Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microwave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Microwave dielectric spectrum of vegetation. I - Experimental observations. II - Dual-dispersion model

The microwave dielectric behavior of vegetation materials is examined as a function of water content, microwave frequency, and temperature. Dielectric spectra for various types of vegetation, such as leaves, stalks, and trunks at various moisture conditions, were measured using a coaxial probe technique. The basic features and operation of the coaxial probe system are described. Examples of dielectric measurements for the vegetation materials are presented, and the relation between temperature and the dielectric constant is studied. The development of a dual-dispersion model that accounts for the dielectric properties of water in both free and bound conditions is described. The applicability of the model is evaluated by comparing it with the dielectric data; good correlation is observed between the model and the data over a wide range of moisture conditions and over the 0.2-20 GHz range.

El-Rayes, Mohamed A.↗

Laboratory measurements of the microwave opacity of gaseous ammonia (NH3) under simulated conditions for the Jovian atmosphere

Microwave opacity measurements have been conducted for gaseous ammonia simulating Jovian atmosphere conditions at five frequencies from 18.5 to 1.38 cm, at temperatures from 178 to 300 K and 1-6 atm pressures. The atmospheric composition is 90-percent H/10-percent He. In the 1.38-18.5 cm wavelength range, ammonia absorption is well expressed by Berge and Gulkis' (1976) lineshape. The results obtained suggest that either an ammonia abundance 1.5-2.0 times greater than solar must be present at less than 1-2 bar, or some other microwave absorber is present.

Steffes, Paul G.↗

The microwave spectrum of asteroid Ceres

This paper presents new measurements of the microwave flux of Ceres obtained at wavelengths between 3.3 mm and 20 cm using the 12 m Kitt Peak antenna and the Very Large Array. These new measurements are combined with previous measurements to confirm a substantial decrease in flux density at centimeter wavelengths compared to millimeter wavelength. Using a statistical technique adapted from terrestrial microwave remote sensing, this spectrum has been compared with that of various candidate materials and models for the subsurface structure of Ceres. It is concluded that Ceres is largely covered with a 3-cm-thick layer whose dielectric properties resemble dry terrestrial clay. This layer may have formed by micrometeorite impact on hydrothermally altered basic or ultrabasic rock or on carbonaceous chondrite material.

Webster, W. J., Jr.↗

Passive microwave data for snow and ice research - Planned products from the DMSP SSM/I system

Recommendations which have been made for processing and distributing passive microwave data for snow and ice research obtained with the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are discussed. The general objectives for SSM/I data are reviewed, and the sensor and data flow are described. The SSM/I sea ice products are discussed, and algorithm/product validation is addressed. Proposed services and implementation after SSM/I launch are summarized.

Weawer, Ronald↗

High resolution microwave and X-ray observations of solar flares

This paper presents an analysis of high spatial resolution observations of 18 weak flares, carried out during the Solar Maximum Year in the microwave range, H-alpha, and soft X-rays, together with observations of the associated hard X-ray emission and the photospheric magnetic field. This combination of observations made it possible to obtain a picture of the flare geometry and the relative position of the various emissions, to study the change of the geometry during the flare, to estimate the electron temperature and emission measure of the thermal plasma, and to compute the contribution of the free-free process in the microwave emission. Results are interpreted as evidence for the presence of energetic electrons even in the post-burst phase of some flares. There was also found a clear case of homologous radio and X-ray bursts, one case of foot-point expansion with a relative velocity of 20 km/s at 6.16 cm, as well as some evidence of triggering of flares by disturbances moving with a velocity of 5000-13,000 km/s.

Alissandrakis, C. E.↗

Vertical resolution of middle atmospheric measurements by ground-based microwave radiometry

The vertical resolution obtainable through measurement of trace constituents in the middle atmosphere by ground-based microwave spectroscopy has remained somewhat ambiguous. In order to explore this question, the Backus-Gilbert (1967, 1968, 1970) inversion technique, which automatically yields quantitative estimates of the inversion spatial resolution was applied to this particular inverse problem. This indicated that the optimum resolution of Backus-Gilbert inversions of microwave spectroscopic measurements is about 10 km. A general technique, based on inversion of delta function simulated profiles, was then developed, for evaluating the resolution of any inversion technique and applied to the Chahine (1970) inversion technique. These results indicated that the optimum resolution of the Chahine technique is about 6 or 7 km, or nearly a factor of 2 better than the equivalent Backus-Gilbert results.

Bevilacqua, Richard M.↗

Optically-Controlled Microwave Devices And Circuits

NASA Technical Memorandum discusses physical basis and dc and microwave characteristics of optically-controlled microwave devices described in literature. Emphasis on responses of GaAs/GaAlAs high-electron-mobility transistors (HEMT's) and GaAs metal/semiconductor field-effect transistors (MESFET's) to light. Devices used to detect radio-frequency modulation of optical signals, to control gains of amplifiers, and to provide injection locking of oscillators.

Bhasin, Kul B.↗

Monolithic Microwave Switching Matrix

Gallium arsenide integrated-circuit chip switches any of three microwave input signals to any of three output ports. Measuring 4.9 mm on side, chip contains nine field-effect transistor (FET) crosspoint switches. Housed in custom-designed package with standard connectors for easy integration into system. FET's on chip operated as passive switches and consume no static power and insignificant amounts of switching power. Chip module cascades with similar modules into large arrays handling as many as 100 inputs and 100 outputs. Applications include switching and routing vast amounts of data between computers at extremely high speed. On communications satellite, chip switches microwave signals to and from Earth stations and other satellites.

Fujikawa, Gene↗

Monitoring seasonal variations of soil moisture and vegetation cover using satellite microwave radiometry

The NIMBUS-7 scanning multichannel microwave radiometer measured brightness temperatures at 5 frequencies (6.6, 10.7, 18, 21, 37 GHz), all dual-polarized with a 50 deg incidence angle over Africa since 1978. A 3 yr data set is being processed (1983 to 1985), and a theoretical model was developed, allowing investigation of the microwave emissivity of land features in the frequency range 6.6 to 37 GHz and of the extent to which vegetation and roughness can be determined in order to improve the soil moisture estimation.

Kerr, Y. H.↗

Observational results of microwave temperature profile measurements from the airborne Antarctic ozone experiment

The Microwave Temperature Profiler, MTP, is installed on NASA's ER-2 aircraft. MTP measures profiles of air temperature versus altitude. Temperatures are obtained every 13.7 seconds for 15 altitudes in an altitude region that is approximately 5 km thick (at high flight levels). MTP is a passive microwave radiometer, operating at the frequencies 57.3 and 58.8 GHz. Thermal emission from oxygen molecules provides the signal that is converted to air temperature. MTP is unique in that it is the only airborne instrument of its kind. The MTP instrument was used during the Airborne Antarctic Ozone Experiment, AAOE, to enable potential vorticity to be measured along the flight track. Other uses for the MTP data have become apparent. The most intriguing unexpected use is the detection and characterization of mountain waves that were encountered during flights over the Palmer Peninsula. Mountain waves that propagate into the polar vortex may have implications for the formation of the ozone hole. Upward excursions of air parcels lead to a brief cooling. This can begin the process of cloud formation. It is important to determine how much additional formation of polar stratospheric cloud (PSC) material is possible by the passage of air parcels through a mountain wave pattern that endures for long periods. Other mountain wave effects have been suggested, such as a speeding up of the vortex, and a consequent cooling of large air volumes (which in turn might add to PSC production).

Gary, Bruce L.↗

Estimating sea ice concentration from satellite passive microwave data and a physical model

Sea ice remote sensing and estimation of concentrations of each of several ice types from passive microwave satellite data is described. The approach is based on the Kalman filter; it incorporates surface temperature, ice advection, and ice deformation data derived from drifting buoys and uses the whole temporal microwave record to make a smoothed estimate of ice concentration. The method allows resolution of previously ambiguous surface types. An example using time histories of two SMMR measurements to resolve the fractional areas of four surface types: open water, first-year, second-year and older multiyear ice is shown.

Rothrock, D. A.↗

Measurements of complex permittivity of microwave substrates in the 20 to 300 K temperature range from 26.5 to 40.0 GHz

A knowledge of the dielectric properties of microwave substrates at low temperatures is useful in the design of superconducting microwave circuits. Results are reported for a study of the complex permittivity of sapphire (Al2O3), magnesium oxide (MgO), silicon oxide (SiO2), lanthanum aluminate (LaAlO3), and zirconium oxide (ZrO2), in the 20 to 300 Kelvin temperature range, at frequencies from 26.5 to 40.0 GHz. The values of the real and imaginary parts of the complex permittivity were obtained from the scattering parameters, which were measured using a HP-8510 automatic network analyzer. For these measurements, the samples were mounted on the cold head of a helium gas closed cycle refrigerator, in a specially designed vacuum chamber. An arrangement of wave guides, with mica windows, was used to connect the cooling system to the network analyzer. A decrease in the value of the real part of the complex permittivity of these substrates, with decreasing temperature, was observed. For MgO and Al2O3, the decrease from room temperature to 20 K was of 7 and 15 percent, respectively. For LaAlO3, it decreased by 14 percent, for ZrO2 by 15 percent, and for SiO2 by 2 percent, in the above mentioned temperature range.

Miranda, Felix A.↗

DSN 70-meter antenna microwave optics design and performance improvements. Part 1: Design optimization

The design optimizations associated with the microwave and structural upgrade of the DSN 64-m antennas are discussed. Expected area efficiency/gain performances at S- and X-band are given for both the original 64-m systems and the upgraded 70-m systems, and error estimates are developed. The DSN 70-m Upgrade Project specifications, based on predesign estimates, were 1.4-dB gain at S-band and 1.9-dB at X-band, with no degradation to critical receiving system noise temperatures. The measurements show an S-band gain increase of 1.9 dB and an average increase of 2.1 dB at X-band. The Project also delivered small receiving system noise decreases at both frequency bands. The three DSN 70-m antennas, in the initial state of mechanical adjustment as of the end of calendar year 1988, are performing with very high peak microwave area efficiencies at very nearly the engineering design expectations of 76 percent at S-band and 71 percent at X-band.

Bathker, D. A.↗

Digitally modulated bit error rate measurement system for microwave component evaluation

The NASA Lewis Research Center has developed a unique capability for evaluation of the microwave components of a digital communication system. This digitally modulated bit-error-rate (BER) measurement system (DMBERMS) features a continuous data digital BER test set, a data processor, a serial minimum shift keying (SMSK) modem, noise generation, and computer automation. Application of the DMBERMS has provided useful information for the evaluation of existing microwave components and of design goals for future components. The design and applications of this system for digitally modulated BER measurements are discussed.

Shalkhauser, Mary Jo W.↗

Passive microwave remote sensing of salinity in coastal zones

The theory of measuring coastal-zone salinity from airborne microwave radiometers is developed. The theory, as presented, shows that precision measurements of salinity favor the lower microwave frequencies. To this end, L- and S-Band systems were built, and the flight results have shown that accuracies of at least one part per thousand were achieved.The aircraft results focus on flights conducted over the Chesapeake Bay and the mouth of the Savanna River off the Georgia Coast. This paper presents no new work, but rather summarizes the capabilities of the remote sensing technique.

Swift, Calvin T.↗

Comparison of remote measurements of infrared surface temperatures and microwave soil moisture

Scatterometric measurements of active microwave soil water content and radiometric measurements of thermal IR surface temperatures were made simultaneously fron an aircraft flying 400 m over an agricultural region of France after harvesting. The surface temperatures were used to deterine soil moisture availability estimates according to the Carlson (1986) model. Surface temperature or soil moisture availability and microwave soil moisture were correlated. The standard error in the IR temperature and soil moisture availability due to influences other than soil moisture is found to be + or - 2 C. The standard deviation of the temperature/moisture availability is greater than this standard error. It is shown that correlations between soil water content and moisture availability improve with increasing spatial or temporal variance in the measure surface temperatures.

Perry, Eileen M.↗

Satellite microwave rainfall simulations with a three-dimensional dynamical cloud model

The three-dimensional, multicloud model of Tao and Soong (1986) is used to generate three-dimensional distribution of pertinent microphysical and state parameters which are used as input into a microwave radiative transfer model. The model is used to calculate upwelling radiance (brightness temperature) at microwave frequencies from 10 to 183 GHz with an ocean background. The model is used to study the relationship between simulated upwell brightness temperature and the cloud-model-generated rain rate at the surface. It is suggested that these calculations can be used to simulate satellite observed brightness temperature values and to make area-averaged rain rates.

Adler, Robert F.↗

Microwave response of an HEMT photoconductor

Interdigitated photodetectors of various geometries have been fabricated on GaAlAs/GaAs heterostructure material. Optical response characteristics of these devices have been examined at both dc and microwave frequencies. The microwave response, at frequencies to 8 GHz, was studied by illuminating the devices with the output of an internally modulated GaAlGa diode laser. Results of these measurements are presented and compared with that of GaAs photoconductors.

Claspy, P. C.↗