Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLE SCATTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Pressure control of magnetic order and excitations in the pyrochlore antiferromagnet MgCr 2 ⁢O 4

MgCr 2 O 4 is one of the best-known realizations of the pyrochlore-lattice Heisenberg antiferromagnet. The strong antiferromagnetic exchange interactions are perturbed by small further-neighbor exchanges such that this compound may in principle realize a spiral spin liquid (SSL) phase in the zero-temperature limit. However, a spin Jahn-Teller transition below T N ≈ 13 K yields a complicated long-range magnetic order with multiple coexisting propagation vectors. We present neutron scattering and thermomagnetic measurements of MgCr 2 O 4 samples under applied hydrostatic pressure up to P = 1.7 GPa demonstrating the existence of multiple close-lying nearly degenerate magnetic ground states. We show that the application of hydrostatic pressure increases the ordering temperature by around 0.8 K per GPa and increases the bandwidth of the magnetic excitations by around 0.5 meV per GPa. We also evidence a strong tendency for the preferential occupation of a subset of magnetic domains under pressure. In particular, we show that the $k$ = (0,0,1) magnetic phase, which is almost negligible at ambient pressure, dramatically increases in spectral weight under pressure. This modifies the spectrum of magnetic excitations, which we interpret unambiguously as spin waves from multiple magnetic domains. Moreover, we report that the application of pressure reveals a feature in the magnetic susceptibility above the magnetostructural transition. We interpret this as the onset of a short-range ordered phase associated with $k$ = (0,0,1), previously not observed in magnetometry measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Two photon exchange with nuclei from $e^+/e^-$ elastic cross section ratios

Hadronic box diagrams pose a significant source of radiative corrections to lepton scattering and β -decay measurements, yet their calculation remains highly model-dependent. Two-photon exchange is a box diagram generally relevant to most lepton scattering experiments, and is directly detectable via multiple observables. Single-spin asymmetries (SSA) are sensitive to the imaginary part of the TPE amplitude, while the ratio of $e^+/e^-$ elastic scattering cross sections is sensitive to the real part of the TPE amplitude. While SSA measurements have been reported for several complex nuclei, measurements of the $e^+/e^-$ ratio exist only for the proton. Proposed here is a measurement of the $e^+/e^-$ ratio on 4 He, a feasible nuclear target for which the ratio’s deviation from unity due to TPE is expected to be on order of 1–2%. Choosing a low Z nucleus minimizes Coulomb distortions, which could greatly overwhelm TPE for heavier nuclei. The proposed 19-day program, including measurements at three kinematic settings between 0.3 < Q 2 < 0.4 GeV 2 , would be made possible by the addition of a positron source at Jefferson Lab.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Laterally patterned spin-valve superlattice: Magnetometry and polarized neutron scattering study

The magnetization reversal of magnetic multilayers with spin-valve like characteristics, patterned into an array of parallel stripes, was structurally and magnetically analyzed, in detail, via x-ray scattering, magnetometry, and polarized neutron reflectivity. Each stripe contains a multiple repetition of the layer sequence [Fe/Cr/Co/Cr]. X-ray and neutron scattering maps of the patterned multilayer show rich details resulting from the superposition of Bragg peaks representing the lateral in-plane periodicity and the out-of-plane multilayer period. Detailed analysis of specular and off-specular polarized neutron intensity was used to ascertain the antiparallel alignment of the Co and Fe magnetization within the kink region of their combined hysteresis loop between the coercive fields of Fe and Co layers. This includes also an examination of domain formation and inter- as well as intra-stripe correlation effects upon magnetization reversal. Our combined study shows that the shape induced anisotropy via patterning is capable of overriding the four-fold crystal anisotropy but is unable to eliminate the ripple domain state of the Co layers, already present in the continuous multilayer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Production of Λ and $K^{0}_{S}$ in jets in p–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV and pp collisions at $\sqrt{s}$ =7 TeV

The production of Λ baryons and $K^{0}_{S}$ mesons (V 0 particles) was measured in p–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV and pp collisions at $\sqrt{s}$ = 7 TeV with ALICE at the LHC. The production of these strange particles is studied separately for particles associated with hard scatterings and the underlying event to shed light on the baryon-to-meson ratio enhancement observed at intermediate transverse momentum (p T ) in high multiplicity pp and p–Pb collisions. Hard scatterings are selected on an event-by-event basis with jets reconstructed with the anti-k T algorithm using charged particles. The production of strange particles associated with jets $p^{ch}_{T,}$ jet > 10 and $p^{ch}_{T,}$ jet > 20 GeV/c in p–Pb collisions, and with jet $p^{ch}_{T,}$ jet > 10 GeV/c in pp collisions is reported as a function of p T . Its dependence on angular distance from the jet axis, R(V 0 , jet), for jets with $p^{ch}_{T,}$ jet > 10 GeV/c in p–Pb collisions is reported as well. The p T -differential production spectra of strange particles associated with jets are found to be harder compared to that in the underlying event and both differ from the inclusive measurements. In events containing a jet, the density of the V 0 particles in the underlying event is found to be larger than the density in the minimum bias events. The Λ/$K^{0}_{S}$ ratio associated with jets in p–Pb collisions is consistent with the ratio in pp collisions and follows the expectation of jets fragmenting in vacuum. On the other hand, this ratio within jets is consistently lower than the one obtained in the underlying event and it does not show the characteristic enhancement of baryons at intermediate p T often referred to as “baryon anomaly” in the inclusive measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Light-flavor particle production in high-multiplicity pp collisions at $\sqrt{\textrm{s}}$ = 13 TeV as a function of transverse spherocity

Results on the transverse spherocity dependence of light-flavor particle production (π, K, p, ϕ, K *0 , K$^{0}_{S}$, Λ, Ξ) at midrapidity in high-multiplicity pp collisions at $\sqrt{\textrm{s}}$ = 13 TeV were obtained with the ALICE apparatus. The transverse spherocity estimator ($S$$^{p_T=1}_{O}$) categorizes events by their azimuthal topology. Utilizing narrow selections on $S$$^{p_T=1}_{O}$, it is possible to contrast particle production in collisions dominated by many soft initial interactions with that observed in collisions dominated by one or more hard scatterings. Results are reported for two multiplicity estimators covering different pseudorapidity regions. The $S$$^{p_T=1}_{O}$ estimator is found to effectively constrain the hardness of the events when the midrapidity (|η| < 0.8) estimator is used.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1988

A model study of potential sampling errors due to data scatter around expendable bathythermograph transects in the tropical Pacific

A linear multiple vertical-mode model described by McPhaden et al. (1988) is used to examine potential errors due to data scatter around expendable bathythermograph (XBT) transects in the tropical Pacific. Two methods of sampling are compared. In the first, the model was sampled along approximately straight lines of grid points corresponding to the mean positions of XBT tracks in the eastern, central, and western Pacific; in the second, the model was sampled again at the dates and locations of actual XTB casts for 1979-1983. The model indicates that the data scattered zonally around XBT transects in general can lead to about 2 dyn cm error in dynamic height in composite sections of XBT data. Errors larger than 2 dyn cm occurred in regions where XBT sample spacing in the zonal direction was insufficient to resolve Rossby wave variations in the model.

Mcphaden, Michael J.↗
DOE OSTI2020

Electron plasma wave Thomson scattering on laboratory plasma jets

Plasma jets created from a 15 lm thick Al foil on a 1 MA pulsed power machine were studied using a new electron plasma wave (EPW) Thomson scattering system in conjunction with previously developed ion acoustic wave (IAW) Thomson scattering and interferometry. These diagnostics give multiple ways of measuring the electron temperature and density of the jet. Analysis of the EPW feature found the on-axis density of the jet to be between 5 X 10 18 and 1.4 X 10 19 cm -3 , which either matched or was higher than interferometry measurements. Outside of the jet, both of these diagnostics measured a density of 7 X 10 17 cm -3 . On one shot, the EPW spectral feature showed two pairs of peaks within a 250 lm scattering length on the edge of the jet, which shows that the boundary of the jet ~1 mm radius jet is 0.1 mm. While electron temperature measurements of the plasma jet are complicated by the probe beam producing inverse bremsstrahlung heating of the jet, comparison of the electron temperature measured between IAW and EPW Thomson scattering showed the EPW feature to imply significantly higher electron temperatures than the IAW feature (e.g., 160 eV vs 70 eV in one case). Various sources of this discrepancy (for example, density gradients, collisions, and a lag in ionization) and their impact on the plasma are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Modeling stimulated Brillouin backscatter from outer-cone quads across multiple inertial confinement fusion hohlraum designs

Stimulated Brillouin scattering (SBS) is a potential risk for laser damage in the experiments carried out at the National Ignition Facility (NIF), and by altering the energy deposition pattern in hohlraums, it affects the symmetry of indirect-drive inertial confinement fusion implosions. We have surveyed backward SBS on outer-cone quads across NIF integrated hohlraums of various platforms numerically, using three-dimensional (3D) simulations with the backscatter code pF3D [Berger et al. Phys. Plasmas 5, 4337 (1998)] and ray-based gain calculations. Simulated reflected powers and energies, as well as the spectrum of reflected light all compare favorably with measurements. Ray-based calculations of exponential SBS amplification (“gain”), which assume a strongly damped plasma wave and steady-state response, are performed using a novel method that includes the 3D speckled field of the laser that drives SBS. This approach is useful for understanding qualitative differences between hohlraum designs and identifying regions susceptible to SBS within hohlraums. Quantitatively, gains are not found to correlate with SBS reflectivities in 3D, necessitating fully wave-based calculations that naturally include diffraction and various temporal dependencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Convolutional neural networks for grazing incidence x-ray scattering patterns: thin film structure identification

Nano-structured thin films have a variety of applications from waveguides, gaseous sensors to piezoelectric devices. Grazing Incidence Small Angle x-ray Scattering images enable classification of such materials. One challenge is to determine structure information from scattering patterns alone. This paper highlights the design of multiple Convolutional Neural Networks (CNN) to classify nanoparticle orientation in a thin film by learning scattering patterns. The network was trained on several thin films with a success rate of 94%. We demonstrate CNN robustness under different noises as well as demonstrate the potential of our proposed approach as a strategy to decrease scattering pattern analysis time.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Validation of the Fast-Neutron Multiplicity Expressions for Fissile Mass Estimation

Neutron multiplicity analysis is a non-destructive assay technique that involves measurement of the multiplets of neutrons that are emitted from fission of fissile material. Typically, multiplicity analysis is conducted by means of a neutron multiplicity counting (NMC) system that uses capture-based thermal-neutron detectors (e.g., 3He-gas detectors). To relieve the reliance on such detectors, we have developed a fast-neutron multiplicity counting (FNMC) system that uses scatter-based, organic scintillators to directly detect the fast fission neutrons emitted from the sample. One challenge with FNMC systems, however, is that they are prone to effects of neutron cross-talk, where a single neutron may scatter and cause more than one detection event. This leads to an overestimate of the fission rate (F) and inaccurate estimation of other sample parameters such as the leakage multiplication (M) and the alpha-ratio (a) when using the traditional capture-based NMC equations. We have formulated fully generalized multiplicity expressions that account for cross-talk effects for any arbitrary order N. The validity of these expressions were verified with MCNPX-PoliMi simulations and experimental measurements; this paper will present the validation of the proposed generalized multiplicity expressions. Californium-252 and Pu metal plates were measured using the FNMC system and the data was used for neutron multiplicity analysis to estimate sample parameters F, M, and a. We demonstrate that accounting for neutron cross-talk effects of order N = 2 and 3 improves the accuracy of the estimated sample parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Calculation of the state-to-state S-matrix for tetra-atomic reactions with transition-state wave packets: H{sub 2}/D{sub 2} + OH → H/D + H{sub 2}O/HOD

This work is concerned with the calculation of state-to-state S-matrix elements for four-atom reactions using a recently proposed method based on the quantum transition-state theory. In this approach, the S-matrix elements are computed from the thermal flux cross-correlation functions obtained in both the reactant and product arrangement channels. Since transition-state wave packets are propagated with only single arrangement channels, the bases/grids required are significantly smaller than those needed in state-to-state approaches based on a single set of scattering coordinates. Furthermore, the propagation of multiple transition-state wave packets can be carried out in parallel. This method is demonstrated for the H{sub 2}/D{sub 2} + OH → H/D + H{sub 2}O/HOD reactions (J = 0) and the reaction probabilities are in excellent agreement with benchmark results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Thermal conductivity of III-V semiconductor superlattices

This paper presents a semiclassical model for the anisotropic thermal transport in III-V semiconductor superlattices (SLs). An effective interface rms roughness is the only adjustable parameter. Thermal transport inside a layer is described by the Boltzmann transport equation in the relaxation time approximation and is affected by the relevant scattering mechanisms (three-phonon, mass-difference, and dopant and electron scattering of phonons), as well as by diffuse scattering from the interfaces captured via an effective interface scattering rate. The in-plane thermal conductivity is obtained from the layer conductivities connected in parallel. The cross-plane thermal conductivity is calculated from the layer thermal conductivities in series with one another and with thermal boundary resistances (TBRs) associated with each interface; the TBRs dominate cross-plane transport. The TBR of each interface is calculated from the transmission coefficient obtained by interpolating between the acoustic mismatch model (AMM) and the diffuse mismatch model (DMM), where the weight of the AMM transmission coefficient is the same wavelength-dependent specularity parameter related to the effective interface rms roughness that is commonly used to describe diffuse interface scattering. The model is applied to multiple III-arsenide superlattices, and the results are in very good agreement with experimental findings. The method is both simple and accurate, easy to implement, and applicable to complicated SL systems, such as the active regions of quantum cascade lasers. It is also valid for other SL material systems with high-quality interfaces and predominantly incoherent phonon transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Full-sky Gravitational Lensing Simulation for Large-area Galaxy Surveys and Cosmic Microwave Background Experiments

We present 108 full-sky gravitational lensing simulation data sets generated by performing multiple-lens plane ray-tracing through high-resolution cosmological N-body simulations. The data sets include full-sky convergence and shear maps from redshifts z = 0.05 to 5.3 at intervals of $150\,{h}^{-1}\mathrm{Mpc}$ comoving radial distance (corresponding to a redshift interval of ${\rm{\Delta }}z\simeq 0.05$ at the nearby universe), enabling the construction of a mock shear catalog for an arbitrary source distribution up to z = 5.3. The dark matter halos are identified from the same N-body simulations with enough mass resolution to resolve the host halos of the Sloan Digital Sky Survey (SDSS) CMASS and luminous red galaxies (LRGs). Angular positions and redshifts of the halos are provided by a ray-tracing calculation, enabling the creation of a mock halo catalog to be used for galaxy–galaxy and cluster–galaxy lensing. The simulation also yields maps of gravitational lensing deflections for a source redshift at the last scattering surface, and we provide 108 realizations of lensed cosmic microwave background (CMB) maps in which the post-Born corrections caused by multiple light scattering are included. We present basic statistics of the simulation data, including the angular power spectra of cosmic shear, CMB temperature and polarization anisotropies, galaxy–galaxy lensing signals for halos, and their covariances. The angular power spectra of the cosmic shear and CMB anisotropies agree with theoretical predictions within 5% up to ${\ell }=3000$ (or at an angular scale $\theta \gt 0.5$ arcmin). The simulation data sets are generated primarily for the ongoing Subaru Hyper Suprime-Cam survey, but are freely available for download at http://cosmo.phys.hirosaki-u.ac.jp/takahasi/allsky_raytracing/.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Rapid 3D nanoscale coherent imaging via physics-aware deep learning

Phase retrieval, the problem of recovering lost phase information from measured intensity alone, is an inverse problem that is widely faced in various imaging modalities ranging from astronomy to nanoscale imaging. The current process of phase recovery is iterative in nature. As a result, the image formation is time consuming and computationally expensive, precluding real-time imaging. Here, we use 3D nanoscale X-ray imaging as a representative example to develop a deep learning model to address this phase retrieval problem. We introduce 3D-CDI-NN, a deep convolutional neural network and differential programing framework trained to predict 3D structure and strain, solely from input 3D X-ray coherent scattering data. Our networks are designed to be “physics-aware” in multiple aspects; in that the physics of the X-ray scattering process is explicitly enforced in the training of the network, and the training data are drawn from atomistic simulations that are representative of the physics of the material. We further refine the neural network prediction through a physics-based optimization procedure to enable maximum accuracy at lowest computational cost. 3D-CDI-NN can invert a 3D coherent diffraction pattern to real-space structure and strain hundreds of times faster than traditional iterative phase retrieval methods. Our integrated machine learning and differential programing solution to the phase retrieval problem is broadly applicable across inverse problems in other application areas.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Global bases for nonplanar loop integrands, generalized unitarity, and the double copy to all loop orders

We introduce a constructive method for defining a global loop-integrand basis for scattering amplitudes, encompassing both planar and nonplanar contributions. Our approach utilizes a graph-based framework to establish a well-defined, non-redundant basis of integrands. This basis, constructed from a chosen set of non-redundant graphs together with a selection of irreducible scalar products, provides clear insights into various physical properties of scattering amplitudes and proves useful in multiple contexts, such as on-shell Ward identities and manifesting gauge-choice independence. A key advantage of our integrand basis is its ability to streamline the generalized unitarity method. Specifically, we can directly read off the coefficients of basis elements without resorting to ansätze or solving linear equations. This novel approach allows us to lift generalized unitarity cuts — expressed as products of tree amplitudes — to loop-level integrands, facilitating the use of the tree-level double copy to generate complete gravitational integrands at any loop order. This method circumvents the difficulties in identifying complete higher-loop-order gauge-theory integrands that adhere to the color-kinematics duality. Additionally, our cut-based organization is well-suited for expansion in hard or soft limits, aiding in the exploration of ultraviolet or classical limits of scattering amplitudes.

Effective Field Theories↗
DOE OSTI2024

Dynamic Transformation of High-Architectural Nanocrystal Superlattices upon Solvent Molecule Exposure

The cluster-based body-centered-cubic superlattice (cBCC SL) represents one of the most complicated structures among reported nanocrystal assemblies, comprised of 72 truncated tetrahedral quantum dots per unit cell. Our previous report revealed that truncated tetrahedral quantum dots within cBCC SLs possessed highly controlled translational and orientational order owing to an unusual energetic landscape based on the balancing of entropic and enthalpic contributions during the assembly process. However, the cBCC SL’s structural transformability and mechanical properties, uniquely originating from such complicated nanostructures, have yet to be investigated. Herein, we report that cBCC SLs can undergo dynamic transformation to face-centered-cubic SLs in response to post-assembly molecular exposure. We monitored the dynamic transformation process using in situ synchrotron-based small-angle X-ray scattering, revealing a dynamic transformation involving multiple steps underpinned by interactions between incoming molecules and TTQDs’ surface ligands. Furthermore, our mechanistic study demonstrated that the precise configuration of TTQDs’ ligand molecules in cBCC SLs was key to their high structural transformability and unique jelly-like soft mechanical properties. While ligand molecular configurations in nanocrystal SLs are often considered minor features, our findings emphasize their significance in controlling weak van der Waals interactions between nanocrystals within assembled SLs, leading to previously unremarked superstructural transformability and unique mechanical properties. Finally, our findings promote a facile route toward further creation of soft materials, nanorobotics, and out-of-equilibrium assemblies based on nanocrystal building blocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Quantum coherent transport in SnTe topological crystalline insulator thin films

Topological crystalline insulators (TCI) are unique systems where a band inversion that is protected by crystalline mirror symmetry leads to a multiplicity of topological surface states. Binary SnTe is an attractive lead-free TCI compound; the present work on high-quality thin films provides a route for increasing the mobility and reducing the carrier density of SnTe without chemical doping. Results of quantum coherent magnetotransport measurements reveal a multiplicity of Dirac surface states that are unique to TCI. Modeling of the weak antilocalization shows variations in the extracted number of carrier valleys that reflect the role of coherent intervalley scattering in coupling different Dirac states on the degenerate TCI surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2012

Unitarity-violation in generalized Higgs inflation models

Unitarity-violation presents a challenge for non-minimally coupled models of inflation based on weak-scale particle physics. We examine the energy scale of tree-level unitarity-violation in scattering processes for generalized models with multiple scalar fields where the inflaton is either a singlet scalar or the Higgs. In the limit that the non-minimal couplings are all equal (e.g. in the case of Higgs or other complex inflaton), the scale of tree-level unitarity-violation matches the existing result. However if the inflaton is a singlet, and if it has a larger non-minimal coupling than other scalars in the model, then this hierarchy increases the scale of tree-level unitarity-violation. A sufficiently strong hierarchy pushes the scale of tree-level unitarity-violation above the Planck scale. We also discuss models which attempt to resolve the issue of unitarity-violation in Higgs Inflation.

79 ASTRONOMY AND ASTROPHYSICS↗