Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Stress-induced structural changes in superconducting Nb thin films

Here we report on the analysis of stress-induced structural changes and the formation of an omega (ω) phase in polycrystalline Nb thin films deposited on Si by high-power impulse magnetron sputtering (HiPIMS) for superconducting qubits using x-ray diffraction (XRD), transmission electron microscopy (TEM), and density-functional theory (DFT). XRD analysis indicates that internal stresses in the Nb thin films lead to the formation of {112}$\langle$111$\rangle$ deformation twins and TEM analysis shows that ω phases nucleate at some of the twin boundaries in the Nb thin films. The size of ω phases ranges from 10 to 100 nm, which is comparable to the coherence length of Nb (≈40 nm), and ≈1% volume fraction of Nb grains exhibit this ω phase. The details of the formation mechanism and superconducting properties of the ω phases are investigated by DFT and potential roles of the ω phase in Nb as a source of decoherence in superconducting qubits are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetostriction and temperature dependent Gilbert damping in boron doped Fe 80 ⁢Ga 20 thin films

Magnetic thin films with strong magnetoelastic coupling and low Gilbert damping are key materials for many magnetoelectric devices. Here, we investigated the effects of boron doping concentration on magnetostriction and temperature dependent Gilbert damping in magnetron sputtered (Fe 80 ⁢Ga 20 ) 1−𝑥 ⁢B 𝑥 films. A crystalline to amorphous structural transition was observed for a boron content near 8% and coincided with a decrease in coercivity from 76 Oe to 3 Oe. A 10% doping concentration is optimal for achieving both large magnetostriction of 48.8 ppm and low Gilbert damping of 6×10 −3 . The temperature dependence of the damping shows an increase at low temperatures with a peak around 40 K, and we associate the relative increase Δ⁢𝛼/𝛼 RT with magnetoelastic contributions to the damping, which has a maximum of 55.7% at 8% boron. An increase in the inhomogeneous linewidth broadening was observed in the structural transition regime at about 8% boron concentration. Furthermore, this study suggests that incorporation of glass forming elements, in this case boron, into Fe 80 ⁢Ga 20 is a practical pathway for simultaneously achieving enhanced magnetoelastic coupling and reduced Gilbert damping.

Cryogenics↗

Significant texture improvement in single-crystalline-like materials on low-cost flexible metal foils through growth of silver thin films

Low texture spreads of single-crystalline-like materials are critical for high performance of low-cost flexible semiconductors and second-generation high-temperature superconductors based on metal foils. For texture improvement, a single-crystalline-like Ag film is epitaxially grown on an ion-beam-assisted deposition TiN substrate using magnetron sputtering. Ultra-low texture spreads are found in the thin Ag film (∼330 nm), with an out-of-plane texture spread (Δω) of ∼1.03° and an in-plane texture spread (Δϕ) of ∼1.34°. Compared with the texture spreads of the TiN substrate, Δω and Δϕ of the Ag film are reduced by ∼42 and ∼79%, respectively. Applying this Ag buffer, the texture spreads of a single-crystalline-like Ge film are reduced by ∼37% (Δω) and ∼36% (Δϕ). Factors contributing to the texture improvement by Ag are studied using single-crystalline-like Ag films with various thicknesses.

Chemistry↗

Impact of the Stack Order in Cu-Zn-Sn Metal Precursors on the Properties of Cu2ZnSnS4 Thin Films

Cu2ZnSnS4 (CZTS) thin films were grown by the annealing of metallic precursors with different stack orders in sulfur atmosphere. The sequential deposition of the metal layers from single Cu, Zn, and Sn targets on Mo-coated soda-lime glass substrates was carried out using radio-frequency magnetron sputtering. In this work, we investigated the effect of the sequence of metal layers on the chemical, structural, and morphological properties of the final CZTS films using X-ray fluorescence (XRF), X-ray diffraction (XRD), Raman scattering spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy. The realized stack sequences were Mo/Sn/Zn/Cu, Mo/Sn/Cu/Zn, Mo/Cu/Zn/Sn, Mo/Cu/Sn/Zn, and Mo/Zn/Cu/Sn. XRF measurements revealed notable impact of the metal layers' stacking order in the precursor on the chemical composition. It also showed Sn loss and high Zn concentration in all sulfurized films; however, having Cu on the Sn or Zn/Sn layer showed some minimization of the Sn loss. XRD showed CZTS films with good crystallinity and no evidence of the presence of secondary phases. Changing the precursor stack order did not show any influence on the films' crystallinity or texture. Raman spectroscopy, in contrast, indicated the presence of ZnS phase beside the main CZTS phase. The morphology study showed significant effect on the structure of the final CZTS films depending on the used stack order. Generally, the films that originated from precursors having a Zn layer deposited directly on Mo or as the second layer exhibited better adhesion to the Mo layer and showed fewer or even no voids compared to the other films.

14 SOLAR ENERGY↗

SnO2 Buffer Layers for High Efficiency CdSeTe/CdTe Devices

SnO2 buffer layers of different thickness were deposited onto TEC 15 Fluorine doped tin oxide coated glass substrates using rf magnetron sputtering. The buffer layers were then incorporated into Cu-doped CdSeTe/CdTe devices using a range of CdCl 2 activation treatments and CuCl2 annealing temperatures to determine the effects of buffer layer thickness on device performance. Results show that all devices fabricated with thinner buffer layers resulted in much better J - V characteristics than their thicker counterparts. This was mainly due to a reduced open-circuit voltage (Voc) when using thicker buffer layers. The best device produced a conversion efficiency of 16.59%, fill factor of 71.62%, Jsc of 28.44 mA/cm 2 and Voc of 814.23 mV.

buffer layers↗

Superconductivity in Nb-Sn Thin Films of Stoichiometric and Off-Stoichiometric Compositions

Binary Nb-Sn thin film samples were fabricated and characterized in terms of their composition, morphology, and superconducting properties. Nb-Sn was magnetron-sputtered onto heated R-plane sapphire substrates at 700 °C, 800 °C, and 900 °C, using a custom-built heater assembly. Samples were cut into strips, where each strip has a unique composition. For a subset of the samples, Nb-Sn was selectively etched away at an etching rate of 6 ± 1 nm/s using an aqueous solution of 3 vol. % hydrofluoric and 19 vol. % nitric acid. The sample composition was investigated with a scanning electron microscope with an X-ray energy dispersive spectroscopy detector. Surface and cross-section morphologies were investigated using scanning electron microscopy and scanning transmission electron microscopy, revealing a dense columnar poly-crystalline grain structure. X-ray diffraction measurements indicate a highly textured film that is (100) oriented out-of-plane and random in-plane. The critical temperature Tc (ranging from 9.8 to 17.9 K), critical magnetic field μ-0 H c2 (ranging from 12.5 to 31.3 T), residual resistivity ratio (RRR), and normal state resistivity ρ 0 were measured and found to be broadly consistent with literature data on bulk Nb- 3 Sn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Materials Study of NbN and Ta x N Thin Films for SNS Josephson Junctions

We investigated properties of NbN and Ta x N thin films grown at ambient temperatures on SiO 2 /Si substrates by reactive-pulsed laser deposition and reactive magnetron sputtering (MS) as a function of N 2 gas flow. Both techniques produced films with smooth surfaces, where the surface roughness did not depend on the N 2 gas flow during growth. High crystalline quality, (111) oriented NbN films with T c up to 11 K were produced by both techniques for N contents near 50%. The low temperature transport properties of the Ta x N films depended upon both the N 2 partial pressure used during growth and the film thickness. Furthermore, the root mean square surface roughness of Ta x N films grown by MS increased as the film thickness decreased down to 10 nm.

36 MATERIALS SCIENCE↗

SNS Josephson Junctions With Tunable Ta–N Barriers

In this paper, we report on the fabrication and characterization of Nb/Ta-N/Nb Josephson junctions grown by room temperature magnetron sputtering on 150-mm diameter Si wafers. Junction characteristics depend upon the Ta-N barrier composition, which was varied by adjusting the N 2 flow during film deposition. Higher N 2 flow rates raise the barrier resistance and increase the junction critical current. This work demonstrates the viability of Ta-N as an alternative barrier to aluminum oxide, with the potential for large scale integration.

36 MATERIALS SCIENCE↗

Microwave Vortex Motion Characterization of Nb$_{3}$ Sn Coatings for Applications in High Magnetic Fields

In this work, microwave measurements carried out in dielectric-loaded resonators exposed to high magnetic fields are exploited to yield the surface impedance of Nb$_3$ Sn superconducting coatings deposited via two different techniques: vapor tin diffusion, and DC magnetron sputtering. The obtained data lead to qualitative interpretations on both the Nb$_3$ Sn superconducting properties, and vortex-dynamics and pinning, of each coating separately, as well as simple distinctive features when comparing those. When examining the respective surface impedances at varying field, it is expected that the studied films perform at substantially diverse magnitudes of flux-flow resistivity, but also in well-differentiated pinning regimes, yet the obtained surface resistances of both samples are comparable, thus demonstrating that there is room for film optimization at the expense of certain compromise between the parameters involved.

Nb3Sn↗

Spin Hall magnetoresistance in CoFe 2 O 4 /Pt films

Pulse laser deposition and magnetron sputtering techniques have been employed to prepare MgO(001)//CoFe 2 O 4 /Pt samples. Cross section transmission electron microscope results prove that the CoFe 2 O 4 film epitaxially grew along (001) direction. X-ray magnetic circular dichroism results show that magnetic proximity effect in this sample is negligible. Magnetoresistance (MR) properties confirm that spin Hall MR (SMR) dominates in this system. Spin Hall effect-induced anomalous Hall voltage was also observed in this sample. Lastly, these results not only demonstrate the universality of SMR effect but also demonstrate the utility in spintronics of CoFe 2 O 4 as a new type of magnetic insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Conductivity in Nanocrystalline Ceria Thin Films

The thermal conductivity of nanocrystalline ceria films grown by unbalanced magnetron sputtering is determined as a function of temperature using laser-based modulated thermoreflectance. The films exhibit significantly reduced conductivity compared with stoichiometric bulk CeO2. A variety of microstructure imaging techniques including X-ray diffraction, scanning and transmission electron microscopy, X-ray photoelectron analysis, and electron energy loss spectroscopy indicate that the thermal conductivity is influenced by grain boundaries, dislocations, and oxygen vacancies. The temperature dependence of the thermal conductivity is analyzed using an analytical solution of the Boltzmann transport equation. The conclusion of this study is that oxygen vacancies pose a smaller impediment to thermal transport when they segregate along grain boundaries.

99 GENERAL AND MISCELLANEOUS↗

Transparent conducting impurity-doped ZnO thin films prepared using oxide targets sintered by millimeter-wave heating

The preparation of transparent conducting impurity-doped ZnO thin films by both pulsed laser deposition (PLD) and magnetron sputtering deposition (MSD) using impurity-doped ZnO targets sintered with a newly developed energy saving millimeter-wave (28 GHz) heating technique is described. Al-doped ZnO (AZO) and V-co-doped AZO (AZO:V) targets were prepared by sintering with various impurity contents for 30 min at a temperature of approximately 1250 degree sign C in an air or Ar gas atmosphere using the millimeter-wave heating technique. The resulting resistivity and its thickness dependence obtainable in thin films prepared by PLD using millimeter-wave-sintered AZO targets were comparable to those obtained in thin films prepared by PLD using conventional furnace-sintered AZO targets; a low resistivity on the order of 3x10{sup -4} {Omega} cm was obtained in AZO thin films prepared with an Al content [Al/(Al+Zn) atomic ratio] of 3.2 at. % and a thickness of 100 nm. In addition, the resulting resistivity and its spatial distribution on the substrate surface obtainable in thin films prepared by rf-MSD using a millimeter-wave-sintered AZO target were almost the same as those obtained in thin films prepared by rf-MSD using a conventional powder AZO target. Thin films prepared by PLD using millimeter-wave-sintered AZO:V targets exhibited an improved resistivity stability in a high humidity environment. Thin films deposited with a thickness of approximately 100 nm using an AZO:V target codoped with an Al content of 4 at. % and a V content [V/(V+Zn) atomic ratio] of 0.2 at. % were sufficiently stable when long-term tested in air at 90% relative humidity and 60 degree sign C.

36 MATERIALS SCIENCE↗

Structure and mechanical properties of nanoscale multilayered CrN/ZrSiN coatings

Nanocrystalline/amorphous CrN/ZrSiN multilayer coatings with a bilayer thickness ranging from 11 to 153 nm were prepared by reactive magnetron sputtering technique. The microstructure and mechanical properties of these thin films were characterized by x-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and nanoindentation. The formation of nanocrystalline CrN and nanocomposite ZiSiN in the single layer coatings was identified by XRD and FTIR. The periodic structure of the as-deposited multilayer coatings was confirmed by TEM observation. Nanoindentation tests showed that both the values of hardness (H) and reduced elastic modulus (E{sub r}) of CrN/ZrSiN multilayers remained almost constant despite varying the bilayer thickness. The multilayer coatings exhibited higher H of 30 GPa and higher resistance to plastic deformation when compared to the single layer CrN and ZrSiN coatings.

36 MATERIALS SCIENCE↗

Comparative studies on the thermal stability and corrosion resistance of CrN, CrSiN, and CrSiN/AlN coatings

In this work, three kinds of Cr-based nitride coatings such as monolithic CrN, CrSiN coatings, and multilayered CrSiN/AlN coating with bilayer period of 3.0 nm were deposited on both Si (100) wafer and AISI H13 steel substrates by unbalanced magnetron sputtering. Thermal stability of these coatings was evaluated by annealing the coatings at temperatures between 600 and 1000 degree sign C for 30 min in air. In addition, the corrosion behaviors of these coatings were investigated by potentiodynamic polarization tests in a deaerated 3.5 wt. % NaCl solution at 40 degree sign C. Results from annealing test show the monolithic CrN and CrSiN coatings were completely oxidized after annealed at 800 and 900 degree sign C, and their cross sectional images and atomic force microscopy showed a loose and very porous morphology due to the oxidation. Also, the hardness values of the monolithic CrN and CrSiN coatings were decreased significantly from 22 and 27 GPa to 8 and 14 GPa, respectively. However, the multilayered CrSiN/AlN coating still exhibited a dense microstructure without visible change after annealed at 1000 degree sign C, and moreover, the relatively high hardness of 25 GPa was maintained. The superior thermal stability of the CrSiN/AlN multilayer coating could be attributed to the formation of the dense and stable oxidation barrier consisted of the Al{sub 2}O{sub 3}, Cr{sub 2}O{sub 3}, and amorphous SiO{sub 2} phases near the surface region, which retard the diffusion of oxygen into the coating. In the potentiodynamic polarization test results, it was found that the significantly improved corrosion resistance of the multilayered CrSiN/AlN coating was observed in comparison with those from the monolithic CrN and CrSiN coatings, and its corrosion current density (i{sub corr}) and protective efficiency were measured to be approximately 4.21 {mu}A/cm{sup 2} and 95%, respectively.

36 MATERIALS SCIENCE↗

Does hydrogen change the fullerenelike structure in CN{sub x} thin films?

The authors have reported the structure of the nanoclusters in carbon nitride thin films before [D. Roy et al., Phys. Rev. B 70, 035406 (2004)]. In this work, effects of the addition of hydrogen in the deposition gas mixture on the structures of carbon nitride thin films prepared by magnetron sputtering were investigated using Raman spectroscopy. Raman measurements showed that the structures of carbon nanoclusters remained unaffected by the addition of hydrogen in the carbon nitride films. On the other hand, the structures of amorphous thin films were affected by the addition of hydrogen in the deposition gas mixture. These are explained in terms of changes in the ratios of the D-peak to the G-peak intensities and shifts in the G-peak centers.

36 MATERIALS SCIENCE↗

Influence of annealing and Ag doping on structural and optical properties of indium tin oxide thin films

Indium tin oxide (ITO) and Ag (1.2{+-}0.1 at. %)-ITO films with the thickness of 130 nm were deposited on glass substrates at room temperature by dc magnetron sputtering and postannealed at the temperature range of 200-400 deg. C. By calculating the x-ray diffraction data, the lattice constants of all samples were obtained and the results show that the annealing led to the smaller lattice constants and the Ag doping resulted in the further lattice distortion. The refractive index n and extinction coefficient k of all samples were extracted from the transmittance spectra by means of the spectroscopic ellipsometry optimization method. Ag-ITO film annealed at 400 deg. C has the high transmittance of 80%-90% in the visible wavelength range. Ag doping dramatically increased the extinction coefficient k of ITO films in UV wavelength range but almost without change in it in visible band. Meanwhile, by contrast with ITO films, Ag-ITO films show much higher n values than that of ITO films. Finally, the optical band gaps of all samples were determined, and it has been found that there is almost no difference of band gaps between ITO and Ag-ITO films. The reasons of the influence of annealing and Ag doping on structural and optical properties of ITO thin films are discussed.

36 MATERIALS SCIENCE↗

Effect of AC target power on AlN film quality

The influence of alternating current (AC) target power on film stress, roughness, and x-ray diffraction rocking curve full width half maximum (FWHM) was examined for AlN films deposited using S-gun magnetron sputtering on insulative substrates consisting of Si wafers with 575 nm thermal oxide. As the AC target power was increased from 5 to 8 kW, the deposition rate increased from 9.3 to 15.9 A/s, film stress decreased from 81 to −170 MPa, and the rocking curve FWHM increased from 0.98 to 1.03°. AlN film behavior is observed to change with target life; films deposited at 200 kWh target life were approximately 40 MPa more compressive and had 0.02° degree higher rocking curve FWHM values than films deposited at 130 kWh. AlN films deposited in two depositions were compared with films deposited in a single deposition, in order to better characterize the growth behavior and properties of AlN films deposited on an existing AlN film, which is not well understood. Two deposition films, when compared with single deposition films, showed no variation in residual stress trends or grain size behavior, but the average film roughness increased from 0.7 to 1.4 nm and rocking curve FWHM values increased by more than 0.25°.

36 MATERIALS SCIENCE↗

Growth mechanism and optical properties of Ti thin films deposited onto fluorine-doped tin oxide glass substrate

In this work, a detailed study of the influence of the thickness on the morphological and optical properties of titanium (Ti) thin films deposited onto rough fluorine-doped tin oxide glass by d.c. magnetron sputtering is carried out. The films were characterized by several methods for composition, crystallinity, morphology, and optical properties. Regardless of the deposition time, all the studied Ti films of 400, 1500, 2000, and 2500 nm in thickness were single crystalline in the α-Ti phase and also very similar to each other with respect to composition. Using the atomic force microscopy (AFM) technique, the authors analyzed the roughness evolution of the Ti films characteristics as a function of the film thickness. By applying the dynamic scaling theory to the AFM images, a steady growth roughness exponent α = 0.72 ± 0.02 and a dynamic growth roughness exponent β = 0.22 ± 0.02 were determined. The value of α and β are consistent with nonlinear growth model incorporating random deposition with surface diffusion. Finally, measuring the reflection spectra of the samples by a spectrophotometer in the spectral range of 300–1100 nm allowed us to investigate the optical properties. The authors observed the increments of the reflection of Ti films with thickness, which by employing the effective medium approximation theory showed an increase in thickness followed by an increase in the volume fraction of metal.

36 MATERIALS SCIENCE↗