Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optimization algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Robust on-off pulse control of flexible space vehicles

The on-off reaction jet control system is often used for attitude and orbital maneuvering of various spacecraft. Future space vehicles such as the orbital transfer vehicles, orbital maneuvering vehicles, and space station will extensively use reaction jets for orbital maneuvering and attitude stabilization. The proposed robust fuel- and time-optimal control algorithm is used for a three-mass spacing model of flexible spacecraft. A fuel-efficient on-off control logic is developed for robust rest-to-rest maneuver of a flexible vehicle with minimum excitation of structural modes. The first part of this report is concerned with the problem of selecting a proper pair of jets for practical trade-offs among the maneuvering time, fuel consumption, structural mode excitation, and performance robustness. A time-optimal control problem subject to parameter robustness constraints is formulated and solved. The second part of this report deals with obtaining parameter insensitive fuel- and time- optimal control inputs by solving a constrained optimization problem subject to robustness constraints. It is shown that sensitivity to modeling errors can be significantly reduced by the proposed, robustified open-loop control approach. The final part of this report deals with sliding mode control design for uncertain flexible structures. The benchmark problem of a flexible structure is used as an example for the feedback sliding mode controller design with bounded control inputs and robustness to parameter variations is investigated.

Wie, Bong↗
DOE OSTI2024

Studying Transient Phenomena in Thin Films with Reinforcement Learning

Neutron reflectometry has long been a powerful tool to study the interfacial properties of energy materials. Recently, time-resolved neutron reflectometry has been used to better understand transient phenomena in electrochemical systems. Those measurements often comprise a large number of reflectivity curves acquired over a narrow q range, with each individual curve having lower information content compared to a typical steady-state measurement. In this work, we present an approach that leverages existing reinforcement learning tools to model time-resolved data to extract the time evolution of structure parameters. Further, by mapping the reflectivity curves taken at different times as individual states, we use the Soft Actor-Critic algorithm to optimize the time series of structure parameters that best represent the evolution of an electrochemical system. We show that this approach constitutes an elegant solution to the modeling of time-resolved neutron reflectometry data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Optimization by decomposition

An algorithm is presented for solving the structural optimization problem as a set of smaller subproblems that correspond to levels of nested substructures. In all three of the algorithm variants presented, the matching was assisted by means of the behavior and optimum sensitivity derivatives. The algorithm is noted to be intrinsically germane to distributed computing, since the subproblems can be concurrently addressed; the algorithm can also be generalized to those multidisciplinary systems whose subsystems can be arranged into a hierarchy of substructure-like dependencies.

Sobieszczanski-Sobieski, Jaroslaw↗
NASA NTRS2004

Applying Squeaky-Wheel Optimization Schedule Airborne Astronomy Observations

We apply the Squeaky Wheel Optimization (SWO) algorithm to the problem of scheduling astronomy observations for the Stratospheric Observatory for Infrared Astronomy, an airborne observatory. The problem contains complex constraints relating the feasibility of an astronomical observation to the position and time at which the observation begins, telescope elevation limits, special use airspace, and available fuel. Solving the problem requires making discrete choices (e.g. selection and sequencing of observations) and continuous ones (e.g. takeoff time and setting up observations by repositioning the aircraft). The problem also includes optimization criteria such as maximizing observing time while simultaneously minimizing total flight time. Previous approaches to the problem fail to scale when accounting for all constraints. We describe how to customize SWO to solve this problem, and show that it finds better flight plans, often with less computation time, than previous approaches.

Frank, Jeremy↗
NASA NTRS1992

Using adaptive grid in modeling rocket nozzle flow

The mechanical behavior of a rocket motor internal flow field results in a system of nonlinear partial differential equations which cannot be solved analytically. However, this system of equations called the Navier-Stokes equations can be solved numerically. The accuracy and the convergence of the solution of the system of equations will depend largely on how precisely the sharp gradients in the domain of interest can be resolved. With the advances in computer technology, more sophisticated algorithms are available to improve the accuracy and convergence of the solutions. An adaptive grid generation is one of the schemes which can be incorporated into the algorithm to enhance the capability of numerical modeling. It is equivalent to putting intelligence into the algorithm to optimize the use of computer memory. With this scheme, the finite difference domain of the flow field called the grid does neither have to be very fine nor strategically placed at the location of sharp gradients. The grid is self adapting as the solution evolves. This scheme significantly improves the methodology of solving flow problems in rocket nozzles by taking the refinement part of grid generation out of the hands of computational fluid dynamics (CFD) specialists and place it into the computer algorithm itself.

Chow, Alan S.↗
NASA NTRS1986

Optimal take-off trajectories in the presence of windshear

The present consideration of takeoff trajectory optimization in eight different fundamental problems involving wind shears assumes that the power setting is held at the maximum value, and that the aircraft is controlled with respect to angle-of-attack. While the first three problems are least-squares ones of the Bolza type, the remaining five are minimax problems of the Chebyshev type which can be converted to Bolza type by means of suitable transformations. All problems are solved on the basis of the dual sequential gradient-restoration algorithm for optimal control problems. The trajectory solutions obtained are superior to constant angle-of-attack trajectories.

Miele, A.↗
NASA NTRS2017

Computationally Efficient Motion Planning Algorithms for Agile Autonomous Vehicles in Cluttered Environments

Fast, real-time motion planning of an agile, autonomous vehicle in a cluttered environment, with many geometrically-fixed obstacles, is a very complex problem, especially because of the vehicle dynamics constraints and resource constrained computational capabilities onboard the vehicle. In this paper, we present computationally-efficient versions of our novel motion planning algorithm called the Spherical Expansion and Sequential Convex Programming (SE–SCP) algorithm. The SE–SCP algorithm first uses a spherical-expansion-based randomized sampling algorithm to explore the workspace. Oncea path is found from the start position to the goal position, the algorithm computes a locally optimal trajectory, within its homotopy class for a desired cost function, by solving a sequence of convex optimization problems. Thus, the SE–SCP algorithm is anytime locally optimal and the trajectory is globally optimal if the number of samples tends to infinity. In this paper, we further enhance the computational efficiency of the SE–SCP algorithm using uni-directional and bi-directional rewiring techniques. We also present a detailed proof of the local optimality characteristics of the new SE–SCP algorithms for aspecial case of vehicle dynamics. Simulation examples involving quadrotor and spacecraft help demonstrate the effectiveness of our new algorithms.

Bandyopadhyay, Saptarshi↗
DOE OSTI2022

Enabling DER Participation in Frequency Regulation Markets

Distributed energy resources (DERs) are playing an increasing role in ancillary services for the bulk grid, particularly in frequency regulation. In this article, we propose a framework for collections of DERs, combined to form microgrids and controlled by aggregators, to participate in frequency regulation markets. Our approach covers both the identification of bids for the market clearing stage and the mechanisms for the real-time allocation of the regulation signal. The proposed framework is hierarchical, consisting of a top layer and a bottom layer. The top layer consists of the aggregators communicating in a distributed fashion to optimally disaggregate the regulation signal requested by the system operator. The bottom layer consists of the DERs inside each microgrid whose power levels are adjusted so that the tie line power matches the output of the corresponding aggregator in the top layer. The coordination at the top layer requires the knowledge of cost functions, ramp rates, and capacity bounds of the aggregators. We develop meaningful abstractions for these quantities respecting the power flow constraints and taking into account the load uncertainties and propose a provably correct distributed algorithm for optimal disaggregation of regulation signals among the microgrids.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

"Traffic Control via Connected and Automated Vehicles: An Open-Road Field Experiment with 100 CAVs"

The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. These "phantom jams" or "stop-and-go waves,"are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experiment leveraged a heterogeneous fleet of 100 longitudinally-controlled vehicles as Lagrangian traffic actuators, each of which ran a controller with the architecture described in this paper. The MegaController is a hierarchical control architecture, which consists of two main layers. The upper layer is called Speed Planner, and is a centralized optimal control algorithm. It assigns speed targets to the vehicles, conveyed through the LTE cellular network. The lower layer is a control layer, running on each vehicle. It performs local actuation by overriding the stock adaptive cruise controller, using the stock on-board sensors. The Speed Planner ingests live data feeds provided by third parties, as well as data from our own control vehicles, and uses both to perform the speed assignment. The architecture of the speed planner allows for modular use of standard control techniques, such as optimal control, model predictive control, kernel methods and others, including Deep RL, model predictive control and explicit controllers. Depending on the vehicle architecture, all onboard sensing data can be accessed by the local controllers, or only some. Control inputs vary across different automakers, with inputs ranging from torque or acceleration requests for some cars, and electronic selection of ACC set points in others. The proposed architecture allows for the combination of all possible settings proposed above. Most configurations were tested throughout the ramp up to the MegaVandertest.

Lee, Jonathan↗
NASA NTRS2019

Optimization of a Remote Sensing Energy Balance Method over Different Canopy Applied at Global Scale

Parameterization methods which calculate turbulent heat and water fluxes with thermal remote sensing data were evaluated in the revised remote sensing surface energy balance system (SEBS) model (Chen et al., 2013). The model calculates sensible heat (H) based on the Monin-Obukhov similarity theory (MOST) and determines latent heat (LE) as the residual of energy balance. We examined the uncertainties of H and LE in the SEBS model due to five key parameters at the local station point scale. Observations at 27 flux towers located in seven land cover types (needle-leaf forest, broad leaf forest, shrub, savanna, grassland, cropland, and sparsely vegetated land) and an artificial intelligence particle swarm optimization (PSO) algorithm was combined to calibrate the five parameters (leaf drag coefficient, leaf heat transfer coefficients, roughness length for soil, and two parameters for ground heat calculation) in the SEBS model. The root-mean-square error at the site scale was reduced by 9 W/sq.m for H, and 92 W/sq.m for LE, and their correlation coefficients were increased by 0.07 (H) and 0.11 (LE) after using the calibrated parameters. The updated model validation was further conducted globally for the remotely sensed evapotranspiration (ET) calculations. Overestimation of SEBS global ET was significantly improved by using the optimized values of the parameters. The results suggested PSO was able to consistently locate the global optimum of the SEBS model, and appears to be capable of solving the ET model optimization problem.

Chen, Xuelong↗
NASA NTRSDate not supplied

A NASA Perspective on Quantum AI, Error Correction, and Beyond

Quantum computing is one of the most enticing computational paradigms with the potential to revolutionize diverse areas of future-generation computational systems. While quantum computing hardware has advanced rapidly, from tiny laboratory experiments to quantum chips that can outperform even the largest supercomputers on specialized computational tasks, these noisy-intermediate scale quantum (NISQ) processors are still too small and non-robust to be directly useful for any real-world applications. We discuss the prospects for quantum computing and AI, highlighting advances in algorithms, both near- and longer-term. Quantum error correction is critical to the realization of any such vision. The talk with touch on some recent exciting advanced in quantum error correction, particularly in dynamical codes. The talk will conclude with an example of how the combination of quantum computing and artificial intelligence can help probe fundamental aspect of quantum physics.

quantum optimization algorithms and sampling↗
NASA NTRS1984

On-line determination of optimal flight paths for helicopters

A procedure for computing fuel optimal fixed range trajectories is developed for helicopters. The algorithm uses a simplified dynamic model and a climb-cruise-descent assumption which simplifies the variational problem to an algebraic minimization. Development of the performance model is discussed extensively and representative results for the S-61 and S-76 helicopters are presented. The results show that the model and optimization algorithm are small enough and simple enough to be incorporated into an on-line optimization algorithm.

Slater, G. L.↗
DOE OSTI2024

Deriving cloud droplet number concentration from surface-based remote sensors with an emphasis on lidar measurements

Abstract. Given the importance of constraining cloud droplet number concentrations (Nd) in low-level clouds, we explore two methods for retrieving Nd from surface-based remote sensing that emphasize the information content in lidar measurements. Because Nd is the zeroth moment of the droplet size distribution (DSD), and all remote sensing approaches respond to DSD moments that are at least 2 orders of magnitude greater than the zeroth moment, deriving Nd from remote sensing measurements has significant uncertainty. At minimum, such algorithms require the extrapolation of information from two other measurements that respond to different moments of the DSD. Lidar, for instance, is sensitive to the second moment (cross-sectional area) of the DSD, while other measures from microwave sensors respond to higher-order moments. We develop methods using a simple lidar forward model that demonstrates that the depth to the maximum in lidar-attenuated backscatter (Rmax⁡) is strongly sensitive to Nd when some measure of the liquid water content vertical profile is given or assumed. Knowledge of Rmax⁡ to within 5 m can constrain Nd to within several tens of percent. However, operational lidar networks provide vertical resolutions of > 15 m, making a direct calculation of Nd from Rmax⁡ very uncertain. Therefore, we develop a Bayesian optimal estimation algorithm that brings additional information to the inversion such as lidar-derived extinction and radar reflectivity near the cloud top. This statistical approach provides reasonable characterizations of Nd and effective radius (re) to within approximately a factor of 2 and 30 %, respectively. By comparing surface-derived cloud properties with MODIS satellite and aircraft data collected during the MARCUS and CAPRICORN II campaigns, we demonstrate the utility of the methodology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Optimizing Multi-Robot Placements for Wire Arc Additive Manufacturing

Wire arc additive manufacturing is a metal additive manufacturing process in which the material is deposited using arc welding technology. It is gaining popularity due to high material deposition rates and faster build time. It is en-abled using robotic manipulators and can build relatively large-scale parts faster when compared with other metal additive manufacturing processes. However, the size of the large-scale parts is limited by the size of the industrial manipulator being used for the process. This limitation is overcome by using a fixed configuration multi-robot cell in which manipulators work cooperatively to build large-scale parts quickly. A fixed multi-robot cell with closely spaced industrial manipulators has high flexibility, but it restricts the part size that can be built. If the manipulators are spread out, the cell loses its flexibility but can build relatively larger parts. This issue can be avoided by using larger size manipulators, which are expensive, or by moving the modest size manipulators based on the part geometries. This paper presents a novel algorithm to generate multi-robot placements for different part geometries to be built using wire arc additive manufacturing. Furthermore, the algorithm hierarchically optimizes the build time and the inverse kinematics consistency in robot paths to improve the process efficiency and part quality. We compare the results with fixed multi-robot cells and provide insights to users to make an informed decision on whether to use a fixed or a flexible multi-robot cell for wire arc additive manufacturing.

Bhatt, Prahar↗
DOE OSTI2020

Applying Constrained Bayesian Optimization to the Design of Critical Experiments

Often when planning a criticality experiment, many design configurations are iteratively investigated with a Monte Carlo transport code. The goal is that the experiment will be optimal with respect to some variable, like the fraction of fissions occurring at a certain energy range, while simultaneously being critical. Unfortunately, the Monte Carlo transport simulations are expensive, which can ultimately limit the number of configurations that can be explored. In this work, we present how Gaussian processes (GPs) can be used as a reduced-order model in a constrained Bayesian optimization (CBO) algorithm to design a criticality experiment. The GPs replace the Monte Carlo transport simulations that explore the design space. The CBO algorithm efficiently identifies new points in the design space to run the Monte Carlo transport code while respecting the criticality constraint. It does so in a manner that both improves the accuracy of the GP and finds the approximate global optimum. We demonstrate the performance of CBO with the design of a Thermal Epithermal eXperiment (TEX) for the criticality safety validation of nuclear waste models of the Hanford Tank Farm.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

On-Sensor Data Filtering using Neuromorphic Computing for High Energy Physics Experiments

This work describes the investigation of neuromorphic computing-based spiking neural network (SNN) models used to filter data from sensor electronics in high energy physics experiments conducted at the High Luminosity Large Hadron Collider. We present our approach for developing a compact neuromorphic model that filters out the sensor data based on the particle's transverse momentum with the goal of reducing the amount of data being sent to the downstream electronics. The incoming charge waveforms are converted to streams of binary-valued events, which are then processed by the SNN. We present our insights on the various system design choices - from data encoding to optimal hyperparameters of the training algorithm - for an accurate and compact SNN optimized for hardware deployment. Our results show that an SNN trained with an evolutionary algorithm and an optimized set of hyperparameters obtains a signal efficiency of about 91% with nearly half as many parameters as a deep neural network.

R. Kulkarni, Shruti↗
NASA NTRS1975

Time domain desensitized specific optimal system design

A digital computer algorithm for desensitized specific optimal system design for general time-invariant nonlinear systems is presented. The algorithm utilizes a technique of partitioning and uncoupling of the original specific closed-loop system state and sensitivity equations into linear, nonlinear, and control subsystems. Results of the application of the algorithm in the design of a Saturn V Launch Vehicle analog attitude control system and an LST image motion compensation digital controller are given.

Henson, T. F.↗
DOE OSTI2019

Synchronous and asynchronous optimized Schwarz methods for one-way subdivision of bounded domains

Convergence of both synchronous and asynchronous optimized Schwarz algorithms for the shifted Laplacian operator on a bounded rectangular domain, in a one-way subdivision of the computational domain, with overlap, is shown. Convergence results are obtained under very mild conditions on the size of the subdomains and on the amount of overlap. A couple of results are also given, relating the convergence rate of the asynchronous method to changes in the size of the domain. Numerical experiments illustrate the theoretical results.

97 MATHEMATICS AND COMPUTING↗