Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOELECTRICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Effect of total pressure on the formation and size evolution of silicon quantum dots in silicon nitride films

The size of silicon quantum dots (Si QDs) embedded in silicon nitride (SiN{sub x}) has been controlled by varying the total pressure in the plasma-enhanced chemical vapor deposition (PECVD) reactor. This is evidenced by transmission electron microscopy and results in a shift in the light emission peak of the quantum dots. We show that the luminescence in our structures is attributed to the quantum confinement effect. These findings give a strong indication that the quality (density and size distribution) of Si QDs can be improved by optimizing the deposition parameters which opens a route to the fabrication of an all-Si tandem solar cell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photovoltaic-Concentrator Based Power Beaming For Space Elevator Application

The MClimber team, at the Student Space Systems Fabrication Laboratory of the University of Michigan, has developed a prototype robotic climber for competition in the NASA sponsored Power Beaming Challenge. This paper describes the development of the system that utilizes a simple telescope to deliver an 8 kW beam to a photovoltaic panel in order to power a one kilometer climb. Its unique approach utilizes a precision GPS signal to track the panel. Fundamental systems of the project were implemented using a design strategy focusing on robustness and modularity. Development of this design and its results are presented.

42 ENGINEERING↗

Comment on 'Energy transfer in nanowire solar cells with photon-harvesting shells' [J. Appl. Phys. 105, 124509 (2009)]

In a recent article, Peters et al. [J. Appl. Phys. 105, 124509 (2009)] claim to have observed photosensitization of crystalline silicon by energy transfer from an optically absorbing thin polymer film. We show that this claim is not justified. Their experimental design is not adequate to establish enhanced photoexcitation of silicon; moreover, the theoretical arguments in their interpretation do not stand up to scrutiny.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between charge transfer exciton recombination and photocurrent in polymer/fullerene solar cells

We correlate carrier recombination via charge transfer excitons (CTEs) with the short circuit current, J{sub sc}, in polymer/fullerene solar cells. Near infrared photoluminescence spectroscopy of CTE in three blends differing for the fullerene acceptor, gives unique insights into solar cell characteristics. The energetic position of the CTE is directly correlated with the open-circuit voltage, V{sub oc}, and more important J{sub sc} decreases with increasing CTE emission intensity. CTE emission intensity is discussed from the perspective of blend morphology. The work points out the fundamental role of CTE recombination and how optical spectroscopy can be used to derive information on solar cell performances.

36 MATERIALS SCIENCE↗

Growth of Cu{sub 2}O on Ga-doped ZnO and their interface energy alignment for thin film solar cells

Cu{sub 2}O thin films are deposited by direct current reactive magnetron sputtering on borofloat glass and indium tin oxide (ITO) coated glass at room temperature. The effect of oxygen partial pressure on the structures and properties of Cu{sub 2}O thin films are investigated. We show that oxygen partial pressure is a crucial parameter in achieving pure phases of CuO and Cu{sub 2}O. Based on this finding, we fabricate heterojunctions of p-type Cu{sub 2}O with n-type gallium doped ZnO (GZO) on ITO coated glass substrates by pulsed laser deposition for GZO thin films. The energy band alignment for thin films of Cu{sub 2}O/GZO on ITO glass is characterized using high-resolution x-ray photoelectron spectroscopy. The energy band alignment for the Cu{sub 2}O/GZO heterojunctions is determined to be type II with a valence band offset of 2.82 eV and shows negligible effects of variation with gallium doping. The higher conduction band of the Cu{sub 2}O relative to that of GZO in the obtained band alignment shows that the heterojunctions are suitable for solar cell application based on energy levels consideration.

36 MATERIALS SCIENCE↗

Comparative Studies on Temperature Dependent I-V Characteristics of Al/(p)CdTe and Ni/(n)CdS Schottky Junctions and Their PV Effect

Temperature dependent I-V characteristics of vacuum evaporated Al/(p)CdTe and Ni/(n)CdS Schottky junctions and their photovoltaic effects have been studied and compared. Different junction parameters such as ideality factors, barrier heights, Richardson's constant, short-circuit current density, fill factor, PV efficiency etc. were determined from their I-V characteristics. These parameters were found to change significantly on variation of temperature. The structures showed the change of PV effect. Efficiency found were 2.84% for Al/(p)CdTe and 4.44% for Ni hydro/(n)CdS. Polycrystalline nature, and continuous and ordered structure with bigger grain sizes of the CdS film shows more PV conversion efficiency in making Ni/(n)CdS junction as compare to Al/(p)CdTe junction. However these values were found to vary with doping concentration, and in hydrogen treated samples in both cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and Electrical Properties of Al/(p)Bi{sub 2}S{sub 3} Schottky Junction

Thin film Al/(p)Bi{sub 2}S{sub 3} Schottky junctions were prepared by vacuum evaporation under pressure 10{sup -6} Torr. The p-type Bi{sub 2}S{sub 3} thin films with acceptor concentration (3.36-7.33)x10{sup 16}/cm{sup 3} were obtained by evaporating 'In' along with Bi{sub 2}S{sub 3} powder and then annealing the films at 453K for 5 hours. Different junction-parameters such as ideality factor, barrier height, effective Richardson's constant, short-circuit current, etc. were determined from I-V characteristics. The junctions exhibited rectifying I-V characteristics and also photovoltaic effect. Ideality factor was found to decrease with the increase of temperature. Proper doping, annealing, and hydrogenation are necessary to reduce the series resistance so as to achieve high carrier efficiency. More works are being carried out in this direction.

36 MATERIALS SCIENCE↗

Electrical Characteristics and Interface Properties of III Nitride-Based Metal-Insulator-Semiconductor Structure

In this work, III-Nitride based metal-insulator-semiconductor (MIS) structure has been studied using AlN/GaN heterostructures on Si (111) with AlN buffer layer grown by plasma-assisted molecular beam epitaxy (MBE). The structural and electrical characteristics of the films were studied through high resolution x-ray diffraction (HRXRD), capacitance-voltage (C-V) and current-voltage (I-V) measurements. The value of flat-band voltage was -0.7 V. A total fixed oxide charge density of 2.73x10{sup 11} cm{sup -2} was estimated. Terman's method was used to obtain the density of interface state in the MIS structure. The analysis showed low interface state density values of 3.66x10{sup 11} cm{sup -2} eV{sup -1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiple growths of epitaxial lift-off solar cells from a single InP substrate

We demonstrate multiple growths of flexible, thin-film indium tin oxide-InP Schottky-barrier solar cells on a single InP wafer via epitaxial lift-off (ELO). Layers that protect the InP parent wafer surface during the ELO process are subsequently removed by selective wet-chemical etching, with the active solar cell layers transferred to a thin, flexible plastic host substrate by cold welding at room temperature. The first- and second-growth solar cells exhibit no performance degradation under simulated Atmospheric Mass 1.5 Global (AM 1.5G) illumination, and have a power conversion efficiency of {eta}{sub p}=14.4{+-}0.4% and {eta}{sub p}=14.8{+-}0.2%, respectively. The current-voltage characteristics for the solar cells and atomic force microscope images of the substrate indicate that the parent wafer is undamaged, and is suitable for reuse after ELO and the protection-layer removal processes. X-ray photoelectron spectroscopy, reflection high-energy electron diffraction observation, and three-dimensional surface profiling show a surface that is comparable or improved to the original epiready wafer following ELO. Wafer reuse over multiple cycles suggests that high-efficiency; single-crystal thin-film solar cells may provide a practical path to low-cost solar-to-electrical energy conversion.

36 MATERIALS SCIENCE↗

Comparison of majority carrier charge transfer velocities at Si/polymer and Si/metal photovoltaic heterojunctions

Two sets of silicon (Si) heterojunctions with either Au or PEDOT:PSS contacts have been prepared to compare interfacial majority carrier charge transfer processes at Si/metal and Si/polymer heterojunctions. Current-voltage (J-V) responses at a range of temperatures, wavelength-dependent internal quantum yields, and steady-state J-V responses under illumination for these devices are reported. The cumulative data suggest that the velocity of majority carrier charge transfer, v{sub n}, is several orders of magnitude smaller at n-Si/PEDOT:PSS contacts than at n-Si/Au junctions, resulting in superior photoresponse characteristics for these inorganic/organic heterojunctions.

36 MATERIALS SCIENCE↗

Geometries, Electronic Structures, And Spectral Properties Of Some Metal Free Phthalonitrile Derivatives For Enhancement Of The Dye Sensitized Solar Cells

New technologies for direct solar energy conversion have gained more attention in the last few years. In particular, Dye Sensitized Solar Cells (DSSCs) are promising in terms of efficiency and low cost [1,2]. Benefited from systematic device engineering and continuous material innovation, a state of the art DSC with a ruthenium sensitizer has achieved a validated efficiency of 11.1%[3] measured under the air mass 1.5 global (AM1.5G) conditions.The optimized geometries of the 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are shown in Fig. 1(a). The frontier molecular orbitals (MO) energies of the dyes 3, 4 Pyridinedicarbonitrile, 3-Nitrophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are shown in Fig. 1(b). The HOMO-LUMO gap of the dye 3, 4 Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile in vacuum is 5.96 eV, 5.54 eV, 5.57 eV, 5.76 eV respectively. The geometries, electronic structures, polarizabilities, and hyperpolarizabilities of dyes 3, 4-Pyridinedicarbonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile were studied by using density functional theory with hybrid functional B3LYP, and the UV-Vis spectra were investigated by using TDDFT methods. The NBO results suggest that 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile 4-Aminophthalonitrile and 4-Methylphthalonitrile are all (D-pi-A) systems. The calculated isotropic polarizability of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is. 85.76, 112.72, 26.63 and 115.13 a.u., respectively. The calculated polarizability anisotropy invariant of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is 74.451, 83.533, 62.653 and 88.526 a.u., respectively. The hyperpolarizabilities of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is 0.80628, 5.60646, 7.7979 and 1.86216 (in a.u.), respectively. The frequencies of strongest IR absorption for 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are 1614 cm{sup -1}, 290 cm{sup -1}, 387 cm{sup -1} and 846 cm{sup -1} and the frequencies of strongest Raman activity for 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are 2345 cm{sup -1}, 2338 cm{sup -1},2329 cm{sup -1}, 2337cm{sup -1}, respectively. The electronic absorption spectral features in visible and near-UV region were assigned based on the qualitative agreement to TDDFT calculations. The absorptions are all ascribed to {pi}{yields}{pi}* transition. The three excited states with the lowest excited energies of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are photoinduced electron transfer processes that contributes sensitization of photo-to-current conversion processes. The interfacial electron transfer between semiconductor TiO{sub 2} electrode and dye sensitizer 3, 4- Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is electron injection process from excited dyes as donor to the semiconductor conduction band. Based on the comparative analysis of geometries, electronic structures, and spectrum properties between 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile the role of amide and methyl groups in phthalonitrile is as follows: it enlarged the distance between electron donor group and semiconductor surface, and decreased the timescale of the electron injection rate, resulted in giving lower conversion efficiency. This indicates that the choice of the appropriate conjugate bridge in dye sensitizer is very important to enhance the performance of DSSC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low gap amorphous GaN{sub 1-x}As{sub x} alloys grown on glass substrate

Amorphous GaN{sub 1-x}As{sub x} layers with As content in the range of x=0.1 to 0.6 were grown by molecular beam epitaxy on Pyrex glass substrate. These alloys exhibit a wide range of band gap values from 2.2 to 1.3 eV. We found that the density of the amorphous films is {approx}0.8-0.85 of their corresponding crystalline value. These amorphous films have smooth morphology, homogeneous composition, and sharp well defined optical absorption edges. The measured band gap values for the crystalline and amorphous GaN{sub 1-x}As{sub x} alloys are in excellent agreement with the predictions of the band anticrossing model. The high absorption coefficient of {approx}10{sup 5} cm{sup -1} for the amorphous GaN{sub 1-x}As{sub x} films suggests that relatively thin films (on the order of 1 {mu}m) are necessary for photovoltaic application.

36 MATERIALS SCIENCE↗

Optical, structural, and chemical properties of flash evaporated In{sub 2}S{sub 3} buffer layer for Cu(In,Ga)Se{sub 2} solar cells

In{sub 2}S{sub 3} layers were deposited by flash evaporation technique with varying flash rates. The optical constants of layers based on Tauc-Lorentz model dielectric function were extracted from spectroscopic ellipsometry measurements. X-ray photoelectron spectroscopic investigation revealed the presence of oxygen impurity in as-deposited and air-annealed layers with traces of Na inclusion in the layer grown at high flash rate. The enhancement in crystalline arrangement of as-deposited layer after air annealing was confirmed by Raman spectroscopy. Rutherford backscattering measurements revealed the growth of off-stoichiometric layers at all flash rates. An analytical layer growth model has been proposed supporting the results obtained by various layer characterization techniques. The solar cells were prepared with flash evaporated In{sub 2}S{sub 3} buffer layers and their performances were compared with CdS reference solar cell. A significant gain in short-circuit current was obtained after air annealing of the complete device at 200 deg. C for 20 min. A maximum conversion efficiency of 12.6% was delivered by a high flash rate In{sub 2}S{sub 3} buffered cell with open-circuit voltage close to that of CdS reference cell. The improvement in device performance after air annealing treatment is explained by thermally enhanced Cu and oxygen diffusion from Cu(In,Ga)Se{sub 2} and i-ZnO to In{sub 2}S{sub 3} layer, respectively.

36 MATERIALS SCIENCE↗

X-ray detectors based on GaN Schottky diodes

GaN Schottky diodes have been fabricated and tested as x-ray detectors in the range from 6 to 21 keV. The spectral response has been measured and is compared to its theoretical value. The study of the response and its temporal dynamics as a function of the bias allows to identify a photovoltaic behavior at low bias and a photoconductive one at larger reverse biases. The GaN diode turned out to be linear as a function of the incident power. The noise and detectivity are given and discussed.

36 MATERIALS SCIENCE↗

Nanoplasmonics: New Design Concepts For Nanoscale Optical Cavities

The design of nanoplasmonic cavities exploiting coherent processes such as sub- and superradiance as well as Fano-type interactions will be discussed, under the framework of plasmon hybridization theory. In such cavities, interactions between bright and dark localized plasmon modes lead to a complex mode spectrum, which can be visualized using electron energy loss spectroscopy. First implementations fabricated using electron beam lithography will be presented. Furthermore, it will be shown how the concept of transformation optics can be utilized for the design of nanoresonators with a broadband absorption spectrum, showing high promise for light harvesting over the whole visible and infrared range of the spectrum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser Applications for Nanotechnology : Insights From Numerical Modeling

Laser-produced nanoparticles have found many applications in bio-photonics, medicine and in the development of photovolvatic cells. Many experiments have been performed demonstrating the formation of these particles from solid targets in vacuum, in the presence of a gas or a liquid. However, it is still difficult to predict the size distribution of these particles. Therefore, we have performed an extensive numerical modeling of the involved physical processes. The developed models allow us to compare the relative contribution of several processes involved in the cluster production by laser ablation: (i) direct cluster ejection from a target under rapid laser interaction, (ii) condensation/evaporation; (iii) fragmentation/aggregation processes during cluster diffusion; and (iv) diffusion and coalescence if nanoparticles are deposited on a substrate. The calculation results of both hydrodynamic and molecular dynamics simulations demonstrate that an exposure of a target to a short or ultra-short laser pulse leads to an explosive target decomposition and to the ejection of nanoparticles. These cluster precursors are formed during rapid target expansion through both thermal and mechanical processes. Collisions with background species affect the cluster size distribution. The influences of the parameters, such as initial cluster temperature and size, background temperature and density, on the cluster evolution are analyzed. Laser-induced phase explosion process affects the formation of small surface structures, obtained with small number of shots. However, the non-resonant 'conical' surface structures with the mean size as large as several micrometers are formed due to the presence of harder less absorbing centers. These obtained results can be used to explain many recent experimental observations.

36 MATERIALS SCIENCE↗

Study On Laser-Induced Periodic Structures And Photovoltaic Application

We have irradiated silicon with a series of femtosecond laser pulses to improve light absorption at the silicon surface. The laser treated surface namely black silicon shows excellent optical properties on mono and multicrystalline silicon wafers with a reflectivity reduction down to 3%, without crystal orientation dependence. After the laser process, the front side of samples has been boron-implanted by Plasma Immersion Ion Implantation to create the 3D p{sup +} junction. Improved electrical performances have also been demonstrated with a 57% increase in the photocurrent, compared to non-texturized surface.

36 MATERIALS SCIENCE↗