Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MATING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Suppression of Mg propagation into subsequent layers grown by MOCVD

Low temperature (LT) flow modulation epitaxy (FME) or “pulsed” growth was successfully used to prevent magnesium from Metalorganic Chemical Vapor Deposition (MOCVD) grown p-GaN:Mg layers riding into subsequently deposited n-type layers. Mg concentration in the subsequent layers was lowered from ∼1 × 1018 cm−3 for a medium temperature growth at 950 °C to ∼1 × 1016 cm−3 for a low temperature growth at 700 °C via FME. The slope of the Mg concentration drop in the 700 °C FME sample was 20 nm/dec—the lowest ever demonstrated by MOCVD. For growth on Mg implanted GaN layers, the drop for a medium temperature regrowth at 950 °C was ∼10 nm/dec compared to >120 nm/dec for a high temperature regrowth at 1150 °C. This drop-rate obtained at 950 °C or lower was maintained even when the growth temperature in the following layers was raised to 1150 °C. A controlled silicon doping series using LT FME was also demonstrated with the lowest and highest achieved doping levels being 5 × 1016 cm−3 and 6 × 1019 cm−3, respectively.

Agarwal, Anchal (ORCID:0000000334132186)↗

Crosstalk in microwave SQUID multiplexers

Low-temperature detector technologies provide extraordinary sensitivity for applications ranging from precision measurements of the cosmic microwave background to high-resolution, high-rate x-ray, and γ-ray spectroscopy. To utilize this sensitivity, new instruments are being built, and new instruments are imagined, with ever greater pixel counts, but the scale of these instruments is limited by the capability of the readout electronics. Microwave SQUID multiplexing addresses the needs of these future instruments, exploiting gigahertz of bandwidths of coaxial cables and broadband components to combine hundreds to thousands of signals on a single readout line. A key feature of any multiplexer is the level of crosstalk between input channels. This crosstalk can degrade the sensitivity of the instrument, introduce systematic error, or simply confound data analysis. In this letter, we explain the primary mechanisms of crosstalk in a microwave SQUID multiplexer, calculate and measure their magnitude, and consider their effect and methods of mitigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Engineering quantum-coherent defects: The role of substrate miscut in chemical vapor deposition diamond growth

The engineering of defects in diamond, particularly nitrogen-vacancy (NV) centers, is important for many applications in quantum science. A materials science approach based on chemical vapor deposition (CVD) growth of diamond and in situ nitrogen doping is a promising path toward tuning and optimizing the desired properties of the embedded defects. Herein, with the coherence of the embedded defects in mind, we explore the effects of substrate miscut on the diamond growth rate, nitrogen density, and hillock defect density, and we report an optimal angle range for the purposes of engineering coherent ensembles of NV centers in diamond according to our growth parameters. We provide a model that quantitatively describes hillock nucleation in the step-flow regime of CVD growth, shedding insight on the physics of hillock formation. We also report significantly enhanced incorporation of nitrogen at hillock defects, opening the possibility for templating hillock-defect-localized NV center ensembles for quantum applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A microwave SQUID multiplexer optimized for bolometric applications

A microwave SQUID (superconducting quantum interference device) has been optimized for reading out large arrays of superconducting transition-edge sensor (TES) bolometers. We present the scalable cryogenic multiplexer chip design that may be used to construct an 1820-channel multiplexer for the 4-8 GHz rf band. The key metrics of yield, sensitivity, and crosstalk are determined through measurements of 455 readout channels, which span 4-5 GHz. The median white-noise level is 45 pA/ $\sqrt{Hz}$, evaluated at 2 Hz, with a 1/f knee ≤ 20 mHz after common-mode subtraction. The white-noise level decreases the sensitivity of a TES bolometer optimized for detection of the cosmic microwave background at 150 GHz by only 3%. The measured crosstalk between any channel pair is ≤ 0.3%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A model for excess Johnson noise in superconducting transition-edge sensors

Transition-edge sensors (TESs) are two-dimensional superconducting films utilized as highly sensitive detectors of energy or power. These detectors are voltage biased in the superconducting-normal transition where the film resistance is both finite and a strong function of temperature. Unfortunately, the amount of electrical noise observed in TESs exceeds the predictions of existing noise theories. We describe a possible mechanism for the unexplained excess noise, which we term “mixed-down noise.” The source is Johnson noise, which is mixed down to low frequencies by Josephson oscillations in devices with a nonlinear current–voltage relationship. We derive an expression for the power spectral density of this noise and show that its predictions agree with measured data.

Wessels, Abigail (ORCID:0000000173918339)↗

Temporal structure of blobs in NSTX

The time dependence of the blob pulse shape and the waiting time between blobs was found using data from the gas puff imaging diagnostic in NSTX. The database used was of 103 shots from 2010 as described in a previous paper (Zweben et al., Phys. Plasmas 29, 012505 (2022).]. The blob pulse shape was well fit by an exponential rise and fall where the average rise time was τ r = 9.0 ± 2.7 μs and the average fall time was τ f = 16.6 ± 5.8 μs. The waiting times between blob pulses above a threshold of three times the mean had a broad distribution with an average of τ w = 1.2 ± 0.85 ms over the database. The blob intermittency parameter γ b = τ d /τ w , where the blob pulse duration was τ d = τ r + τ f , ranged from γ b ~1% to 5% for shots in this database and increased almost linearly with the blob fraction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Indium as a surfactant: Effects on growth morphology and background impurity in GaN films grown by ammonia-assisted molecular beam epitaxy

We report on the improvement of the surface morphology of c-plane GaN films grown at high growth rates (~1 µm/h) using ammonia molecular beam epitaxy through a series of growth optimizations as well as the introduction of indium as a surfactant. The indium surfactant was expected to help with the adatom mobility and, thus, provide smoother growth surfaces. Through a combination of varying V/III ratios, In flux, and growth temperatures, an optimal condition for surface morphology, characterized by atomic force microscopy, was achieved. At higher Ga fluxes for fast growth rates (~1 µm/h and beam equivalent pressures of ~5 × 10 –7 Torr), higher ammonia flows were necessary to preserve the surface morphology. In addition, indium was an effective surfactant—reducing the roughness and improving the overall surface morphology. However, excessive indium causes the surface morphology to degrade, potentially due to the enhancement of the Ga desorption from the surface as a result of the reaction of indium with ammonia for high indium fluxes. The indium surfactant also resulted in a reduction of background Si impurity concentrations in the film. These effects allow for the growth of thick drift layers with low background dopant concentrations for vertical GaN power devices.

36 MATERIALS SCIENCE↗

SLAC microresonator RF(SMuRF) electronics: A tone-tracking readout system for superconducting microwave resonator arrays

Here, we describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems, such as microwave superconducting quantum interference device multiplexers (μmux) or microwave kinetic inductance detectors. Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arrays of cryogenic sensors, which in turn necessitate highly multiplexed readout and accompanying room-temperature electronics. Microwave-frequency resonators are a popular tool for cryogenic multiplexing, with the potential to multiplex thousands of detector channels on one readout line. The SMuRF system provides the capability for reading out up to 3328 channels across a 4–8 GHz bandwidth. Notably, the SMuRF system is unique in its implementation of a closed-loop tone-tracking algorithm that minimizes RF power transmitted to the cold amplifier, substantially relaxing system linearity requirements and effective noise from intermodulation products. Here, we present a description of the hardware, firmware, and software systems of the SMuRF electronics, comparing achieved performance with science-driven design requirements. In particular, we focus on the case of large-channel-count, low-bandwidth applications, but the system has been easily reconfigured for high-bandwidth applications. The system described here has been successfully deployed in lab settings and field sites around the world and is baselined for use on upcoming large-scale observatories.

47 OTHER INSTRUMENTATION↗

Two-dimensional spin systems in PECVD-grown diamond with tunable density and long coherence for enhanced quantum sensing and simulation

Systems of spins engineered with tunable density and reduced dimensionality enable a number of advancements in quantum sensing and simulation. Defects in diamond, such as nitrogen-vacancy (NV) centers and substitutional nitrogen (P1 centers), are particularly promising solid-state platforms to explore. However, the ability to controllably create coherent, two-dimensional spin systems and characterize their properties, such as density, depth confinement, and coherence, is an outstanding materials challenge. We present a refined approach to engineer dense (≳1 ppm ∙ nm), 2D nitrogen, and NV layers in diamond using delta-doping during plasma-enhanced chemical vapor deposition epitaxial growth. We employ both traditional materials techniques, e.g., secondary ion mass spectrometry, alongside NV spin decoherence-based measurements to characterize the density and dimensionality of the P1 and NV layers. We find P1 densities of 5–10 ppm ∙ nm, NV densities between 1 and 3.5 ppm ∙ nm tuned via electron irradiation dosage, and depth confinement of the spin layer down to 1.6 nm. We also observe high (up to 0.74) ratios of NV to P1 centers and reproducibly long NV coherence times, dominated by dipolar interactions with the engineered P1 and NV spin baths.

36 MATERIALS SCIENCE↗

Improved microwave SQUID multiplexer readout using a kinetic-inductance traveling-wave parametric amplifier

We report on the use of a kinetic-inductance traveling-wave parametric amplifier (KITWPA) as the first amplifier in the readout chain of a microwave superconducting quantum interference device (SQUID) multiplexer (μmux). This μmux is designed to multiplex signals from arrays of low temperature detectors, such as superconducting transition-edge sensor microcalorimeters. When modulated with a periodic flux-ramp to linearize the SQUID response, the flux noise improves, on average, from 1.6 μ $\Phi$ 0 /$\sqrt{Hz}$ with the KITWPA off to 0.77 μ $\Phi$ 0 /$\sqrt{Hz}$ with the KITWPA on. When statically biasing the μmux to the maximally flux-sensitive point, the flux noise drops from 0.45 μ $\Phi$ 0 /$\sqrt{Hz}$ to 0.2 μ $\Phi$ 0 /$\sqrt{Hz}$⁠. We validate this new readout scheme by coupling a transition-edge sensor microcalorimeter to the μmux and detecting background radiation. In conclusion, the combination of μmux and KITWPA provides a variety of new capabilities including improved detector sensitivity and more efficient bandwidth utilization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absolute electron density fluctuation reconstruction for two-dimensional hydrogen beam emission spectroscopy

Scrape-off layer (SOL) and edge plasma turbulence significantly contribute to the radial particle and heat transport, lowering the plasma confinement and increasing the heat load on the plasma facing components. SOL turbulence is predominantly intermittent, which manifests in the occurrence of isolated density filaments or blobs. Filaments propagate radially outward toward plasma facing components, limiting their lifetime by erosion and sputtering. To characterize this phenomenon in detail, few diagnostic techniques are available. Beam emission spectroscopy is a diagnostic capable of measuring plasma turbulence in both SOL and edge plasmas. Due to the finite lifetime of the excitation states during the beam–plasma interaction and the misalignment between the optics and the magnetic field, spatial smearing is introduced in the measurement. In this paper, a novel method is introduced to overcome this hindering effect by inverting the fluctuation response matrix on an optimally smoothed signal. We show that this method is fast and provides significantly more accurate absolute density fluctuation reconstruction than the direct inversion technique. Here, the presented method is usable for all types of beam emission diagnostics where the spatial resolution is higher than the combined smearing of the atomic physics and the observation.

47 OTHER INSTRUMENTATION↗

Demonstration of a 1820 channel multiplexer for transition-edge sensor bolometers

The scalability of most transition-edge sensor arrays is limited by the multiplexing technology, which combines their signals over a reduced number of wires and amplifiers. Here, in this Letter, we present and demonstrate a multiplexer design optimized for transition-edge sensor bolometers with 1820 sensors per readout unit, a factor of two more than the previous state-of-the-art. The design is optimized for cosmic microwave background imaging applications, and it builds on previous microwave superconducting quantum interference device multiplexers by doubling the available readout bandwidth to the full 4–8 GHz octave. Evaluating the key performance metrics of yield, sensitivity, and crosstalk through laboratory testing, we find an end-to-end operable detector yield of 78%, a typical nearest-neighbor crosstalk amplitude of ∼0.4%, and a median white noise level of 83 pA/$\sqrt{\textrm{Hz}}$ due to the multiplexer, corresponding to an estimated contribution of 4% to the total system noise for a ground-based cosmic microwave background telescope. Additionally, we identify a possible path toward reducing resonator loss for future designs with reduced noise. We expect these developments to alleviate the system complexity, cryogenic requirements, and cost of future large arrays of low temperature detectors.

cosmic microwave background↗

SPECTROSCOPIC EFFECTS IN CH{sub 4}/H{sub 2}O ICES

Recent observations of CH{sub 4} in different astrophysical objects encourage laboratory research on methane/water ice mixtures. An IR spectroscopy laboratory investigation is presented on these systems. Co-deposited samples are formed by vapor deposition of CH{sub 4} and H{sub 2}O on a cold substrate, in a wide range of stoichiometries, from very diluted mixtures to CH{sub 4}/H{sub 2}O = 2.5 values. Samples are prepared at 14 K and at 40 K, and their temperature behavior is studied when they are warmed up to 60 K. The spectroscopic analysis is centered on the methane features, and also on the water dangling bonds (DBs) that appear in the spectra of the mixtures. The IR forbidden nu{sub 1} band shows up in the spectrum (3.44 {mu}m), indicating some form of distorted methane. The combination bands nu{sub 3} + nu{sub 4} and nu{sub 1} + nu{sub 4} are seen at 2.32 and 2.38 {mu}m, and the nu{sub 2} + nu{sub 3} band weakly at 2.21 {mu}m. Whereas nu{sub 3} is not shifted in spectra of mixed samples, the wavenumber peak of nu{sub 4} and its combination bands vary in a 6 cm{sup -1} range, providing a possible estimation for the relative methane concentration in the sample. Bands in the spectra of mixtures are always broader than their counterparts in pure CH{sub 4} ice. The intensity of nu{sub 4} appears to increase in mixed samples with respect to the pure solid. Raising the temperature of the ices up to 60 K liberates part of the methane, but a fraction is retained with a maximum value of approx7% +- 2%. This limit may provide information on the temperature properties of astrophysical objects. The different spectral characteristics of water DBs with increasing methane proportion in mixed samples can also furnish information to estimate the stoichiometry of the mixture.

79 ASTRONOMY AND ASTROPHYSICS↗

WATER-AMMONIUM ICES AND THE ELUSIVE 6.85 {mu}m BAND

The 6.85 {mu}m band observed in the spectra of young stellar objects has been analyzed recently and the most usually accepted assignment to the nu{sub 4} bending mode of NH{sub 4} {sup +} is still under debate. We present here a laboratory study of frozen solutions of NH{sub 4} {sup +}Cl{sup -} in water in an astrophysical range of concentrations and temperatures. The samples are prepared by hyper-quenching of liquid droplets on a cold substrate. The nu{sub 4} band of NH{sub 4} {sup +}, which is very strong in the pure crystal and in the liquid solution at ambient temperature, becomes almost blurred in IR spectra of the frozen solution. The effect of the chlorine anion is expected to be of little relevance in this study. The experimental results are supported by theoretical calculations, which predict a broad range of weak nu{sub 4} features for amorphous samples containing different ammonium environments. The present results indicate that the ammonium ion surrounded by water molecules only cannot suffice to explain this spectral feature. This paper contributes with new evidence to the discussion on the assignment of the 6.85 {mu}m band.

79 ASTRONOMY AND ASTROPHYSICS↗

AMMONIUM AND FORMATE IONS IN INTERSTELLAR ICE ANALOGS

The so-called hyperquenching technique has been applied to generate water ices containing ammonium and formate ions by sudden freezing of droplets of NH{sub 4}Cl, NH{sub 4}COOH, and NaCOOH solutions. Salt deposits were obtained after heating the ices to 210 K to sublimate all water content. All stages are controlled by IR transmission spectroscopy. The NH{sub 4} {sup +} bands are very much broadened and smeared in the frozen droplets, but stand out strongly when water is eliminated. This fact hints toward the difficulty in ascertaining the presence of this species in astrophysical water-containing ices. Vapor-deposited ices of NH{sub 3}/HCOOH and H{sub 2}O/NH{sub 3}/HCOOH mixtures have also been studied for comparison. HCOO{sup -} and NH{sub 4} {sup +} ions are found to be formed in small proportion even at the lowest temperature, 14 K. By thermal processing, their IR bands become stronger, and at 210 K, after water sublimation, they yield IR spectra similar to those obtained from hyperquenched samples. The observations are interpreted in terms of the varying ion arrangement within the solids along the warming process. A direct comparison to laboratory spectra of irradiated samples, as performed by other groups, is not straightforward.

79 ASTRONOMY AND ASTROPHYSICS↗

X-RAY IONIZATION OF HEAVY ELEMENTS APPLIED TO PROTOPLANETARY DISKS

The consequences of the Auger effect on the population of heavy-element ions are analyzed for the case of relatively cool gas irradiated by keV X-rays with intended applications to the accretion disks of young stellar objects. Highly charged ions are rapidly reduced to the doubly charged state in neutral gas, so the aim here is to derive the production rates for these singly and doubly charged ions and to specify their transformation by recombination, charge transfer, and molecular reactions. The theory is illustrated by calculations of the abundances of 11 of the most cosmically abundant heavy elements in a model of a typical T Tauri star disk. The physical properties of the gas are determined with an X-ray irradiated thermal-chemical model, which shows that the disk atmosphere consists of a hot atmosphere overlaying the mainly cool body of the disk. There is a warm transition layer where hydrogen, carbon, and oxygen are transformed from atomic to molecular species and the ionization drops by several orders of magnitude. The doubly charged ions are then largely confined to the hot outer layers of the disk. The nature of the dominant ions below the transition depends sensitively on the poorly constrained abundances of the heavy elements. Observational consequences and connections with the active layers of the magnetorotational instability are briefly discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

HDO INFRARED DETECTION SENSITIVITY AND D/H ISOTOPIC EXCHANGE IN AMORPHOUS AND CRYSTALLINE ICE

The sensitivity of the OD stretching band as a probe to detect HDO in astrophysical ice is discussed based on IR laboratory spectra of HDO molecules embedded in H{sub 2}O ice. This band is extremely broad and tends to disappear into the absorption continuum of H{sub 2}O for low-temperature amorphous samples. Detectable HDO/H{sub 2}O ratios with this technique may range from a few percent for amorphous samples to a few per thousand in crystalline ice. These relatively high upper limits and the appreciable dependence of the band shape on temperature, which would complicate the interpretation of data from many lines of sight, decisively limit the usefulness of the technique for HDO detection in astronomical observations. The process of isotopic H/D exchange in mixed ice of H{sub 2}O/D{sub 2}O is also studied through the evolution of the OD band in IR spectra. Isotopic exchange starts at {approx}120 K and is greatly accelerated at 150 K, as crystallization proceeds in the ice. Annealed amorphous samples prove to be more favorable for isotope exchange than samples directly formed in crystalline phase. The annealing process seems to favor a polycrystalline ice morphology with a higher defect activity. These morphology differences can be of relevance for deuterium fractionation in astronomical environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FORMATION OF ORGANIC MOLECULES AND WATER IN WARM DISK ATMOSPHERES

Observations from Spitzer and ground-based infrared spectroscopy reveal significant diversity in the molecular emission from the inner few AU of T Tauri disks. We explore theoretically the possible origin of this diversity by expanding on our earlier thermal-chemical model of disk atmospheres. We consider how variations in grain settling, X-ray irradiation, accretion-related mechanical heating, and the oxygen-to-carbon ratio can affect the thermal and chemical properties of the atmosphere at 0.25-40 AU. We find that these model parameters can account for many properties of the detected molecular emission. The column density of the warm (200-2000 K) molecular atmosphere is sensitive to grain settling and the efficiency of accretion-related heating, which may account, at least in part, for the large range in molecular emission fluxes that have been observed. The dependence of the atmospheric properties on the model parameters may also help to explain trends that have been reported in the literature between molecular emission strength and mid-infrared color, stellar accretion rate, and disk mass. We discuss whether some of the differences between our model results and the observations (e.g., for water) indicate a role for vertical transport and freezeout in the disk midplane. We also discuss how planetesimal formation in the outer disk (beyond the snowline) may imprint a chemical signature on the inner few AU of the disk and speculate on possible observational tracers of this process.

79 ASTRONOMY AND ASTROPHYSICS↗