Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICATION FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Multi sensor transducer and weight factor

A multi-sensor transducer and processing method allow insitu monitoring of the senor accuracy and transducer `health`. In one embodiment, the transducer has multiple sensors to provide corresponding output signals in response to a stimulus, such as pressure. A processor applies individual weight factors to reach of the output signals and provide a single transducer output that reduces the contribution from inaccurate sensors. The weight factors can be updated and stored. The processor can use the weight factors to provide a `health` of the transducer based upon the number of accurate versus in-accurate sensors in the transducer.

Immer, Christopher D.↗

MPATH (Measuring Performance for Autonomy Teaming with Humans) Ground Control Station: Design Approach and Initial Usability Results

Envisioned future Advanced Air Mobility (AAM) operations will require a transition of aircraft command and control from onboard pilots to remote operators. The National Aeronautics and Space Administration (NASA) has developed a research ground control station (GCS) software called MPATH (Measuring Performance for Autonomy Teaming with Humans) to study the human factors of remote operators in a representative AAM environment, where small uncrewed aerial systems (sUAS; simulated or real) act as surrogates for larger AAM aircraft. A primary focus of the research being conducted with the MPATH GCS is scalability (i.e., one human managing multiple vehicles). MPATH has demonstrated to be a useful capability for human factors research and remote operations. Two initial usability studies and a multi-vehicle control assessment were recently conducted, and usability data and operator feedback were collected. Generally, participants rated MPATH high on usability and interface quality, whereas information quality was rated slightly lower. These results were supported by specific feedback. Several generalized GCS design recommendations are proposed based on the results and feedback from these flight activities. Future updates to MPATH will incorporate the proposed recommendations. In practice, these recommendations could be used by any GCS software designer or developer to promote usability and safety.

Advanced Air Mobility↗

DETECTION OF ATOMIC CARBON [C II] 158 {mu}m AND DUST EMISSION FROM A z 7.1 QUASAR HOST GALAXY

Using the IRAM Plateau de Bure Interferometer, we report the detection of the 158 {mu}m [C II] emission line and underlying dust continuum in the host galaxy of the quasar ULAS J112001.48+064124.3 (hereafter J1120+0641) at z 7.0842 {+-} 0.0004. This is the highest redshift detection of the [C II] line to date, and allows us to put the first constraints on the physical properties of the host galaxy of J1120+0641. The [C II] line luminosity is 1.2 {+-} 0.2 Multiplication-Sign 10{sup 9} L{sub Sun }, which is a factor {approx}4 lower than observed in a luminous quasar at z = 6.42 (SDSS J1148+5251). The underlying far-infrared (FIR) continuum has a flux density of 0.61 {+-} 0.16 mJy, similar to the average flux density of z {approx} 6 quasars that were not individually detected in the rest-frame FIR. Assuming that the FIR luminosity of L{sub FIR} = 5.8 Multiplication-Sign 10{sup 11}-1.8 Multiplication-Sign 10{sup 12} L{sub Sun} is mainly powered by star formation, we derive a star formation rate in the range 160-440 M{sub Sun} yr{sup -1} and a total dust mass in the host galaxy of 6.7 Multiplication-Sign 10{sup 7}-5.7 Multiplication-Sign 10{sup 8} M{sub Sun} (both numbers have significant uncertainties given the unknown nature of dust at these redshifts). The [C II] line width of {sigma}{sub V} = 100 {+-} 15 km s{sup -1} is among the smallest observed when compared to the molecular line widths detected in z {approx} 6 quasars. Both the [C II] and dust continuum emission are spatially unresolved at the current angular resolution of 2.0 Multiplication-Sign 1.7 arcsec{sup 2} (corresponding to 10 Multiplication-Sign 9 kpc{sup 2} at the redshift of J1120+0641).

79 ASTRONOMY AND ASTROPHYSICS↗

Factors Influencing Building Demand Flexibility

The U.S. Department of Energy’s National Roadmap for Grid-interactive Efficient Buildings (GEB) acknowledged that building demand flexibility (DF) is both an important strategy to decarbonizing the buildings sector and an important resource for meeting the changing needs of the electrical grid such as improving grid reliability. However, understanding the complexity and uncertainties in real building field performance of DF strategies is a large gap hindering stakeholders on both grid and buildings side to make investments on deploying such strategies. The research work in this report intended to advance understanding of the variability and influential factors in building demand flexibility. Adding such knowledge based on lab testing results and measured performance data from real buildings is an important contribution. The report uses standardized metrics and methods to quantify DF performance from field-measured DF datasets of two significant building groups of big-box retail and medium office buildings to present the challenge of building DF variability in multiple dimensions. The report presents findings related to how several key factors influence building demand flexibility from implementing a common, cost-effective DF control strategy (i.e., adjusting zone temperatures). The findings are supported by full-scale lab testing, field data analysis and simulation research. The authors also provided application-oriented recommendations to stakeholders such as building aggregators, utility program design professionals, sophisticated building portfolio owners, and more.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Optical characterization of free electron concentration in heteroepitaxial InN layers using Fourier transform infrared spectroscopy and a 2 Multiplication-Sign 2 transfer-matrix algebra

Fourier Transform Infrared (FTIR) reflectance spectroscopy has been implemented as a non-destructive, non-invasive, tool for the optical characterization of a set of c-plane InN single heteroepitaxial layers spanning a wide range of thicknesses (30-2000 nm). The c-plane (0001) InN epilayers were grown by plasma-assisted molecular beam epitaxy (PAMBE) on GaN(0001) buffer layers which had been grown on Al{sub 2}O{sub 3}(0001) substrates. It is shown that for arbitrary multilayers with homogeneous anisotropic layers having their principal axes coincident with the laboratory coordinates, a 2 Multiplication-Sign 2 matrix algebra based on a general transfer-matrix method (GTMM) is adequate to interpret their optical response. Analysis of optical reflectance in the far and mid infrared spectral range has been found capable to discriminate between the bulk, the surface and interface contributions of free carriers in the InN epilayers revealing the existence of electron accumulation layers with carrier concentrations in mid 10{sup 19} cm{sup -3} at both the InN surface and the InN/GaN interface. The spectra could be fitted with a three-layer model, determining the different electron concentration and mobility values of the bulk and of the surface and the interface electron accumulation layers in the InN films. The variation of these values with increasing InN thickness could be also sensitively detected by the optical measurements. The comparison between the optically determined drift mobility and the Hall mobility of the thickest sample reveals a value of r{sub H} = 1.49 for the Hall factor of InN at a carrier concentration of 1.11 Multiplication-Sign 10{sup 19} cm{sup -3} at 300 Degree-Sign {Kappa}.

36 MATERIALS SCIENCE↗

Large Scale Tensor Factorization via Parallel Sketches

Tensor factorization methods have recently gained increased popularity. A key feature that renders tensors attractive is the ability to directly model multi-relational data. In this work, we propose ParaSketch, a parallel tensor factorization algorithm that enables massive parallelism, to deal with large tensors. The idea is to compress the large tensor into multiple small tensors, decompose each small tensor in parallel, and combine the results to reconstruct the desired latent factors. Prior art in this direction entails potentially very high complexity in the (Gaussian) compression and final combining stages. Adopting sketching matrices for compression, the proposed method enjoys a dramatic reduction in compression complexity, and features a much lighter combining step. Moreover, theoretical analysis shows that the compressed tensors inherit latent identifiability under mild conditions, hence establishing correctness of the overall approach. Numerical experiments corroborate the theory and demonstrate the effectiveness of the proposed algorithm.

block term decomposition↗

Three-dimensional simulation of the Denver 11 July 1988 microburst-producing storm

A simulation of the July 11, 1988 thunderstorm near Denver, which produced a microburst of unusual intensity during the test operation of the Terminal Doppler Weather Radar system is carried out using the Terminal Area Simulation System also known as the NASA-Langley Windshear Model. The results show the evolution and structure of the storm, including hazard indices based on F-factor. Results of simulation show that the storm is of unusual structure, producing multiple low- to moderate-reflectivity microbursts formed downshear of the main precipitation shaft. The most intense of the microbursts contains a velocity differential exceeding 40 m/s, strong downdrafts, and hazardous windshear with F-factors approaching 0.2. A comparison with observations, including Doppler radar measurements and aircraft flight data, indicates that the model can proivide information that is not always apparent from observed data.

Proctor, F. H.↗

Prompt Neutron Multiplicity Measurements with Portable Detectors

Mobile detection of kilogram quantities of special nuclear materials (SNM) during maritime transportation is a challenging problem for the U.S. Department of Homeland Security. Counting neutrons emitted by the SNM and partitioning them from background neutrons of multiple origins is the most effective passive means of detecting the SNM. Unfortunately, neutron detection, counting, and partitioning in a maritime environment is complex due to the presence of spallation neutrons (commonly known as “ship effect”) and to the complicated nature of the neutron scattering in that environment. This work studied the possibilities of building a prototype neutron detector using boron- 10 (10B) as the converter in a novel form factor called “straws” that would address the above problem by examining multiplicity distributions of neutrons originating from a fissioning source. Currently, commercially manufactured fission meters (FM) are available that separate cosmic neutrons from non-cosmic neutrons and quantitatively determine the strength of a fissioning source; however, these FMs use 3He, which is becoming increasingly difficult to procure; also the size and weight of a commercial FM is not conducive to manual neutron detection operations in a maritime environment. The current project may provide a near-term solution to the crisis that has arisen from the global scarcity of 3He by offering a viable alternative to the FM. The prototype detector provides a large-area, efficient, lightweight, more granular neutron responsive detection surface (to facilitate imaging) to ease the application of the new FMs. A novel prototype fission meter is being designed at National Security Technologies, LLC, using a thin uniform coating of 10B as neutron converter (only 1 micron thick) inside a large array of thin (4 mm diameter) copper tubes. The copper tubes are only 2-mil thick, and each holds the stretched anode wire under tension and high voltage. The tubes are filled with proportional counter gas (a mixture of 90% Ar and 10% CO2). The tubes operate in proportional counter mode and attract mobile charged particles (alpha-particles) created in the nuclear interaction 10B(n, a)7Li. Several MCNPX calculations covering the substantial design parameter space of neutron multiplicity detectors have been performed and are presented. Our detector’s thermal neutron detection efficiency is compared to two Ortec commercial products, the Fission Meter and Detective-EX. Pulse height spectra originating from the charged particles created in the nuclear reaction 10B(n, a) 7Li* + 2.310 MeV (94%) – excited state (1) and 10B(n, a) 7Li + 2.792 MeV (6%) – ground state (2) are examined, and the response to incident gamma rays are demonstrated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Large area silicon sheet by EFG

A multiple growth run with three 10 cm cartridges was carried out with the best throughput rates and time percentage of simultaneous three ribbon growth achieved to date in this system. Growth speeds were between 3.2 and 3.6 cm/minute on all three cartridges and simultaneous full width growth of three ribbons was achieved 47 percent of the time over the eight hour duration of the experiment. Improvements in instrumentation and in the main zone temperature uniformity were two factors that have led to more reproducible growth conditions in the multiple ribbon furnace.

Source record↗

EpiPro, a Novel, Synthetic, Activity-Regulated Promoter That Targets Hyperactive Neurons in Epilepsy for Gene Therapy Applications

Epileptogenesis is characterized by intrinsic changes in neuronal firing, resulting in hyperactive neurons and the subsequent generation of seizure activity. These alterations are accompanied by changes in gene transcription networks, first with the activation of early-immediate genes and later with the long-term activation of genes involved in memory. Our objective was to engineer a promoter containing binding sites for activity-dependent transcription factors upregulated in chronic epilepsy (EpiPro) and validate it in multiple rodent models of epilepsy. First, we assessed the activity dependence of EpiPro: initial electrophysiology studies found that EpiPro-driven GFP expression was associated with increased firing rates when compared with unlabeled neurons, and the assessment of EpiPro-driven GFP expression revealed that GFP expression was increased ~150× after status epilepticus. Following this, we compared EpiPro-driven GFP expression in two rodent models of epilepsy, rat lithium/pilocarpine and mouse electrical kindling. In rodents with chronic epilepsy, GFP expression was increased in most neurons, but particularly in dentate granule cells, providing in vivo evidence to support the “breakdown of the dentate gate” hypothesis of limbic epileptogenesis. Finally, we assessed the time course of EpiPro activation and found that it was rapidly induced after seizures, with inactivation following over weeks, confirming EpiPro’s potential utility as a gene therapy driver for epilepsy.

60 APPLIED LIFE SCIENCES↗

An adaptive optics multiplicity census of young stars in Upper Scorpius

We present the results of a multiplicity survey of 91 stars spanning masses of ∼0.2-10 M {sub ☉} in the Upper Scorpius star-forming region, based on adaptive optics imaging with the Gemini North telescope. Our observations identified 29 binaries, 5 triples, and no higher order multiples. The corresponding raw multiplicity frequency is 0.37 ± 0.05. In the regime where our observations are complete—companion separations of 0.''1-5'' (∼15-800 AU) with magnitude limits ranging from K < 9.3 at 0.''1 to K < 15.8 at 5''—the multiplicity frequency is 0.27{sub −0.04}{sup +0.05}. For similar separations, the multiplicity frequency in Upper Scorpius is comparable to that in other dispersed star-forming regions, but is a factor of two to three higher than in denser star-forming regions or in the field. Our sample displays a constant multiplicity frequency as a function of stellar mass. Among our sample of binaries, we find that both wider (>100 AU) and higher-mass systems tend to have companions with lower companion-to-primary mass ratios. Three of the companions identified in our survey are unambiguously substellar and have estimated masses below 0.04 M {sub ☉} (two of them are new discoveries from this survey—1RXS J160929.1–210524b and HIP 78530B—although we have reported them separately in earlier papers). These three companions have projected orbital separations of 300-900 AU. Based on a statistical analysis factoring in sensitivity limits, we calculate an occurrence rate of 5-40 M {sub Jup} companions of ∼4.0% for orbital separations of 250-1000 AU, compared to <1.8% at smaller separations, suggesting that such companions are more frequent on wider orbits.

79 ASTRONOMY AND ASTROPHYSICS↗

Risk of carotid atherosclerosis is associated with low serum paraoxonase (PON1) activity among arsenic exposed residents in Southwestern Taiwan

To understand whether human paraoxonase 1 (PON1) would modulate the risk for arsenic-related atherosclerosis, we studied 196 residents from an arseniasis-endemic area in Southwestern Taiwan and 291 age- and sex-matched residents from a nearby control area where arsenic exposure was found low. Carotid atherosclerosis was defined by a carotid artery intima-media wall thickness (IMT) of > 1.0 mm. Prevalence of carotid atherosclerosis was increased in the arseniasis-endemic area as compared to the control area after adjustment for conventional risk factors (OR = 2.20, p < 0.01). The prevalence was positively associated with cumulative arsenic exposure (mg/L-year) in a dose-dependent manner. Multiple logistic regression analysis showed that in the endemic group, low serum PON1 activity was an independent risk factor for atherosclerosis (OR = 4.18 low vs. high, p < 0.05). For those of low PON1 activity and high cumulative arsenic exposure, the odds ratio for the prevalence of atherosclerosis was further increased up to 5.68 (p < 0.05). No significant association was found between atherosclerosis and four polymorphisms of the PON gene cluster (PON1 - 108C/T, PON1 Q192R, PON2 A148G, PON2 C311S). However, genetic frequencies of certain alleles including PON1 Q192, PON2 G148 and PON2 C311 were found increased in the endemic group as compared to the controls and a general Chinese population, indicating a possible survival selection in the endemic group after a long arsenic exposure history. Our results showed a significant joint effect between arsenic exposure and serum PON1 activity on carotid atherosclerosis, suggesting that subjects of low PON1 activity may be more susceptible to arsenic-related cardiovascular disease.

60 APPLIED LIFE SCIENCES↗

The role of O-linked GlcNAc modification on the glucose response of ChREBP

Research highlights: {yields} The O-linked GlcNAc modification is crucial for the glucose response. {yields} Mlx is required for nuclear localization and transcription activity of ChREBP. {yields} The presence of Mlx stabilizes ChREBP protein. -- Abstract: The carbohydrate response element-binding protein (ChREBP) functions as a transcription factor in mediating the glucose-activated gene expression of multiple liver enzymes, which are responsible for converting excess carbohydrate to storage fat. ChREBP is translocated into the nucleus in response to high glucose levels, and then up-regulates transcriptional activity. Although this glucose activation of ChREBP is generally observed only in liver cells, overexpression of wild type max-like protein X (Mlx), but not an inactive mutant Mlx, resulted in the exhibition of the ChREBP functions also in a human kidney cell line. Because high glucose conditions induce the glycosylation of cellular proteins, the effect of O-linked GlcNAc modification on ChREBP functions was examined. Treatment with an O-GlcNAcase inhibitor (PUGNAc), which increases the O-linked GlcNAc modification of cellular proteins, caused an increase in the glucose response of ChREBP. In contrast, treatment with a glutamine fructose amidotransferase inhibitor (DON), which decreases O-GlcNAcylation by inhibiting the hexosamine biosynthetic pathway, completely blocked the glucose response of ChREBP. These results suggest that the O-linked glycosylation of ChREBP itself or other proteins that regulate ChREBP is essential for the production of functional ChREBP.

60 APPLIED LIFE SCIENCES↗

User’s Guide for Biodegradation Reactions in TMVOCBio

TMVOCBio is an extended version of the TMVOC numerical reservoir simulator, with the capability of simulating multiple biodegradation reactions mediated by different microbial populations or based on different redox reactions, thus involving different electron acceptors. This modeling feature is implemented within the existing TMVOC module in iTOUGH2. TMVOCBio, originally developed by Battistelli (2003; 2004), uses a general modified form of the Monod kinetic rate equation to simulate biodegradation reactions, which effectively simulates the uptake of a substrate while accounting for various limiting factors (i.e., the limitation by substrate, electron acceptor, or nutrients). Two approaches are included: 1) a multiple Monod kinetic rate equation, which assumes all the limiting factors simultaneously affect the substrate uptake rate, and 2) a minimum Monod model, which assumes that the substrate uptake rate is controlled by the most limiting factor among those acting for the specific substrate. As the limiting factors, biomass growth inhibition, toxicity effects, as well as competitive and non-competitive inhibition effects are included. The temperature and moisture dependence of biodegradation reactions is also considered. This report provides mathematical formulations and assumptions used for modeling the biodegradation reactions, and describes additional modeling capabilities. Detailed description of input format for biodegradation reactions is presented along with sample problems.

59 BASIC BIOLOGICAL SCIENCES↗

Multi-Robot, Multi-Target Particle Swarm Optimization Search in Noisy Wireless Environments

Multiple small robots (swarms) can work together using Particle Swarm Optimization (PSO) to perform tasks that are difficult or impossible for a single robot to accomplish. The problem considered in this paper is exploration of an unknown environment with the goal of finding a target(s) at an unknown location(s) using multiple small mobile robots. This work demonstrates the use of a distributed PSO algorithm with a novel adaptive RSS weighting factor to guide robots for locating target(s) in high risk environments. The approach was developed and analyzed on multiple robot single and multiple target search. The approach was further enhanced by the multi-robot-multi-target search in noisy environments. The experimental results demonstrated how the availability of radio frequency signal can significantly affect robot search time to reach a target.

97 MATHEMATICS AND COMPUTING↗

A fundamental study of suction for Laminar Flow Control (LFC)

This report covers the period forming the first year of the project. The aim is to experimentally investigate the effects of suction as a technique for Laminar Flow Control. Experiments are to be performed which require substantial modifications to be made to the experimental facility. Considerable effort has been spent developing new high performance constant temperature hot-wire anemometers for general purpose use in the Fluid Mechanics Laboratory. Twenty instruments have been delivered. An important feature of the facility is that it is totally automated under computer control. Unprecedently large quantities of data can be acquired and the results examined using the visualization tools developed specifically for studying the results of numerical simulations on graphics works stations. The experiment must be run for periods of up to a month at a time since the data is collected on a point-by-point basis. Several techniques were implemented to reduce the experimental run-time by a significant factor. Extra probes have been constructed and modifications have been made to the traverse hardware and to the real-time experimental code to enable multiple probes to be used. This will reduce the experimental run-time by the appropriate factor. Hot-wire calibration drift has been a frustrating problem owing to the large range of ambient temperatures experienced in the laboratory. The solution has been to repeat the calibrations at frequent intervals. However the calibration process has consumed up to 40 percent of the run-time. A new method of correcting the drift is very nearly finalized and when implemented it will also lead to a significant reduction in the experimental run-time.

Watmuff, Jonathan H.↗

A stable transcription factor complex nucleated by oligomeric AML1–ETO controls leukaemogenesis

Transcription factors are frequently altered in leukaemia through chromosomal translocation, mutation or aberrant expression. AML1–ETO, a fusion protein generated by the t(8;21) translocation in acute myeloid leukaemia, is a transcription factor implicated in both gene repression and activation. AML1–ETO oligomerization, mediated by the NHR2 domain, is critical for leukaemogenesis, making it important to identify co-regulatory factors that ‘read’ the NHR2 oligomerization and contribute to leukaemogenesis. Here we show that, in human leukaemic cells, AML1–ETO resides in and functions through a stable AML1–ETO-containing transcription factor complex (AETFC) that contains several haematopoietic transcription (co)factors. These AETFC components stabilize the complex through multivalent interactions, provide multiple DNA-binding domains for diverse target genes, co-localize genome wide, cooperatively regulate gene expression, and contribute to leukaemogenesis. Within the AETFC complex, AML1–ETO oligomerization is required for a specific interaction between the oligomerized NHR2 domain and a novel NHR2-binding (N2B) motif in E proteins. Crystallographic analysis of the NHR2–N2B complex reveals a unique interaction pattern in which an N2B peptide makes direct contact with side chains of two NHR2 domains as a dimer, providing a novel model of how dimeric/oligomeric transcription factors create a new protein-binding interface through dimerization/oligomerization. Intriguingly, disruption of this interaction by point mutations abrogates AML1–ETO-induced haematopoietic stem/progenitor cell self-renewal and leukaemogenesis. These results reveal new mechanisms of action of AML1–ETO, and provide a potential therapeutic target in t(8;21)-positive acute myeloid leukaemia.

Sun, Xiao-Jian↗

Novosphingobium aromaticivorans LigR coordinates transcription of genes involved in metabolism of multiple types of aromatics

Aromatic compounds are a ubiquitous and diverse family of chemicals with functions as biomolecules, natural products, industrial chemicals, and pollutants. Novosphingobium aromaticivorans DSM 12444 uses multiple inducible pathways to catabolize H-, G-, and S-type aromatics that contain zero, one, or two methoxy groups, respectively. Here, we obtain a systems-level view of the transcriptional control of its aromatic metabolic pathways. Several in vitro analyses found that a N. aromaticivorans homolog of the Sphingobium lignivorans SYK-6 transcription factor LigR bound genomic DNA upstream of genes involved in metabolism of multiple aromatic types. We found that a ΔLigR mutant had growth defects on all three types of aromatics as sole carbon sources. Transcriptomic analysis revealed that LigR was required to increase expression of gene products that function in metabolism of all three aromatic types. We also found that, in media containing both glucose and an aromatic carbon source, the ΔLigR mutant directed intermediates through alternative aromatic metabolic pathways. Protein-DNA binding assays showed that N. aromaticivorans LigR binds immediately upstream of promoters of genes involved in aromatic metabolism. We found that N. aromaticivorans LigR coordinates the expression of enzymes that function in the catabolism of H-, G-, and S-type aromatics, and that there are differences in the role of LigR in N. aromaticivorans and S. lignivorans. A comparative genomic analysis predicted that LigR homologs and the aromatic-metabolizing genes that it directly regulates are often co-localized in the genomes of Sphingomonadales, but often not found in this arrangement in many other known aromatic metabolizing bacteria.

Aromatic Compound Degradation↗