Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Operational forecasting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Molecular thermodynamics for scaling prediction: Case of membrane distillation

Membrane distillation (MD) for water treatment is significantly impaired by the scaling of dissolved minerals. The type and content of minerals generally measured as total dissolved solids (TDS) in hypersaline brines not only reduce the MD flux but also control the scaling behavior on the membrane surface. The scaling-induced pore blockage further reduces water flux and eventually leads to membrane wetting. The scaling problem is even more pronounced in the treatment of produced water (PW) as it contains 3–7 times higher TDS concentrations, compared to seawater. Theoretically, the necessary conditions for a salt to precipitate can be traced from its solubility product constant and activity of the constituents within the solution. Therefore, a comprehensive thermodynamic model is necessary to represent the electrolyte behavior and to predict the precipitation of different salts in a complex solution like PW. We pursued electrolyte Nonrandom Two Liquid Theory (eNRTL), a state-of-the-art electrolyte model, to address the PW fluid phase equilibria. With a fully parameterized eNRTL model, we predicted salt precipitations in two different PW samples and compared the results against the experimental findings. Furthermore, here we forecast the precipitation of salts in response to the change in PW concentration and temperature in the MD operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Regime-specific Cloud Vertical Overlap Characteristics from Radar and Lidar Observations at the ARM sites

Climate and numerical weather prediction models require assumptions to represent the vertical distribution of subgrid-scale clouds, which have radiative transfer implications. In this study, nearly 25 years of ground-based radar and lidar observations of vertical cloud profiles at the Atmospheric Radiation Measurement Program (ARM) Southern Great Plains (SGP) site are utilized to derive cloud vertical overlap characteristics from the Cloud Type (CLDTYPE) data product. Here, the cloud vertical overlap characteristics are further separated by cloud regime by considering seven cloud types (i.e., low cloud, congestus, deep convection, altocumulus, altostratus, cirrostratus, and cirrus) as well as periods of shallow cumulus. The decorrelation length scale (i.e., exponential transition from maximum to random overlap with layer separation) is found to vary by cloud regime, ranging between 0.04 km for cirrostratus paired with cirrus to 4.58 km for low cloud paired with cirrus at SGP. Cloud vertical overlap characteristics are also considered for other ARM sites including the Tropical Western Pacific (TWP), North Slope of Alaska (NSA), and Eastern North Atlantic (ENA) sites amongst other shorter term ARM deployments globally. The decorrelation length scale ranged globally from 1.03 km in the Arctic Ocean to 3.06 km in Manacapuru, Brazil. Globally, the decorrelation length scale by cloud regime exhibited similarities (e.g., for cirrus paired with cirrus) and differences (e.g., congestus paired with cirrus). The results could help inform development of cloud vertical overlap assumptions within operational numerical weather prediction models and potentially improve prediction of radiative fluxes for weather, climate, and renewable energy forecasting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Hybrid-RL-MPC4CLR (Hybird-Reinforcement-Learning-Model-Predictive-Control-for-Reserve-Policy-Assisted-Critical-Load-Restoration-in-Distribution-Grids)

Hybrid-RL-MPC4CLR was developed as a hybrid controller for active distribution grid critical load restoration, combining deep reinforcement learning (RL) and model predictive control (MPC) aiming at maximizing total restored load following an extreme event. The RL determines a policy for quantifying operating reserve requirements, thereby hedging against uncertainty, while the MPC models grid operations incorporating the RL policy actions (i.e., reserve requirements), renewable (wind and solar) power predictions, and load demand forecasts. The developers formulated the reserve requirement determination problem as a sequential decision-making problem based on the Markov Decision Process (MDP) and design an RL learning environment based on the OpenAI Gym framework and MPC simulation. The RL agent reward and MPC objective function aim to maximize and monotonically increase total restored load and minimize load shedding and renewable power curtailment. The software is developed using various software packages in Python. The MPC's optimal power flow (OPF) model is implemented using the Pyomo package, the RL simulation environment is implemented using the MPC simulation with various scenarios of renewable energy and load demand profiles and power outage beginning times, based on the OpenAI Gym framework. The RL agent training is performed using the RLlib Ray package. The RL algorithm is trained offline using historical forecasts of renewable generation and load demand profiles. Simulation analysis and performance tests are conducted using a modified IEEE 13-bus distribution test feeder containing wind turbine, photovoltaic, microturbine, and battery.

Eseye, Abinet Tesfaye↗
DOE OSTI2024

LYNM PE1 Shot A Meteorology Team Technical Report

Weather support for Shot A was done by NOAA’s Air Resources Laboratory (ARL) / Special Operations and Research Division (SORD) and Lawrence Livermore National Laboratory (LLNL). Weather support activities included wind and precipitation forecasting, maintaining and monitoring PE1 meteorology towers MT02-11, maintaining and monitoring the ARL/SORD tower on Aqueduct Mesa (A12AI, also called MT01), maintaining and monitoring the Blackbrush energy flux tower, radiosonde preparation and launch, providing weather conditions on shot day for go/no-go criteria, and quality control and submission of the datasets. ARL/SORD additionally maintains and monitors the meteorological tower network (Mesonet) and sodar (at Desert Rock) for NNSS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

ARM Radiosondes for SNPP/JPSS Validation Field Campaign Report

This field campaign extension has been a coordinated effort involving the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility, the University of Wisconsin at Madison, and the Joint Polar Satellite System (JPSS) project to validate NOAA Unique Combined Atmospheric Processing System (NUCAPS) temperature and moisture sounding products from the Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS) instruments on board the NOAA-20 and NOAA-21 satellite platforms. In this arrangement, funding for radiosondes and balloons was provided by the JPSS project to ARM. These radiosondes were launched coincident with NOAA-20 and NOAA-21 satellite overpasses at the ARM field sites at Eastern North Atlantic (ENA), North Slope Alaska (NSA), and Southern Great Plains (SGP). Combined with other ARM data, an assessment of the radiosonde data quality was performed and post-processing corrections applied. The dedicated radiosondes were integrated into the NOAA Products Validation System (NPROVS+), which collocated the radiosondes with satellite products (NOAA, National Aeronautics and Space Administration [NASA], European Organisation for the Exploitation of Meteorological Satellites [EUMETSAT], Geostationary Operational Environmental Satellite [GOES], Constellation Observing System for Meteorology, Ionosphere, and Climate [COSMIC]) and numerical weather prediction (NWP) forecasts for use in product assessment and algorithm development. This work is a part of the NOAA-20 and NOAA-21 satellite retrieval validation efforts and provides critical accuracy assessments of the temperature and water vapor soundings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Estimating the Drivers of the Cost of Saved Electricity in Utility Customer-Funded Energy Efficiency Programs

Energy efficiency programs funded by utility customers provide an electricity resource in most U.S. states, but their scale and cost of saving electricity varies significantly by state. In this paper, we explore the drivers of the cost of saved electricity in these programs with an econometric model and nearly a decade of data reported by efficiency program administrators. We found strong evidence for economies of scale and weak evidence for diseconomies of scale, which suggests that states with low levels of efficiency savings relative to retail sales can increase the size of their efficiency programs without large increases to the cost of saved electricity. We discuss examples of energy efficiency forecasting and potential modeling in light our econometric analysis and identify methodological improvements relevant to utilities and grid operators. This paper provides insights into the economics of customer-funded efficiency programs that will support regulators, utilities, and policymakers to utilize energy efficiency as a resource.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

A new metrics framework for quantifying and intercomparing atmospheric rivers in observations, reanalyses, and climate models

We present a new atmospheric river (AR) analysis and benchmarking tool, namely Atmospheric River Metrics Package (ARMP). It includes a suite of new AR metrics that are designed for quick analysis of AR characteristics via statistics in gridded climate datasets such as model output and reanalysis. This package can be used for climate model evaluation in comparison with reanalysis and observational products. Integrated metrics such as mean bias and spatial pattern correlation are efficient for diagnosing systematic AR biases in climate models. For example, the package identifies the fact that, in CMIP5 and CMIP6 (Coupled Model Intercomparison Project Phases 5 and 6) models, AR tracks in the South Atlantic are positioned farther poleward compared to ERA5 reanalysis, while in the South Pacific, tracks are generally biased towards the Equator. For the landfalling AR peak season, we find that most climate models simulate a completely opposite seasonal cycle over western Africa. This tool can also be used for identifying and characterizing structural differences among different AR detectors (ARDTs). For example, ARs detected with the Mundhenk algorithm exhibit systematically larger size, width, and length compared to the TempestExtremes (TE) method. The AR metrics developed from this work can be routinely applied for model benchmarking and during the development cycle to trace performance evolution across model versions or generations and set objective targets for the improvement of models. They can also be used by operational centers to perform near-real-time climate and extreme event impact assessments as part of their forecast cycle.

58 GEOSCIENCES↗
NASA NTRS1977

Economic consequences of improved temperature forecasts: An experiment with the Florida citrus growers (control group results). Executive summary

A demonstration experiment is being planned to show that frost and freeze prediction improvements are possible utilizing timely Synchronous Meteorological Satellite temperature measurements and that this information can affect Florida citrus grower operations and decisions so as to significantly reduce the cost for frost and freeze protection and crop losses. The design and implementation of the first phase of an economic experiment which will monitor citrus growers decisions, actions, costs and losses, and meteorological forecasts and actual weather events was carried out. The economic experiment was designed to measure the change in annual protection costs and crop losses which are the direct result of improved temperature forecasts. To estimate the benefits that may result from improved temperature forecasting capability, control and test groups were established with effective separation being accomplished temporally. The control group, utilizing current forecasting capability, was observed during the 1976-77 frost season and the results are reported. A brief overview is given of the economic experiment, the results obtained to date, and the work which still remains to be done.

Source record↗
NASA NTRS1979

A review of the icing situation from the standpoint of general aviation

An overview of the present situation in the field of aircraft icing with respect to certification and operation of nontransport category airplanes is given. Problems of definition and inconsistencies are pointed out. Problems in the forecasting and measurement of icing intensities are discussed. The present regulatory environment is examined with respect to its applicability and appropriateness to nontransport airplanes.

Newton, D. W.↗
NASA NTRS2011

Description and Status of the North Alabama Lightning Mapping Array

The North Alabama Lightning Mapping Array (LMA) is a network LMA detectors that detects and maps lightning using VHF radiation (TV Channel 5) in a region centered about Huntsville, Alabama that includes North Alabama, Central Tennessee and parts of Georgia and Mississippi. The North Alabama LMA has been in operation since late 2001, and has been providing real time data to regional National Weather Service (NSF) Weather Forecast Offices (WFOs) since mid 2003 through the NASA Short-term Prediction Research and Transition (SPoRT) center. Data from this network (as well as other from other LMA systems) are now being used to create proxy Geostationary Lightning Mapper (GLM) data sets for GOES-R risk reduction and algorithm development activities. In addition, since spring 2009 data are provided to the Storm Prediction Center in support of Hazardous Weather Testbed and GOES-R Proving Ground activities during the Spring Program. Description, status and plans will be discussed.

Blakeslee, Richard J.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-13135-DND

Aircraft Icing - Aircraft structures act as ice nuclei in supercooled clouds - ice collects, weight increases, plane falls - Pilots need to know where and when icing can occur - PIREPS are first order: sparse, aircraft dependent, location uncertain - Model analyses and forecasts: freezing levels, cloud expectations - radar => precipitation - All combined in NCAR/FAA/NOAA/NASA program to provide Current Icing Product (CIP) & Forecast Icing product (FIP) analyses to pilots (CONUS) - some inadequacies remain - NWP uncertainties, intensity, altitude of icing, etc. - Operational satellites can add valuable information - indirectly: input of cloud properties to CIP & NWP - directly: determination of icing threat from real time satellite data

William L Smith↗
NASA NTRSDate not supplied

The Atmosphere Observing System (AOS): Synergistic Aerosol, Cloud, Convection and Precipitation Measurement and Modeling Systems

The 2017 Decadal Survey (DS) highlighted Earth System Science themes, science and application questions, and several high priority objectives that have led to the inclusion of Aerosols (A) and Clouds-Convection-Precipitation (CCP) as Designated Observables (DOs). On June 1, 2018, several NASA centers (GSFC, LaRC, JPL, MSFC, GRC and ARC) submitted a joint Study Plan to the NASA Earth Science Division for the Aerosol (A) and Cloud, Convection, and Precipitation (CCP) Pre-formulation Study (ACCP), with the ACCP Study concluding in early 2021. The new mission now in pre-phase A is being referred to as the Atmosphere Observing System (AOS), an integral part of NASA’s Earth System Observatory (ESO) strategy. The DS and the ACCP team recognized the science merit in combining the A and CCP DOs for both enhancing the ability to address a number of science objectives and also to provide an expanded capability to address additional objectives beyond those of the individual DOs. A critical element of the ACCP observing strategy is to make extensive use of new passive and active sensors as well as of the so-called Program-of-Record (PoR), complemented by a fully integrated sub-orbital component. In order to achieve maximum benefit, all these observations need to be integrated into comprehensive observing and modeling/data assimilation systems. Such an approach requires comprehensive model-data synthesis capabilities that needs to be conceived in conjunction with the space-based and suborbital components of AOS. In this presentation we will summarize the major science goals of AOS including cloud feedbacks, atmospheric convection, emphasizing aerosol processes and aerosol radiative effects, and the synergistic aspects of clouds-precipitation-aerosol interactions. We will describe examples of how AOS data will be used across space and time to better initialize forecasts and train modeling systems, and to infuse models and data assimilation systems with AOS data for advancing operational predictions and to generate expanded hindcasts and reconstruction of the climate record.

Arlindo da Silva↗
NASA NTRS2022

An Evaluation of NOAA-20 ATMS Instrument Pre-Launch and On-Orbit Performance Characterization

Passive microwave sounders provide the highest-impact observations ingested by major numerical weather prediction (NWP) forecast models. The Advanced Technology Microwave Sounder (ATMS), built by Northrop Grumman, Azusa, CA, USA, is the latest operational microwave sounder series being launched by the United States to provide both temperature and water vapor soundings of the atmosphere. The first ATMS was launched on the Suomi National Polarorbiting Partnership (SNPP) satellite in 2011. This article focuses on the details of the on-orbit performance characterization of the second ATMS, which launched on November 18, 2017, on the Joint Polar Satellite System-1 (JPSS-1) satellite. After successful commissioning, JPSS-1 was renamed National Oceanic and Atmospheric Administration (NOAA)-20 (N-20). We present performance characterizations from prelaunch and postlaunch tests, including the thermal vacuum (TVAC) campaign, and postlaunch activities that contribute to the radiance data products. Significant improvements were found for reflector emissivity, 1/ f noise performance, antenna beam efficiency, inter-channel noise correlation, and scan drive bearing design. New geolocation and pointing algorithms were evaluated. The N-20 ATMS has the same channel set, polarizations, scan geometry, and calibration approach as the SNPP ATMS. The N-20 ATMS meets all performance requirements with margin.

Advanced Technology Microwave Sounder (ATMS)↗
DOE OSTI2023

Integration of DER Adoption Forecasting into Distribution Planning: Cooperative Research and Development Final Report, CRADA Number CRD-11-00430 (Project H)

The objective of this project is to improve distributed energy resources (DER) technology, time, and locational impact analysis by incorporating customer adoption intentions and preferences into distribution planning and operations. The National Renewable Energy Laboratory (NREL) shall collaborate with EPRI staff to contribute to the development of methodology, literature review, analysis, and write-up for two sections of a report "Identification and Overview of Methods for Mapping DER Adoption Forecasts” and “Comparative Analysis of Methods for Mapping DER Adoption Forecasts."

14 SOLAR ENERGY↗
NASA NTRSDate not supplied

Lidar and UAS Measurements of Winds for the NASA Advanced Air Mobility Mission

The envisioned future of Advanced Air Mobility involves low-altitude operation of a new class of air vehicles. The low altitudes of the flight paths would have these vehicles spending most of their operation in conditions where unpredictable wind and turbulence effects may occur. Wind measurements will hence be critical to ensure safe and efficient operations for AAM. Such wind measurement could be used as a monitoring system for warning of hazardous wind events, as data input to forecasting models, or as a research tool to understand wind effects in complex environments. To meet this need NASA is evaluating wind sensing technologies with a capability to probe the atmospheric boundary layer. Doppler lidar is a leading candidate ground-based sensor, as shown by the decades-long history of being an effective tool for many wind studies. However, there is a need to re-assess the Doppler wind lidars for the AAM application which involves evaluating wind effects as vehicles operate in and out of vertiports, notably regarding spatial resolution. Meeting the needs for spatial resolution may involve the use of dual-Doppler techniques, rather than just single Doppler lidar. The study was furthermore motivated by looking toward the future of AAM, in which the air vehicles involved can also provide wind measurements. Airborne wind measurements, obtained directly from vehicle-mounted anemometers or indirectly from vehicle navigation data, offer a means to compare remotely sensed wind lidar with in-situ measurements. The following sections report on results of wind measurements obtained using lidar and the small uninhabited aircraft systems (sUAS’s) operating in the same volume of air.

Adam Medina↗
DOE OSTI2021

Nuclear Materials Process Modeling at the Y-12 National Security Complex

The Y-12 National Security Complex (Y-12) has implemented process modeling for various accountable nuclear materials operations that are performed throughout the plant. Using a discrete, event-based dynamic simulation program, key nuclear material streams are modeled, allowing Y-12 to effectively manage numerous points of interest within the plant’s production operations. Integration of the various material processes into a single, interdependent supply and demand model is one of the ongoing focuses within Y-12’s process modeling effort. The primary purpose of using dynamic simulation modeling is to allow for analysis of the nuclear materials inventories and forecasted supplies based on future demands. Analysis of these inventories includes capacity evaluation, bottleneck mitigation, and assessments of individual pieces of equipment to inform future facility investment decisions and associated project schedules. Modeling of the nuclear materials processes throughout the complex also allows for incorporation of changes relevant to production capabilities such as the upcoming transition of specific operations to the new Uranium Processing Facility. Prior to implementation of process modeling, Y-12 forecasted supply and demand of accountable nuclear materials streams using Microsoft Excel. With deterministic models such as Microsoft Excel, the annual forecasts, generated within data input condition parameters, can only provide a fixed point of data. Fixed data cannot simulate integrated material streams and account for the possibility of occurrences and other changes that dynamic simulations take into consideration. Y-12’s dynamic process modeling allows integrated simulations of multiple accountable nuclear materials processes, including supply and demand forecasting and analysis, and is a coordinated effort involving many steps of verification and validation (V&V), site briefings, testing, reporting, data mining, planning, and documentation that spans various programs throughout the Y-12 complex.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2012

An OSSE on Mesoscale Model Assimilation of Simulated HIRAD-Observed Hurricane Surface Winds

The hazards of landfalling hurricanes are well known, but progress on improving the intensity forecasts of these deadly storms at landfall has been slow. Many cite a lack of high-resolution data sets taken inside the core of a hurricane, and the lack of reliable measurements in extreme conditions near the surface of hurricanes, as possible reasons why even the most state-of-the-art forecasting models cannot seem to forecast intensity changes better. The Hurricane Imaging Radiometer (HIRAD) is a new airborne microwave remote sensor for observing hurricanes, and is operated and researched by NASA Marshall Space Flight Center in partnership with the NOAA Atlantic Oceanographic and Meteorological Laboratory/Hurricane Research Division, the University of Central Florida, the University of Michigan, and the University of Alabama in Huntsville. This instrument?s purpose is to study the wind field of a hurricane, specifically observing surface wind speeds and rain rates, in what has traditionally been the most difficult areas for other instruments to study; the high wind and heavy rain regions. Dr. T. N. Krishnamurti has studied various data assimilation techniques for hurricane and monsoon rain rates, and this study builds off of results obtained from utilizing his style of physical initializations of rainfall observations, but obtaining reliable observations in heavy rain regions has always presented trouble to our research of high-resolution rainfall forecasting. Reliable data from these regions at such a high resolution and wide swath as HIRAD provides is potentially very valuable to mesoscale forecasting of hurricane intensity. This study shows how the data assimilation technique of Ensemble Kalman Filtering (EnKF) in the Weather Research and Forecasting (WRF) model can be used to incorporate wind, and later rain rate, data into a mesoscale model forecast of hurricane intensity. The study makes use of an Observing System Simulation Experiment (OSSE) with a simulated HIRAD dataset sampled during a hurricane and uses EnKF to forecast the track and intensity prediction of the hurricane. Comparisons to truth and error metrics are used to assess the model?s forecast performance.

Albers, Cerese↗
NASA NTRS2011

Dual-Polarimetric Radar-Based Tornado Debris Paths Associated with EF-4 and EF-5 Tornadoes over Northern Alabama During the Historic Outbreak of 27 April 2011

An historic tornado and severe weather outbreak devastated much of the southeastern United States between 25 and 28 April 2011. On 27 April 2011, northern Alabama was particularly hard hit by a large number of tornadoes, including several that reached EF-4 and EF-5 on the Enhanced Fujita damage scale. In northern Alabama alone, there were approximately 100 fatalities and hundreds of more people who were injured or lost their homes during the havoc caused by these violent tornadic storms. Two long-track and violent (EF-4 and EF-5) tornadoes occurred within range of the University of Alabama in Huntsville (UAHuntsville) Advanced Radar for Meteorological and Operational Research (ARMOR, C-band dual-polarimetric). A unique capability of dual-polarimetric radar is the near-real time identification of lofted debris associated with ongoing tornadoes on the ground. The focus of this paper is to analyze the dual-polarimetric radar-inferred tornado debris signatures and identify the associated debris paths of the long-track EF-4 and EF-5 tornadoes near ARMOR. The relative locations of the debris and damage paths for each tornado will be ascertained by careful comparison of the ARMOR analysis with NASA MODIS (Moderate Resolution Imaging Spectroradiometer) and ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) satellite imagery of the tornado damage scenes and the National Weather Service tornado damage surveys. With the ongoing upgrade of the WSR-88D (Weather Surveillance Radar - 1988 Doppler) operational network to dual-polarimetry and a similar process having already taken place or ongoing for many private sector radars, dual-polarimetric radar signatures of tornado debris promise the potential to assist in the situational awareness of government and private sector forecasters and emergency managers during tornadic events. As such, a companion abstract (Schultz et al.) also submitted to this conference explores "The use of dual-polarimetric tornadic debris signatures in an operational setting."

Carey, Lawrence D.↗