar power generator. In practice, this can be achieved through spectral splitting between multiple converters in parallel. However, it is unclear which wavelength bands should be directed to each converter in order to maximize the efficiency. We developed a model of an ideal hybrid solar converter which utilizes both a single-junction photovoltaic cell and a thermal engine. We determined the limiting efficiencies of this hybrid strategy and the corresponding optimum spectral bandwidth directed to the photovoltaic cell. This optimum width is inversely proportional to the thermal engine efficiency and scales with the bandgap of the photovoltaic cell. This bandwidth was also obtained analytically through an entropy minimization scheme and matches well with our model. We show that the maximum efficiency of the system occurs when it minimizes the spectral entropy generation. This concept can be extended to capture generalized non-idealities to increase the usefulness of this technique for a range of full solar spectrum utilization technologies.

14 SOLAR ENERGY↗

Enabling Technologies for Compact Integrated Electric Drives for Automotive Traction Applications

The electric traction drive is the main consumer of the stored energy in an electric vehicle. Therefore, the drive system must perform with high efficiency to maximize the vehicle range for given battery capacity. Since the introduction of hybrid electric vehicles, various innovative traction drive technologies have been implemented in commercially available electric vehicles to increase efficiency and power density. It is expected that the power density and performance of the traction drive unit must improve significantly for future electric vehicles to increase the user space in the vehicle, extend the range and increase market adoption. US Department of Energy (DOE)has recently announced technical targets for light duty electric vehicles. DOE targets to reach a power density target of 33 kW/L for a 100 kW traction drive system by 2025. It is an increment by a factor of 5.5 in comparison to the state-of-the-art. This paper investigates the current trends in commercially available electric drives for light-duty automotive applications, identifies the challenges, and discusses innovative technologies to overcome the power density barrier.

Chowdhury, Shajjad↗

Geostationary multipurpose platforms

In addition to the advantages generally associated with orbital platforms, such as improved reliability, economies of scale, simple connectivity of elements, reduced tracking demands and the restraint of orbital object population growth, geostationary platforms yield: (1) continuous access by fixed ground antennas for communications services; (2) continuous monitoring of phenomena over chosen regions of the earth's surface; (3) a preferred location for many solar-terrestrial physics experiments. The geostationary platform also offers a low-risk and economical solution to the impending saturation of the orbital arc/frequency spectrum, maximizing the capacity of individual slots and increasing the utility of the entire arc. It also allows the use of many small, simple and inexpensive earth stations through complexity inversion and high power per beam. Block diagram and operational flowcharts are provided.

Bekey, I.↗

Decision-Theoretic Control of Planetary Rovers

Planetary rovers are small unmanned vehicles equipped with cameras and a variety of sensors used for scientific experiments. They must operate under tight constraints over such resources as operation time, power, storage capacity, and communication bandwidth. Moreover, the limited computational resources of the rover limit the complexity of on-line planning and scheduling. We describe two decision-theoretic approaches to maximize the productivity of planetary rovers: one based on adaptive planning and the other on hierarchical reinforcement learning. Both approaches map the problem into a Markov decision problem and attempt to solve a large part of the problem off-line, exploiting the structure of the plan and independence between plan components. We examine the advantages and limitations of these techniques and their scalability.

Zilberstein, Shlomo↗

Design and Analysis of Convolutional Neural Network for RF Signal Modulation Classification for In-Orbit Deployment

To effectively transmit data to and from satellites requires a complex and robust RF communication system. Commonly, several different types of signal modulations may be required to maximize satellite efficiency depending on a variety of unexpected channel impairments. We propose a neural network algorithm capable of learning these RF signal modulations using a supervised learning technique designed for low power, high-efficiency in-orbit deployment. The work presented demonstrates a convolutional neural network (CNN) capable of learning and recognizing a set of modulation schemes commonly used to transmit RF information. We are capable of recognizing the modulation scheme from the I and Q data channels directly, with no preprocessing or data conversion required other than breaking the incoming signal into a set of uniform normalized samples. We perform a network design and size analysis, showing that reasonably high accuracy can be obtained using networks with a relatively low number of trainable parameters. Given that a user of a system such as this may wish to receive a signal using a modulation scheme that the network has not previously learned, we demonstrate that transfer learning can learn new modulation schemes by retraining only the fully connected layers in the CNN. Thus, this type of network would excel in outer space deployment using high-efficiency transfer learning hardware. Modulation recognition can be performed through rapid feedforward computation, and the CNN training process is significantly simplified when learning new modulations is required.

CNN↗

TOPDAQ Acquisition Utility Beta version 1.0

This TOPDAQ Acquisition Utility uses 5 digital cameras mounted on a vertical pole, maintained in a vertical position using sensors and actuators, to take photographs of an RP-2 or RP-3 module, one camera for each row (4) and one in the center for driving, when the module is at 0 degrees, or facing the eastern horizon. These photographs and other data collected at the same time the pictures are taken are analyzed by the TOPAAP Analysis Utility. The TOPCAT implemented by the TOPDAQ Acquisition Utility and TOPAAP Analysis Utility programs optimizes the alignment of each RP in a module on a parabolic trough solar collector array (SCA) to maximize the amount of solar energy intercepted by the solar receiver. The camera fixture and related hardware are mounted on a pickup truck and driven between rows in a parabolic trough solar power plant. An ultrasonic distance meter is used to maintain the correct distance between the cameras and the RP module. Along with the two leveling actuators, a third actuator is used to maintain a proper relative vertical position between the cameras and the RP module. The TOPDAQ Acquisition Utility facilitates file management by keeping track of which RP module data is being taken and also controls the exposure levels for each camera to maintain a high contract ratio in the photograph even as the available daylight changes throughout the day. The theoretical TOPCAT hardware and software support the current industry standard RP-2 and RP-3 module geometries.

MOreno, Mario↗

Analysis of Vertical Bifacial Photovoltaic Array Performance

Agrivoltaics is a developing technology where solar panels are installed within farm fields to get a dual-use out of the same plot of land. There is still much engineering work to do to maximize the electrical output of these arrays without sacrificing too much space or impeding the growth of crops. Vertical bifacial modules have potential for this purpose, and our model examines how much power can be generated with different configurations.

14 SOLAR ENERGY↗

ERHIC Conceptual Design

The conceptual design of the high luminosity electron-ion collider, eRHIC, is presented. The goal of eRHIC is to provide collisions of electrons (and possibly positrons) with ions and protons at the center-of-mass energy range from 25 to 140 GeV, and with luminosities exceeding 10{sup 33} cm{sup -2} s{sup -1}. A considerable part of the physics program is based on polarized electrons, protons and He3 ions with high degree of polarization. In eRHIC electron beam will be accelerated in an energy recovery linac. Major R&D items for eRHIC include the development of a high intensity polarized electron source, studies of various aspects of energy recovery technology for high power beams and the development of compact magnets for recirculating passes. In eRHIC scheme the beam-beam interaction has several specific features, which have to be thoroughly studied. In order to maximize the collider luminosity, several upgrades of the existing RHIC accelerator are required. Those upgrades may include the increase of intensity as well as transverse and longitudinal cooling of ion and proton beams.

43 PARTICLE ACCELERATORS↗

Integrated Spatial, Spectral, & Temporal Optical Reflectance System for Precision Occupancy & Location Sensing to Improve Building Energy Efficiency

Buildings consume approximately 35% of the electricity used in the U.S. and building owners can significantly reduce this energy use by providing services like heating, electrical power and lighting only when people are present. The ARPAe funded program titled “INTEGRATED SPATIAL, SPECTRAL, & TEMPORAL OPTICAL REFLECTANCE SYSTEM FOR PRECISION OCCUPANCY & LOCATION SENSING TO IMPROVE BUILDING ENERGY EFFICIENCY” demonstrates how a low cost sensor technology developed for measuring distances can be used to count and locate occupants with a high degree of precision with a very low error rates. This platform tells a building control system where occupants are located (but not who they are) so that energy consuming services can be provided only when the services are needed by building occupants. The original proof of concept involved using low cost, commercially available time-of-flight (TOF) sensors that measure distance, but the performance of these existing sensors was lacking, as they could not operate properly in the presence of sunlight, which blinded the simple TOF sensors and limited their utility in buildings. This project proposed a powerful new class of TOF sensors that used state-of-the-art integrated circuit (IC) fabrication processes that combined advanced photonics with conventional silicon chip circuitry for improved sensor performance. An equally important part of this project was to find ways to maximize occupant count and location accuracy while using the fewest number of sensors possible, in order to keep costs low. By using building blueprints to create digital twins of commercial building spaces, the team developed new algorithms to maximize occupant count and tracking accuracy by properly locating the minimum number of sensors at just the right spots in the building. This capability not only minimizes system costs but also simplified sensor installation and system commissioning. Our simulations of our sensor networks for a range of commercial floorplan designs demonstrated that our installed cost target of $0.08/sqft was attainable, though not fully demonstrated during the project. Finally, we noted that the TOF sensor concept could provide a valuable role in health and eldercare by tracking patients without the need for worn sensors and would be useful for fall detection and other patient safety metrics, including tracking healthcare/patient interactions. We feel that, when fully developed, this new class of sophisticated TOF sensors and support software will be a powerful new approach to improving building energy efficiency based on occupant centric control platforms and will also open new levels of patient safety in healthcare operations. To realize this potential, the team formed the Troy Sensor Company LLC to oversee licensing of the programs patents and continue to seek commercialization of this program’s activity sensing technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Growth dynamics of copper oxide nanowires in plasma at low pressures

The growth time dynamics of the copper oxide nanowires (NWs) in radiofrequency plasma discharge were investigated. Grounded copper samples were treated in argon-oxygen plasma with the discharge power of 150 W for sequenced times up to 20 min. After the treatment, the samples were analysed with scanning electron microscopy and image processing to obtain the length and aspect ratio of the NWs. A growth mode with the saturation was observed in dependence to NW length, where the maximal length of 5 μm was achieved in 20 min. However, the best NW aspect ratio had maximum of about 40 after 10 min of plasma treatment. To describe and understand nanowire growth mechanism, a theoretical model was developed and it is in agreement with the experiment. The model results indicate that different densities of the ion current to the side and top area of NW modify the NW growth in height and width. The NW growth is enhanced by presence of ions, and thus this implies that it can be controlled by discharge power. This explains much faster growth of copper oxide nanowires in plasma environment compared to prolonged thermal treatments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation hardening design of nuclear powered spacecraft

The design and operation of space systems utilizing nuclear fueled power systems must consider the radiation environment from the earliest stages of their design. A range of nuclear systems are being considered for present and future satellite systems capable of supplying tens of kilowatts to multimegawatt and generating a corresponding range of radiation environments. The effects of these radiations on electronics and materials can be minimized by implementing early design considerations which maximize the design efficiency and minimize the impact on system mass. Space systems design considerations for the radiation environment must include all sources in addition to the self induced gamma ray and neutron radiation. These include the orbital dependent environment from the high energy electron and protons encountered in natural space. The system trades which the designer must consider in the development of space platforms which utilize nuclear reactor power supplies are discussed.

Schmidt, R. E.↗